by | Sep 27, 2025
INTRODUCTION
Woven Roving is made of direct roving in plain or twill weave pattern. The input roving varies according to different
basic weight. It’s a good performance fabric compatible with polyester, vinylester, epoxy resin and phenolic rsins.
FEATURES
high porosity, excellent dimensional stability, high impact response,
high mechanical strength, high wet strength retention
rapid wet-out, excellent laminate properties, design flexibility,
APPLICATIONS
Often applied in hand lay-up and robot control process for various industries:
vessels, boats, containers, aircraft, automotive parts, home furnishings,
sports equipment, tanks, panels, and other parts
PRODUCT LIST & SPECIFICATION
# Item –
g/sqm
Item –
oz/sqyd
Basic
Weight
input
roving –
waft
waft density
end/10cm
input roving –
weft
weft density
ends/10cm
moisture
content
L.O.I contentWidth
1 WR200 6 200 200tex 46 300tex 36 /=440>/=63,960
Flexural ModulusISO 3597: 1997 20,4002,958,000
Tensile StrengthISO 527 – 4: 1997 286 41,480
Tensile ModulusISO 527 – 4: 199718,8002,726,000
Glass ContentISO 1172 : 1996
PACKAGE:
Shrinked with plastic film. 1 roll per carton, 20 ctns or 25 ctns per pallet
STORAGE:
Keep away from heat and moisture. Recommend temperature 15 – 35 oC, humidity: 35% – 85%,
Woven Roving S101
Property Testing Method
59
by | Sep 27, 2025
by | Sep 27, 2025
(F)
SILBRICO
ccltrtFotrtATl0lu
$i1-Ce11 Technical I)’et’e”
TYPICAL PHYSICAL PROPERTIES OF SIL-CBLL 2/)tt/L/B
{Lf/8
CHEMICAL ANALYSIS
Aluminum Oxide…….. ……..11%
Potassium Oxide…….. ………5%
Sodium Oxide. 3%
Calcium Oxide…….. …………1%
Plus Trace Elements
GRADES sil-32sil-42
Oil Absorption ASTM-D-1483 gms. oil per 100 cc 30
Hygroscopic Moisture 0 0
Surface pH 7.0
Thermal Conductivity 0.40
Color White
Dry Bulk Density, lb/cu. ft. i
8.s
i4sAverage Particle Size, Microns
Effective Particle density, lb./cu. ft. (g/cm3) l l .2(0.18)ts.6(0.2s)
Particle Size Range, Microns 1-300
2300
1-210
Fusion Point ( F) 2300
.S. Sieve)
oh
Wt. sit-35 sil-43
+ 50 Mesh 2 TRACE 0
– 50 +100 5 TRACE TRACE
-100 +200 25 l2
88–200 s0 70
SIL-CELL is used in rotation molding; cultured marble; thermo-set castings; syntactic foam; SMC and BMC
compounds; auto body putty; sealants and adhesives; patching compounds; FRP spray and hand lay up; tub and
shower enclosures; and, explosives.
SIL-CELL is available with a variety of proprietary coatings to enhance its performance.
MIXING PROCEDURE
The use of a low shear, folding type mixer is desirable to minimize particle breakage. When mixing
SIL-CELL, it is important that it is thoroughly mixed and “wet out.”
Technical data shown is considered accurate and reliable. However, there is no guarantee ofresults, and noformulation gives
permission to violate any patent.
sil-43sil-35
4038
0 0
7.0 7.0
0.41 0.43
White White
9.0 10.5
40 35
15.6(0.25)18.7(0.30)
1-150 1-150
2300 2300
sil-32
15
33
0
5
95
HEROSIL’/9,
7+FittlqoAEROSIL’200
;’iz; :i ;’ r: i:t: :.liie ; ? *r**., :;iii t:;t
o/o
g/l
%
approx. 50
> 99.8
pH value
in 4olo dispersion
Loss on drying*
2 hours at 1 05 “C
Tamped density*
Si02 content
based on ignited material
*
ex plant
The data represents typical values (no product specification)
Registrations (substance or product
components)
AEROStL” 200
CAS-No
REACH (Europe)
TSCA (usA)
DSL (Canada)
AICS (Australia)
ENCs (Japan)
lEcsc (china)
KECI (Korea)
Characteristic physico-chemical data
Properties and test methods Unit Value
Specific surface area (BET)
^’/g
175 – 225
AEROSIL’200 is a hydrophilic fumed silica with a sPecific
surface area of 2OO m2 /
g.
Applications and properties
Applications
. Paints and coatings
r Unsaturated polyester resins, laminating resins and gel
coats
r HTV- and RTV-2K-silicone rubber
r Adhesives and sealants
r Printing inks
r Cable compounds and cable gels
r Plant protection
Properties
o Rheology and thixotropy control of liquid systems,
binders, polymers, etc.
o Used as anti-settling, thickening and anti-sagging agent
o Reinforcement of HTV- and RTV-2K silicone rubber
o lmprovement of free flow and anticaking characteristics
of powders
Safety and handling
lnformation concerning the safety of this product is listed in the
corresponding Safety Data Sheet, which will be sent with the
first delivery or upon updating. Such information is also
available from Evonik Operations, Product Safety Department,
E-MAIL sds-im@evonik.com We recommend to read carefully
the safety data sheet prior to the use of our product.
Packaging and storage
AEROSIL’ 200 is supplied in multiple layer 10 kg bags. We
recommend to store the product in closed containers under dry
conditions and to protect the material from volatile substances.
AEROSIL” 200 should be used within 2 years after production.
3.7 – 4.5
< 1.5
registered
112 94s-s2-5
7631-86-9
registered
registered
registered
registered
registered
registered
by | Sep 27, 2025
SC-125 Page 1 of 2 Date: 12/14/2021
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
PIGMENT, RELEASE & MISCELLANEOUS PRODUCT
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
SC-125
ALUMINUM GRANULES
TEARDROP SHAPE
SC-125 Aluminum Granules are typically used in epoxy casting resin systems to reduce shrinkage and enhance heat conductivity.
Generally, the most frequent use is with TC-1650 A/B and TC-1651 A/B hi-temperature aluminum powder filled epoxy casting system.
Note: Be sure to pre-mix resin and hardener prior to adding SC-125 Aluminum Granules. SC-125 also provides a cost reduction when
displacing resins in various casting applications.
Uniform sized aluminum granule Teardrop shape
Free of metallic dust Free of any other contaminants
Does not oxidize No moisture
Excellent product distribution and blending properties Density-average: 19 cu. in. per lb.
APPLICATION:
SC-125 will allow a wide latitude of loading for different types of usage. Generally, the most frequent use is for casting an epoxy tooling
backup, and the typical loading is 100 parts epoxy with 100 parts SC-125. Various tool configurations may require less SC-125 as the
100 to 100 mix may not flow well enough without use of vibration. Compression values at this loading level have been found to be close
to the same compression value of the epoxy used.
PACKAGING
Available in 25 lb. boxes and 50 lb. bags.
Refer to the Material Safety Data Sheet before using this product.
An ISO-9001 Certified company
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
Product Information
Product Description
Ti-Pure
R-900 is a rutile titanium dioxide pigment
manufactured by the chloride process for general interior
coatings applications. It is a fine dry powder with the
following general properties.
Table 1.
Analysis and Physical Properties of Ti-Pure
R-900
Property R-900
TiO
2, wt%, min. 94
Alumina, wt% 4.3
Amorphous Silica, wt%
Specific Gravity 4.0
Bulking Value, L/kg (gal/lb) 0.25 (0.03)
Organic Treatment No
Color CIE L* 99.8
Median Particle Size, m 0.41
Oil Absorption 15.2
pH 8.1
Resistance at 30 C (86 F) (1,000 ohm) 12
Carbon Black Undertone 12.4
Note: All values are typical unless otherwise specified.
Suggestions for Use Ti-Pure
R-900 is a general-purpose interior pigment
combining good gloss, high hiding power, and excellent
dispersion. Recommended use is in:
interior architectural coatings
interior industrial coatings
powder coatings
coil coatings
container coatings
electrodeposition applications
For safety information, please visit the product Safety
Data Sheet (SDS).
Shipping Containers
Ti-Pure
R-900 is available in 50-lb (25-kg) paper bags
and semibulk containers (1/2 and 1 metric ton). Truckload
shipments of the dry product are available directly from
Chemours. Less-than-truckload volumes are available
through one of the authorized Ti-Pure distributors.
Product Storage
The shelf life of Ti-Pure
TiO
2 is indefinite as long as the
material is kept from direct contact with moisture.
For further information about this grade or to request a
sample, please see the Ti-Pure web site.
www.titanium.chemours.com
R-900 Titanium Dioxide
Ti-Pure
R-900 Titanium Dioxide
2015 The Chemours Company TT, LLC. Ti-Pure
and any associated logos are trademarks or copyrights of The Chemours Company TT, LLC.
Chemours
and the Chemours Logo are trademarks of The Chemours Company.
Replaces: H-65962-6
C-10471 (9/15)
CAUTION: Do not use Chemours materials in medical applications involving permanent implantation in the human body or contact with bodily fluids or tissues, unless the material has been provided
from Chemours under a written contract that is consistent with Chemours policy regarding medical applications and expressly acknowledges the contemplated use. For further information, please
contact your Chemours representative. You may also visit www.teflon.com/industrial to download a copy of the Chemours POLICY Regarding Medical Applications C-00000 and Chemours CAUTION
Regarding Medical Applications C-00000. For medical emergencies, spills, or other critical situations, call (800) 441-7515 within the United States. For those outside of the United States, call
(302) 774-1000.
The information set forth herein is furnished free of charge and based on technical data that Chemours believes to be reliable. It is intended for use by persons having technical skill, at their own
discretion and risk. The handling precaution information contained herein is given with the understanding that those using it will satisfy themselves that their particular conditions of use present
no health or safety hazards. Because conditions of product use are outside our control, Chemours makes no warranties, express or implied, and assumes no liability in connection with any use
of this information. As with any material, evaluation of any compound under end-use conditions prior to specification is essential. Nothing herein is to be taken as a license to operate under or a
recommendation to infringe any patents.
NO PART OF THIS MATERIAL MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS ELECTRONIC, MECHANICAL, PHOTOCOPYING, RECORDING OR OTHERWISE
WITHOUT THE PRIOR WRITTEN PERMISSION OF CHEMOURS.
For more information, visit www.titanium.chemours.com
by | Sep 27, 2025
HJSIL
HJSIL
200
Hydrophilicfumedsilica
Characteristics Applications
HJSIL
200isakindofhydrophilicfumedsilica
withaspecificsurfaceareaof200m
2
/g.It s
highpuritywhitecolloidalpowder.
HTVandRTVsiliconerubber
Adhesivesandsealants
Paints,coatingsandpigments
Printinginks
Cablecompounds
Unsaturatedpolyesterresins,laminatedresinsandGelcoats
Packagingandstorage Properties
HJSIL
200issuppliedin10kgkraftpaper
bags.Werecommendtostoretheproductin
closedcontainersunderdryconditionsandto
protectthematerialfromvolatilesubstances.
Characteristicphysico-chemicaldata
Reinforcementfillerinelastomers
Rheologyandthixotropycontrolofliquidsystems,
binders,polymers,etc.
Usedasanti-settling,thickening,anti-sagging
agent
Improvementoffreeflowandanti-caking
characteristicsofpowders
Hightransparency
Propertiesandtestmethods UnitTypicalValueStandardization
Specificsurfacearea(BET) m
2
/g200 25 GB/T10722
pHvalue
(in4%dispersion)
3.6~4.5 GB/T1717
Lossondrying
(2hoursat105 C)
Wt% 1.5 GB/T5211.3
Lossonignition
(2hoursat1000 C,
basedonmaterialdriedfor2hoursat105 C)
Wt% 2.5 GB/T20020
Sieveresidue(45 m) % 0.05 GB/T5211.14
Silicacontent
(basedonignitedmaterial)
Wt% 99.8 GB/T20020
Tampeddensity
(basedonmaterialdriedfor2hoursat105 C)
g/L 40~60 GB/T5211.4
Carboncontent
(basedonmaterialdriedfor2hoursat105 C)
Wt% 0.2 GB/T20020
Contactinformation
HENANMINMETALSEASTINDUSTRIALCo.,Ltd.
AddressRENMINROAD,JIAOZUOCITY,
HENANPROVINCE,454000
CHINA
Tel
Fax
Email
Internet
+863913565627
+863913565657
info@minmetalseast.com
www.minmetalseast.com
Thedatapresentedinthisdocumentisbasedonourbestknowledge.Wedisclaimanywarrantyandliabilitywhatsoeverastoaccuracyandcompleteness
ofsuchinformationaswellastothepotentialinfringementofanyproprietaryrights.Wereservetherighttoalterproductconstantswithinthescopeof
technicalprogressornewdevelopments.Anyuserofourproductsshallbearthefullriskconnectedtotheiruseincludingbutnotlimitedtotheirproperties
andfitnessforanypurpose.
HenanMinmetalsEastIndustrialCo.,Ltd|ProductinformationHJSIL
200|Jan.2019|Page1of1
by | Sep 27, 2025
UHTnEATED Fururo Slllcn
CABOT
creoling whol motlets
cAB-o-slL@ M-5
CAB-O-S|L@ M-5 untreated fumed silica is a synthetic,
amorphous, colloidal silicon dioxide that is generally
regarded as unique in industry because of its unusual
particle characteristics. CAB-0-SlL@ fumed silica’s extremely
small parlicle size, its enormous surface area, its high
purity, and its chain{orming tendencies set it apart in a
class of its own. CAB-O-$L@ fumed silica is a light, fluffy
powder that is white in appearance and is used in many
applications and in a variety of industries.
Product Form
Powder
Typical Properties
B.E.T. Surface Area zoon?lg
pH (4% aqueous slurry) 3.7 – 4.3
325 Mesh Residue (44 microns) 0.02o/omay..
Tamped Density 50 q/
Loss on Heating* < 1.5%
Specific Gravity
Wt. per gallon
2.2glcm3
18.3 lb
Refractive lndex 1.46
X-ray Form Amorphous
Assay (% Si02) > 99.8
0ilAdsorption -350
g/’100 g oil
Average Pafiicle (Aggregate) Length 0.2 – 0.3 microns
.At
time of packaging.
Cabot Corporation
www.cabot-corp.com
+
cAB-o-slL@ M-5
Functions
UnTnEATED Fumro Srr-rcn
Applications
CABOT
creoling whol motlers
Rheology Control
Reinforcement
Free Flow
Suspensi o n
Adsorbant
Adhesives & Sealants
Coati n gs
Composites
Cosmetics
Foods
lnks
Pharmaceuticals
Packaging Options
CAB-0-S|L@ fumed silicas are packaged in color-coded,
multi-wall Kraft paper bags. Grade M-5 is packaged in
NorthAmerica in 10-lb bags and in Europe in 10 kg. bags.
The bags are unitized and sized to provide product
protection, facilitate efficient handling, and maximize
payloads. Specific information regarding standard and
custom packaging may be obtained by contacting a sales
service representative at the Cabot Corporation office in
your region.
MSDS
A Material Safety Data Sheet for this product may be obtained
by contacting the Cabot Corporation office in your region or
visiting our website.
This information is provided as a convenience and for informational purposes only. No guarantee 0r warranty as to this information, or any productt0 which it
relates, is given or implied. This information may contain inaccuracies, errors or omissions and CABOT DISCLAIMS ALL WABMNTIES EXPRESS 0R IMPLIED,
INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AS TO (D SUCH INFORMATION, (iD ANY PRODUCT OR (iii) INTELLECTUAL PROPERTY
INFRINGEMENT. ln no event is Cabot responsible for, and Cabot does not accept and hereby disclaims liability for, any damages whatsoever in connection with
the use of or reliance on this information or any product to which it relates.
NORTH AMERICA
Cabot Corporation
Business and Technical Center
157 Concord Road
Billerica, MA 01821 -7001
USA
Customer Service:
Phone: (800) 526-7591
Technical Service:
Phone:+1 (978) 663-3455
Phone: (800) 462-2313
Fax: +1 (978) 670-6167
EUROPE
Cabot
lnterleuvenlaan l5 I
B-3001 Leuven
BELGIUM
Tel: +32 16 39 24 00
Fax: +32 16 39 24 44
ASIA/ PACIFIC
Cabot Specialty Chemicals
Level 21 MNI Tower 2
1 1, Jalan Pinang
50450 Kuala Lumpur
MALAYSIA
Phone: +60 3 2164 8352
Fax: +60 3 2161 0253
Cabot Specialty Chemicals
Shiba Boat Bldq.5F
3-1 -1 5 Shiba, Minato-ku
Tokyo 105-0014
JAPAN
Phone: +81 33457 7354
Fax: +81 3 3457 7658
SOI’TH AMERICA
Cabot Latin America Division
Rua do Paraiso, 148 – 50 andar
CEP 04103-000, Sdo Paulo
SP BMZIL
Customer Service:
Phone: +55 11 2144 6400
Fax: +55 11 3253 0051
MIDDLE EAST/ AFflICA
Cabot Specialty Chemicals
Jebel Ali Free Zone
LOB 15, 0ffice 424
Dubai
UNITED AMB EMIRATES
Phone: +971 4 8871 800
Fax: +971 4 8871 801
@ 2006 Cabot Corporation – All rights reserved worldwide. CAB-0-S|L@ is a registered trademark 0f Cabot Corporation. PDS-147 0406
by | Sep 27, 2025
CABOT
A
g
A ,:-,,
eu G
Become a
memberl
Distributed By
Freeman Manufacturing & Supply Co.
M.freemansupply.com 800-321-8511 FBEEMAN
CAB-O-SIL@ TS-720 FU M ED SILICA
Product highlights
CAB-O-SIL fS-720 fumed silica is a medium surface area fumed silica which
has been surface treated with polydimethylsiloxane (PDMS). This surface
treatment results in a hydrophobic silica with a very different performance
than untreated silica,
CAB-O-SILTS-720 fumed silica is characterized by
r High purity
t Aggregated structure
t Submicron particle size
o Low bulk density
r Hydrophobic surface chemistry
Key applications
CAB-O-SIL TS-720 fumed silica is used for rheology control in a wide variety of adhesives, composite and coatings
applications.
This product provides the following performance advantages in medium to high polarity systems:
r Thickeningefficiency
r Sag resistance or high film build
i Anti-settling of pigments and fillers
I Shear-thinningrheologicalbehavior
o Stable rheological performance over time
i:
i: *.:,* i’.t i’: z ;: :,i, : ::: :.
.t ;:. i t. a t ; :’;
1
1 i,1,;;,
ln epoxy adhesives and coatings, CAB-O-SlL TS-720 fumed silica provides good thickening efficiency, sag resistance
(or film build) and anti-settling of pigments and fillers.
lt4z;l”ir,’t;i.i’iv.3;;ii.. !:..tllit,’.:;iyq1.1; ;::rx:i {.’t,.:;
