RESIN EMULSIFIERS | Revchem Composites

09TEM1_TDS.pdf

Sat, 27 Sep 2025 09:40:15 +0000

Technical
Data SheetA Walker Industries Company
853-NB RESIN CLEANER
853-NBResin Cleaneris a highly effective emulsion cleaner used to remove a broad spectrum of industrial soils
including petroleum-based oils and greases as well as inks, uncured paints and lacquers, and silica (dirt) deposits.
Typical applications for 853-NBResin Cleanerinclude general maintenance tasks, parts washers, cleaning shop
floors, machine tools and production soil removal using heated turbulator tanks, foam guns, pressure washers and
hand wipe-down. After cleaning and with only moderate rinsing, polished surfaces will generally be free of both
waterbreaks and hazy detergent films.
Product Description
Physical Properties
Appearance Blue liquid, slight glycol ether odor.
Density 8.69 – 8.77 lbs/US Gal
(@78 F)
pH 11.50 – 12.50
(@78 F)
Refractive Index 23.0 – 23.4 %
(@78 F)
Non-flammable for ease of handling
853-NBResin Cleaneris as effective at ambient temperatures as most products are when they are heated.
Because it is a water-base emulsion without the flammability hazards of conventional solvent-base cleaners,
853-NBResin Cleanercan be safely heated to increase its performance even more. Economical to use –
concentrated and recyclable to last longer.
Economical to use -concentrated and recyclable to last longer.
853-NBis highly concentrated -dilute one volume with up to 10 volumes of water for use. And to add to its
economy, when properly filtered, 853-NBcan be reused up to three times.
Tools come clean -with no sticky residues
The dissolving action of acetone or methylene chloride frequently leaves behind sticky surfaces. 853-NBworks
to settle out most of the residues to leave your tools clean and tack-free.
Water-base formulation more environmentally sound than conventional solvents
853-NBcontains no ozone-depleting chemicals and does not qualify as a hazardous waste under current RCRA
regulations. Dispose of wastes and spills, in conjunction with federal, state and local laws governing non-
hazardous materials.
Features and Benefits

Technical
Data SheetA Walker Industries Company
Provides excellent performance over broad range of water hardness
853-NBcontrols hardwater ions which could otherwise interfere in the suspension and settling of resins.
Uses 3-way chemical action to prevent resins adhering to surfaces
853-NBbreaks up uncured resins and temporarily prevents the cross-linking of uncured resin molecules, then
slows the action of catalysts so resins can be removed before they cure on unwanted surfaces. The chemistry of
853-NBhelps make your job easier.
Features and Benefits
CLEANING TOOLS AND EQUIPMENT (rollers, brushes, etc.)
Mix one volume853-NBResin Cleanerwith 10 volumes water. Although hot water is not required -853-NBResin
Cleanerworks as well cold as most products work when heated -it cleans even more effectively at temperatures of
104 -107 F. Simply immerse your fixed brushes and metal and plastic rollers in the cleaning solution. Either manual
agitation or automated brush and tool cleaning equipment can then be used to loosen residues from tool surfaces.
With some resins and with more advanced gel states, more vigorous agitation may be necessary. After cleaning,
rinse toolsin clean water to remove residual 853-NB853-NBResin Cleanerand clinging sediments. Use com-
pressed air to remove the rinse water then complete the drying process on a drying rack or with water-absorbing
solvent.
GUN FLUSHING
853-NBResin Cleanerhas been tested with great success by Venus-Gusmer, a leading manufacturer of resin
application systems. Best results are achieved using one volume 853-NBResin Cleanerdiluted with five volumes
water. Flush guns with the solution, introducing air into the line while flushing if possible. Rinse with water if the gun
is to be out of service for more than eight hours. Be sure to purge any residual water from the tip of the gun before
spraying resin and chop on a part.
Application
After hardening and air-drying, the separated resins need to be disposed in accordance with local regulations. Those
resins that remain in a pasty state can be mixed with catalyzed resin and hardened for disposal or subsequent use.
Commercial evaporators can be used to economically dispose of 50 to 1000 gallons per day of spent liquid cleaning
solution. Contact air quality regulators for the necessary permits.
In some instances, the spent 853-NBsolution can be discarded in the sanitary sewer system. Before discharging
spent solution into the sanitary sewer, local authorities must be contacted for approval.
Waste Disposal
Before using this product, please read the Safety Data Sheet Numberfor853-NBResin Cleanerand follow the
recommended safety instructions.
Additional Notes

Technical
Data SheetA Walker Industries Company
Products and information are intended for use by persons having skill and knowledge in the industry at their own discretion and risk. Product Bulletins are intended to provide general information
on Walker Emulsions products and should not be construed as guaranteeing specific properties of the product described or suitability for a particular application. Users cannot anticipate all
conditions under which our products, or the products of other manufacturers are combined, stored or may be used. Users are advised to make their own tests to determine suitability. Unless
otherwise agreed to in writing, Walker Emulsions products are sold without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and
use of our products, whether used alone or in combination with other products.
Disclaimer
www.walkerind.com
Walker Emulsions Limited
4365 Corporate Drive
Burlington, ON, CAN L7L 5P7
905-336-1216
888-636-1216
Walker Emulsions Inc.
4401 SE Johnson Creek Blvd
Portland, OR, USA 97222
503-659-1708
800-554-4666
Walker Emulsions (USA) Inc.
700 Prosperity Drive
Orangeburg, SC, USA 29115
803-585-0149
855-229-9242

09TEM-5_TDS.pdf

Sat, 27 Sep 2025 09:40:14 +0000

Safety
Data SheetA Walker Industries Company
PRODUCT: 853-NB RESIN CLEANER
Section 01: Chemical Product and Company Identification
Walker Emulsions Inc.
4401 SE Johnson Creek Blvd
Portland, OR, USA 97222
503-659-1708
Manufacturer
As aboveSupplier
Walker Emulsions Inc. – Department of Research and Development
Contact: Steven M. Brown 503-659-1708
Prepared By
May 01, 2012Preparation Date
May 23, 2018Revision Date
853-NB Resin CleanerProduct Name
103149 (prior to 11/1/15: PT2510.32)Product Number
MixtureCAS Number
Not Applicable/MixtureChemical Formula
Alkaline CleanerMaterial Use
Infotrac (800) 535-505324 Hour Emergency Number
Section 02: Hazards Identification
WarningSignal Word:
H319 Causes serious eye irritation.
Serious eye damage/eye irritation, Category 2/2A
H312 Harmful in contact with skin.
Acute toxicity, Category 4
H335 + H336 May cause respiratory irritation, drowsiness or dizziness.
Specific target organ toxicity-single exposure, Category 3
H302 Harmful if swallowed.
Acute toxicity, Category 4
Hazards:
P102 Keep out of reach of children.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P262 Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
Prevention:
P301 + P315 + P330 + P331 IF SWALLOWED: Get immediate medical
advice/attention. Rinse mouth. DO NOT INDUCE vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all
contaminated clothing. Rinse skin with water/shower.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P304 + P341 IF INHALED: If breathing is difficult, remove victim to fresh air and
keep at rest in a position comfortable for breathing.
P315 + P342: If experiencing respiratory symptoms, get medical advice/attention.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention.
Response:
P501: Dispose of contents/container in accordance with local regulations.Disposal:
Page 1 of 6

Safety
Data SheetA Walker Industries Company
PRODUCT: 853-NB RESIN CLEANER
Section 02: Hazards Identification
Effects of Acute Exposure
Causes serious irritation to eyes.Eye Contact
Ingestion of this material may be harmful.Ingestion
Inhalation of vapors or mists may cause pulmonary irritation, dizziness, and
nausea.
Inhalation
May be absorbed through skin.Skin Absorption
Causes serious irritation to skin.Skin Contact
Effects of Chronic Exposure
Prolonged or repeated breathing of sprays, mists, or dusts in excess of the
suggested TLV may cause severe nasal and respiratory irritations.
Inhalation
Prolonged or repeated contact with skin may cause irritation, redness, itching
and/or be potentially absorbed in harmful amounts. Persons with pre-existing
dermatitis may be more susceptible to the effects of this product.
Skin
Section 03: Composition and Information on Ingredients
Hazardous Ingredients
Exposure LevelsC.A.S. # TSCAHazard Rating LD/LC, Route, SpeciesIngred / %
SODIUM METASILICATE
1 – 5 6834-92-0
See Section 11
Not AvailableY Health:2, fire:0, React:0, PP:E
LD/50:
LC/50:
1-METHOXY PROPANOL
1 – 5 107-98-2
See Section 11
See Section 11Y Health:2, Fire:3, React: 0,
PP:G
LD/50:
LC/50:
DIPROPYLENE GLYCOL METHYL ETHER
1-5 34590-94-8
See Section 11
Not AvailableY Health:1, fire:2, React:0, PP:G
LD/50:
LC/50:
HEALTH: 2, FIRE: 1, REACTIVITY: 0, PPI: XHMIS Rating (0-4)
HEALTH
2
PROTECTIVE
EQUIPMENT
X
REACTIVITY
0
FLAMMABILITY
1
Section 04: First Aid Measures
Remove contaminated clothing and wash affected skin area with soap and water.
If irritation persists, contact a physician.
Skin Contact
Remove person to fresh air. If not breathing, give artificial respiration. If breathing
is difficult, give oxygen. Call a physician promptly.
Inhalation
DO NOT induce vomiting. Call a physician promptly. Give large quantities of water
or milk. Never give anything orally to an unconscious or convulsing person.
Ingestion
Immediately flush eyes with plenty of water for at least 15 minutes. Call a physician
promptly.
Eye Contact
Page 2 of 6

Safety
Data SheetA Walker Industries Company
PRODUCT: 853-NB RESIN CLEANER
Section 05: Fire and Explosion Data
>200 F, (93 C), SetaflashFlash Point, Method
IIIAFlammability
Use self-contained breathing apparatus with full facepiece.Special Procedures
Not AvailableFire Hazards
Never use welding or cutting torch on or near drum, even empty, because product
or residue can ignite potentially explosively.
Explosion Hazards
Not AvailableHazardous Combustion Products
Not AvailableExplosive Range:
Water spray, dry chemical, chemical foam, or carbon dioxide.Extinguishing Media
Section 06: Accidental Release Measures
SMALL SPILLS: Use an inert material such as kitty litter, sawdust or cellulosic
based absorbent to absorb spilled product. Flush spill area with plenty of water.
Rinsate may require special processing and approval prior to discharging to a
sanitary sewer system.
LARGE SPILLS: Use caution; spilled material may be extremely slippery. Contain
spilled material immediately and prevent from entering the sewer system. Use inert
materials mentioned above to dam, dike, divert or absorb spill. Absorb or vacuum
spilled material for proper disposal options.
Leak/Spill
Section 07: Handling and Storage
Containers of this material may be hazardous when emptied. Since emptied
containers retain product residues (vapor, liquid, and/or solid), all hazard
precautions given in this data sheet should be observed. Rinse container with 1-2
gallons of water and recycle into end-use process.
Handling
Section 08: Exposure Control and Personal Protection
Protective Equipment
Wear approved splashproof chemical goggles.Eye/Type
None normally required.Respiratory/Type
Neoprene rubber gloves are recommended.Gloves/Type
Use adequate ventilation to keep airborne concentrations below the exposure
standard.
Ventilation Requirements
Use as needed to keep this material off clothing and skin.Other Protective Equipment
SODIUM METASILICATE 1-METHOXY PROPANOL DIPROPYLENE
GLYCOL
METHYL ETHER
Occupational Exposure Limits
N/est 100.00 PPM 100.00 PPMACGIH TLV
N/est N/est N/estACGIH TLV-C
N/est 150.00 PPM 150.00 PPMACGIH STEL
N/est 150.00 PPM 150.00 PPMOSHA STEL
N/est 100.00 PPM 100.00 PPMOSHA PEL
Section 09: Physical and Chemical Properties
LiquidPhysical State
Page 3 of 6

Safety
Data SheetA Walker Industries Company
PRODUCT: 853-NB RESIN CLEANER
Section 09: Physical and Chemical Properties
BlueAppearance
Not AvailableViscosity (cPs, water=1)
Not AvailableVolatility (wt%)
Not applicableVolatility (vol%)
1.04839Specific Gravity
11.95-12.05pH
MiscibleSolubility in Water
Slight glycol etherOdor
Not AvailableOdor threshold (ppm)
(WATER) 17 @ 68 F (20 C)Vapor Pressure (mm Hg)
Non volatileVapor Density (air=1)
UnavailableEvaporation Rate (n-butyl
acetate=1)
Not AvailableCoefficient of water/oil distribution
(WATER) 212 F (100 C)Boiling Range
Not AvailablePartition Coefficient
Not AvailableFreezing Point
Not AvailableMelting Point
Not availableVOC
Not AvailableFlash Point (TCC)
MixtureMolecular Weight
Not AvailableExplosive limits
Not AvailableFlammability (solid, gas)
Not AvailableAuto-ignition temperature
Not Available Decomposition temperature
Section 10: Stability and Reactivity Data
Hazardous polymerization will not occur.Hazardous Polymerization
This product is stable.Chemical Stability
Acids, strong oxidizing agents.Incompatibility
Acids, strong oxidizing agents.Conditions to Avoid
Not AvailableReactivity Conditions
Carbon monoxide and/or carbon dioxide.Hazardous Products of
Decomposition (thermal)
Section 11: Toxicological Information
Eye contact, potential skin absorption, inhalation, and ingestion.Routes of Entry
Exposure Limits
Page 4 of 6

Safety
Data SheetA Walker Industries Company
PRODUCT: 853-NB RESIN CLEANER
Section 11: Toxicological Information
SODIUM METASILICATE:
Oral, Rat, adult 1,153 mg/kg
Skin, Rat, adult 250 PPM
1-METHOXY PROPANOL:
Oral, Rat, adult 5,660 PPM
Skin, Rat, adult 13,000 PPM
DIPROPYLENE GLYCOL METHYL ETHER:
Oral, Rat, adult 5.4 ml/kg
Skin, Rabbit, adult 20
LD/50
1-METHOXY PROPANOL:
Inhalation, Rat, adult 7,000 PPM
LC/50
Not AvailableTWA
This product does not contain any substance(s) listed as a carcinogen by NTP,
IARC, or OSHA.
Carcinogenicity
None KnownTeratogenicity/Mutagenicity
None KnownReproductive Effects
None KnownSynergistic Materials
None available for product.Additional Toxicological Data
Section 12: Ecological Information
Not AvailableEnvironmental
Aquatic toxicity not available.Ectotoxicological Information
Not AvailableBiodegradability
Section 13: Disposal Considerations
NONEEPA Hazardous Waste Number
Waste product must be disposed of properly under Federal and State regulations
for industrial waste. Absorbed material on cellulosic or similar synthetic absorbents
may be incinerated pending approvals. This product, as delivered, when spilled or
disposed of is not regulated under 40 CFR Part 261 of the RCRA Hazardous
Waste Regulations.
Waste Disposal
Section 14: Transport Information
NONEU.N. #
NAT.D.G. Classification
Not HazardousD.O.T. Classification
D2BWHMIS Classification
Section 15: Regulatory Information
IrritantEEC Classification
This product is not regulated as a hazardous substance.U.S. Federal Regulations
Page 5 of 6

Safety
Data SheetA Walker Industries Company
PRODUCT: 853-NB RESIN CLEANER
Section 15: Regulatory Information
SARA TITLE III SECTION 313:
This product contains the following toxic chemicals subject to the reporting
requirements of Section 313 of the Emergency Planning and Community Right to
Know Act of 1986 and of 40 CFR 372:
Chemical Name: DIPROPYLENE GLYCOL METHYL ETHER, CAS#: 34590-94-8,
<5% U.S. Federal Regulations All ingredients are listed in the TSCA inventory.US TSCA Section 16: Other Information Do not dilute or mix with other materials unless advised by supplier. The information and recommendations contained herein are based upon data believed to be correct. However, no guarantee or warranty of any kind, expressed or implied, is made with respect to the information provided. Page 6 of 6

09PROPC-D_TDS.pdf

Sat, 27 Sep 2025 09:40:13 +0000

Technical Data Sheet

Propylene Carbonate

Property Units Limits Results Method
Purity % 99.5 min
Appearance
Color 16 max
PH
Water % 0.05 max
Specific Gravity @
20C
g/cm3 1.203 +/- 0.005

Disclaimer: These specifications represent the quality of our product in general
and may vary from batch to batch and producer to producer. If you are looking
for particular specifications please call our office or email your representative.

Shell Oil and Chemical Distributor
P.O. Box 39524
4578 Brazil Street
Los Angeles, CA 90039
Tel: (323) 245-2345
(818) 242-8486
Fax (818) 242-7804
www.aglayne.com

09MTW132-D_TDS.pdf

Sat, 27 Sep 2025 09:40:12 +0000

Technical
Data SheetA Walker Industries Company
Marathon Tool Wash 132
Marathon Tool Wash 132is a highly effective emulsion cleaner used to remove a broad spectrum of industrial soils
including petroleum-based oils and greases as well as inks, uncured paints and lacquers, and silica (dirt) deposits.
Typical applications for Marathon Tool Wash 132include general maintenance tasks, parts washers, cleaning shop
floors, machine tools and production soil removal using heated turbulator tanks, foam guns, pressure washers and
hand wipe-down. After cleaning and with only moderate rinsing, polished surfaces will generally be free of both
waterbreaks and hazy detergent films.
Product Description
Physical Properties
Non-flammable for ease of handling
Marathon Tool Wash 132is as effective at ambient temperatures as most products are when they are heated.
Because it is a water-base emulsion without the flammability hazards of conventional solvent-base cleaners,
Marathon Tool Wash 132can be safely heated to increase its performance even more. Economical to use –
concentrated and recyclable to last longer.
Economical to use -concentrated and recyclable to last longer.
Marathon Tool Wash 132is highly concentrated -dilute one volume with up to 10 volumes of water for use.
And to add to its economy, when properly filtered, Marathon Tool Wash 132can be reused up to three
times.
Tools come clean -with no sticky residues
The dissolving action of acetone or methylene chloride frequently leaves behind sticky surfaces. Marathon
Tool Wash 132works to settle out most of the residues to leave your tools clean and tack-free.
Water-base formulation more environmentally sound than conventional solvents
Marathon Tool Wash 132contains no ozone-depleting chemicals and does not qualify as a hazardous waste
under current RCRA regulations. Dispose of wastes and spills, in conjunction with federal, state and local laws
governing non-hazardous materials.
Features and Benefits

Technical
Data SheetA Walker Industries Company
Provides excellent performance over broad range of water hardness
Marathon Tool Wash 132controls hardwater ions which could otherwise interfere in the suspension and
settling of resins.
Uses 3-way chemical action to prevent resins adhering to surfaces
Marathon Tool Wash 132breaks up uncured resins and temporarily prevents the cross-linking of uncured
resin molecules, then slows the action of catalysts so resins can be removed before they cure on unwanted
surfaces. The chemistry of Marathon Tool Wash 132helps make your job easier.
Features and Benefits
CLEANING TOOLS AND EQUIPMENT (rollers, brushes, etc.)
Mix one volumeMarathon Tool Wash 132with 10 volumes water. Although hot water is not required -Marathon
Tool Wash 132works as well cold as most products work when heated -it cleans even more effectively at tempera-
tures of 104 -107 F. Simply immerse your fixed brushes and metal and plastic rollers in the cleaning solution.
Either manual agitation or automated brush and tool cleaning equipment can then be used to loosen residues from
tool surfaces. With some resins and with more advanced gel states, more vigorous agitation may be necessary.
After cleaning, rinse toolsin clean water to remove residual Marathon Tool Wash 132 and clinging sediments. Use
compressed air to remove the rinse water then complete the drying process on a drying rack or with water-absorbing
solvent.
GUN FLUSHING
Marathon Tool Wash 132has been tested with great success by Venus-Gusmer, a leading manufacturer of resin
application systems. Best results are achieved using one volume Marathon Tool Wash 132diluted with five volumes
water. Flush guns with the solution, introducing air into the line while flushing if possible. Rinse with water if the gun
is to be out of service for more than eight hours. Be sure to purge any residual water from the tip of the gun before
spraying resin and chop on a part.
Application
After hardening and air-drying, the separated resins need to be disposed in accordance with local regulations. Those
resins that remain in a pasty state can be mixed with catalyzed resin and hardened for disposal or subsequent use.
Commercial evaporators can be used to economically dispose of 50 to 1000 gallons per day of spent liquid cleaning
solution. Contact air quality regulators for the necessary permits.
In some instances, the spent Marathon Tool Wash 132solution can be discarded in the sanitary sewer system.
Before discharging spent solution into the sanitary sewer, local authorities must be contacted for approval.
Waste Disposal
Before using this product, please read the Safety Data Sheet NumberforMarathon Tool Wash 132and follow the
recommended safety instructions.
Additional Notes

09TEM1_SDS.pdf

Sat, 27 Sep 2025 06:11:13 +0000

09TEM-5_SDS.pdf

Sat, 27 Sep 2025 06:11:12 +0000

Safety
Data SheetA Walker Industries Company
PRODUCT: Marathon Tool Wash 132
Section 01: Chemical Product and Company Identification
Walker Emulsions Inc.
4401 SE Johnson Creek Blvd
Portland, OR, USA 97222
503-659-1708
Manufacturer
As aboveSupplier
Walker Emulsions Inc. – Department of Research and Development
Contact: Steven M. Brown 503-659-1708
Prepared By
May 01, 2012Preparation Date
May 23, 2018Revision Date
Marathon Tool Wash 132Product Name
105030 (prior to 11/1/15: PT2501.32)Product Number
MixtureCAS Number
Not Applicable/MixtureChemical Formula
Alkaline CleanerMaterial Use
Infotrac (800) 535-505324 Hour Emergency Number
Section 02: Hazards Identification
WarningSignal Word:
H319 Causes serious eye irritation.
Serious eye damage/eye irritation, Category 2/2A
H312 Harmful in contact with skin.
Acute toxicity, Category 4
H335 + H336 May cause respiratory irritation, drowsiness or dizziness.
Specific target organ toxicity-single exposure, Category 3
H302 Harmful if swallowed.
Acute toxicity, Category 4
Hazards:
P102 Keep out of reach of children.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P262 Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
Prevention:
P301 + P315 + P330 + P331 IF SWALLOWED: Get immediate medical
advice/attention. Rinse mouth. DO NOT INDUCE vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all
contaminated clothing. Rinse skin with water/shower.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P304 + P341 IF INHALED: If breathing is difficult, remove victim to fresh air and
keep at rest in a position comfortable for breathing.
P315 + P342: If experiencing respiratory symptoms, get medical advice/attention.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention.
Response:
P501: Dispose of contents/container in accordance with local regulations.Disposal:
Page 1 of 6

Safety
Data SheetA Walker Industries Company
PRODUCT: Marathon Tool Wash 132
Section 02: Hazards Identification
Effects of Acute Exposure
Causes serious irritation to eyes.Eye Contact
Ingestion of this material may be harmful.Ingestion
Inhalation of vapors or mists may cause pulmonary irritation, dizziness, and
nausea.
Inhalation
May be absorbed through skin.Skin Absorption
Causes serious irritation to skin.Skin Contact
Effects of Chronic Exposure
Prolonged or repeated breathing of sprays, mists, or dusts in excess of the
suggested TLV may cause severe nasal and respiratory irritations.
Inhalation
Prolonged or repeated contact with skin may cause irritation, redness, itching
and/or be potentially absorbed in harmful amounts. Persons with pre-existing
dermatitis may be more susceptible to the effects of this product.
Skin
Section 03: Composition and Information on Ingredients
Hazardous Ingredients
Exposure LevelsC.A.S. # TSCAHazard Rating LD/LC, Route, SpeciesIngred / %
SODIUM METASILICATE
1 – 5 6834-92-0
See Section 11
Not Available
LD/50:
LC/50:
1-METHOXY PROPANOL
1 – 5 107-98-2
See Section 11
See Section 11
LD/50:
LC/50:
DIPROPYLENE GLYCOL METHYL ETHER
1-5 34590-94-8
See Section 11
Not Available
LD/50:
LC/50:
HEALTH: 2, FIRE: 1, REACTIVITY: 0, PPI: XHMIS Rating (0-4)
HEALTH
2
PROTECTIVE
EQUIPMENT
X
REACTIVITY
0
FLAMMABILITY
1
Section 04: First Aid Measures
Remove contaminated clothing and wash affected skin area with soap and water.
If irritation persists, contact a physician.
Skin Contact
Remove person to fresh air. If not breathing, give artificial respiration. If breathing
is difficult, give oxygen. Call a physician promptly.
Inhalation
DO NOT induce vomiting. Call a physician promptly. Give large quantities of water
or milk. Never give anything orally to an unconscious or convulsing person.
Ingestion
Immediately flush eyes with plenty of water for at least 15 minutes. Call a physician
promptly.
Eye Contact
Section 05: Fire and Explosion Data
Page 2 of 6

Safety
Data SheetA Walker Industries Company
PRODUCT: Marathon Tool Wash 132
Section 05: Fire and Explosion Data
>200 F, (93 C), SetaflashFlash Point, Method
IIIAFlammability
Use self-contained breathing apparatus with full facepiece.Special Procedures
Not AvailableFire Hazards
Never use welding or cutting torch on or near drum, even empty, because product
or residue can ignite potentially explosively.
Explosion Hazards
Not AvailableHazardous Combustion Products
Not AvailableExplosive Range:
Water spray, dry chemical, chemical foam, or carbon dioxide.Extinguishing Media
Section 06: Accidental Release Measures
SMALL SPILLS: Use an inert material such as kitty litter, sawdust or cellulosic
based absorbent to absorb spilled product. Flush spill area with plenty of water.
Rinsate may require special processing and approval prior to discharging to a
sanitary sewer system.
LARGE SPILLS: Use caution; spilled material may be extremely slippery. Contain
spilled material immediately and prevent from entering the sewer system. Use inert
materials mentioned above to dam, dike, divert or absorb spill. Absorb or vacuum
spilled material for proper disposal options.
Leak/Spill
Section 07: Handling and Storage
Containers of this material may be hazardous when emptied. Since emptied
containers retain product residues (vapor, liquid, and/or solid), all hazard
precautions given in this data sheet should be observed. Rinse container with 1-2
gallons of water and recycle into end-use process.
Handling
Section 08: Exposure Control and Personal Protection
Protective Equipment
Wear approved splashproof chemical goggles.Eye/Type
None normally required.Respiratory/Type
Neoprene rubber gloves are recommended.Gloves/Type
Use adequate ventilation to keep airborne concentrations below the exposure
standard.
Ventilation Requirements
Use as needed to keep this material off clothing and skin.Other Protective Equipment
SODIUM METASILICATE 1-METHOXY PROPANOL DIPROPYLENE
GLYCOL
METHYL ETHER
Occupational Exposure Limits
N/est 100.00 PPM 100.00 PPMACGIH TLV
N/est N/est N/estACGIH TLV-C
N/est 150.00 PPM 150.00 PPMACGIH STEL
N/est 150.00 PPM 150.00 PPMOSHA STEL
N/est 100.00 PPM 100.00 PPMOSHA PEL
Section 09: Physical and Chemical Properties
LiquidPhysical State
Page 3 of 6

Safety
Data SheetA Walker Industries Company
PRODUCT: Marathon Tool Wash 132
Section 09: Physical and Chemical Properties
BlueAppearance
Not AvailableViscosity (cPs, water=1)
Not AvailableVolatility (wt%)
Not applicableVolatility (vol%)
1.04839Specific Gravity
11.95-12.05pH
MiscibleSolubility in Water
Slight glycol etherOdor
Not AvailableOdor threshold (ppm)
(WATER) 17 @ 68 F (20 C)Vapor Pressure (mm Hg)
Non volatileVapor Density (air=1)
UnavailableEvaporation Rate (n-butyl
acetate=1)
Not AvailableCoefficient of water/oil distribution
(WATER) 212 F (100 C)Boiling Range
Not AvailablePartition Coefficient
Not AvailableFreezing Point
Not AvailableMelting Point
Not availableVOC
Not AvailableFlash Point (TCC)
MixtureMolecular Weight
Not AvailableExplosive limits
Not AvailableFlammability (solid, gas)
Not AvailableAuto-ignition temperature
Not Available Decomposition temperature
Section 10: Stability and Reactivity Data
Hazardous polymerization will not occur.Hazardous Polymerization
This product is stable.Chemical Stability
Acids, strong oxidizing agents.Incompatibility
Acids, strong oxidizing agents.Conditions to Avoid
Not AvailableReactivity Conditions
Carbon monoxide and/or carbon dioxide.Hazardous Products of
Decomposition (thermal)
Section 11: Toxicological Information
Eye contact, potential skin absorption, inhalation, and ingestion.Routes of Entry
Exposure Limits
Page 4 of 6

Safety
Data SheetA Walker Industries Company
PRODUCT: Marathon Tool Wash 132
Section 11: Toxicological Information
SODIUM METASILICATE:
Oral, Rat, adult 1,153 mg/kg
Skin, Rat, adult 250 PPM
1-METHOXY PROPANOL:
Oral, Rat, adult 5,660 PPM
Skin, Rat, adult 13,000 PPM
DIPROPYLENE GLYCOL METHYL ETHER:
Oral, Rat, adult 5.4 ml/kg
Skin, Rabbit, adult 20
LD/50
1-METHOXY PROPANOL:
Inhalation, Rat, adult 7,000 PPM
LC/50
Not AvailableTWA
This product does not contain any substance(s) listed as a carcinogen by NTP,
IARC, or OSHA.
Carcinogenicity
None KnownTeratogenicity/Mutagenicity
None KnownReproductive Effects
None KnownSynergistic Materials
None available for product.Additional Toxicological Data
Section 12: Ecological Information
Not AvailableEnvironmental
Aquatic toxicity not available.Ectotoxicological Information
Not AvailableBiodegradability
Section 13: Disposal Considerations
NONEEPA Hazardous Waste Number
Waste product must be disposed of properly under Federal and State regulations
for industrial waste. Absorbed material on cellulosic or similar synthetic absorbents
may be incinerated pending approvals. This product, as delivered, when spilled or
disposed of is not regulated under 40 CFR Part 261 of the RCRA Hazardous
Waste Regulations.
Waste Disposal
Section 14: Transport Information
NONEU.N. #
NAT.D.G. Classification
Not HazardousD.O.T. Classification
D2BWHMIS Classification
Section 15: Regulatory Information
IrritantEEC Classification
This product is not regulated as a hazardous substance.U.S. Federal Regulations
Page 5 of 6

Safety
Data SheetA Walker Industries Company
PRODUCT: Marathon Tool Wash 132
Section 15: Regulatory Information
SARA TITLE III SECTION 313:
This product contains the following toxic chemicals subject to the reporting
requirements of Section 313 of the Emergency Planning and Community Right to
Know Act of 1986 and of 40 CFR 372:
Chemical Name: DIPROPYLENE GLYCOL METHYL ETHER, CAS#: 34590-94-8,
<5% U.S. Federal Regulations All ingredients are listed in the TSCA inventory.US TSCA Section 16: Other Information Do not dilute or mix with other materials unless advised by supplier. The information and recommendations contained herein are based upon data believed to be correct. However, no guarantee or warranty of any kind, expressed or implied, is made with respect to the information provided. Page 6 of 6

09PROPC-D_SDS.pdf

Sat, 27 Sep 2025 06:11:11 +0000

SAFETY DATA SHEET
Date Issued : 07/31/2018
SDS No : 0962
Propylene Carbonate
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Propylene Carbonate
GENERAL USE: Used as a solvent in surface coatings, paint strippers, paint and finish removers, cosmetics.
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
Shrieve Chemical Company
1755 Woodstead Ct.
The Woodlands, TX 77380
Emergency Contact: Audris King
Emergency Phone: (800) 424-9300
Alternate Contact: Sue Shelver
Customer Service: (800) 367-4226
Poison Control Center (Medical) :(877) 800-5553
CHEMTREC (US Transportation) :(800) 424-9300
International: (703) 527-3887
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATIONS
Health:
Eye Irritation, Category 2A
GHS LABEL
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
Exclamation
mark
SIGNAL WORD: WARNING
HAZARD STATEMENTS
H319: Causes serious eye irritation.
PRECAUTIONARY STATEMENTS
Prevention:
P264: Wash skin thoroughly after handling.
9114277V: Wear eye protection/face protection.
Response:
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P337+P313: If eye irritation persists: Get medical advice/attention.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Page 1 of 4

Chemical Name Wt.% CAS
1,3-dioxolan-2-one, 4-methyl- 100 108-32-7
4. FIRST AID MEASURES
EYES: Immediately flush eyes with a continuous water stream for at least 20 minutes. Lifting the upper and lower eyelids. If
irritation persists seek medical attention.
SKIN: Wash off with soap and plenty of water. Get medical attention if symptoms occur.
INGESTION: If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.
INHALATION: Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Dry chemical, CO2, Foam, Fog.
HAZARDOUS COMBUSTION PRODUCTS: Carbon oxides, other irritating fumes and smoke.
FIRE FIGHTING PROCEDURES: Standard procedure for chemical fires. Use extinguishing measures that are appropriate to
local circumstances and the surrounding environment.
FIRE FIGHTING EQUIPMENT: In case of fire, wear a full-face positive pressure self contained breathing apparatus and protective
suit.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Contain and soak up spill with absorbent material. Place residues in a suitable, sealed and labeled container.
LARGE SPILL: LARGE SPILLS: Shut off leak if safe to do so. Remove all possible sources of ignition. Contain spill with inert,
absorbent material. Reclam into recovery or salvage drums or vacuum truck for proper disposal. Treat residues as small spills.
ENVIRONMENTAL PRECAUTIONS
WATER SPILL: Prevent contamination of water. Prevent material from entering drains or watercourses using sand, earth or
other appropriate barriers. Do not flush into surface water or sanitary sewer system.
GENERAL PROCEDURES: Avoid contact with skin and eyes. Do not breathe vapors. Evacuate area of all non-essential
personnel.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Handle in accordance with good industrial hygiene and safety practices.
HANDLING: Use only in a well ventilated area. Avoid breathing (dust, vapor, mist, gas). Avoid contact with eyes, skin, and
clothing. Keep away from heat and flame. Wash hands before eating, drinking, or smoking.
STORAGE: Keep containers tightly closed in a dry, cool and well-ventilated place.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS: Good general ventilation should be sufficient to control any airborne levels.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear safety glasses (with side shields).
SKIN: Wear chemically resistant gloves.
RESPIRATORY: Use appropriate NIOSH approved respirator if necessary or risk of insufficient ventilation.
PROTECTIVE CLOTHING: Wear impermeable protective clothing.
WORK HYGIENIC PRACTICES: Handle in accordance with good industrial hygiene and safety practice. When using, do not eat,
drink, or smoke. Wash hands after handling.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
ODOR: Characteristic
COLOR: Colorless
pH: 7
Page 2 of 4

FLASH POINT AND METHOD: 116 C (241 F) Closed Cup
FLAMMABLE LIMITS: 1.8% (V) to 14.3% (V)
AUTOIGNITION TEMPERATURE: Not Available
VAPOR PRESSURE: 0.06 hPa at 25 C (77 F)
VAPOR DENSITY: Not Available
BOILING POINT: 240 C (464 F)
FREEZING POINT: -55 C (-67 F)
POUR POINT: Not Available
THERMAL DECOMPOSITION: 350 C
SOLUBILITY IN WATER: Soluble in water
SPECIFIC GRAVITY: 1.189 at 25 C (77 F)
VISCOSITY: Not Available
10. STABILITY AND REACTIVITY
REACTIVITY: None known.
HAZARDOUS POLYMERIZATION: Will not occur.
STABILITY: Stable under normal conditions.
CONDITIONS TO AVOID: None known.
HAZARDOUS DECOMPOSITION PRODUCTS: None known.
INCOMPATIBLE MATERIALS: Strong oxidizers, strong acids.
11. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY
DERMAL LD
50: > 2000 mg/kg
Notes: rabbit
ORAL LD
50: > 5000 mg/kg
Notes: rat
INHALATION LC
50: No data available.
SKIN CORROSION/IRRITATION: Direct skin contact may cause slight or mild, transient irritation.
SERIOUS EYE DAMAGE/IRRITATION: Causes serious eye irritation.
RESPIRATORY OR SKIN SENSITISATION: None known.
GERM CELL MUTAGENICITY: None known.
CARCINOGENICITY
NOTES: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or
confirmed human carcinogen by IARC, NTP, ACGIH or OSHA.
REPRODUCTIVE TOXICITY: None known.
STOT-SINGLE EXPOSURE: None known.
STOT-REPEATED EXPOSURE: None known.
ASPIRATION HAZARD: Not classified as an aspiration hazard.
12. ECOLOGICAL INFORMATION
BIOACCUMULATION/ACCUMULATION: Not Available
DISTRIBUTION: High water solubility indicates a high mobility in soil.
AQUATIC TOXICITY (ACUTE):
Algae EC50 Scenedesmus Subspicatus >900mg/l, 72 h
Crustacea EC50 Daphnia magna >1000 mg/l, 48 h
Fish LC50 Cyprinus carpio >1000 mg/l, 96 h
CHEMICAL FATE INFORMATION: Readily biodegradable.
Page 3 of 4

GENERAL COMMENTS: No other adverse environmental effects, photochemical ozone creation potential, endocrine disruption,
global warming potential are expected from this component.
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Dispose of contents/container to a licensed contractor or facility in accordance with local, state and federal
regulations.
14. TRANSPORT INFORMATION
COMMENTS: Not regulated for transportation by DOT, TDG, IMDG, and ICAO/IATA.
15. REGULATORY INFORMATION
UNITED STATES
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZ ATION ACT)
311/312 HAZARD CATEGORIES: Acute Health
313 REPORTABLE INGREDIENTS: None
302/304 EMERGENCY PLANNING
EMERGENCY PLAN: NA = Not Applicable
CERCLA (COMPREHENSIVE ENVIRONMENTAL RESPONSE, COMPE NSATION, AND LIABILITY ACT)
CERCLA REGULATORY: All components listed or exempt.
TSCA (TOXIC SUBSTANCE CONTROL ACT)
TSCA STATUS: All components listed or exempt.
CLEAN AIR ACT
40 CFR PART 68—RISK MANAGEMENT FOR CHEMICAL ACCID ENT RELEASE PREVENTION: NA = Not Applicable
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA )
29 CFR1910.119—PROCESS SAFETY MANAGEMENT OF HIGHL Y HAZARDOUS CHEMICALS: NA = Not Applicable
CALIFORNIA PROPOSITION 65: This product does not contain any chemicals known to the State of Califoria to cause cancer,
birth defects, or any other reproductive harm.
CANADA
DOMESTIC SUBSTANCE LIST (INVENTORY): All components are listed.
16. OTHER INFORMATION
REASON FOR ISSUE: Updated composition and hazards.
APPROVED BY: Audris King TITLE: HS&E Manager
PREPARED BY: Shane Phelps Date Prepared: 07/31/2018
HMIS RATING
HEALTH 2
FLAMMABILITY 1
PHYSICAL HAZARD 0
PERSONAL PROTECTION
NFPA CODES

1
2 0

MANUFACTURER DISCLAIMER: The information is based on the data of which we are aware and is believed to be correct as of
the data hereof. Since the information contained herein may be applied under conditions beyond our control and with which we
may be unfamiliar and since data made available subsequent to the date hereof may suggest modification of the information, we
do not assume any responsibility for the result of its use. This information is furnished upon condition that the person receiving it
shall make his own determination of the suitability of the material for his particular purpose.
Page 4 of 4

09MTW132-D_SDS.pdf

Sat, 27 Sep 2025 06:11:10 +0000

09GLY-5_SDS.pdf

Sat, 27 Sep 2025 06:11:09 +0000

Safety Data Sheet

GLYCOL ETHER DPM
Version 1.8 Revision Date: 11/11/2023

SDS Number: 100000003317 1 / 10 GLYCOL ETHER DPM

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Product name : GLYCOL ETHER DPM
Recommended use of the chemical and restrictions on use
Recommended use : Solvent
Manufacturer or supplier’s details
Company : Univar Solutions USA
Address

3075 Highland Pkwy Suite 200
Downers Grove, IL 60515
United States of America (USA)
Emergency telephone number:
Transport North America: CHEMTREC (1-800-424-9300)
CHEMTREC INTERNATIONAL Tel # 703 -527-3887
Additional Information: : Responsible Party: Product Compliance Department
E-mail: SDSNA@univarsolutions.com
SDS Requests: 1-855-429-2661
Website: www.univarsolutions.com
SECTION 2. HAZARDS IDENTIFICATION
GHS Classification
Flammable liquids

: Category 4
Specific target organ toxicity
– single exposure

: Category 3 (Respiratory system)
GHS label elements
Hazard pictograms

Signal word

: Warning

Hazard statements

: H227 Combustible liquid.
H335 May cause respiratory irritation.

Precautionary statements

: Prevention:
P210 Keep away from heat/ sparks/ open flames/ hot surfaces.
No smoking.
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ eye protection/ face protection.
Response:
P304 + P340 + P312 IF INHALED: Remove person to fresh air
and keep comfortable for breathing. Call a POISON CENTER/
doctor if you feel unwell.
P370 + P378 In case of fire: Use dry sand, dry chemical or alco-
hol-resistant foam to extinguish.
Storage:
P403 + P233 Store in a well-ventilated place. Keep container

Safety Data Sheet

GLYCOL ETHER DPM
Version 1.8 Revision Date: 11/11/2023

SDS Number: 100000003317 2 / 10 GLYCOL ETHER DPM

tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
Disposal:
P501 Dispose of contents/ container to an approved waste dis-
posal plant.

Other hazards
None known.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance / Mixture : Substance
Hazardous components
CAS-No. Chemical name Weight percent
34590-94-8 Dipropylene glycol monomethyl ether 90 – 100
Any Concentration shown as a range is due to batch variation.

Synonyms : DIPROPYLENE GLYCOL METHYL ETHER (DPGME) ; 2 -(2-
METHOXYPROPOXY) -1-PROPANOL; DOWANOL DPM ,

SECTION 4. FIRST AID MEASURES
General advice : Do not leave the victim unattended.
If inhaled : If unconscious, place in recovery position and seek medical
advice.
If symptoms persist, call a physician.
In case of skin contact : If on skin, rinse well with water.
If on clothes, remove clothes.
In case of eye contact : Flush eyes with water as a precaution.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed : Keep respiratory tract clear.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
Do not induce vomiting without medical advice.

SECTION 5. FIREFIGHTING MEASURES
Suitable extinguishing media : Carbon dioxide (CO2)
Foam
Dry chemical
Unsuitable extinguishing
media
: High volume water jet
Specific hazards during fire-
fighting
: Do not allow run-off from fire fighting to enter drains or water
courses.

Hazardous combustion prod-: Smoke

Safety Data Sheet

GLYCOL ETHER DPM
Version 1.8 Revision Date: 11/11/2023

SDS Number: 100000003317 3 / 10 GLYCOL ETHER DPM

ucts

toxic fumes
Carbon oxides

Further information : For safety reasons in case of fire, cans should be stored sepa-
rately in closed containments.
Use a water spray to cool fully closed containers.
Special protective equipment
for firefighters
: Wear self-contained breathing apparatus for firefighting if nec-
essary.
Use personal protective equipment.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Environmental precautions

: Prevent further leakage or spillage if safe to do so.

Methods and materials for
containment and cleaning up

: Contain spillage, and then collect with non-combustible ab-
sorbent material, (e.g. sand, earth, diatomaceous earth, ver-
miculite) and place in container for disposal according to local
/ national regulations (see section 13).
Keep in suitable, closed containers for disposal.

SECTION 7. HANDLING AND STORAGE
Advice on protection against
fire and explosion

: Do not spray on a naked flame or any incandescent material.
Keep away from open flames, hot surfaces and sources of
ignition.

Advice on safe handling : Avoid formation of aerosol.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the ap-
plication area.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Conditions for safe storage : No smoking.
Keep in a well-ventilated place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
CAS-No. Components Value type
(Form of
exposure)
Control parame-
ters / Permissible
concentration
Basis
34590-94-8 Dipropylene glycol monomethyl
ether
TWA 100 ppm ACGIH

STEL 150 ppm ACGIH

ST 150 ppm
900 mg/m3
NIOSH REL

TWA 100 ppm
600 mg/m3
NIOSH REL

Safety Data Sheet

GLYCOL ETHER DPM
Version 1.8 Revision Date: 11/11/2023

SDS Number: 100000003317 4 / 10 GLYCOL ETHER DPM

TWA 100 ppm
600 mg/m3
OSHA Z-1

TWA 100 ppm
600 mg/m3
OSHA P0

STEL 150 ppm
900 mg/m3
OSHA P0
Personal protective equipment
Respiratory protection : General and local exhaust ventilation is recommended to
maintain vapor exposures below recommended limits. Where
concentrations are above recommended limits or are un-
known, appropriate respiratory protection should be worn.
Follow OSHA respirator regulations (29 CFR 1910.134) and
use NIOSH/MSHA approved respirators. Protection provided
by air purifying respirators against exposure to any hazardous
chemical is limited. Use a positive pressure air supplied respi-
rator if there is any potential for uncontrolled release, expo-
sure levels are unknown, or any other circumstance where air
purifying respirators may not provide adequate protection.
Hand protection

Remarks : The suitability for a specific workplace should be discussed
with the producers of the protective gloves.
Eye protection : Eye wash bottle with pure water
Tightly fitting safety goggles
Skin and body protection : Impervious clothing
Choose body protection according to the amount and concen-
tration of the dangerous substance at the work place.
Hygiene measures : Wash hands before breaks and at the end of workday.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : liquid
Colour : Clear, colorless
Odour : ether-like, mild
Odour Threshold : No data available
pH : No data available

Freezing Point (Melting
point/freezing point)
: -83 C (-117 F)

Boiling Point (Boiling
point/boiling range)
: 184 – 190 C (363 – 374 F)

Flash point : 75 C (167 F)

Evaporation rate : 0.02
(Butyl Acetate = 1)
Flammability (solid, gas) : No data available
Upper explosion limit

: 14 %(V)

Lower explosion limit

: 1.1 %(V)

Vapour pressure : 0.27 – 0.28 mmHg @ 20 – 25 C (68 – 77 F)

Safety Data Sheet

GLYCOL ETHER DPM
Version 1.8 Revision Date: 11/11/2023

SDS Number: 100000003317 5 / 10 GLYCOL ETHER DPM

10 mmHg @ 75.1 C (167.2 F)

Relative vapour density : 5.1 @ 16 – 32 C (61 – 90 F)
(Air = 1.0)

Relative density : 0.95 – 0.96 @ 20 – 25 C (68 – 77 F)
Reference substance: (water = 1)

Density : 0.95 – 0.96 g/cm3 @ 20 C (68 F)

Solubility(ies)
Water solubility : completely miscible
Solubility in other solvents : No data available
Partition coefficient: n-
octanol/water
: log Pow: < 0.01 @ 25 C (77 F) Auto-ignition temperature : 205 - 207 C Thermal decomposition : No data available Viscosity Viscosity, dynamic : 4 mPa.s @ 25 C (77 F) Viscosity, kinematic : 4.55 mm2/s @ 20 C (68 F) Surface tension : 68.7 mN/m, 20 C SECTION 10. STABILITY AND REACTIVITY Reactivity : No dangerous reaction known under conditions of normal use. Chemical stability : Stable under normal conditions. Possibility of hazardous reac- tions : Vapours may form explosive mixture with air. Conditions to avoid : Keep away from heat, flame, sparks and other ignition sources. Do not allow evaporation to dryness. Exposure to moisture Incompatible materials : Oxygen Strong acids Strong bases Strong oxidizing agents Aluminium Hazardous decomposition products : Aldehydes Ketones Organic acids Sulphur oxides SECTION 11. TOXICOLOGICAL INFORMATION Carcinogenicity IARC No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed Safety Data Sheet GLYCOL ETHER DPM Version 1.8 Revision Date: 11/11/2023 SDS Number: 100000003317 6 / 10 GLYCOL ETHER DPM human carcinogen by IARC. OSHA No component of this product present at levels greater than or equal to 0.1% is on OSHA s list of regulated carcinogens. NTP No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. ACGIH No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcino- gen by ACGIH. STOT - single exposure Product: Assessment: The substance or mixture is classified as specific target organ toxicant, single ex- posure, category 3 with respiratory tract irritation. Further information Product: Remarks: No data available SECTION 12. ECOLOGICAL INFORMATION Ecotoxicity No data available Persistence and degradability No data available Bioaccumulative potential No data available Mobility in soil No data available Other adverse effects Product: Ozone-Depletion Potential : Regulation: 40 CFR Protection of Environment; Part 82 Pro- tection of Stratospheric Ozone - CAA Section 602 Class I Substances Remarks: This product neither contains, nor was manufac- tured with a Class I or Class II ODS as defined by the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B). Additional ecological infor- mation : No data available Safety Data Sheet GLYCOL ETHER DPM Version 1.8 Revision Date: 11/11/2023 SDS Number: 100000003317 7 / 10 GLYCOL ETHER DPM SECTION 13. DISPOSAL CONSIDERATIONS Disposal methods Contaminated packaging : Empty remaining contents. Dispose of as unused product. Do not re-use empty containers. Do not burn, or use a cutting torch on, the empty drum. SECTION 14. TRANSPORT INFORMATION DOT (Department of Transportation): NA1993, Combustible liquid, n.o.s., (PROPANOL, 1(OR 2)-(2-METHOXYMETHYLETHOXY) ), CBL, III IATA (International Air Transport Association): Not regulated as a dangerous good IMDG-Code: Not regulated as a dangerous good Special Notes: : The flash point for this material is greater than 100 F (38 C). Therefore, in accordance with 49 CFR 173.150(f) non-bulk containers (<450L or <119 gallon capacity) of this material may be shipped as non-regulated when transported solely by land, as long as the material is not a hazardous waste, a ma- rine pollutant, or specifically listed as a hazardous substance. SECTION 15. REGULATORY INFORMATION WHMIS Classification : B3: Combustible Liquid EPCRA - Emergency Planning and Community Right-to-Know Act CERCLA Reportable Quantity This material does not contain any components with a CERCLA RQ. SARA 304 Extremely Hazardous Substances Reportable Quantity This material does not contain any components with a section 304 EHS RQ. SARA 311/312 Hazards : Fire Hazard Acute Health Hazard SARA 302 : No chemicals in this material are subject to the reporting re- quirements of SARA Title III, Section 302. SARA 313 : This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. Clean Air Act This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air Act Sec- tion 112 (40 CFR 61). Safety Data Sheet GLYCOL ETHER DPM Version 1.8 Revision Date: 11/11/2023 SDS Number: 100000003317 8 / 10 GLYCOL ETHER DPM This product does not contain any chemicals listed under the U.S. Clean Air Act Section 112(r) for Accidental Release Prevention (40 CFR 68.130, Subpart F). This product does not contain any chemicals listed under the U.S. Clean Air Act Section 111 SOCMI Inter- mediate or Final VOC's (40 CFR 60.489). Clean Water Act This product does not contain any Hazardous Substances listed under the U.S. CleanWater Act, Section 311, Table 116.4A. This product does not contain any Hazardous Chemicals listed under the U.S. CleanWater Act, Section 311, Table 117.3. This product does not contain any toxic pollutants listed under the U.S. Clean Water Act Section 307 US State Regulations Massachusetts Right To Know 34590-94-8 Dipropylene glycol monomethyl ether 90 - 100 % Pennsylvania Right To Know 34590-94-8 Dipropylene glycol monomethyl ether 90 - 100 % New Jersey Right To Know 34590-94-8 Dipropylene glycol monomethyl ether 90 - 100 % California Prop 65 : This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other re- productive harm. The components of this product are reported in the following inventories: TSCA : On TSCA Inventory DSL : All components of this product are on the Canadian DSL AICS : On the inventory, or in compliance with the inventory NZIoC : On the inventory, or in compliance with the inventory ENCS : On the inventory, or in compliance with the inventory KECI : On the inventory, or in compliance with the inventory PHIL : On the inventory, or in compliance with the inventory IECSC : On the inventory, or in compliance with the inventory Safety Data Sheet GLYCOL ETHER DPM Version 1.8 Revision Date: 11/11/2023 SDS Number: 100000003317 9 / 10 GLYCOL ETHER DPM SECTION16. OTHER INFORMATION NFPA: HMIS III: The information accumulated is based on the data of which we are aware and is believed to be correct as of the date hereof. Since this information may be applied under conditions beyond our control and with which we may be unfamiliar and since data made become available subsequently to the date hereof, we do not assume any responsibility for the results of its use. Recipients are advised to confirm in advance of need that the information is current, applicable, and suitable to their circumstances. This SDS has been prepared by Univar Solutions Product Compliance Department (1-855-429-2661) SDSNA@univarsolutions.com. Revision Date : 11/11/2023 Legacy SDS: : R0003866 Material number: 16211717, 16194019, 16184336, 16185957, 16181297, 16174585, 16174584, 16169871, 16146631, 16159926, 16143630, 16149923, 16145915, 16143339, 16143336, 16141455, 16142049, 16143324, 16131149, 16113776, 16056142, 16062112, 16056144, 16056145, 16056143, 16054700, 16009491, 690299, 602895, 554354, 554190, 554164, 554156, 547334, 91843, 104073, 87383, 88000, 505143, 20430, 502818, 546367, 508393, 105453, 54936, 54625, 71314, 106094, 171907, 88306, 73335, 104382, 502596, 505145, 505144, 20432, 20431 Key or legend to abbreviations and acronyms used in the safety data sheet ACGIH American Conference of Govern- ment Industrial Hygienists LD50 Lethal Dose 50% AICS Australia, Inventory of Chemical Substances LOAEL Lowest Observed Adverse Effect Level DSL Canada, Domestic Substances List NFPA National Fire Protection Agency NDSL Canada, Non-Domestic Substanc- es List NIOSH National Institute for Occupational Safety & Health CNS Central Nervous System NTP National Toxicology Program CAS Chemical Abstract Service NZloC New Zealand Inventory of Chemi- cals EC50 Effective Concentration NOAEL No Observable Adverse Effect Flammability Health Instability 2 2 0 FLAMMABILITY PHYSICAL HAZARD HEALTH 2 0 2 Special hazard 0 = not significant, 1 =Slight, 2 = Moderate, 3 = High 4 =Extreme, * = Chronic Safety Data Sheet GLYCOL ETHER DPM Version 1.8 Revision Date: 11/11/2023 SDS Number: 100000003317 10 / 10 GLYCOL ETHER DPM Level EC50 Effective Concentration 50% NOEC No Observed Effect Concentration EGEST EOSCA Generic Exposure Scenar- io Tool OSHA Occupational Safety & Health Administration EOSCA European Oilfield Specialty Chem- icals Association PEL Permissible Exposure Limit EINECS European Inventory of Existing Chemical Substances PICCS Philippines Inventory of Commer- cial Chemical Substances MAK Germany Maximum Concentration Values PRNT Presumed Not Toxic GHS Globally Harmonized System RCRA Resource Conservation Recovery Act >= Greater Than or Equal To STEL Short-term Exposure Limit
IC50 Inhibition Concentration 50% SARA Superfund Amendments and
Reauthorization Act.
IARC International Agency for Research
on Cancer
TLV Threshold Limit Value
IECSC Inventory of Existing Chemical
Substances in China
TWA Time Weighted Average
ENCS Japan, Inventory of Existing and
New Chemical Substances
TSCA Toxic Substance Control Act
KECI Korea, Existing Chemical Inventory UVCB Unknown or Variable Composi-
tion, Complex Reaction Products,
and Biological Materials
<= Less Than or Equal To WHMIS Workplace Hazardous Materials Information System LC50 Lethal Concentration 50%

09GLY-D_SDS.pdf

Sat, 27 Sep 2025 06:11:09 +0000

09DOP-D_SDS.pdf

Sat, 27 Sep 2025 06:11:06 +0000

Univor
Solutions
Safety Data Sheet
Dioctyl phthalate
Version 1.3 Revision Date: 09/01 /201 9
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Product name : Dioctyl phthalate
Recommended use of the chemical and restrictions on use
Recommended use : Manufacture of plasticizers.
Plasticizer in the manufacture of PVC resins.
Manufacturer or supplier’s details
Company : Univar Solutions USA, lnc.
Address 3075 Highland Pkwy Suite 200
Downers Grove, lL 60515
United States of America (USA)
Emergency telephone number:
Transport North America: CHEMTREC (1 -800-424-9300
CH EMTREC I NTERNATI ONAL T el # 7 03-527 -3887
Additional Information: Responsible Party: Product Compliance Department
E-mail: SDSNA@univarsolutions.com
SDS Requests: 1 -855-429-2661
Website: www. univarsolutions.com
SECTION 2. HAZARDS IDENTIFICATION
GHS Classification
Carcinogenicity
Reproductive toxicity
: Category 2
: Category 1B
GHS labelelements
Hazard pictograms
Signalword
Hazard statements
Danger
H351 Suspected of causing cancer.
H360 May damage fertility or the unborn child
Prevention:
P201 Obtain special instructions before use.
P2O2Do not handle until all safety precautions have been read
and understood.
P2B0 Wear protective gloves/ protective clothing/ eye protection/
face protection.
Response:
P308 + P313 lF exposed or concerned: Get medicaladvice/
attention.
Storage:
P405 Store locked up.
Precautionary statements

‘ Univor
Solutions
Safety Data Sheet
Dioctyl phthalate
Version 1.3 Revision Date: 09/01/201 9
Disposal:
P501 Dispose of contents/ container to an approved waste dis-
posal plant.
Other hazards
None known.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/Mixture : Substance
Hazardous components
CAS-No. Chemicalname Weight percent
117-81-7 Dioctvl phthalate 90 – 100
Any Concentration shown as a range is due to batch variation.
Synonyms : bis(2-ethylhexyl),1,2-benzenedicarboxylic acid,
SECTTON 4. FIRST AID MEASURES
General advice :
lf inhaled
ln case of skin contact
ln case of eye contact
lf swallowed
Notes to physician
Move out of dangerous area.
Show this safety data sheet to the doctor in attendance’
Do not leave the victim unattended.
lf unconscious, place in recovery position and seek medical
advice.
lf symptoms persist, call a physician.
lf skin irritation persists, call a physician.
lf on skin, rinse well with water.
lf on clothes, remove clothes.
lmmediately flush eye(s) with plenty of water
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
lf eye irritation persists, consult a specialist.
Clean mouth with water and drink afterwards plenty of water
Do not induce vomiting without medical advice.
Keep respiratory tract clear.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
lf symptoms persist, call a physician.
Take victim immediately to hospital.
Treat symptomatically
SECTION 5. FIREFIGHTING MEASURES

Univor
Solutions
Safety Data Sheet
Dioctyl phthalate
Version 1.3 Revision Date: 09/01/201 9
Suitable extinguishing media
Unsuitable extinguishing
media
Specific hazards during fire-
fighting
Hazardous combustion prod-
ucts
Specific extinguishing meth-
ods
Further information
Special protective equipment
for firefighters
Water spray
Dry chemical
Carbon dioxide (CO2)
Foam
: High volume water jet
Do not allow run-off from fire fighting to enter drains or water
courses.
Carbon oxides
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Wear self-contained breathing apparatus for firefighting if nec-
essary.
Use personal protective equipment.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec- : Use personal protective equipment
tive equipment and emer-
gency procedures
Environmental precautions
Methods and materials for
containment and cleaning up
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
lf the product contaminates rivers and lakes or drains inform
respective authorities.
Soak up with inert absorbent material (e.9. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on protection against : Normal measures for preventive fire protection.
fire and explosion
Advice on safe handling : Do not breathe vapours/dust.
Avoid exposure – obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section B.
Smoking, eating and drinking should be prohibited in the ap-
plication area.
Dispose of rinse water in accordance with local and national
regulations.

‘
Univor
”
Solutions
Safety Data Sheet
Dioctyl phthalate
Version 1.3 Revision Date: 09/01/201 9
Conditions for safe storage Keep container tightly closed in a dry and well-ventilated
place.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Gomponents with workplace control parameters
Personal protective equipment
Respiratory protection
Hand protection
Remarks
No personal respiratory protective equipment normally re-
quired.
ln the case of vapour formation use a respirator with an ap-
proved filter.
The suitability for a specific workplace should be discussed
with the producers of the protective gloves.
Eye wash bottle with pure water
Tightly fitting safety goggles
lmpervious clothing
Choose body protection according to the amount and concen-
tration of the dangerous substance at the work place.
When using do not eat or drink.
When using do not smoke.
Wash hands before breaks and at the end of workday
Eye protection
Skin and body protection
Hygiene measures
CAS-No Components Value type
(Form of
exposure)
Controlparame-
ters / Permissible
concentration
Basis
117-81-7 Dioctvl phthalate TWA 5 mq/m3 ACGIH
TWA 5 mo/m3 NIOSH REL
ST 10 mq/m3 NIOSH REL
TWA 5 mq/m3 OSHA Z-1
TWA 5 mq/m3 OSHA PO
STEL 10 mq/m3 OSHA PO
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : liquid
Colour : colourless

Univor
Solutions
Safety Data Sheet
Dioctyl phthalate
Version 1.3 Revision Date: 09/01/201 9
Odour
Odour Threshold
pH
Freezing Point (Freezing
Point)
Boiling Point (Boiling
poinUboiling range)
Flash point
Evaporation rate
Flammability (solid, gas)
Upper explosion limit
Lower explosion limit
Vapour pressure
Relative vapour density
Relative density
Density
Solubility(ies)
Water solubility
Solubility in other solvents
Partition coefficient: n-
octanol/water
Auto-ignition tem perature
Thermal decomposition
Viscosity
Viscosity, dynamic
Viscosity, kinematic
slight, mild
No data available
No data available
-50 “c (-58 “F)
: 384 “C (723’F)
201 “C (394 ‘F)
Method: closed cup
not determined
No data available
No data available
No data available
> 1.2 mmHg @20″C (68’F)
13.5 @ 20 – 25’C (68 – 77 “F)
(Air = 1.0)
0.985 @ 20’C (68’F)
Reference substance: (water = 1)
0.9622 g/cm3
@20
– 25’C (68 -77 “F)
0.1 – 0.285 g/l soluble
No data available
Pow: 75,858
log Pow: 4.88 – 7.6
370 – 382’C
> 393’C
56.6 mPa.s @ 25’C (77 ‘F)
57.46 mm2ls @25″C
(77 “F)
SECTION 10. STABILITY AND REACTIVITY

.
”
,’ Univor
: (- I ,’
Safety Data Sheet
Dioctyl phthalate
Version 1.3 Revision Date: 09/01 /201 9
Reactivity
Chemical stability
Possibility of hazardous reac-
tions
Conditions to avoid
lncompatible materials
Hazardous decom position
products
Stable under recommended storage conditions.
Stable under normal conditions.
No hazards to be specially mentioned.
Keep away from heat, flame, sparks and other ignition
sources.
Strong oxidizing agents
carbon dioxide and carbon monoxide
SECTION 11. TOXICOLOGICAL INFORMATION
Carcinogenicity
Product:
Carcinogenicity – Assess-
ment
IARC
OSHA
NTP
Reproductive toxicity
Gomponents:
117-81-7l.
Effects on fertility
: Suspected human carcinogens
Group 2B: Possibly carcinogenic to humans
117-81-7 Dioctyl phthalate
No component of this product present at levels greater than or
equal to 0.1% is on OSHA’s list of regulated carcinogens.
Reasonably anticipated to be a human carcinogen
117-81-7 Dioctyl phthalate
Test Type: multigeneration study
Species: Rat, male and female
Application Route: Oral
Dose: 1.5 – 10,000 ppm
General Toxicity – Parent: NOAEL: 300 ppm
General Toxicity F1: NOAEL: 300 ppm
Fertility: NOAEL: 1,000 ppm
Early Embryonic Development: NOAEL: 100 ppm
Sym ptoms: Reduced fertility Testicular effects
Result: Embryotoxic effects and adverse effects on the off-
spring were detected.
Effects on foetal develop- Species: Rat

Univor
Sclutions
Safety Data Sheet
Dioctyl phthalate
Version 1.3 Revision Date: 09/01/201 9
ment
Reproductive toxicity – As-
sessment
Teratogenicity – Assessment
Further information
Product:
Remarks: No data available
Application Route: Oral
Dose: 0, 357,666, 586, 1055 mg/kg
Duration of Single Treatment: 21 d
General Toxicity Maternal: NOAEL: 357 mg/kg body weight
Teratogenicity: NOAEL: >= 1,055 mg/kg bodyweight
DevelopmentalToxicity: NOAEL: 357 mg/kg body weight
Symptoms: Maternal toxicity, Reduced number of viable fe-
tuses, Preimplantation loss
Result: Embryotoxic effects and adverse effects on the off-
spring were detected.
Clear evidence of adverse effects on sexual function and fertil-
ity, based on animalexperiments.
Clear evidence of adverse effects on development, based on
animal experiments.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
Product:
Ozone-Depletion Potential
Additional ecological infor-
mation
Regulation: 40 CFR Protection of Environment; Part 82 Pro-
tection of Stratospheric Ozone – CAA Section 602 Class I
Substances
Remarks: This product neither contains, nor was manufac-
tured with a Class I or Class ll ODS as defined by the U.S.
Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B)
An environmental hazard cannot be excluded in the event of
unprofessional handling or disposal.

Univor
Solutions
Safety Data Sheet
Dioctyl phthalate
Version 1.3 Revision Date: 09/01/201 9
Very toxic to aquatic life with long lasting effects.
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues
Contaminated packaging
Dispose of in accordance with all applicable local, state and
federal regulations.
For assistance with your waste management needs – including
disposal, recycling and waste stream reduction, contact Uni-
var Solutions ChemCare: 1 -800-909-4897
Empty remaining contents.
Dispose of as unused product.
Do not re-use empty containers.
SECTION 14. TRANSPORT INFORMATION
DOT (Department of Transportation) :
UN3082, Environmentally hazardous substances, liquid, n.o.s., (BlS(2-ETHYLHEXYL) PHTHALATE), 9, lll
IATA (lnternational Air Transport Association): Not regulated as a dangerous good
IMDG-Code: Not regulated as a dangerous good
Special Notes: This material is shipped as a Class 9, Packing Group lll when
each package meets or exceeds the reportable quantity, oth-
enrise it may be shipped as not regulated.
SECTION 1 5. REGULATORY INFORMATION
WHMIS Classification : D2A: Very Toxic Material Causing Other Toxic Effects
EPCRA – Emergency Planning and Community Right-to-Know Act
CERCLA Reportable Quantity
SARA 304 Extremely Hazardous Substances Reportable Quantity
This material does not contain any components with a section 304 EHS RQ.
SARA 3′,’11312 Hazards : Carcinogenicity
Reproductive toxicity
Components CAS-No Component RQ
(lbs)
Calculated product RQ
(lbs)
Dioctvl ohthalate 117-81-7 100 100

. ‘ :
Univor
Safety Data Sheet
Dioctyl phthalate
Version 1.3 Revision Date: 09/01 /201 9
SARA 302 No chemicals in this material are subject to the reporting re-
quirements of SARA Title lll, Section 302.
SARA 313 : The following components are subject to reporting levels es-
tablished by SARA Title lll, Section 313:
117-81-7 Dioctyl phthalate
Clean Air Act
The following chemical(s) are listed as HAP under the U.S. Clean Air Act, Section 12 (40 CFR 61):
117-81-7 Dioctyl phthalate
This product does not contain any chemicals listed under the U.S. Clean Air Act Section 112(r) for Accidental
Release Prevention (40 CFR 68.130, Subpart F).
This product does not contain any chemicals listed under the U.S. Clean Air Act Section 111 SOCMI lnter-
mediate or FinalVOC’s (40 CFR 60.489).
Clean Water Act
This product does not contain any Hazardous Substances listed under the U.S. CleanWater Act, Section
31 1, Table 1 16.4A.
This product does not contain any Hazardous Chemicals listed under the U.S, CleanWater Act, Section 311,
Table 1 17.3.
This product does not contain any toxic pollutants listed under the U.S. Clean Water Act Section 307
Massachusetts Right To Know
117-81-7 Dioctyl phthalate
Pennsylvania Right To Know
117-81-7 Dioctyl phthalate
California Prop 65
A WenrulruG: This product can expose you to chemicals including Dioctyl phthalate, which
is/are known to the State of California to cause cancer and birth defects or other reproductive
harm. For more information go to www.P65Warnings.ca.gov.
The components of this product are reported in the following inventories:
TSCA : On TSCA lnventory
DSL : All components of this product are on the Canadian DSL
AICS : On the inventory, or in compliance with the inventory
NZIoC : On the inventory, or in compliance with the inventory
ENCS : On the inventory, or in compliance with the inventory
KECI : On the inventory, or in compliance with the inventory
PICCS : On the inventory, or in compliance with the inventory
IECSC : On the inventory, or in compliance with the inventory

.’ , Univqr
. r- I ..
)oluttons
Safety Data Sheet
Dioctyl phthalate
Version 1.3 Revision Date: 09/01 /201 9
SECTIONl 6. OTHER INFORMATION
NFPA:
Flammability
Legacy SDS:
HMIS III
Special hazard
0 = not significant, 1 =Slight,
2=Moderate,3=High
4=Extreme,*=Chronic
The information accumulated is based on the data of which we are aware and is believed
to be correct as of the date hereof. Since this information may be applied under conditions
beyond our control and with which we may be unfamiliar and since data made become
available subsequently to the date hereof, we do not assume any responsibility for the
results of its use. Recipients are advised to confirm in advance of need that the information
is current, applicable, and suitable to their circumstances. This SDS has been prepared by
U n iva r Sol utions Prod uct Co m plia nce De pa rtm ent (1 -855-429-266 1
)
SDSNA@univarsolutions. com.
Revision Date
E
=(u
0)
I
5
a
0)
q
=
=
0910112019
R0000784
Material number:
16114352,16041615,16040040,16010403,641124,554178,127695,104226,16062074,
16020449,546066,546065,546064,87234,69100,95497,71469,103619,52729,53999,
87 235, 527 1 9, 53996, BB2B 1, 53993, 1 04227, 201 80, 2017 9, 2017 8, 20177
PHYSICAL HAZARD
HEALTH
FLAMMABILITY
Key or legend to abbreviations and acronyms used in the safety data sheet
ACGIH American Conference of Govern-
ment lndustrial Hyqienists
LD50 Lethal Dose 50%
AICS Australia, lnventory of Chemical
Substances
LOAEL Lowest Observed Adverse Effect
Level
DSL Canada, Domestic Substances ListNFPA National Fire Protection Aqencv
NDSL Canada, Non-Domestic Substanc-
es List
NIOSH National lnstitute for Occupational
Safety & Health
CNS Central Nervous System NTP National Toxicoloqv Prooram
CAS Chemical Abstract Service NZIoC New Zealand lnventory of Chemi-
cals
EC50 Effective Concentration NOAEL No Observable Adverse Effect
Level
EC50 Effective Concentration 50% NOEC No Observed Effect Concentration

Univor
Solutions
Safety Data Sheet
Dioctyl phthalate
Version 1.3 Revision Date: 09/01/201 9
EGEST EOSCA Generic Exposure Scenar-
io Tool
OSHA Occupational Safety & Health
Administration
EOSCA European Oilfield Specialty Chem-
icals Association
PEL Permissible Exposure Limit
EINECS European lnventory of Existing
Chemical Substances
PICCS Philippines lnventory of Commer-
cial Chemical Substances
MAK Germany Maximum Concentration
Values
PRNT Presumed Not Toxic
GHS Globally Harmonized System RCRA Resource Conservation Recovery
Act
>= Greater Than or Equal To STEL Shortterm Exposure Limit
lc50 lnhibition Concentration 50% SARA Superfund Amendments and
Reauthorization Act.
IARC lnternational Agency for Research
on Cancer
TLV Threshold Limit Value
IECSC lnventory of Existing Chemical
Substances in China
TWA Time Weighted Average
ENCS Japan, lnventory of Existing and
New Chemical Substances
TSCA Toxic Substance Control Act
KECI Korea, Existing Chemical lnventoryUVCB Unknown or Variable Composi-
tion, Complex Reaction Products,
and Bioloqical Materials
<= Less Than or Equal To WHMIS Workplace Hazardous Materials lnformation System LC50 Lethal Concentration 50%

09DOP-5_SDS.pdf

Sat, 27 Sep 2025 06:11:05 +0000

09DBP-G_SDS.pdf

Sat, 27 Sep 2025 06:11:04 +0000

MATERIAL SAFETY DATA SHEET
Revision Date: 11/20/2009
MSDSUSA/ANSI/EN/150000001048 /Version 5.1

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Name Eastman(TM) DBP Plasticizer
Product Identification Number(s) 00081-00, P0008100, P0008101, P0008102, P0008103,
P0008104, P0008105, P0008107
Manufacturer/Supplier Eastman Chemical Company
200 South Wilcox Drive
Kingsport, TN 37660-5280
US
+14232292000
MSDS Prepared by Eastman Product Safety and Health
Chemical Name 1,2-benzenedicarboxylic, dibutyl ester
Synonym(s) 00081-00 901403
Molecular Formula C16H22O4
Molecular Weight 278.35
Product Use plasticizer
OSHA Status hazardous

For emergency health, safety, and environmental information, call 1-423-229-4511 or 1-423-229-2000.

For emergency transportation information, in the United States: call CHEMTREC at 800-424-9300 or call
423-229-2000.

2. COMPOSITION INFORMATION ON INGREDIENTS
(Typical composition is given, and it may vary. A certificate of analysis can be provided, if available.)
Weight % Component CAS Registry No.
100% dibutyl phthalate 84-74-2

3. HAZARDS IDENTIFICATION

CAUTION!
MAY CAUSE ADVERSE RE PRODUCTIVE EFFECTS – SUCH AS BIRTH DEFECTS, MISCARRIAGES,
OR INFERTILITY BASED ON ANIMAL DATA

HMIS Hazard Ratings: Health – 1*, Flammability – 1, Chemical Reactivity – 0

HMIS rating involves data interpretations that may vary from company to company. They are intended only for rapid,
general identification of the magnitude of the specific hazard. To deal adequately with the safe handling of this material,
all the information contained in this MSDS must be considered.

MATERIAL SAFETY DATA SHEET
Revision Date: 11/20/2009
MSDSUSA/ANSI/EN/150000001048 /Version 5.1

4. FIRST-AID MEASURES

Inhalation: If symptomatic, move to fresh air. Get medical attention if symptoms persist.
Eyes: Any material that contacts the eye should be washed out immediately with water. If easy to do,
remove contact lenses. Get medical attention if symptoms persist.
Skin: Wash with soap and water. Get medical attention if symptoms occur.
Ingestion: Seek medical advice.

5. FIRE FIGHTING MEASURES

Extinguishing Media: water spray, dry chemical, carbon dioxide, foam
Special Fire-Fighting Procedures: Wear self-contained breathing apparatus and protective clothing.
Hazardous Combustion Products: carbon dioxide, carbon monoxide
Unusual Fire and Explosion Hazards: none

6. ACCIDENTAL RELEASE MEASURES

Absorb spill with vermiculite or other inert material, then place in a container for chemical waste.
For Large Spills: Flush spill area with water spray. Prevent runoff from entering drains, sewers, or
streams. Dike for later disposal.

7. HANDLING AND STORAGE

Personal Precautionary Measures: Wash thoroughly after handling.
Prevention of Fire and Explosion: Keep from contact with oxidizing materials.
Storage: Keep container closed.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Country specific exposure limits have not been established or are not applicable unless listed below.

DIBUTYL PHTHALATE
US. ACGIH Threshold Limit Values
Time Weighted Average (TWA): 5 mg/m3
US. NIOSH: Pocket Guide to Chemical Hazards
Recommended exposure limit (REL): 5 mg/m3
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
PEL: 5 mg/m3
US. NIOSH: Pocket Guide to Chemical Hazards
Listed.
US. California Code of Regulations, Title 8, Section 5155. Airborne Contaminants

MATERIAL SAFETY DATA SHEET
Revision Date: 11/20/2009
MSDSUSA/ANSI/EN/150000001048 /Version 5.1

Time Weighted Average (TWA) Permissible Exposure Limit (PEL): 5 mg/m3

Ventilation: Good general ventilation (typically 10 air changes per hour) should be used. Ventilation
rates should be matched to conditions. If applicable, use process enclosures, local exhaust
ventilation, or other engineering controls to maintain airborne levels below recommended
exposure limits. If exposure limits have not been established, maintain airborne levels to an
acceptable level.
Respiratory Protection: If engineering controls do not maintain airborne concentrations below
recommended exposure limits (where applicable) or to an acceptable level (in countries where
exposure limits have not been established), an approved respirator must be worn. In the United
States of America, if respirators are used, a program should be instituted to assure compliance
with OSHA Standard 63 FR 1152, January 8, 1998. Respirator type: Air-purifying respirator with
an appropriate, government approved (where applicable), air-purifying filter, cartridge or
canister. Contact health and safety professional or manufacturer for specific information.
Eye Protection: It is a good industrial hygiene practice to minimize eye contact.
Skin Protection: It is a good industrial hygiene practice to minimize skin contact.
Recommended Decontamination Facilities: eye bath, washing facilities

9. PHYSICAL AND CHEMICAL PROPERTIES
Physical Form: liquid
Color: colorless
Odor: odorless
Specific Gravity: 1.048 (20 C)
Vapor Pressure: 20 C; 0.0000189 mbar
Vapor Density: 9.6
Freezing Point: -35 C
Boiling Point: 340 C
Viscosity: 15 mPa.s (25 C) ,
Solubility in Water: 11.2 mg/l
Octanol/Water Partition Coefficient: P: 61,660; log P: 4.79
Flash Point: 191 C (Cleveland open cup)
Autoignition Temperature: 404 C (ASTM D2155)
Thermal Decomposition Temperature: (DTA) No exotherm to boiling

10. STABILITY AND REACTIVITY

Stability: Stable; however, material can decompose at elevated
temperatures.
Incompatibility: Material reacts with strong oxidizing agents.
Hazardous Polymerization: Will not occur.

11. TOXICOLOGICAL INFORMATION

MATERIAL SAFETY DATA SHEET
Revision Date: 11/20/2009
MSDSUSA/ANSI/EN/150000001048 /Version 5.1

General: High oral doses of this material given to pregnant animals produced some minor
abnormalities in their offspring. However, high doses to humans handling this material are not
expected since oral consumption is not a likely route of significant exposure. Because this
material does not evaporate readily and is not easily absorbed through human skin, it is not
expected to produce such effects in humans through inhalation or skin exposure when handled
in a manner consistent with the precautionary measures contained in this Safety Data Sheet.
Acute toxicity data, if available, are listed below. Additional toxicity data may be available on request.

Oral LD-50:(rat) 20,000 – 25,000 mg/kg
Dermal LD-50: ( guinea pig) > 2,096 mg/kg> 2 ml/kg (highest dose tested)
Dermal LD-50: ( rabbit) > 20,960 mg/kg> 20 ml/kg (highest dose tested)
Skin Irritation (guinea pig) slight
Skin Irritation (rabbit) none
Eye Irritation (human) slight

12. ECOLOGICAL INFORMATION

Acute toxicity data, if available, are listed below. Additional toxicity data may be available on request.
Oxygen Demand Data:
BOD-5: 340 mg/g
BOD-5: 430 mg/g

COD (Chemical Oxygen Demand):: 1,710 mg/g
ThBOD: 2,240 mg/g

Acute Aquatic Effects Data:
96 h LC-50 (fathead minnow): 0.92 mg/l NOEC: 0.32 mg/l
96 h LC-50 (rainbow trout): 1.6 mg/l NOEC: 0.5 mg/l
96 h LC-50 (sheepshead minnow): > 0.6 mg/l NOEC: 0.6 mg/l
96 h LC-50 (bluegill sunfish): 0.48 mg/l NOEC: 0.42 mg/l
48 h EC-50 (daphnid): 3.0 mg/l NOEC: 1.7 mg/l

13. DISPOSAL CONSIDERATIONS

Discharge, treatment, or disposal may be subject to national, state, or local laws. Incinerate.

14. TRANSPORT INFORMATION

MATERIAL SAFETY DATA SHEET
Revision Date: 11/20/2009
MSDSUSA/ANSI/EN/150000001048 /Version 5.1

Important Note: Shipping descriptions may vary based on mode of transport, quantities, package size, and/or
origin and destination. Consult your company’s Hazardous Materials/Dangerous Goods expert for information
specific to your situation.

DOT (USA)

Class 9, Packing Group III when material is shipped in quantities in one package at or above the Reportable
Quantity and when no other hazard class applies; otherwise, not regulated.

Reportable Quantity: 4.5 kg (dibutyl phthalate)

Marine pollutant.: dibutyl phthalate

Possible Shipping Description(s):

not regulated

UN 3082 Environmentally hazardous substances, liquid, n.o.s. (dibutyl phthalate) 9 III

Sea – IMDG (International Maritime Dangerous Goods)

Marine pollutant.: (dibutyl phthalate)

Possible Shipping Description(s):

UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (dibutyl phthalate) 9
III

Air – ICAO (International Civil Aviation Organization)

Class not regulated

Possible Shipping Description(s):

not regulated

15. REGULATORY INFORMATION

MATERIAL SAFETY DATA SHEET
Revision Date: 11/20/2009
MSDSUSA/ANSI/EN/150000001048 /Version 5.1

This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all the information required by the Controlled Products
Regulations.
WHMIS (Canada) Status: controlled

WHMIS (Canada) Hazard Classification: D/2/B

SARA 311-312 Hazard Classification(s):
delayed (chronic) health hazard

SARA 313: none, unless listed below
DIBUTYL PHTHALATE

Carcinogenicity Classification (components present at 0.1% or more): none, unless listed below

TSCA (US Toxic Substances Control Act): This product is listed on the TSCA inventory. Any impurities
present in this product are exempt from listing.
DSL (Canadian Domestic Substances List) and CEPA (Canadian Environmental Protection Act):
This product is listed on the DSL. Any impurities present in this product are exempt from listing.
EINECS (European Inventory of Existing Commercial Chemical Substances): This product is listed
on EINECS or otherwise complies with EINECS requirements. EINECS Number: 201-557-4
AICS / NICNAS (Australian Inventory of Chemical Substances and National Industrial Chemicals
Notification and Assessment Scheme): This product is listed on AICS or otherwise complies with
NICNAS.
MITI (Japanese Handbook of Existing and New Chemical Substances): This product is listed in the
Handbook or has been approved in Japan by new substance notification.
ECL (Korean Toxic Substances Control Act): This product is listed on the Korean inventory or
otherwise complies with the Korean Toxic Substances Control Act.02214

16. OTHER INFORMATION

Visit our website at www.EASTMAN.com or email emnmsds@eastman.com

The information contained herein is based on current knowledge and experience; no responsibility is
accepted that the information is sufficient or correct in all cases. Users should consider these data only as
a supplement to other information. Users should make independent determinations of suitability and
completeness of information from all sources to assure proper use and disposal of these materials, the
safety and health of employees and customers, and the protection of the environment.

Highlighted areas indicate new or changed information.