by | Sep 27, 2025
Revision dale: 30 I 0312021 Version number: 3.002 Supersedes dale: 1 3l I 212020
UnivsrSolutions
SAFEW DATA SHEET
SYNTH ETIC AMORPHOUS, PYROGEN IC SILICA
SECTION 1: ldentification of the substance/mixture and of the company/undertaking
1. 1. Product identifier
Product name
Product number
Synonyms; lrade names
REACH registration number 01-2119379499-16-XXXX
CAS number 7631-86-9
EC number 231-545-4
1.2. Relevant identified uses of the substance or mirture and uses advised against
ldentified uses
1.3. Details of the supplier of the safety data sheet
Supplier Univar Solutions UK Ltd
Aquarius House
6 Mid Point Business Park
Bradford
BD3 7AY
+44 1274 267300
+44 1274 267306
SDS. EMEA@univarsolutions.com
1.4. Emergency telephone number
SYNTHETIC AMORPHOUS, PYROGENIC SILICA
20571
CAB-O-SIL MsP UNTREATED FUMED SILICA PHARMACEUTICAL GRADE, CAB-O-SIL
EH-5 UNTREATED FUMED SILICA, CAB-O-SIL M-5 UNTREATED FUMED SILICA, CAB-O-
SIL HP-60 UNTREATED FUMED SILICA, CAB-O-SIL M5F UNTREATED FUMED SILICA
FOOD GRADE, CAB-O-SIL MS-75D UNTREATED FUMED SILICA, CAB-O-SIL H-5
UNTREATED FUMED SILICA, CAB-O-SIL LM-150 UNTREATED FUMED SILICA, CAB-O-
SIL MsDP UNTREATED FUMED SILICA PHARMACEUTICAL GRADE, CAB-O-SIL M-7D
UNTREATED FUMED SILICA, CAB-O-SIL S17D UNTREATED FUMED SILICA, CAB-O.SIL
L 90 UNTREATED FUMED SILICA
rheological control, flow agent, reinforcing agent, in coatings, adhesives Thickener Chemical
lntermediate Production of Rubber Cosmetics inks Paint.
Emergency telephone
Sds No.
SGS – +32 (0)3 57s 55 55 (24h)
20571
SECTION 2: Hazards identification
2.1. Classification of the substance or mirture
Classifi cation (EC 1 27 21 2OOB)
Physical hazards
Health hazards
Environmental hazards
Not Classified
Not Classified
Not Classified
Revision dale: 30 lO3 12021
EC number
Hazard statements
2.3. Other hazards
Version number: 3.002 Supersedes dale: 1 31 1 212020
SYNTHETIC AMORPHOUS, PYROGEN IC SILICA
231-545-4
NC Not Classified
This substance is not classified as PBT or vPvB according to current EU criteria
SECTION 3: Compositionfinformation on ingredients
3.1. Substances
Product name
REACH registration number
CAS number
EC number
Composition comments
SYNTHETIC AMORPHOUS, PYROGENIC SILICA
01 -21 1937 9499-1 6-XXXX
7631 -86-9
231-545-4
The data shown are in accordance with the latest EC Directives.
SECTION 4: First aid measures
4.1. Description of first aid measures
lnhalation Move affected person to fresh air at once. Rinse nose and mouth with water. Get medical
attention if any discomfort continues.
Rinse mouth thoroughly with water. Give plenty of water to drink. Give milk instead of water if
readily available. Never give anything by mouth to an unconscious person. Get medical
attention if any discomfort continues. Do not induce vomiting.
Remove affected person from source of contamination. Remove contaminated clothing. Wash
skin thoroughly with soap and water. Get medical attention if any discomfort continues.
Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide
apart. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort
continues.
lngestion
Eye contract
4.2. Most imporlant symptomsand effects, both acute and delayed
Skin contact
lnhalation
Eye contact
May cause respiratory irritation.
May cause temporary eye irritation.
4.3. lndication ofimmediate medical aftention and specialtreatment needed
Notes for the doctor No specific recommendations. lf in doubt, get medical attention promptly.
SECTION 5: measures
5.1. media
Suitable extinguishing media The product is not flammable. Use fire-extinguishing media suitable for the surrounding fire.
Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire.
media
5.2. Special hazards aising from the substance or mirture
Specific hazards Dust may form explosive mixture with air. When heated and in case of fire, toxic
vapours/gases may be formed.
Hazardous combustion
products
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or
vapours- Oxides of the following substances: Carbon.
4 ? Aritioa far firafinhlarc
Revision dale: 3010312021
Special protective equipment
for firefighters
Version number: 3.002 Supersedes dalei I 31 1 212020
SYNTHETIC AMORPHOUS, PYROGEN IC SILICA
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protectiveequipment and emergency procedures
Personal precautions Provide adequate ventilation. Wear protective clothing as described in Section 8 of this safety
data sheet. Follow precautions for safe handling described in this safety data sheet. Avoid
inhalation of dust and contact with skin and eyes.
6. 2. Envi ro n me nta I p recautions
Environmental precautions Do not discharge into drains or watercourses or onto the ground. Spillages or uncontrolled
discharges into watercourses must be reported immediately to the Environmental Agency or
other appropriate regulatory body.
6.3. Methods and materialfor antainment and cleaning up
Methods for cleaning up Remove spillage with vacuum cleaner or collect with a shovel and broom, or similar. Flush
contaminated area with plenty of water. Collect and place in suitable waste disposal
containers and seal securely. For waste disposal, see Section 13.
6.4. Reference to other sec,tions
Reference to other sections Wear protective clothing as described in Section 8 of this safety data sheet. For waste
disposal, see Section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Usage precautions Follow precautions for safe handling described in this safety data sheet. Wear protective
clothing as described in Section 8 of this safety data sheet. Avoid inhalation of dust and
contact with skin and eyes. Provide adequate ventilation. Dust may form explosive mixture
with air.
7.2. Conditions for safe i ncl ud i ns any i nam patibi I iti es
Storage precautions Store in tightly-closed, original container in a dry, cool and well-ventilated place. Stable at
normal ambient temperatures.
7.3. Specific end use(s)
Specific end use(s) The identified uses for this product are detailed in Section 1.2
SECTION 8: Eposure controls/Personal protection
8. 1. Control parameters
Occupational exposure limits
Long{erm exposure limit (8-hour TWA): WEL 2.4 mglms respirable dust
Long-term exposure limit (8-hour TWA): WEL 6 mg/m” inhalable dust
WEL = Workplace Exposure Limit.
lngredient comments WEL = Workplace Exposure Limits
8.2. Exposure antrols
Protective equipment
s@@e
Revision dale: 30 lO3 12021
Appropriate engineering
controls
Eyelface protection
Hand protection
Other skin and body
protection
Hygiene measures
Respiratory protection
Version number: 3.002 Supersedes dale: I 31 1 212020
SYNTHETIC AMORPHOUS, PYROGENIC SILICA
Provide adequate ventilation. Avoid inhalation of dust. Observe any occupational exposure
limits for the product or ingredients.
Eyewear complying with an approved standard should be worn if a risk assessment indicates
eye contact is possible. Chemical splash goggles. Personal protective equipment for eye and
face protection should comply with European Standard EN166.
The most suitable glove should be chosen in consultation with the glove
supplier/manufacturer, who can provide information about the breakthrough time of the glove
material. Chemical-resistant, impervious gloves complying with an approved standard should
be worn if a risk assessment indicates skin contact is possible. To protect hands from
chemicals, gloves should comply with European Standard EN374.
Eye wash facilities and emergency shower must be available when handling this product.
When using do not eat, drink or smoke.
Respiratory protection complying with an approved standard should be worn if a risk
assessment indicates inhalation of contaminants is possible. lf ventilation is inadequate,
suitable respiratory protection must be worn. High-efficiency particulate filter. EN
1361 1 40 I 1 41 I 1 451 1 431 I 49
SECTION 9: Physicaland chemical properties
9.1. Information on basic physicaland chemical properties
Appearance
Golour
Odour
Odour threshold
pH
Melting point
lnitial boiling point and range
Flash point
Evaporation rate
Evaporation factor
Flammability (solid, gas)
Upper/lower fl ammability or
explosive limits
Other flammability
Vapour pressure
Vapour density
Relative density
Bulk density
Solubility(ies)
Partition coefficient
Powder. Solid
White.
Odourless.
No information available.
pH (concentrated solution): 3.6 – 4.5
1700’c
2230’C
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
2.2 @2O”C
30 – 150 kg/m3
Slightly soluble in water.
No information available.
Revision dale: 3010312021
Decomposition Temperature
Viscosity
Explosive properties
Explosive under the influence
of a flame
Oxidising properties
9.2. Other information
Other information
Refractive index
Particle size
Molecular weight
Volatility
Saturation concentration
Gritical temperature
Volatile organic compound
Version number: 3.002
SYNTHETIC AMORPHOUS, PYROGENIC SILICA
No information available.
No information available.
Not considered to be explosive
No information available.
Does not meet the criteria for classification as oxidising.
Not available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
No information available.
Supersedes dale: 1 31 1 21 2020
SECTION 10: Stability and reactivity
10.1. Reactivity
Reactivity
1 0.2. Chemial stability
There are no known reactivity hazards associated with this product.
Stability Stable at normal ambient temperatures and when used as recommended
10.3. Possibility of hazardous reactions
Will not polymerise. Under normal conditions of storage and use, no hazardous reactions will
occur
10.4. Conditions to avoid
Conditions to avoid
1 0.5. Inumpatible mateials
Avoid excessive heat for prolonged periods of time. Avoid dust close to ignition sources
Materials to avoid No specific material or group of materials is likely to react with the product to produce a
hazardous situation.
1 0.6. Hazardous denmposition products
Possibility of hazardous
reactions
Hazardous decomposition
products
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or
vapours. Oxides of the following substances: Carbon.
SECTION 1 1 : Toxicological information
11.1. lnformation on toxicnlogical effects
Acute toxicity – oral
Acute toxicity oral (LDso
mS/kS)
Species
Nolcs {oral I D*
5,000.0
Rat
otrcD 4n1
Revision dale: 3O IO3 12021 Version number: 3.002
SYNTHETIC AMORPHOUS, PYROGENIC SILICA
Acute toxicity – dermal
Acute toxicity dermal (LDso
mg/kg)
Species
Notes (dermalLDso)
Skin conosion/initation
2,000.0
Animaldata
Serious eye damage/initation
Not irritating
Serious eye damage/irritation Based on available data the classification criteria are not met.
Respiratory sensitisation
Respiratory sensitisation
Skin sensitisation
Not sensitising
Skin sensitisation
Germ cell mutaoenicitv
Not sensitising
Genotoxicity – in vitro Negative.
Carcinogenicity
Carcinogenicity Based on available data the classification criteria are not met.
Reproductive toxicity
Reproductive toxicity – fertility Based on available data the classification criteria are not met.
Specific target organ toxicity – single exposure
STOT – single exposure Based on available data the classification criteria are not met.
Specific target organ toxicity – repeated exposure
STOT – repeated exposure Based on available data the classification criteria are not met.
Aspiration hazard
Aspiration hazard Based on available data the classification criteria are not met.
Supersedes dale: 1 3l I 2l2O2O
Rabbit
OECD 402
Dust in high concentrations may irritate the respiratory system.
May cause discomfort if swallowed.
Skin irritation should not occur when used as recommended. Prolonged and frequent contact
may cause redness and irritation.
Particles in the eyes may cause irritation and smarting.
lnhalation
lngestion
Skin contact
Eye contact
SECTION 1 2: Ecological information
Ecotoxicity The product components are not classified as environmentally hazardous. However, large or
frequent spills may have hazardous effects on the environment.
12.1. Toxicity
Toxicity
Acute aquatic toxicity
LC50, 96 hours: >10000 mg/|, Brachydanio rerio (Zebra Fish)
oEcD 203
Not considered toxic to fish.
Acute toxicity – fish
Revision dale: 30 I 0312021
Acute toxicity – aquatic
invertebrates
Bioaccumulative potential
Partition coefficient
12.4. Mobility in soil
Mobility Slightly soluble in water
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB
assessment
12.6. Other adverse effects
Other adverse effects
Version number: 3.002 Supersedes dale: 1 31 1 212020
12.2. Percistence and degradability
Persistence and degradability The product contains mainly inorganic substances which are not biodegradable
1 2.3. Bioaccumulative potential
SYNTHETIC AMORPHOUS, PYROGENIC SILICA
EL, E150, : > 1000 – 10000 mg/|, Daphnia magna
OECD 202
The product does not contain any substances expected to be bioaccumulating.
No information available.
This substance is not classified as PBT or vPvB according to current EU criteria.
Not available
SECTION 1 3: Disposal considerations
13.1. Waste treatment methods
General information
Disposalmethods
Waste should be treated as controlled waste. Do not puncture or incinerate, even when
empty.
Dispose of waste to licensed waste disposal site in accordance with the requirements of the
local Waste Disposal Authority.
SECTION 14: Transport information
General The product is not covered by international regulations on the transport of dangerous goods
(rMDG, |ATA, ADR/RrD).
14.1. UN number
No information required.
14.2. UN proper shipping name
No information required.
14.3. Transport hazard class(es)
No information required
14.4. Packing group
No information required.
1 4.5. Environmental hazards
Environmentally hazardous substance/marine pollutant
No.
14.6. Special precautions for user
No information required.
14.7. Transport in bulk according to Annex ll of MARPOL and the IBC Code
Revision dale: 3010312021
Transport in bulk according to No information required
Annex ll of MARPOL 73118
and the IBC Code
Version number: 3.002
SYNTHETIC AMORPHOUS, PYROGENIC SILICA
Supersedes dale: 1 31 1 212020
SECTION 15: Regulatory information
15.1. Safety, health and environmental specifrc for the substance or mixture
EU legislation
15.2. Chemical safety assessment
A chemical safety assessment has been carried out.
lnventories
EU – EINECS/ELINCS
All the ingredients are listed or exempt.
Canada – DSUNDSL
All the ingredients are listed or exempt.
US – TSCA
All the ingredients are listed or exempt.
Australia – AICS
All the ingredients are listed or exempt.
Japan – ENCS
All the ingredients are listed or exempt.
Korea – KECI
All the ingredients are listed or exempt.
China – IECSC
All the ingredients are listed or exempt.
Philippines – PICCS
All the ingredients are listed or exempt.
New Zealand – NZIOC
All the ingredients are listed or exempt.
Taiwan – TCSI
All the ingredients are listed or exempt.
Regulation (EC) No 190712006 of the European Parliament and of the Council of 1 8
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) (as amended).
Regulation (EC) No 127212008 of the European Parliament and of the Council of 16
December 2008 on classification, labelling and packaging of substances and mixtures (as
amended).
Commission Regulation (EU) No 2015/830 of 28 May 2015.
SECTION 16: Other information
Revision dale: 3010312021
Abbreviations and acronyms
used in the safety data sheet
Classifi cation abbreviations
and acronyms
Key literature references and
sources for data
Revision comments
Revision date
Version number
Supersedes date
Version number: 3.002 Supersedes dale: 1 31 1 212020
SYNTHETIC AMORPHOUS, PYROGENIC SILICA
ATE: Acute Toxicity Estimate.
ADR: European Agreement concerning the lnternational Carriage of Dangerous Goods by
Road.
ADN: European Agreement concerning the lnternational Carriage of Dangerous Goods by
lnland Waterways.
CAS: Chemical Abstracts Service.
DNEL: Derived No Effect Level.
IATA: lnternational Air Transport Association.
IMDG: lnternational Maritime Dangerous Goods.
Kow: Octanol-water partition coefficient.
LCso: Lethal Concentration to 50 % of a test population.
LDso: Lethal Dose to 50% of a test population (Median Lethal Dose).
PBT: Persistent, Bioaccumulative and Toxic substance.
PNEC: Predicted No Effect Concentration.
REACH: Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation
(EC) No’190712006.
RID: European Agreement concerning the lnternational Carriage of Dangerous Goods by
Rail.
vPvB: Very Persistent and Very Bioaccumulative.
IARC: lnternational Agency for Research on Cancer.
MARPOL 73/78: lnternational Convention for the Prevention of Pollution From Ships, 1973 as
modified by the Protocol of 1978.
cATpE: Converted Acute Toxicity Point Estimate.
BCF: Bioconcentration Factor.
BOD: Biochemical Oxygen Demand.
ECso: 50% of maximal Effective Concentration.
LOAEC: Lowest Observed Adverse Effect Concentration.
LOAEL: Lowest Observed Adverse Effect Level.
NOAEC: No Observed Adverse Effect Concentration.
NOAEL: No Observed Adverse Effect Level.
NOEC: No Observed Effect Concentration.
LOEC: Lowest Observed Effect Concentration.
DMEL: Derived Minimal Effect Level.
EL50: Exposure Limit 50
hPa: Hectopascal
LL50: Lethal Loading fifty
OECD: Organisation for Economic Co-operation and Development
POW: Octanol-water partition coefficient
SCBA: self-contained breathing apparatus
STP: Sewage Treatment Plant
VOC: Volatile Organic Compounds
Acute Tox. = Acute toxicity
Aquatic Acute = Hazardous to the aquatic environment (acute)
Aquatic Chronic = Hazardous to the aquatic environment (chronic)
Supplier’s information
NOTE: Lines within the margin indicate significant changes from the previous revision.
30t03t2021
3.002
13t12t2020
Revision date: 30/03/2021
SDS status
Signature
Version number: 3.002 Supersedes dale: 1 31 1 212020
SYNTHETIC AMORPHOUS, PYROGENIC SILICA
Approved.
Jitendra Panchal
This information relates only to the specific material designated and may not be valid for such material used in combination
with any other materials or in any process. Such information is, to the best of the company’s knowledge and belief, accurate
and reliable as of the date indicdted- However- no warrantv. ouarantee or reoresentation is made to its accuracv. reliabilitv or
by | Sep 27, 2025
HJSIL
MATERIALSAFETYDATASHEET
HJSIL
FUMEDSILICAMSDS
https://www.minmetalseast.com|Email:info@minmetalseast.com
HenanMinmetalsEastIndustrialCo.,Ltd|MSDSHJSILFUMEDSILICA|Sep.2019
Page1of9
1.IDENTIFICATIONOFTHESUBSTANCE/PREPARATIONANDTHECOMPANY/UNDERTAKING
Productname
Synonyms
Validity
Application
Company
Telephone
Fax
FumedSilica
SiliconDioxide,SyntheticAmorphousSilica,
(Fumed)AmorphousSilica
HJSIL150,HJSIL200,HJSIL300,HJSIL380
HJSILR110,HJSILR110H,HJSILR272,HJSILR274,HJSILR612,
HJSILR620,HJSILR622,HJSILR6200
Forindustrialuseonly
Rheologycontrol,reinforcement,freeflowagentincoatings,adhesives
andotherapplications
HenanMinmetalsEastIndustrialCo.,Ltd.
RenminRoad,
JiaozuoCity,HenanProvince,
P.R.China454000
+863913565627
+863913565657
2.HAZARDSIDENTIFICATION
Indicationofdanger:
NotahazardoussubstanceorpreparationaccordingtotheGlobalHarmonizedSystem(GHS)
Principleroutesofexposure:
Inhalation,Skincontact,Eyecontact
POTENTIALHEALTHEFFECTS
a.Eyecontact:
Maycausemechanicalirritation.Irritating,butwillnotpermanentlyinjureeyetissue.Lowhazardfor
usualindustrialorcommercialhandling.
b.Skincontact:
Repeatedexposuremaycauseskindrynessorcracking.
c.Inhalation:
Dustmaybeirritatingtorespiratorytract.Provideappropriateexhaustventilationatmachineryandat
placeswheredustcanbegenerated.
HJSIL
MATERIALSAFETYDATASHEET
HJSIL
FUMEDSILICAMSDS
https://www.minmetalseast.com|Email:info@minmetalseast.com
HenanMinmetalsEastIndustrialCo.,Ltd|MSDSHJSILFUMEDSILICA|Sep.2019
Page2of9
d.Ingestion:
Healthinjuriesarenotknownorexpectedundernormaluse.Lowhazardforusualindustrialor
commercialhandling.
e.CarcinogenicEffects:
Doesnotcontainanysubstancesgreaterthan0.1%listedby
IARC(InternationalAgencyforResearchonCancer),
NTP(NationalToxicologyProgram),
OSHA(OccupationalSafetyandHealthAdministration),
ACGIH(AmericanConferenceforGovernmentalIndustrialHygienists),
EU(EuropeanUnion).
f.TargetOrganEffects:
Lungs
g.MedicalConditionsAggravatedbyExposure:
Asthma,Respiratorydisorder
h.PotentialEnvironmentalEffects:
Nospecialenvironmentalprecautionsrequired.
3.COMPOSITION/INFORMATIONONINGREDIENTS
Chemicalname
CASNumber
Content
FumedSilica
112945-52-5,7631-86-9
SiO
2>99.8%
4.FIRSTAIDMEASURES
SkinContact:
Washthoroughlywithsoapandwater.Seekmedicalattentionifredness,swelling,itching,orburning
occurs.
EyeContact:
Flusheyesimmediatelywithlargeamountsofwaterfor15minutes.Seekmedicalattentionif
redness,swelling,itching,burningorvisualdisturbancesoccur.
Inhalation:
Ifcough,shortnessofbreathorotherbreathingproblemsoccur,movetofreshair.Seekmedical
attentionifsymptomspersist.Ifnecessary,restorenormalbreathingthroughstandardfirstaid
measures.
HJSIL
MATERIALSAFETYDATASHEET
HJSIL
FUMEDSILICAMSDS
https://www.minmetalseast.com|Email:info@minmetalseast.com
HenanMinmetalsEastIndustrialCo.,Ltd|MSDSHJSILFUMEDSILICA|Sep.2019
Page3of9
Ingestion:
Donotinducevomiting.Ifconscious,giveseveralglassesofwater.Nevergiveanythingbymouthto
anunconsciousperson.
NotestoPhysician:
Treatsymptomatically.
5.FIRE-FIGHTINGMEASURES
ExtinguishingMedia:
Useextinguishingmeasuresthatareappropriatetolocalcircumstancesandthesurrounding
environment.
SpecialProtectiveEquipmentforFirefighters:
Wearsuitableprotectiveequipment.Intheeventoffire,wearself-containedbreathingapparatus.
SpecificHazards:
Productresistsignitionanddoesnotpromoteflamespread.
HazardousDecompositionand/orCombustionProducts:
None.
RiskofDustExplosion:
Thismaterialisaninorganicdustandwillnotcreatenorsupportconditionsthatwouldresultinadust
explosionorfire.
6.ACCIDENTALRELEASEMEASURES
PersonalPrecautions:
Avoiddustformation.Removeallsourcesofignition.Ensureadequateventilation.Usepersonal
protectiveequipment.
MethodsforCleaningUp:
Cleanuppromptlybyvacuum.Useasuitablevacuumcleaner.Donotcreateadustcloudbyusinga
brushorcompressedair.Pickupandtransfertoproperlylabeledcontainers.
EnvironmentalPrecautions:
Nospecialenvironmentalprecautionsrequired.Localauthoritiesshouldbeadvisedifsignificant
spillagescannotbecontained.
HJSIL
MATERIALSAFETYDATASHEET
HJSIL
FUMEDSILICAMSDS
https://www.minmetalseast.com|Email:info@minmetalseast.com
HenanMinmetalsEastIndustrialCo.,Ltd|MSDSHJSILFUMEDSILICA|Sep.2019
Page4of9
7.HANDLINGANDSTORAGE
Handling:
Avoidcontactwithskinandeyes.Avoiddustformation.Donotbreathedust.Provideappropriate
exhaustventilationatmachineryandatplaceswheredustcanbegenerated.Donotcreateadust
cloudbyusingabrushorcompressedair.Takeprecautionarymeasuresagainststaticdischarge.All
metalpartsofthemixingandprocessingequipmentmustbeearthed/grounded.Ensureallequipment
iselectricallyearthed/groundedbeforebeginningtransferoperations.
Storage:
Keepcontainerstightlyclosedinadry,coolandwell-ventilatedplace.Donotstoretogetherwith
volatilechemicalsastheymaybeadsorbedontoproduct.Keepatambienttemperatures.
8.EXPOSURECONTROLS/PERSONALPROTECTION
ENGINEERINGCONTROLS:
Ensureadequateventilationtomaintainexposuresbelowoccupationallimits.Provideappropriate
exhaustventilationatmachineryandatplaceswheredustcanbegenerated.
PERSONALPROTECTIVEEQUIPMENT/RespiratoryProtection:
Approvedrespiratormaybenecessaryiflocalexhaustventilationisnotadequate.
HandProtection:
Repeatedexposuremaycauseskindrynessorcracking.Useprotectivebarriercreambefore
handlingtheproduct.Wearsuitablegloves.
EyeProtection:
Weareye/faceprotection.Safetyglasseswithside-shields.Goggles.
SkinandBodyProtection:
Wearsuitableprotectiveclothing.Nospecialprotectiveequipmentrequired.
Others:
Handleinaccordancewithgoodindustrialhygieneandsafetypractice.Emergencyeyewashand
safetyshowershouldbelocatednearby.
HJSIL
MATERIALSAFETYDATASHEET
HJSIL
FUMEDSILICAMSDS
https://www.minmetalseast.com|Email:info@minmetalseast.com
HenanMinmetalsEastIndustrialCo.,Ltd|MSDSHJSILFUMEDSILICA|Sep.2019
Page5of9
9.PHYSICALANDCHEMICALPROPERTIES
Appearance
Odor
PH
Density
SpecificGravity
BoilingPoint/Range
MeltingPoint/Range
VaporPressure
WaterSolubility
%Volatile(byVolume)
EvaporationRate
Viscosity
PartitionCoefficient
(n-octanol/water)
FlashPoint
Method
ExplosionLimitsinAir
-Upper(g/m3)
ExplosionLimitsinAir
-Lower(g/m3)
AutoignitionTemperature
Method
Whitepowder
None
3.6-4.5
2.2g/cm @20 C
Notapplicable
2230 C
1700 C
Notdetermined
Insoluble
Notapplicable
Notdetermined
Notdetermined
Notapplicable
Notdetermined
Notapplicable
Notdetermined
Notapplicable
Notdetermined
Notdetermined
HJSIL
MATERIALSAFETYDATASHEET
HJSIL
FUMEDSILICAMSDS
https://www.minmetalseast.com|Email:info@minmetalseast.com
HenanMinmetalsEastIndustrialCo.,Ltd|MSDSHJSILFUMEDSILICA|Sep.2019
Page6of9
10.STABILITYANDREACTIVITY
Stability:
Stable.
HazardousPolymerization:
Hazardouspolymerizationdoesnotoccur.
MechanicalSensitivity(shock):
Notsensitivetomechanicalimpact
ConditionstoAvoid:
Keepawayfromheatandsourcesofignition.Avoiddustformation.Productresistsignitionanddoes
notpromoteflamespread.
HazardousDecompositionand/orCombustionProducts:
None.
StaticDischargeEffects:
Takeprecautionarymeasuresagainststaticdischarges.Avoiddustformation.Allmetalpartsofthe
mixingandprocessingequipmentmustbeearthed/grounded.Ensureallequipmentiselectrically
earthed/groundedbeforebeginningtransferoperations.Thismaterialisaninorganicdustandwillnot
createnorsupportconditionsthatwouldresultinadustexplosionorfire.
11.TOXICOLOGICALINFORMATION
ACUTETOXICITY
OralLD50
InhalationLC50
DermalLD50
EyeIrritation
SkinIrritation
LD50/oral/rat=>5000mg/kg
Duetotheproduct’sphysicalcharacteristics,nosuitabletesting
procedureisavailable.
LD50/dermal/rabbit=>2000mg/kg
Draizescore0.7/110@24hr.Non-irritating
0/8.Non-irritating
SUBCHRONICTOXICITY
Nodataareavailableontheproductitself.
HJSIL
MATERIALSAFETYDATASHEET
HJSIL
FUMEDSILICAMSDS
https://www.minmetalseast.com|Email:info@minmetalseast.com
HenanMinmetalsEastIndustrialCo.,Ltd|MSDSHJSILFUMEDSILICA|Sep.2019
Page7of9
CHRONICTOXICITY
a.CarcinogenicEffects:
Doesnotcontainanysubstancesgreaterthan0.1%listedby
IARC(InternationalAgencyforResearchonCancer),
NTP(NationalToxicologyProgram),
OSHA(OccupationalSafetyandHealthAdministration),
ACGIH(AmericanConferenceforGovernmentalIndustrialHygienists),
EU(EuropeanUnion).
OTHER
MutagenicEffects:
NotmutagenicinAMESTest,unscheduledDNAsynthesis,chromosomalaberrationinChinese
hamsterovary(CHO)cells.
ReproductiveToxicity:
Didnotshowteratogeniceffectsinanimalexperiments.Accordingtoexperiencenotexpected.
SensitizingEffects:
AdelayedcontacthypersensitivitystudyinguineapigsutilizingtheMagnussonandKligman
Maximizationtechniquewasperformed.Nosensitizationresponseswereobserved.
SynergisticMaterials:
Nonereasonablyforeseeable.
12.ECOLOGICALINFORMATION
ACUTETOXICITY
AquaticToxicity
ENVIRONMENTALFATE
Mobility
Bioaccumulation
Persistence/Degradability
DistributiontoEnvironmental
Compartments
Fish(Brachydaniorerio)NOEC(96hours)=10,000mg/l
(Method:OECD203)
DaphniamagnaNOEC(24hours)=10,000mg/l
(Method:OECD202)
Notexpectedtomigrate
Accordingtoexperiencenotexpected
Themethodsfordeterminingbiodegradabilityarenot
applicabletoinorganicsubstances
Notdetermined
HJSIL
MATERIALSAFETYDATASHEET
HJSIL
FUMEDSILICAMSDS
https://www.minmetalseast.com|Email:info@minmetalseast.com
HenanMinmetalsEastIndustrialCo.,Ltd|MSDSHJSILFUMEDSILICA|Sep.2019
Page8of9
13.DISPOSALCONSIDERATIONS
Material
a.Recommendation:
Aftersolidification,materialcanbestoredtogetherwithdomesticwaste.Observelocal/state/federal
regulations.
Uncleanedpackaging
a.Recommendation:
Completelydischargecontainers(noteardrops,nopowderrest,scrapedcarefully).Containersmay
berecycledorre-used.Observelocal/state/federalregulations.
14.TRANSPORTINFORMATION
Notclassifiedasdangerousinthemeaningoftransportregulations:
USDepartmentofTransportation
CanadianTransportofDangerousGoodsRegulation
EuropeanTransportofDangerousGoodsRegulation
GGVS,GGVE,RID,ADR,IMDGCode,ICAO-TI
UnitedNations(noUNnumber)
15.REGULATORYINFORMATION
ThisproducthasbeenclassifiedinaccordancewiththehazardcriteriaoftheControlledProducts
RegulationsandtheMSDScontainsalltheinformationrequiredbytheControlledProducts
Regulations.
InternationalInventories
Allcomponentsofthisproductarelistedonorexemptfromthefollowing
inventories:
YES-AustralianInventoryofChemicalSubstances(AICS)
YES-CanadianDomesticSubstancesList(DSL)
YES-ChineseInventory
YES-EuropeanInventoryofExistingCommercialChemicalSubstances(EINECS)
YES-JapaneseExistingandNewChemicalSubstances(ENCS)
YES-KoreanExistingChemicalsList(KECL)
YES-NewZealandHazardousSubstancesandNewOrganismsAct(HSNO)
YES-PhilippineInventoryofChemicalsandChemicalSubstances(PICCS)
YES-UnitedStatesToxicSubstancesControlAct(TSCA)Inventory
U.S.FederalRegulations
TSCA12(b)ExportNotification:
ThisproductdoesnotcontainanycomponentsthataresubjecttoTSCA12(b)ExportNotification.
HJSIL
MATERIALSAFETYDATASHEET
HJSIL
FUMEDSILICAMSDS
https://www.minmetalseast.com|Email:info@minmetalseast.com
HenanMinmetalsEastIndustrialCo.,Ltd|MSDSHJSILFUMEDSILICA|Sep.2019
Page9of9
CleanAirActAmendmentsof1990(CAA,Section112,40CFR82):
ThisproductdoesnotcontainanycomponentslistedasaHazardousAirPollutant,Flammable
Substance,ToxicSubstance,orClass1or2OzoneDepletor.
CleanWaterAct(CWA,40CFR116)PriorityPollutants:
ThisproductdoesnotcontainanylistedPriorityPollutants.
ComprehensiveEnvironmentalResponse,
CompensationandLiabilityAct(CERCLA,40CFR302):
ThisproductdoesnotcontainanylistedHazardousSubstances.
SuperfundAmendmentsandReauthorizationAct,TitleIII(SARA)
a.SARASection302(40CFR355)ExtremelyHazardousSubstances:
NocomponentsarelistedasextremelyhazardouschemicalsunderSARASection302.
b.SARASections311/312(40CFR370)HazardCategory:
ThisproductdoesnotmeetanyoftheMSDSRequirementdefinitionsforahazardousmaterial
underSARASections311/312.Reportingmayberequiredifthematerialispresentatanyonetimein
amountsequaltoorgreaterthan10,000pounds.
c.SARASection313(40CFR372)ToxicsReleaseInventory:
DoesnotcontainanyofthesubstancesidentifiedunderSection313astoxicchemicalsinexcessof
thedeminimisconcentrationsnecessarytobesubjecttothesuppliernotificationrequirements.
FoodandDrugAdministration(FDA):
Notavailable.
CosmeticUse:
Notavailable.
PharmaceuticalInformation:
Notavailable.
U.S.StateRegulations:
a.CaliforniaProposition65:
ThisproductdoesnotcontainanycomponentslistedonCaliforniaProposition65.
ThisproductisnotlistedonCaliforniaProposition65.
b.USCoalitionofNortheasternGovernors(CONEG)MetalsList:
ThisproductmeetstheCONEGSourceReductionCouncillimitsforthesumofthelevelsoflead,
cadmium,mercuryandhexavalentchromiumoflessthan100partspermillionbyweight.
16.OTHERINFORMATION
Material:
Theaboveinformationdescribesexclusivelythesafetyrequirementsoftheproduct(s)andisbasedon
ourpresent-dayknowledge.Itdoesnotrepresentaguaranteeforthepropertiesoftheproduct(s)
describedintermsofthelegalwarrantyregulations.Propertiesoftheproductaretobefoundinthe
respectiveproductleaflet:
RevisionDate:10/SEPTEMBER/2019
by | Sep 27, 2025
SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Product name: CAB-O-SIL TS-720 Fumed Silica
Product code: TS720
Synonyms: Silicon Dioxide, Synthetic Amorphous Silica, Pyrogenic (Fumed) Amorphous Silica
This SDS is valid for
the following grades:
TS720, TS720D.
Recommended use: Various, Rheological control, Flow agent, Thickening agent, Glossing or matting agent,
Reinforcing agent in: Coatings, Adhesives and/or sealants, Inks, Silicone Elastomer,
Rubber products, Dispersion, Suspension, Cosmetics, Paints, Hygiene and sanitary
products, Other
Restrictions on use: Not Applicable
Supplier:
Emergency Telephone Number: 24H/7d service
Canada: CANUTEC 1-613-996-6666
GERMANY: CHEMTREC 0800-181-7059
US: CHEMTREC: 1-800-424-9300 or 1-703-527-3887
UK: CHEMTREC: (+44)-870-8200418
International CHEMTREC: +1 703-741-5970 or +1-703-527-3887
2. HAZARDS IDENTIFICATION
Classification
OSHA Regulatory Status: This chemical is considered hazardous by the United States 2012 OSHA Hazard
Communication Standard (29 CFR 1910.1200).
Label Elements:
United States Hazard Communication Standard 29 CFR 1910.1200 (2012)
Canada Hazardous Products Regulations (SOR/2015-17)
Revision date:28-Nov-2019
Cabot Corporation
4400 North Point Parkway
Suite 200
Alpharetta, Georgia 30022
United States
Tel: +1 678 297 1300
Cabot Corporation
157 Concord Road
Billerica, MA 01821
UNITED STATES
Tel: 1-978-663-3455
Fax: 1-978-670-6955
Combustible dust
___________________________________________________________________________________________
Page 1 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
Pictogram: None
Signal Word: WARNING
Hazard statements: May form combustible dust concentrations in air
Precautionary Statements –
Prevention
Keep away from all ignition sources including heat, sparks and flame
Prevent dust accumulations to minimize explosion hazard
Hazards not otherwise classified (HNOC)
Do not expose to temperatures above 150 C. Hazardous products of combustion can include carbon monoxide, carbon
dioxide and formaldehyde.
Potential health effects
Principle Routes of Exposure:Inhalation, Skin Contact, Eye contact
Eye Contact: May cause mechanical irritation. Avoid contact with eyes.
Skin Contact: May cause mechanical irritation and skin drying. Avoid contact with skin. No cases of
sensitization in humans have been reported.
Inhalation: Dust may be irritating to respiratory tract. Provide appropriate exhaust ventilation at
machinery and at places where dust can be generated. See also Section 8.
Ingestion: Adverse health effects are not expected. See Section 11.
Carcinogenicity: Does not contain any substances greater than 0.1% listed by IARC (International Agency
for Research on Cancer), NTP (National Toxicology Program), OSHA (Occupational Safety
and Health Administration), ACGIH (American Conference for Governmental Industrial
Hygienists) or EU (European Union). See also Section 11.
Target Organ Effects: Lungs, See Section 11
Medical Conditions Aggravated by
Exposure:
Asthma, Respiratory disorder
Potential Environmental Effects:None known. See Section 12.
___________________________________________________________________________________________
Page 2 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
3. COMPOSITION/INFORMATION ON INGREDIENTS
Synonyms: Silicon Dioxide, Synthetic Amorphous Silica, Pyrogenic (Fumed) Amorphous Silica.
Chemical name CAS No weight-% Trade secret
Siloxanes and Silicones, di-Me, reaction products
with silica
67762-90-7 100 –
Other Information:
The hyphen (-) means “not applicable”
4. FIRST AID MEASURES
FIRST AID MEASURES
Skin Contact Wash thoroughly with soap and water. Seek medical attention if symptoms develop.
Eye contact Flush eyes immediately with large amounts of water for 15 minutes. Seek medical
attention if symptoms develop.
Inhalation If cough, shortness of breath or other breathing problems occur, move to fresh air. Seek
medical attention if symptoms persist. If necessary, restore normal breathing through
standard first aid measures.
Ingestion Do not induce vomiting. If conscious, give several glasses of water. Never give anything
by mouth to an unconscious person.
Most important symptoms and effects, both acute and delayed
Symptoms: The most important known symptoms and effects are described in Section 2 and/or in
Section 11.
Indication of any immediate medical attention and special treatment needed
Note to physicians: Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment. Use foam, carbon dioxide (CO2), dry chemical or water spray.
A fog is recommended if water is used.
Unsuitable Extinguishing Media:DO NOT USE high pressure media which could cause formation of a potentially explosible
dust-air mixture.
Specific hazards arising from the
chemical:
May release formaldehyde when heated to high temperatures in the presence of air.
Formaldehyde is a known skin and lung sensitizer and is regulated as a carcinogen.
Hazardous combustion products:Carbon monoxide (CO). Carbon dioxide (CO2). Formaldehyde.
Protective equipment and
precautions for firefighters:
Wear suitable protective equipment. In the event of fire, wear self-contained breathing
apparatus.
Risk of Dust Explosion: Dust may form explosive mixture in air. See also Section 9.
___________________________________________________________________________________________
Page 3 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions: Avoid dust formation. Remove all sources of ignition. Ensure adequate ventilation. Use
personal protective equipment. See also Section 8.
For emergency responders: Use personal protection recommended in Section 8.
Environmental Precautions:
Environmental Precautions: Contain spilled product on land, if possible. Local authorities should be advised if
significant spillages cannot be contained.
Methods and material for containment and cleaning up
Methods for containment: Prevent further leakage or spillage if safe to do so.
Methods for cleaning up: If the spilled material contains dust or has the potential to create dust, use
explosion-proof vacuums and/or cleaning systems suitable for combustible dusts. Use of
a vacuum with high efficiency particulate air (HEPA) filtration is recommended. Do not
create a dust cloud by using a brush or compressed air. Dry sweeping is not
recommended. Pick up and transfer to properly labelled containers. See Section 13.
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling: Avoid contact with skin and eyes. Avoid dust formation. Do not breathe dust. Provide
appropriate exhaust ventilation at machinery and at places where dust can be generated.
Do not create a dust cloud by using a brush or compressed air. Dust may form explosible
mixture in air.
Take precautionary measures against static discharges. All metal parts of the mixing and
processing equipment must be earthed/grounded. Ensure all equipment is electrically
earthed/grounded before beginning transfer operations. Fine dust is capable of
penetrating electrical equipment and may cause electrical shorts.
Conditions for safe storage, including any incompatibilities
Storage Conditions: Keep containers tightly closed in a dry and well-ventilated place. Do not store together
with volatile chemicals as they may be adsorbed onto product. Store at ambient
conditions. Keep away from heat and sources of ignition. Keep in properly labeled
containers.
Dust deposits should not be allowed to accumulate on surfaces, as these may form an
explosible mixture if they are released in the atmosphere in sufficient concentrations.
Incompatible materials: None known.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure guidelines: There are no exposure limits identified for this product. Exposure limits for components
are stated below.
___________________________________________________________________________________________
Page 4 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
Amorphous Silica, The regulatory
exposure limits are found under the
general silica, CAS RN 7631-86-9:
Australia: 2 mg/m , TWA, Respirable
Austria MAK 4 mg/m , TWA, Inhalable fraction
Finland: 5 mg/m
Germany TRGS 900: 4 mg/m , TWA, Inhalable fraction
India: 10 mg/m , TWA
Ireland: 2.4 mg/m , TWA, Respirable dust
Norway: 1.5 mg/m , TWA, Respirable dust
Switzerland: 4 mg/m , TWA
UK WEL: 6 mg/m , TWA, Inhalable fraction
2.4 mg/m , TWA, Respirable fraction
US OSHA PEL: 6mg/m (54 FR2701)
Dust, or Particulates Not Otherwise
Specified:
Belgium: 10 mg/m , TWA, Inhalable
3 mg/m TWA, Respirable
China: 8 mg/m , TWA
10 mg/m , STEL
France: 10 mg/m , TWA Inhalable dust
5 mg/m , TWA Respirable dust
Italy: 10 mg/m , TWA, Inhalable
3 mg/m , TWA, Respirable
Malaysia: 10 mg/m , TWA, Inhalable
3 mg/m , TWA, Respirable
Spain: 10 mg/m , VLA, Inhalable
3 mg/m , VLA, Respirable
US ACGIH – PNOS: 10 mg/m , TWA, Inhalable
3 mg/m , TWA, Respirable
US OSHA – PEL: 15 mg/m , TWA, Total dust
5 mg/m , TWA, Respirable
NOTE:
In its facilities globally, Cabot Corporation manages silica to the Germany TRGS 900 occupational exposure limit of 4 mg/m ,
TWA, Inhalable fraction
MAK: Maximale Arbeitsplatzkonzentration (Maximum Workplace Concentration)
PEL: Permissible Exposure Limit
PNOS: Particulate Not Otherwise Specified
STEL: Short Term Exposure Limit
TRGS: Technische Regeln f r Gefahrstoffe (Technical Rule for Hazardous Materials)
TWA: Time Weighted Average
US ACGIH: United States American Conference of Governmental Industrial Hygienists
US OSHA: United States Occupational Safety and Health Administration
VLA: Valore L mite Ambientales (Environmental Limit Value)
WEL: Workplace Exposure Limit
Engineering Controls: Ensure adequate ventilation to maintain exposures below occupational limits. Provide
appropriate local exhaust ventilation at machinery and at places where dust can be
___________________________________________________________________________________________
Page 5 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
generated.
Personal protective equipment [PPE]
Respiratory Protection: Approved respirator may be necessary if local exhaust ventilation is not adequate.
Hand Protection: Wear protective gloves to prevent skin drying. Use protective barrier cream before
handling the product. Wash hands and other exposed skin with mild soap and water.
Eye/face Protection: Wear eye/face protection. Wear safety glasses with side shields (or goggles).
Skin and Body Protection: Wear suitable protective clothing. Wash clothing daily. Work clothing should not be
allowed out of the workplace.
Other: Handle in accordance with good industrial hygiene and safety practice. Emergency
eyewash and safety shower should be located nearby.
Environmental exposure controls:In accordance with all local legislation and permit requirements as applicable for dusts.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid Odor: None under normal use. May
exhibit odor at high
temperature.
Appearance: Powder Odor threshold: 0.05 ppm
Color: White
Property Values Remarks Method
pH: No information available
Melting point/freezing point:1700 C NIOSH Pocket Guide to Chemical Hazards
Boiling point / boiling range:2230 C NIOSH Pocket Guide to Chemical Hazards
Evaporation Rate: Not Applicable
Vapor pressure: Not Applicable
Vapor Density: Not Applicable
Density: 2.2-2.3 g/cm3 @ 20 C
Bulk Density: No information available
Specific Gravity at 20 C: 2.2-2.3
Water solubility: Slightly soluble According to OECD 105
Solubility(ies): No information available
Partition Coefficient
(n-octanol/water):
Not Applicable
Decomposition temperature:> 400 C Bulk Powder test- Diffusion cell
Viscosity: Not Applicable
Kinematic viscosity: Not Applicable
Dynamic viscosity: Not Applicable
Oxidizing Properties: No oxidizing properties
Softening point: Not Applicable
VOC content (%): Not Applicable
% Volatile (by Volume): Not Applicable
% Volatile (by Weight): Not Applicable
Surface Tension: Not Applicable
___________________________________________________________________________________________
Page 6 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
End point is listed “not applicable” due to the inherent properties of the substance
“No information available” indicates testing has not been performed
10. STABILITY AND REACTIVITY
Reactivity: Not reactive.
Stability: Stable under recommended handling and storage conditions.
Stable up to >400 C. No exotherm (BulkPowder test – Diffusion cell).
Possibility of hazardous reactions:None under normal processing.
Hazardous polymerization: Hazardous polymerization does not occur.
Conditions to avoid: Do not expose to temperatures above 150 C. Keep away from heat and sources of
ignition. Avoid dust formation.
May release formaldehyde when heated to high temperatures in the presence of air.
Formaldehyde is a known skin and lung sensitizer and is regulated as a carcinogen.
Incompatible materials: None known.
Explosion data See also Section 9.
Sensitivity to Mechanical Impact:None.
Sensitivity to Static Discharge:Dust may form explosible mixture in air. Avoid dust formation. Do not create a dust cloud
by using a brush or compressed air. Take precautionary measures against static
discharges. All metal parts of the mixing and processing equipment must be
Explosive properties: Dust may form explosible mixture in air
Flash Point: Not Applicable
Flammability (solid, gas): No information available
Flammability Limit in Air: No information available
Explosion Limits in Air – Upper (g/m
3
): No information available
Explosion Limits in Air – Lower (g/m
3
): 300450 C ASTM E-2021 Dust layer Neither of the tests conducted at a
temperature of 450 C (the upper limit of the apparatus) met
the criteria for ignition based on temperature rise. For this
reason, the MIT was reported as > 450 C.
Minimum Ignition Energy: >10 J ASTM E2019
Ignition Energy: No information available
Maximum Absolute Explosion Pressure:5.22 bar ASTM E-1226 (20-L Sphere Test)
Maximum Rate of Pressure Rise: 140 bar/secASTM E-1226 (20-L Sphere Test)
Burn Velocity: No information available
Kst Value: 38
bar.meter/second
ASTM E-1226 (20-L Sphere Test)
Dust Explosion Classification: ST1 Weak Explosion ASTM E-1226;
___________________________________________________________________________________________
Page 7 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
earthed/grounded. Ensure all equipment is electrically earthed/grounded before
beginning transfer operations.
Hazardous decomposition products:Carbon monoxide (CO). Carbon dioxide (CO2). Formaldehyde.
11. TOXICOLOGICAL INFORMATION
Information given is based on data obtained from this substance or from similar substances.
Acute toxicity
Oral LD50: LD50/oral/rat = > 5000 mg/kg. No deaths occurred and no signs of toxicity were seen
during the observation periods after single oral administration of the substance. (OECD
423).
Inhalation LC50: Due to the product’s physical characteristics, no suitable testing procedure is available
Dermal LD50: No data are available on the product itself.
Synthetic Amorphous Silica: LD50/dermal/rabbit = > 2000 mg/kg. Very slight transient
erythema in one animal. No signs of systemic or organ toxicity (OECD 402).
Skin corrosion/irritation: Primary irritation index = 0.0 @ 24 hr. Not classified as an irritant (OECD 404)
Serious eye damage/eye irritation:Not classified as an irritant in rabbit studies (OECD 405). High dust concentrations may
cause mechanical irritation.
Sensitization: No experimental animal data are available. No cases of sensitization in humans have been
reported. Contains no known sensitizers. May release formaldehyde when heated to high
temperatures in the presence of air. Formaldehyde is a known skin and lung sensitizer
and is regulated as a carcinogen.
Mutagenicity: Not mutagenic in Ames test. Negative in the chromosome aberration test in Chinese
hamster ovary (CHO) cells.
Carcinogenicity: No data are available on the product itself.
Synthetic Amorphous Silica: No evidence of carcinogenicity was observed in multiple
animal species following repeated oral or inhalation exposure to amorphous silica.
Similarly, epidemiology studies show no evidence of carcinogenicity in workers who
manufacture amorphous silica.
Treated Synthetic Amorphous Silica: No evidence of cancer in rats exposed for 24 months
at 100 mg/kg/d (diet). (ECETOC JACC Report 051 – Synthetic Amorphous Silica, September
2006).
Reproductive and Developmental
Toxicity:
No effects on reproductive organs have been reported in animal toxicity studies. No
developmental effects observed on progeny in dietary study (doses of 0 or 500 mg/kg/d).
(ECETOC JACC Report 051 – Synthetic Amorphous Silica, September 2006).
STOT – single exposure: Specific target organ toxicity is not expected after single oral, single inhalation, or single
dermal exposure.
STOT – repeated exposure: No data are available on the product itself.
Treated Synthetic Amorphous Silica: Repeated dose toxicity: oral (rat) , 5 to 8 weeks, no
___________________________________________________________________________________________
Page 8 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
significant treatment-related adverse effects at doses of up to 2000 mg/kg/d. (ECETOC
JACC Report 051 – Synthetic Amorphous Silica, September 2006).
Synthetic Amorphous Silica: Repeated dose toxicity: oral (rat), 2 weeks to 6 months, no
significant treatment-related adverse effects at doses of up to 8% silica in the diet.
Repeated dose toxicity: inhalation (rat), 13 weeks, Lowest Observed Effect Level (LOEL) =
1.3 mg/m
3
based on mild reversible effects in the lungs.
Repeated dose toxicity: inhalation (rat), 90 days, LOEL = 1 mg/m
3
based on reversible
effects in the lungs and effects in the nasal cavity.
Based on available data, a STOT-RE classification is not warranted.
Aspiration Hazard: Based on industrial experience and available data, no aspiration hazard is expected.
12. ECOLOGICAL INFORMATION
Information given is based on data obtained from this substance or from similar substances.
Aquatic Toxicity: Fish (Brachydanio rerio) LC50 (96 h): > 10,000 mg/l; (Method: OECD 203)
No acute toxicity to Daphnia with EL and EL50 ranging from >1000 to 10,000 mg/L (OECD
202)
ENVIRONMENTAL FATE
Persistence and degradabilityThe methods for determining biodegradability are not applicable to inorganic substances
Bioaccumulation Not expected due to physicochemical properties of the substance.
Mobility: Not expected to migrate.
Distribution to Environmental
Compartments:
No information available.
Other adverse effects: No information available.
13. DISPOSAL CONSIDERATIONS
Disclaimer: Information in this section pertains to the product as shipped in its intended composition as described in Section 3
of this SDS. Contamination or processing may change waste characteristics and requirements. Regulations may also apply to
empty containers, liners or rinsate. State/provincial and local regulations may be different from federal regulations. The person
generating waste must determine its proper classification
RCRA: Unused product is not a hazardous waste under U.S. RCRA, 40 CFR 261.
Unused and Uncontaminated
Product:
Product, as supplied, should be disposed of in accordance with the regulations issued by
the appropriate federal, state and local authorities. Same consideration should be given
to containers and packaging.
___________________________________________________________________________________________
Page 9 / 12
14. TRANSPORT INFORMATION
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
DOT
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
ICAO (air)
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
IATA
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
IMDG
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
RID
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
ADR
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
15. REGULATORY INFORMATION
Hazard Classification
United States – OSHA (29 CFR 1910.1200): Hazardous
Canada – WHMIS Classification (HPR,
SOR/2015-17)
Hazardous. See Section 2 for Hazard Classification.
___________________________________________________________________________________________
Page 10 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
This product has been classified in accordance with the hazard criteria of the Hazardous Products Regulations (HPR) and the
M/SDS contains all the information required by the Hazardous Products Regulations
International Inventories
TSCA – United States Toxic Substances Control Act Section 8(b) InventoryComplies
DSL/NDSL – Canadian Domestic Substances List/Non-Domestic Substances ListComplies
EINECS/ELINCS – European Inventory of Existing Chemical Substances/European List of
Notified Chemical Substances
Complies
ENCS – Japan Existing and New Chemical Substances Complies
IECSC – China Inventory of Existing Chemical Substances Complies
KECL – Korean Existing and Evaluated Chemical Substances Complies
PICCS – Philippines Inventory of Chemicals and Chemical Substances Complies
AICS – Australian Inventory of Chemical Substances Complies
NZIoC – New Zealand Inventory of Chemicals Complies
TCSI – Taiwan Chemical Substance Inventory Complies
US Federal Regulations
TSCA Section 12(b) Export Regulations:
This product does not contain any components that are subject to TSCA 12(b) Export Notification.
SARA Section 302 (40 CFR 355) Extremely Hazardous Substances:
No components are listed as extremely hazardous substances under SARA Section 302.
SARA 311/312 Hazard Categories
See GHS classification in section 2 for applicable SARA 311/312 hazard categories under the revised 40 CFR 370 (June 13, 2016)
SARA Section 313 (40 CFR 372) Toxics Release Inventory
Does not contain any of the substances identified under Section 313 as toxic chemicals in excess of the de minimis
concentrations necessary to be subject to the supplier notification requirements.
Clean Air Act Amendments of 1990
(CAA, Section 112, 40 CFR 82):
This product does not contain any components listed as a Hazardous Air Pollutant, Flammable Substance, Toxic Substance, or
Class 1 or 2 Ozone Depletor
CWA (Clean Water Act)
This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40
CFR 122.42).
CERCLA
This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and
Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level
pertaining to releases of this material.
U.S. State Regulations
California Proposition 65
This product does not contain any Proposition 65 chemicals.
U.S. State Right-to-Know Regulations
___________________________________________________________________________________________
Page 11 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
This product contains a listed component(s) on the Massachusetts Right-to-Know Substances List, New Jersey Right-to-Know
List, Pennsylvania Right-to-Know List:. Silica (CAS# 7631-86-9).
16. OTHER INFORMATION
Pharmaceutical Use:
Not permitted
Food Additive Use:
Not permitted
References:
NIOSH Pocket Guide to Chemical Hazards, September 2005. “Silica, amorphous”. DHHS (NIOSH) Publication No. 2005-149.
National Technical Information Service, Springfield, VA. p. 277
Contacts:
Disclaimer:
The information set forth is based on information that Cabot Corporation believes to be accurate. No warranty, expressed or
implied, is intended. The information is provided solely for your information and consideration and Cabot assumes no legal
responsibility for use or reliance thereon. In the event of a discrepancy between the information on the non-English document
and its English counterpart, the English version shall supersede.
Prepared by: Cabot Corporation – Safety, Health and Environmental Affairs
Revision date: 28-Nov-2019
All names annotated with the or symbol are trademarks of the Cabot Corporation or its affiliates.
End of Safety Data Sheet
Cabot Corporation
700 E U.S. Highway 36
Tuscola, IL 61953-9643
UNITED STATES
Tel:1-217-253-3370
Fax: 1-217-253-5530
Cabot Corporation
157 Concord Road
Billerica, MA 01821
UNITED STATES
Tel: 1-978-663-3455
Fax: 1-978-670-6955
Cabot GmbH
Kronenstrasse 2
79618 Rheinfelden
GERMANY
Tel (+49) 7623.707.0
Fax: (+49) 7623.707.530
Cabot Carbon, Ltd.
Sully Moors Road
Sully, Glamorgan CF64 5RP
Wales, UNITED KINGDOM
Tel: (+44) 1446.736999
Fax: (+44)1446.737123
Cabot Corporation
3603 South Saginaw Road
Midland, MI 48640
UNITED STATES
Tel: 1-989-495-0030
Fax: 1-989-495-2139
Cabot Bluestar Ltd.
Xinghuo Industrial Garden
Yongxiu County, Jiujiang City 330319
Jiangxi Province, CHINA
Tel: (86-792) 3171616
Fax: (86-792) 3170320
___________________________________________________________________________________________
Page 12 / 12
by | Sep 27, 2025
ABOT
SAFETY DATA SHEET
Prepared in accordance with the United Stat s Hazard Commun cation
Standard:29 CFR 1910.1200 (20f2)
Rev sion date : 29-Sep-2016
Product n me:
Product code:
Synonyms:
This SDS is val d for
the following grades
Recommended use:
Restrict ons on use
Supplier:
Cabot Corporation
4400 North Point Parkway
Suite 200
Alpharetta, Georgia 30022
Un ted States
Tel: +1 678 297 1300
Emergency Telephone Number:
CAB-O-SlLG) TS-720 Fumed Silica
T5720
Silicon Dioxide, Synthetic Amorphous Silica, Pyrogenic (Fumed) Amorphous Silica
TS720, TS720D.
Various, Rheological control, Flow agent, Thickening agent, Glossing or matt ng agent,
Reinforcing agent in: Coat ngs, ,4dhesives and/or sealants, lnks, Silicone Elastomer,
Rubber products, Dispersion, Suspension, Cosmetics, Paints, Hygiene and sanitary
products, Other
Not Applicable.
Cabot Corporation
L57 Concord Road
Billerica, MA 01821
UNIT D STAT S
Tel: 1-978-663-3455
Fax: L-978-670-6955
24Hl7d service
Canada: CANUT C 1-613-996-6666
GERMANY: CH EM REC 0800-181-70s9
US: CHEMTR C 1-800-424-9300 or 1-703-527-3887
UK: CH MTREC: (+44)-870-8200418
lnternational CH M R C : + 1. 7 A3-7 4].-5970 or + 1-703-527 -3887
Classification,
OSHA Regulatory Statusl
Combustible dust
This chemical is considered hazardous by the United States 2012 OSHA Hazard
Communication Standard (29 CFR 1910.1200).
Label Elements:
Page I / 12
Product code: TS720 Product name: CAB-O-S|L@ TS-720 Fumed Silica Revision date: 29-Sep-2016
Pictogram:
Signal Word:
Hazard statements:
Precautionary Statements –
Prevention
None
WARNING
May form combustible dust concentrations in air
. Keep away from all ignition sources including heat, sparks and flame
. Prevent dust accumulations to minimize explosion hazard
Hazards not otherwise classif ed {HNOC)
Do not expose to temperatures above 150’C. Hazardous products of combustion can include carbon monoxide, carbon
dioxide and formaldehyde.
Potential health effects
Principle Routes of Exposure: lnhalation, Skin Contact, Eye contact
Eye Contact: May cause mechanical irritation. Avoid contact with eyes.
Skin Contact: May cause mechanical irrit tion and skin drying. Avoid cont ct with skin. No cases of
sensitization in humans have been reported.
lnhalation Dust may be irritating to resp ratory tract. Provide appropriate exhaust ventilation at
machinery and at places where dust can be generated. See also Section 8.
lngestionl Adverse health effects are not expected. See Section 11
Carcinogenicity: Does not conta n any substances greater than 0.1% listed by IARC (lnternational Agency
for Research on Cancer), NTP (National Toxicology Program), OSHA (Occupational Safety
and Health Administration), ACGIH {American Conference for Governmental lndustrial
Hygienists) or EU (European Union). See also Section 11.
Target Organ ffects: Lungs, See Section 11
Medical Conditlons Aggravated by Asthma, Respiratory disorder
Exposure:
Potential Environmental Effects: None known. See Section 12.
Paee 2l t2
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Revis on date: 29-Sep-2016
Synonyms: Siticon Dioxide, Synthetic Amorphous Silica, Pyrogenic (tumedlAmorphous Silica.
Other lnformation:
The hyphen (-) means “not applicable”
Siloxanes and Silicones, di-Me, reaction products
with silica
67762-90-7 100
FIRS AID MEASURES
Skin Contect
Eye cont ct
lnhalation
Wash thoroughly with soap and water. Seek medical attention if symptoms develop.
Flush eyes mmediately with large amounts of water for 15 minutes. Seek medical
attention if symptoms develop,
lf cough, shortness of breath or other breathing problems occur, move to fre’sh air. Seek
medical attention if symptoms persist. lf necessary, restore normal breathing through
standard first aid me sures.
lngestion Do not induce vomiting. lf conscious, 6ive several giasses of water, Never give anything
by mouth to an unconscious person.
Most import nt symptoms and effects, both acute and delaved
Symptoms The most irnportant known symptoms and effects are described in Section 2 and/or in
Section 11.
lndication of any immediate medical attention and special treatment needed
Note to physicians: Treat symptomatically
Suitable Extingu sh ng Media:
Unsuitable Extinguish ng Media
Specific hazards arising from the
chemical:
Hazardous combustion products
Protectiv equipment and
precaut ons for f iref ighters:
Risk of ust xplosionl
Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment. Use foam, carbon dioxide {CO2), dry chemical or water spray
A fog is recommended if water is used.
DO NOT USE high pressure media which could cause formation of a potentially explosible
dust-air m xture.
May release formaldehyde when heated to high temperatures in the presence of air
Formaldehyde is a known skin and lung sensitizer and is regulated as a carcinogen.
Carbon monoxide (CO). Carbon dioxide (COZ). Formaldehyde.
Wear suitable protect ve equipment. ln the event of fire, wear self-contained breathing
apparatus.
Dust may form explosive mixture in air See also Section 9
Page 3 | t2
Product code: T5720 Product name.: CAB-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Personal precautions, protective equipment and emergency procedures
Personal precautions: Avoid dust formation. Remove all sources of ignition. Ensure adequate vent lation. Use
personal protective equ pment. See also Section L
For emergency responders: Use personal protection recommended in Section 8.
Environmental Precautions:
Environmental Precautions: Contain spilled product on land, if possible. Local authorities should be advised if
significant spillages cannot be contained.
Methods and material for containment and cleaning up
Methods for containment:
Methods for cleaning up:
Prevent further leakage or spillage if safe to do so.
lf the spilled material contains dust or has the potential to create dust, use
explosion-proof vacuums and/or clean ng systems suitable for combustible dusts. Use of
a vacuum with high efficiency particulate air (HEPA) filtration is recommended. o not
create a dust cloud by using a brush or compressed air. Dry sweeping is not
recommended. Pick up and transfer to properly labelled containers. See Section 13.
Precautions for rafe handline
Advice on safe handling:
General hygiene considerations: l”landle in accordance with good industrial hygiene and safety practice
Condit ons for s fe stor ge, including any incompatibilities
Storage Cond tions
Avoid contact with skin and eyes. Avoid dust formation. Do not breathe dust. Provide
appropriate exhaust ventilation at machinery and at places where dust can be generated
o not create a dust cloud by using a brush or compressed air. Dust may form explosible
mixture in air.
Take precautionary measures against static discharges. All metal parts of the mixing and
processing equipment must be earthed/grounded. Ensure all equipment is electrically
earthed/grounded before beginning transfer operations. Fine dust is capable of
penetrating electrical equipment and may cause electrical shorts.
Keep containers tightly closed in a dry and well-ventilated place. Do not store together
with volatile chemicals as they may be adsorbed onto product. Store at ambient
conditions. Keep away from heat and sources of ignition. Keep in properly labeled
containers.
Dust deposits should not be allowed to accumulate on surfaces, as these may form an
explosible mixture if they are reieased in the atmosphere in sufficient concentrations.
None known.lncompatible mater als:
There are no exposure limits identified for this product. Exposure limits for componentsExposure guidelines:
Page 4 | t2
Product code: TS720 Product name: CA8-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-5ep-2016
are stated below.
Amorphous Silica, The retulatory Australia:
exposure limits are found under the Austria MAK
tener l silica, CAS RN 7531-86-9: Finland:
Germany TRGS 900:
lndia:
lreland:
Norway:
Switzerland:
UK W L:
US OSHA PEL:
Dust, or Particulates Not otherwise
Specffied:
z mg/mt, TWA, Respirable
4 mgfm?, TWA, lnhalable fraction
5 mg/m3
4mg/m3, TWA, lnhalable fract on
10 rng/m3, TWA
2.4mg/m3, TWA, Respirable dust
1.5 mg/m3, TWA, Respirable dust
4 mg/m3, TWA
6 mg/m}, TWA, lnhalable fraction
2.4 mg/ms, TWA, Respirable fraction
6mg/m3 (54 FR270il
10 mg/m3, TWA, lnhalable
3 mglm3 TWA, Respirable
Belgium:
China: B mg,/m3, TWA
10 mg,/m3, ST L
France: 10 mg/m3, TWA lnhaiable dust
5 mg/m3, TWA Respirable dust
Italy: 10 mg/m3, TWA, lnhalable
3 mg/m3, TWA, Respirable
Malaysia; 10 mg/m3, TWA, lnhalable
3 mg/m3, TWA, Respirable
Spain: 7o mg/m , VLA, tnhalable
3 mg/m3, VLA, Respirable
US ACGIH – PNOS: 10 mg/m , TWA, lnhalable
3 mg/m3, TWA, Respirable
US OSHA – PEL: 15 mg/m3, TWA, Total dust
5 mg/m3, TWA, Respirable
NOT
ln its facil t es globally, Cabot Corporat on manages silica to the Germany TRGS 900 occupational exposure limit of 4 mg/m3,
TWA, lnhalable fraction
MAKi M ximal Arb tsplatzk nz nff tion lMa,(lmum Worhplac concentration)
PEL: Permlsslble lxposure .lmlt
PNOS: Part culate Not Otherwise Specified
STEL: Sh rt Term Exposure Llmit
TRGS: Technische egeln fi r G fahrstoffe (Techn cal Rule for Hazardous Materialsl
IWA: Iime weighted Average
US ACGIH: Unit d St t s Amerlr n Conler nc f Govgrnm nt l lndu tr l Hygt nistg
US OSHA: Unitsd St tss occupatlonel Safety and H alth Admlnistr tion
vLA: v lore L m re Ambi ntales lEnvi onmental L mit valuel
WEL| W rkpl ce Exp sur L mit
Page 5l t2
Product code: TS72O Product name: CAB-O-SII( TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Engineering Controls:
Personal protective equipment IPPEI
Respiratory Protection
Hand Protection:
Ensure adequate ventilation to maintain exposures below occupational limits. Provide
appropriate local exhaust ventilat on at machineryand at places where dustcan be
generated.
Approved respirator may be necess ry if local exhaust ventilat on is not adequate.
Wear protective gloves to prevent skin drying. Use protective barriercream be ore
handling the product. Wash hands and other exposed skin with mild soap and water
Wear eye/face protection. Wear safety glasses with side shields (or goggles).Eye/face Protection:
Skin and Body Protection Wear suitable protect ve clothing. Wash clothing daily. Work clothing should not be
allowed out of the workplace.
Other: Handle in accordance w th good industrial hygiene and safety practice. mergency
eyewash and safety shower should be located nearby.
Environmental exposure controls: ln accordance with all local legislation and permit requirements as appiicable for dusts.
Physical State: Solid Odor None under normal use. May
exhibit odor at high
temperature.
0.05 ppmAppearance:
Color:
Property
pH:
Melting pointfreezi ng poinu
Boiling point,/ boiling range:
vaporation Rate:
Vapor pressure:
Vapor ensity:
Density:
Bulk Densityr
Powder
Wh te
Values
1700’c
2230’C
2.2-2.3 g/cm1
Odor threshold:
Remarks . Method
No information available
NIOSH Pocket Guide to Chemical Hazards
NIOSH Pocket Guide to Chemical Hazards
Not Applicable
Not Applicable
Not Applicable
@20″c
No information available
According to OECD 105
No information available
Not Applicable
Bulk Powder test- Diffusion cell
Not Applicable
Not Applicable
Not Applicable
No oxidizing properties
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Specific Gravity at 20″C:
Water solubility:
Solubility(ies)r
Panition Coefficient
{n-octanol/water):
Decomposition temperature i
Viscosity:
Kinematic viscosity:
Dynarnic viscosity:
Oxidizing Properties:
Soften ng point:
VOC content (%):
% Volatile (by Volume):
% Volatile (by Weight):
2.2-2.3
Slightly soluble
> 400’c
Paee 6 / 12
Product code: TS72O Product name: CAB-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Surface Tension:
Explosive prop rt es:
Flash Pointl
Flammability (solid, gas):
Flammability Limit in Air:
Explosion Lim ts in A r – Upper (g/m3):
Explosion L m ts in Air. Lower (g/m’):
Reactivity:
Stability:
Not Applicable
Dust may form explosible mixture in air
Not Applicable
No information available
No information available
No information available
ASTM E-l515 (MEC – Minimum Explosible Concentration)300 450 ‘C ASTM E-2021; Dust layer. Neither of the tests conducted at a
temperature of 450″C (the upper limit of the apparatus) met
the criteria for ignition based on temperature rise. For this
reason, the MIT was reported as > 450’C.
> = 750 ‘C ASTM E-1491; Dust cloud. Due to the low density of this
product and the volume of the dispersion vessel, testing at a
concentration above 600g/mr were unable to be performed.
For this re lson, the MAIT is reported less than or equal to
750″C. Higher concentrations may produce ignitions below
750″C. {MAIT
– Minimum Auto-lgnition Temperature}
Minimum lgnition Energy: > 1 J ASTM E2 19
lgnhion nergy: No information available
Max mum Absolute Explosion Press rel 5.22 bar ASTM E-1226 (20-LSphere Test)
MaximumRateofPressureRise: 140 bar/sec ASTME-1226{20-LSphereTest}
Burn Velocity: No information available
l(st Value: 38 ASTM E-1226 (20-L Sphere Test)
bar.meter/second
Dust xplosion Classificat onl ST1 Weak Explosion ASTM E-L226;
nd point is listed “not applicable” due to the inherent properties ofthe substance
“No information ava lable” indicates testing has not been performed
Not reactive.
Stable under recommended handling and storage conditions.
Stable up to >400″ C. No exotherm {BulkPowder test – Diffusion cell)
Possibility of hazardous reactions: None under normal processing.
Hazardous polymer rat on: Hazardous polymerization does not occur.
Conditions to avoid: Do not expose to temperatures above 150″C. Keep away from heat and sources of
ignition. Avoid dust formation.
May release formaldehyde when heated to high temperatures in the presence of air
Formaldehyde is a known skin and lung sensitizer and is regulated as a carcinogen.
lncompatible materiats: None known,
Explosion data See also Section 9.
Sensitivity to Mechanical lmpact: None.
Page 7 | t2
Product code: TS720 Product name: CAB-O-SIL( TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Sensitivity to Static ischarge: ust may form explosible mixture in air. Avoid dust formation. Do not create a dust cloud
by using a brush or compressed air. Take precautionary measures aga nst st t c
discharges. ,All metal parts of the mixing and processing equ pment must be
earthed/grounded. nsure all equipment is electrically earthed,/grounded before
beginning transfer operations.
Hazardous decomposition productsr Carbon monoxide (CO). Carbon d oxide (COZ). Formaldehyde
Infarmation given is bosed on data obtained from this substance or from similor substances.
Acute tox city
Oral LD50: LD50/oral/rat
‘
> 5000 mg/kg. No deaths occurred and no signs of toxicity were seen
during the observation periods after single oral administration of the substance. {O CD
423).
lnhalation LC50:
Dermal LDSO:
Skin corrosion/irritation:
Serious eye damage/eye irritation:
Sensitization:
Mutagenic tyr
Carcinogenicity
Reproductive and Developmental
Toxicity:
Due to the product’s physical characteristics, no suitable testing procedure is available
No data are available on the product itself.
Synthetic Amorphous Silica: LDS0/dermal/rabbit =
> 2000 mg/kg. Very slight transient
erythema in one animal. No signs of systemic or organ toxicity ( ECD 402).
Primary irritation index = 0.0 @ 24 hr. Not classified as an irritant (O CD 404)
Not classified as an irritant in rabl it studies (O CD 405). High dust concentr tions may
cause mechanical irritation.
No experimental animal data are available. No cases of sensitization in humans have been
reported. Conta ns no known sensitizers. May release formaldehyde when heated to high
temperatures in the presence of air. Formaldehyde is a known skin and Iung sensitizer
and is regulated as a carcinogen.
Not mutagenic in Ames test. Negative in the chromosome aberration test in Chinese
hamster ovary (CHO) cells.
No data are available on the product itself.
Synthetic Amorphous Silica: No evidence of carcinogenicity was obselved in multiple
animal species following repeated oral or inhalation exposure to amorphous silica.
Similarly, epidemiology studies show no evidence of carcinogenicity in workers who
manufacture amorphous silica.
Treated Synthetic Amorphous Silica: No evidence of cancer in rats exposed for 24 months
at 100 mg/kg/d (diet). (ECETOC JACC Report 05L – Synthetic Amorphous Silica, September
2 06).
No effects on reproductive organs have been reported in animaltoxicity studies. No
developmental effects observed on progeny in d etary study (doses of 0 or 500 rng/kg/d).
( CETOC JACC Report 051 – Synthetic Amorphous Silica, September 2006).
Specific target organ toxicity is not expected after single oral, single inhalation, or single
dermal exposure.
STOT – single exposure:
Page I I t2
Product code: TS720 Product name: CAB-O-SILG) T5-720 Fumed Silica Revision date: 29-Sep-2016
STOT – repeated exposure:
Aspiration Hazard:
No data are avaiiable on the product itself
Treated Synthetic Amorphous Silica: Repeated dose toxicity: oral (rat) , 5 to I weeks, no
significant treatment-related adverse effects at doses of up to 2000 mg/kg/d. ( C TOC
JACC Report 051 – Synthetic Amorphous Silica, September 2006).
Synthetic Amorphous Silica: Repeated dose toxicity: oral {rat}, 2 weeks to 6 months, no
significant treatment-related adverse effects at doses of up to 8% silica in the diet.
Repeated dose toxicity: inhalation (rat), 13 weeks, Lowest Observed ffect Level (LOEL)
=
1.3 mg/m3 based on mild reversible effects in the lungs.
Repeated dose toxicity: inhalation {rat),
90 days, LO L
=
1 mg/mr based on reversible
effects in the lungs and effects in the nasal cavity.
Based on available dat , a STOT-RE classification is not warranted
Based on industrial experience and available data, no aspiration hazard is expected.
lnformation given is based on data obtained from this substance or from s milor substonces.
Aquatic Toxicity:
ENVIRONMENTAL FA E
Persistence and degradab lity
Bioaccumulation
Mobility:
Distribution to nv ronmental
Compartments:
Fish (Brachydanio rerio) LC50 (96 h): > 10,000 mg/l; (Method: OECD 203)
No acute toxicity to Daphnia with L and ELso ranging from >1000 to 10,000 me/L {OECD
2 2)
The rnethods for determining biodegr,adability are not applicable to inorganic substarrces
Not expected due to physicochemicat properties of the substance.
Not expected to migrate.
No information available.
Other adverse effectsl No information available.
Disclaimer: lnformation in this section pertains to the product as shipped in its intended compos tion as descr bed in Section 3
of th s SDS. Contaminat on or processing may change waste characteristics and requirements. Regulations may also apply to
empty containers, liners or rinsate. State/provincial and local regulations may be different from federal regulations. The person
generating waste must determine its proper classification
RCRA: Unused product is not a hazardous waste under U.S. RCRA, 40 CFR 261
Unused and Uncontaminated Product, as supplied, should be disposed of in accordance with the regulations issued by
Productl the appropriate federal. state and local authorities. Same consideration should be given
to containers and packaging.
Page 9 / 12
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Revision date: 29-Sep-2016
DOT
UN/l no
Proper Shipping Name
Hazard Class
Packing group
ICAO (airl
UN/ID no
Proper Sh pping Name
Hazard Class
Packing group
IATA
UN/D no
Proper Shipp ng Name
llarard Class
Packing group
IMDG
UN/ID no
Proper Shipping Name
Hezard Class
Packing group
RID
UN/l no
Proper Sh pping Name
Hazard Class
Packlng group
ADR
UNfl no
Proper Shipping Name
Ha ard Class
Pecklng group
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Hazard dassl cati n
Un ted St t s – OSI{A {29
CFR 1910.1100}: Hazardous
C nada – WHMIS Classification (CPR, SOR/88.66f r Not controlled
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the M/SDS
Page 10/ 12
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Revision date: 29-Sep-2016
contains all the information required by the Controlled Products Regulations
I nternatio n a I I nve ntorles
TSCA – United States Toxic Substances Control Act Section 8(b) lnventory
DSL/NDSL – Canadian Domestic Substances List/Non-Domestic Subst nces List
EINECS/EI|NCS – European lnventory of Existing Chemical Substances/European List of
Notif ied Chem ical Substances
ENCS – Japan Existing and New Chemical Substances
IECSC – China lnventory of Existing Chemical Substances
KECI – Korean xisting and Evaluated Chemical Substances
PICCS – Philippines lnventory of Chemicals and Chemical Substances
AICS – Australian lnventory of Chemical Substances
NZIoC – New Zealand lnventory of Chemicals
TCSI – Taiwan Chemical Substance lnventory
US Federal Regulations
SARA Section 302 (40 cFR 3551 Extremely Ha ardous Substances:
No components are listed as extremely hazardous substances under SARA Section 302.
SARA 311/312Hazard C teEories
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Acute Health Hazard
Chronic He lth Hazard
Fire hazard
Sudden release of pressure hazard
Reactive Hazard
NO
NO
YES
NO
NO
SARA Section 313 [40 CFR 372] Toxics Release lnventory
oes not cont n any of the substances identified under Section 313 as toxic chemicals in excess of the de minimis
concentrations necessary to be subject to the supplier not fication requirements.
Clean Air Act Amendments of 1990
{CAA, Sect on 112,40 CFR 82):
This product does not conta n any components listed as a Hazardous ,Air Pollutant, Flammable Substance, Toxic Substance, or
Class 1 or 2 O one Depletor
CWA (Clean Water Act)
This product does not conta n any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR t22.27 and 40
cFR 122.42).
CERCI-A
This material, as supplied, does not conta n any substances regulated as hazardous substances under the Comprehensive
Environmental Response Compensation and Liability Act (C RCLA) (40 CFR 302) or the Superfund Amendments and
Reauthorization Act {SARA)
(40 CFR 355). There may be specific reporting requirements at the local, regional, or state level
pert n ng to releases of this material.
US State fregulat ons
California Proposition 65
This product does not contain any Proposition 65 chemicals
Page 11 / 12
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-Sep-2016
U,S, Stafe ght-.to-Know Regulations
This product contains a listed component(s) on the Massachusetts R ght-to-Know Substances List, New Jersey Right-to-Know
List, Pennsylvania Right-to-Know List:. Silica {CAS# 7631-86-9).
Pharrnaceutical Use:
Not permitted
References
NIOSH Pocket Guide to Chemical Hazards, September 2005. ”Silica, amorphous”. DHHS {NIOSH} Publication No. 2005-149.
National Technical lnformation Service, Springfield, YA. p.277
Cont cts:
Cabot Corporation
700 E U.S. Highway 36
Tuscola, lL 61953-9643
UNITED STA ES
Tel:1-2 17-253-3370
Fax:’ 7-217-253-5530
Cabot Carbon, Ltd.
Sully Moors Road
Sully, Glamorgan C 64 5RP
Wales, UNITED KINGDOM
Telr {+44) 1446.736999 Fax:
(+441L4/,6.737t23
Cabot Corporation
157 Concord Road
Billerica, MA 01821
UNI ED STATES
Tel: 1-978-663-3455
Fax: 1-978-670-6955
Cabot Corporation
3603 South Saginaw Road
Midland. Ml 48640
UNITED STATES
Telr 1-989-495-0030
Fax: 1-989-495-2139
Cabot GmbH
Kronenstrasse 2
79618 Rheinfelden
G RMANY
Tel (+49) 7623.707.o
Fax: {+49} 7 623.707.530
Cabot Bluestar Ltd.
Xinghuo ndustrial Ga rden
Yongxiu County, Jiujiang City 330319
Jiangxi Province, CHINA
Tel: {86-792) 3171616
Fax: {85-792} 3170320
Disclaimer;
The information set forth is based on information that Cabot Corporation believes to be accurate. No warranty, expressed or
implied, is intended. The information is provided solely for your informat on and consideration and Cabot assumes no legal
responsibility for use or reliance thereon. ln the event of a discrepancy between the information on the non- nglish document
and its English counterpart, the nglish version shall supersede.
Frepared by:
Revision date:
o
and ‘TM’ indicate trademarks of the Cabot Corporation
Cabot Corporation – Safety, Health and nvironmental Affairs
29-Sep-2016
End of Safety D t Sheet
Page L2/ t2
by | Sep 27, 2025
ABOT
SAFETY DATA SHEET
Prepared in accordance with the United Stat s Hazard Commun cation
Standard:29 CFR 1910.1200 (20f2)
Rev sion date : 29-Sep-2016
Product n me:
Product code:
Synonyms:
This SDS is val d for
the following grades
Recommended use:
Restrict ons on use
Supplier:
Cabot Corporation
4400 North Point Parkway
Suite 200
Alpharetta, Georgia 30022
Un ted States
Tel: +1 678 297 1300
Emergency Telephone Number:
CAB-O-SlLG) TS-720 Fumed Silica
T5720
Silicon Dioxide, Synthetic Amorphous Silica, Pyrogenic (Fumed) Amorphous Silica
TS720, TS720D.
Various, Rheological control, Flow agent, Thickening agent, Glossing or matt ng agent,
Reinforcing agent in: Coat ngs, ,4dhesives and/or sealants, lnks, Silicone Elastomer,
Rubber products, Dispersion, Suspension, Cosmetics, Paints, Hygiene and sanitary
products, Other
Not Applicable.
Cabot Corporation
L57 Concord Road
Billerica, MA 01821
UNIT D STAT S
Tel: 1-978-663-3455
Fax: L-978-670-6955
24Hl7d service
Canada: CANUT C 1-613-996-6666
GERMANY: CH EM REC 0800-181-70s9
US: CHEMTR C 1-800-424-9300 or 1-703-527-3887
UK: CH MTREC: (+44)-870-8200418
lnternational CH M R C : + 1. 7 A3-7 4].-5970 or + 1-703-527 -3887
Classification,
OSHA Regulatory Statusl
Combustible dust
This chemical is considered hazardous by the United States 2012 OSHA Hazard
Communication Standard (29 CFR 1910.1200).
Label Elements:
Page I / 12
Product code: TS720 Product name: CAB-O-S|L@ TS-720 Fumed Silica Revision date: 29-Sep-2016
Pictogram:
Signal Word:
Hazard statements:
Precautionary Statements –
Prevention
None
WARNING
May form combustible dust concentrations in air
. Keep away from all ignition sources including heat, sparks and flame
. Prevent dust accumulations to minimize explosion hazard
Hazards not otherwise classif ed {HNOC)
Do not expose to temperatures above 150’C. Hazardous products of combustion can include carbon monoxide, carbon
dioxide and formaldehyde.
Potential health effects
Principle Routes of Exposure: lnhalation, Skin Contact, Eye contact
Eye Contact: May cause mechanical irritation. Avoid contact with eyes.
Skin Contact: May cause mechanical irrit tion and skin drying. Avoid cont ct with skin. No cases of
sensitization in humans have been reported.
lnhalation Dust may be irritating to resp ratory tract. Provide appropriate exhaust ventilation at
machinery and at places where dust can be generated. See also Section 8.
lngestionl Adverse health effects are not expected. See Section 11
Carcinogenicity: Does not conta n any substances greater than 0.1% listed by IARC (lnternational Agency
for Research on Cancer), NTP (National Toxicology Program), OSHA (Occupational Safety
and Health Administration), ACGIH {American Conference for Governmental lndustrial
Hygienists) or EU (European Union). See also Section 11.
Target Organ ffects: Lungs, See Section 11
Medical Conditlons Aggravated by Asthma, Respiratory disorder
Exposure:
Potential Environmental Effects: None known. See Section 12.
Paee 2l t2
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Revis on date: 29-Sep-2016
Synonyms: Siticon Dioxide, Synthetic Amorphous Silica, Pyrogenic (tumedlAmorphous Silica.
Other lnformation:
The hyphen (-) means “not applicable”
Siloxanes and Silicones, di-Me, reaction products
with silica
67762-90-7 100
FIRS AID MEASURES
Skin Contect
Eye cont ct
lnhalation
Wash thoroughly with soap and water. Seek medical attention if symptoms develop.
Flush eyes mmediately with large amounts of water for 15 minutes. Seek medical
attention if symptoms develop,
lf cough, shortness of breath or other breathing problems occur, move to fre’sh air. Seek
medical attention if symptoms persist. lf necessary, restore normal breathing through
standard first aid me sures.
lngestion Do not induce vomiting. lf conscious, 6ive several giasses of water, Never give anything
by mouth to an unconscious person.
Most import nt symptoms and effects, both acute and delaved
Symptoms The most irnportant known symptoms and effects are described in Section 2 and/or in
Section 11.
lndication of any immediate medical attention and special treatment needed
Note to physicians: Treat symptomatically
Suitable Extingu sh ng Media:
Unsuitable Extinguish ng Media
Specific hazards arising from the
chemical:
Hazardous combustion products
Protectiv equipment and
precaut ons for f iref ighters:
Risk of ust xplosionl
Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment. Use foam, carbon dioxide {CO2), dry chemical or water spray
A fog is recommended if water is used.
DO NOT USE high pressure media which could cause formation of a potentially explosible
dust-air m xture.
May release formaldehyde when heated to high temperatures in the presence of air
Formaldehyde is a known skin and lung sensitizer and is regulated as a carcinogen.
Carbon monoxide (CO). Carbon dioxide (COZ). Formaldehyde.
Wear suitable protect ve equipment. ln the event of fire, wear self-contained breathing
apparatus.
Dust may form explosive mixture in air See also Section 9
Page 3 | t2
Product code: T5720 Product name.: CAB-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Personal precautions, protective equipment and emergency procedures
Personal precautions: Avoid dust formation. Remove all sources of ignition. Ensure adequate vent lation. Use
personal protective equ pment. See also Section L
For emergency responders: Use personal protection recommended in Section 8.
Environmental Precautions:
Environmental Precautions: Contain spilled product on land, if possible. Local authorities should be advised if
significant spillages cannot be contained.
Methods and material for containment and cleaning up
Methods for containment:
Methods for cleaning up:
Prevent further leakage or spillage if safe to do so.
lf the spilled material contains dust or has the potential to create dust, use
explosion-proof vacuums and/or clean ng systems suitable for combustible dusts. Use of
a vacuum with high efficiency particulate air (HEPA) filtration is recommended. o not
create a dust cloud by using a brush or compressed air. Dry sweeping is not
recommended. Pick up and transfer to properly labelled containers. See Section 13.
Precautions for rafe handline
Advice on safe handling:
General hygiene considerations: l”landle in accordance with good industrial hygiene and safety practice
Condit ons for s fe stor ge, including any incompatibilities
Storage Cond tions
Avoid contact with skin and eyes. Avoid dust formation. Do not breathe dust. Provide
appropriate exhaust ventilation at machinery and at places where dust can be generated
o not create a dust cloud by using a brush or compressed air. Dust may form explosible
mixture in air.
Take precautionary measures against static discharges. All metal parts of the mixing and
processing equipment must be earthed/grounded. Ensure all equipment is electrically
earthed/grounded before beginning transfer operations. Fine dust is capable of
penetrating electrical equipment and may cause electrical shorts.
Keep containers tightly closed in a dry and well-ventilated place. Do not store together
with volatile chemicals as they may be adsorbed onto product. Store at ambient
conditions. Keep away from heat and sources of ignition. Keep in properly labeled
containers.
Dust deposits should not be allowed to accumulate on surfaces, as these may form an
explosible mixture if they are reieased in the atmosphere in sufficient concentrations.
None known.lncompatible mater als:
There are no exposure limits identified for this product. Exposure limits for componentsExposure guidelines:
Page 4 | t2
Product code: TS720 Product name: CA8-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-5ep-2016
are stated below.
Amorphous Silica, The retulatory Australia:
exposure limits are found under the Austria MAK
tener l silica, CAS RN 7531-86-9: Finland:
Germany TRGS 900:
lndia:
lreland:
Norway:
Switzerland:
UK W L:
US OSHA PEL:
Dust, or Particulates Not otherwise
Specffied:
z mg/mt, TWA, Respirable
4 mgfm?, TWA, lnhalable fraction
5 mg/m3
4mg/m3, TWA, lnhalable fract on
10 rng/m3, TWA
2.4mg/m3, TWA, Respirable dust
1.5 mg/m3, TWA, Respirable dust
4 mg/m3, TWA
6 mg/m}, TWA, lnhalable fraction
2.4 mg/ms, TWA, Respirable fraction
6mg/m3 (54 FR270il
10 mg/m3, TWA, lnhalable
3 mglm3 TWA, Respirable
Belgium:
China: B mg,/m3, TWA
10 mg,/m3, ST L
France: 10 mg/m3, TWA lnhaiable dust
5 mg/m3, TWA Respirable dust
Italy: 10 mg/m3, TWA, lnhalable
3 mg/m3, TWA, Respirable
Malaysia; 10 mg/m3, TWA, lnhalable
3 mg/m3, TWA, Respirable
Spain: 7o mg/m , VLA, tnhalable
3 mg/m3, VLA, Respirable
US ACGIH – PNOS: 10 mg/m , TWA, lnhalable
3 mg/m3, TWA, Respirable
US OSHA – PEL: 15 mg/m3, TWA, Total dust
5 mg/m3, TWA, Respirable
NOT
ln its facil t es globally, Cabot Corporat on manages silica to the Germany TRGS 900 occupational exposure limit of 4 mg/m3,
TWA, lnhalable fraction
MAKi M ximal Arb tsplatzk nz nff tion lMa,(lmum Worhplac concentration)
PEL: Permlsslble lxposure .lmlt
PNOS: Part culate Not Otherwise Specified
STEL: Sh rt Term Exposure Llmit
TRGS: Technische egeln fi r G fahrstoffe (Techn cal Rule for Hazardous Materialsl
IWA: Iime weighted Average
US ACGIH: Unit d St t s Amerlr n Conler nc f Govgrnm nt l lndu tr l Hygt nistg
US OSHA: Unitsd St tss occupatlonel Safety and H alth Admlnistr tion
vLA: v lore L m re Ambi ntales lEnvi onmental L mit valuel
WEL| W rkpl ce Exp sur L mit
Page 5l t2
Product code: TS72O Product name: CAB-O-SII( TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Engineering Controls:
Personal protective equipment IPPEI
Respiratory Protection
Hand Protection:
Ensure adequate ventilation to maintain exposures below occupational limits. Provide
appropriate local exhaust ventilat on at machineryand at places where dustcan be
generated.
Approved respirator may be necess ry if local exhaust ventilat on is not adequate.
Wear protective gloves to prevent skin drying. Use protective barriercream be ore
handling the product. Wash hands and other exposed skin with mild soap and water
Wear eye/face protection. Wear safety glasses with side shields (or goggles).Eye/face Protection:
Skin and Body Protection Wear suitable protect ve clothing. Wash clothing daily. Work clothing should not be
allowed out of the workplace.
Other: Handle in accordance w th good industrial hygiene and safety practice. mergency
eyewash and safety shower should be located nearby.
Environmental exposure controls: ln accordance with all local legislation and permit requirements as appiicable for dusts.
Physical State: Solid Odor None under normal use. May
exhibit odor at high
temperature.
0.05 ppmAppearance:
Color:
Property
pH:
Melting pointfreezi ng poinu
Boiling point,/ boiling range:
vaporation Rate:
Vapor pressure:
Vapor ensity:
Density:
Bulk Densityr
Powder
Wh te
Values
1700’c
2230’C
2.2-2.3 g/cm1
Odor threshold:
Remarks . Method
No information available
NIOSH Pocket Guide to Chemical Hazards
NIOSH Pocket Guide to Chemical Hazards
Not Applicable
Not Applicable
Not Applicable
@20″c
No information available
According to OECD 105
No information available
Not Applicable
Bulk Powder test- Diffusion cell
Not Applicable
Not Applicable
Not Applicable
No oxidizing properties
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Specific Gravity at 20″C:
Water solubility:
Solubility(ies)r
Panition Coefficient
{n-octanol/water):
Decomposition temperature i
Viscosity:
Kinematic viscosity:
Dynarnic viscosity:
Oxidizing Properties:
Soften ng point:
VOC content (%):
% Volatile (by Volume):
% Volatile (by Weight):
2.2-2.3
Slightly soluble
> 400’c
Paee 6 / 12
Product code: TS72O Product name: CAB-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Surface Tension:
Explosive prop rt es:
Flash Pointl
Flammability (solid, gas):
Flammability Limit in Air:
Explosion Lim ts in A r – Upper (g/m3):
Explosion L m ts in Air. Lower (g/m’):
Reactivity:
Stability:
Not Applicable
Dust may form explosible mixture in air
Not Applicable
No information available
No information available
No information available
ASTM E-l515 (MEC – Minimum Explosible Concentration)300 450 ‘C ASTM E-2021; Dust layer. Neither of the tests conducted at a
temperature of 450″C (the upper limit of the apparatus) met
the criteria for ignition based on temperature rise. For this
reason, the MIT was reported as > 450’C.
> = 750 ‘C ASTM E-1491; Dust cloud. Due to the low density of this
product and the volume of the dispersion vessel, testing at a
concentration above 600g/mr were unable to be performed.
For this re lson, the MAIT is reported less than or equal to
750″C. Higher concentrations may produce ignitions below
750″C. {MAIT
– Minimum Auto-lgnition Temperature}
Minimum lgnition Energy: > 1 J ASTM E2 19
lgnhion nergy: No information available
Max mum Absolute Explosion Press rel 5.22 bar ASTM E-1226 (20-LSphere Test)
MaximumRateofPressureRise: 140 bar/sec ASTME-1226{20-LSphereTest}
Burn Velocity: No information available
l(st Value: 38 ASTM E-1226 (20-L Sphere Test)
bar.meter/second
Dust xplosion Classificat onl ST1 Weak Explosion ASTM E-L226;
nd point is listed “not applicable” due to the inherent properties ofthe substance
“No information ava lable” indicates testing has not been performed
Not reactive.
Stable under recommended handling and storage conditions.
Stable up to >400″ C. No exotherm {BulkPowder test – Diffusion cell)
Possibility of hazardous reactions: None under normal processing.
Hazardous polymer rat on: Hazardous polymerization does not occur.
Conditions to avoid: Do not expose to temperatures above 150″C. Keep away from heat and sources of
ignition. Avoid dust formation.
May release formaldehyde when heated to high temperatures in the presence of air
Formaldehyde is a known skin and lung sensitizer and is regulated as a carcinogen.
lncompatible materiats: None known,
Explosion data See also Section 9.
Sensitivity to Mechanical lmpact: None.
Page 7 | t2
Product code: TS720 Product name: CAB-O-SIL( TS-720 Fumed Silica Rev sion date: 29-Sep-2016
Sensitivity to Static ischarge: ust may form explosible mixture in air. Avoid dust formation. Do not create a dust cloud
by using a brush or compressed air. Take precautionary measures aga nst st t c
discharges. ,All metal parts of the mixing and processing equ pment must be
earthed/grounded. nsure all equipment is electrically earthed,/grounded before
beginning transfer operations.
Hazardous decomposition productsr Carbon monoxide (CO). Carbon d oxide (COZ). Formaldehyde
Infarmation given is bosed on data obtained from this substance or from similor substances.
Acute tox city
Oral LD50: LD50/oral/rat
‘
> 5000 mg/kg. No deaths occurred and no signs of toxicity were seen
during the observation periods after single oral administration of the substance. {O CD
423).
lnhalation LC50:
Dermal LDSO:
Skin corrosion/irritation:
Serious eye damage/eye irritation:
Sensitization:
Mutagenic tyr
Carcinogenicity
Reproductive and Developmental
Toxicity:
Due to the product’s physical characteristics, no suitable testing procedure is available
No data are available on the product itself.
Synthetic Amorphous Silica: LDS0/dermal/rabbit =
> 2000 mg/kg. Very slight transient
erythema in one animal. No signs of systemic or organ toxicity ( ECD 402).
Primary irritation index = 0.0 @ 24 hr. Not classified as an irritant (O CD 404)
Not classified as an irritant in rabl it studies (O CD 405). High dust concentr tions may
cause mechanical irritation.
No experimental animal data are available. No cases of sensitization in humans have been
reported. Conta ns no known sensitizers. May release formaldehyde when heated to high
temperatures in the presence of air. Formaldehyde is a known skin and Iung sensitizer
and is regulated as a carcinogen.
Not mutagenic in Ames test. Negative in the chromosome aberration test in Chinese
hamster ovary (CHO) cells.
No data are available on the product itself.
Synthetic Amorphous Silica: No evidence of carcinogenicity was obselved in multiple
animal species following repeated oral or inhalation exposure to amorphous silica.
Similarly, epidemiology studies show no evidence of carcinogenicity in workers who
manufacture amorphous silica.
Treated Synthetic Amorphous Silica: No evidence of cancer in rats exposed for 24 months
at 100 mg/kg/d (diet). (ECETOC JACC Report 05L – Synthetic Amorphous Silica, September
2 06).
No effects on reproductive organs have been reported in animaltoxicity studies. No
developmental effects observed on progeny in d etary study (doses of 0 or 500 rng/kg/d).
( CETOC JACC Report 051 – Synthetic Amorphous Silica, September 2006).
Specific target organ toxicity is not expected after single oral, single inhalation, or single
dermal exposure.
STOT – single exposure:
Page I I t2
Product code: TS720 Product name: CAB-O-SILG) T5-720 Fumed Silica Revision date: 29-Sep-2016
STOT – repeated exposure:
Aspiration Hazard:
No data are avaiiable on the product itself
Treated Synthetic Amorphous Silica: Repeated dose toxicity: oral (rat) , 5 to I weeks, no
significant treatment-related adverse effects at doses of up to 2000 mg/kg/d. ( C TOC
JACC Report 051 – Synthetic Amorphous Silica, September 2006).
Synthetic Amorphous Silica: Repeated dose toxicity: oral {rat}, 2 weeks to 6 months, no
significant treatment-related adverse effects at doses of up to 8% silica in the diet.
Repeated dose toxicity: inhalation (rat), 13 weeks, Lowest Observed ffect Level (LOEL)
=
1.3 mg/m3 based on mild reversible effects in the lungs.
Repeated dose toxicity: inhalation {rat),
90 days, LO L
=
1 mg/mr based on reversible
effects in the lungs and effects in the nasal cavity.
Based on available dat , a STOT-RE classification is not warranted
Based on industrial experience and available data, no aspiration hazard is expected.
lnformation given is based on data obtained from this substance or from s milor substonces.
Aquatic Toxicity:
ENVIRONMENTAL FA E
Persistence and degradab lity
Bioaccumulation
Mobility:
Distribution to nv ronmental
Compartments:
Fish (Brachydanio rerio) LC50 (96 h): > 10,000 mg/l; (Method: OECD 203)
No acute toxicity to Daphnia with L and ELso ranging from >1000 to 10,000 me/L {OECD
2 2)
The rnethods for determining biodegr,adability are not applicable to inorganic substarrces
Not expected due to physicochemicat properties of the substance.
Not expected to migrate.
No information available.
Other adverse effectsl No information available.
Disclaimer: lnformation in this section pertains to the product as shipped in its intended compos tion as descr bed in Section 3
of th s SDS. Contaminat on or processing may change waste characteristics and requirements. Regulations may also apply to
empty containers, liners or rinsate. State/provincial and local regulations may be different from federal regulations. The person
generating waste must determine its proper classification
RCRA: Unused product is not a hazardous waste under U.S. RCRA, 40 CFR 261
Unused and Uncontaminated Product, as supplied, should be disposed of in accordance with the regulations issued by
Productl the appropriate federal. state and local authorities. Same consideration should be given
to containers and packaging.
Page 9 / 12
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Revision date: 29-Sep-2016
DOT
UN/l no
Proper Shipping Name
Hazard Class
Packing group
ICAO (airl
UN/ID no
Proper Sh pping Name
Hazard Class
Packing group
IATA
UN/D no
Proper Shipp ng Name
llarard Class
Packing group
IMDG
UN/ID no
Proper Shipping Name
Hezard Class
Packing group
RID
UN/l no
Proper Sh pping Name
Hazard Class
Packlng group
ADR
UNfl no
Proper Shipping Name
Ha ard Class
Pecklng group
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Not regulated
Hazard dassl cati n
Un ted St t s – OSI{A {29
CFR 1910.1100}: Hazardous
C nada – WHMIS Classification (CPR, SOR/88.66f r Not controlled
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the M/SDS
Page 10/ 12
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Revision date: 29-Sep-2016
contains all the information required by the Controlled Products Regulations
I nternatio n a I I nve ntorles
TSCA – United States Toxic Substances Control Act Section 8(b) lnventory
DSL/NDSL – Canadian Domestic Substances List/Non-Domestic Subst nces List
EINECS/EI|NCS – European lnventory of Existing Chemical Substances/European List of
Notif ied Chem ical Substances
ENCS – Japan Existing and New Chemical Substances
IECSC – China lnventory of Existing Chemical Substances
KECI – Korean xisting and Evaluated Chemical Substances
PICCS – Philippines lnventory of Chemicals and Chemical Substances
AICS – Australian lnventory of Chemical Substances
NZIoC – New Zealand lnventory of Chemicals
TCSI – Taiwan Chemical Substance lnventory
US Federal Regulations
SARA Section 302 (40 cFR 3551 Extremely Ha ardous Substances:
No components are listed as extremely hazardous substances under SARA Section 302.
SARA 311/312Hazard C teEories
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Complies
Acute Health Hazard
Chronic He lth Hazard
Fire hazard
Sudden release of pressure hazard
Reactive Hazard
NO
NO
YES
NO
NO
SARA Section 313 [40 CFR 372] Toxics Release lnventory
oes not cont n any of the substances identified under Section 313 as toxic chemicals in excess of the de minimis
concentrations necessary to be subject to the supplier not fication requirements.
Clean Air Act Amendments of 1990
{CAA, Sect on 112,40 CFR 82):
This product does not conta n any components listed as a Hazardous ,Air Pollutant, Flammable Substance, Toxic Substance, or
Class 1 or 2 O one Depletor
CWA (Clean Water Act)
This product does not conta n any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR t22.27 and 40
cFR 122.42).
CERCI-A
This material, as supplied, does not conta n any substances regulated as hazardous substances under the Comprehensive
Environmental Response Compensation and Liability Act (C RCLA) (40 CFR 302) or the Superfund Amendments and
Reauthorization Act {SARA)
(40 CFR 355). There may be specific reporting requirements at the local, regional, or state level
pert n ng to releases of this material.
US State fregulat ons
California Proposition 65
This product does not contain any Proposition 65 chemicals
Page 11 / 12
Product code: TS720 Product name: CAB-O-SIL@ TS-720 Fumed Silica Rev sion date: 29-Sep-2016
U,S, Stafe ght-.to-Know Regulations
This product contains a listed component(s) on the Massachusetts R ght-to-Know Substances List, New Jersey Right-to-Know
List, Pennsylvania Right-to-Know List:. Silica {CAS# 7631-86-9).
Pharrnaceutical Use:
Not permitted
References
NIOSH Pocket Guide to Chemical Hazards, September 2005. ”Silica, amorphous”. DHHS {NIOSH} Publication No. 2005-149.
National Technical lnformation Service, Springfield, YA. p.277
Cont cts:
Cabot Corporation
700 E U.S. Highway 36
Tuscola, lL 61953-9643
UNITED STA ES
Tel:1-2 17-253-3370
Fax:’ 7-217-253-5530
Cabot Carbon, Ltd.
Sully Moors Road
Sully, Glamorgan C 64 5RP
Wales, UNITED KINGDOM
Telr {+44) 1446.736999 Fax:
(+441L4/,6.737t23
Cabot Corporation
157 Concord Road
Billerica, MA 01821
UNI ED STATES
Tel: 1-978-663-3455
Fax: 1-978-670-6955
Cabot Corporation
3603 South Saginaw Road
Midland. Ml 48640
UNITED STATES
Telr 1-989-495-0030
Fax: 1-989-495-2139
Cabot GmbH
Kronenstrasse 2
79618 Rheinfelden
G RMANY
Tel (+49) 7623.707.o
Fax: {+49} 7 623.707.530
Cabot Bluestar Ltd.
Xinghuo ndustrial Ga rden
Yongxiu County, Jiujiang City 330319
Jiangxi Province, CHINA
Tel: {86-792) 3171616
Fax: {85-792} 3170320
Disclaimer;
The information set forth is based on information that Cabot Corporation believes to be accurate. No warranty, expressed or
implied, is intended. The information is provided solely for your informat on and consideration and Cabot assumes no legal
responsibility for use or reliance thereon. ln the event of a discrepancy between the information on the non- nglish document
and its English counterpart, the nglish version shall supersede.
Frepared by:
Revision date:
o
and ‘TM’ indicate trademarks of the Cabot Corporation
Cabot Corporation – Safety, Health and nvironmental Affairs
29-Sep-2016
End of Safety D t Sheet
Page L2/ t2
by | Sep 27, 2025
Safety Data Sheet
In compliance with 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
p 1 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
Revision Date: May 20, 2025
SECTION 1. IDENTIFICATION
1.1 Product identifier:
Aquatal 303
Aquatal 303 Compacted
Beaverwhite 325
Cimpact 699
EZ Flow 40
EZ Flow MT
Grade 25 Y
Grade 25 YG
Heliocote MT
Heliocote MT Compacted
HAR-002
HON-MT
JetFil M200
JetFil M300
JetFil M353/JetFil M353C
JetFil M400/JetFil M400C
JetFil M450/JetFil M450C
JetFil M500/JetFil M500C
JetFil M550
JetFil M600/JetFil M600C
JetFil M700/JetFil M700C
JetFil M700DT2
Mistrofil CP3 Compacted
Mistrofil CP5 Compacted
Mistrofil MT Compacted
MistrOliva M10DT2
MistrOliva TF
Mistron 002
Mistron 003 Ca
Mistron 100
Mistron 100 Compacted
Mistron 100DT2
Mistron 102 Compacted
Mistron 105 Compacted
Mistron 201
Mistron 303
Mistron 353
Mistron 400C
Mistron 600C
Mistron 403
Mistron 403 Ca
Mistron 403DT2
Mistron 554
Mistron 604
Mistron AB
Mistron CF5A-M
Mistron EG
Mistron FC 002
Mistron Frost
Mistron HYPERPLATE D
Mistron Monomix
Mistron Monomix PCB
Mistron Monomix TS-M
Mistron PCR
Mistron PCR DT2
Mistron RCS
Mistron RCS AC
Mistron RCS C
Mistron Superfrost
Mistron Ultramix
Mistron Vapor
Mistron Vapor 6
Mistron Vapor Compacted
Mistron Vapor R
Mistron Vapor R Compacted
Mistron Vapor R Densified
Mistron Vapor RE
Mistron Vapor RE Compacted
Mistron Vapor Ultra
Nicron 002
Nicron 302
Nicron 303
Nicron 353
Nicron 402
Nicron 403
Nicron 503
Nicron 504
Nicron 554
Nicron 604
Nicron 660
Nicron 665
Nicron 674
Nicron 674C (Compacted)
Nicron 674DT
Nicron 674DT2
Silverline 000
Silverline 001
Silverline 002
Silverline 202
Silverline 002E
Silverline 202 GE
Silverline 303
Silverline 403
Silverline 403 Compacted
Silverline 503DT
Silverline 504
Silverline 604
Steasilk 5YM
Steasilk YC Compacted
Steawhite 2
Steawhite TS60
Yellowstone
Yellowstone AC
Yellowstone C
Yellowstone Ca
1.2 Synonyms: Talc, steatite, soapstone, hydrous magnesium silicate
1.3 Identified uses: Functional mineral for use in paper, paints, ceramics, plastics, etc.
Safety Data Sheet
p 2 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
1.4 Supplier:
Company name: Magris Talc USA, Inc.
Address: Montana Mills
767 Old Yellowstone Trail
Three Forks, MT 59752
USA
Tel: +1 406-285-5300
Fax: +1 406-285-3323
E-mail: regulatory@magristalc.com
Website: www.magristalc.com
1.5 Emergency telephone number:
Emergency phone number: +1 303-623-5716
Available outside office hours: Yes
SECTION 2. HAZARD IDENTIFICATION
2.1 GHS Classification: No classification
2.2 Label elements:
GHS Pictogram None
Signal word None
Hazard statement None
Precautionary statements None
Repeated and prolonged exposure to large amounts of talc dust can cause lung injury (pneumoconiosis).
Risk of injury is dependent on the duration and level of exposure.
SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS
The above-mentioned products are a natural association of talc, chlorite, magnesite and dolomite.
The specific percentages of composition of the ingredients are being withheld as a trade secret.
SECTION 4. FIRST-AID MEASURES
Description of first aid measures:
Inhalation: Remove to fresh air.
Ingestion: Drink plenty of water. Never give liquid to an unconscious person.
Eye contact: Immediately rinse with water for several minutes.
Skin contact: Wash skin thoroughly with soap and water.
Main constituents CAS Number EC Number Amount (%) Classification
Talc (hydrous magnesium silicate) 14807-96-6 238-877-9 > 96 No
Chlorite 1318-59-8 215-285-9 < 2 No
Dolomite 16389-88-1 240-440-2 < 2 No
Magnesite 546-93-0 208-915-9 < 2 No
Safety Data Sheet
p 3 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
SECTION 5. FIRE-FIGHTING MEASURES
5.1 Extinguishing media: All extinguishing media can be used.
5.2 Special hazards arising from the substance or mixture: The product is not flammable, combustible or
explosive. No hazardous thermal decomposition.
5.3 Advice for fire-fighters: No specific fire-fighting protection is required. Use an extinguishing agent
suitable for the surrounding fire.
SECTION 6. ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures: Use proper respiratory and
personal protective equipment. MSHA/NIOSH or OSHA/NIOSH approved respirator recommended.
Spilled materials may cause slippery conditions when wet. Care should be exercised when walking on
spills on floor or concrete pads.
6.2 Methods and material for containment and cleaning up: Dry product should be cleaned with a shovel
or vacuum cleaner while wearing the personal protective equipment described above. Do not discharge
into drains, watercourses or onto the ground. Washing the floor with water is not recommended since it
may cause the floor to become slippery. However, if talc is already wet, and only in this case, the floor
should be thoroughly flushed with water to remove all slipperiness.
SECTION 7. HANDLING AND STORAGE
7.1 Precautions for safe handing: Minimize dust generation and accumulation. If excessive dust is
generated, provide adequate ventilation and use proper respiratory and personal protective equipment.
7.2 Conditions for safe storage: Keep the product dry and in closed containers. Store it in a cool and
well-ventilated space.
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
8.1 Control parameters: Follow workplace regulatory exposure limits for all types of airborne dust (e.g.
total dust, respirable dust, and respirable crystalline silica dust). In the U.S., the ACGIH OEL (Occupational
Exposure Limit) for talc containing no asbestos fibers and less than 1% crystalline silica is 2 mg/m3
respirable fraction measured as an 8-hour TWA (Time Weighted Average). The OSHA exposure limit for
talc is 20 mppcf Permissible Exposure Limit (PEL) TWA. For the equivalent limits in other countries, please
consult a competent occupational hygienist or the local regulatory authority.
8.2 Appropriate engineering controls: Use exhaust ventilation, if required, to maintain dust concentration
below recommended exposure limits.
8.3 Personal protection measures:
(a) Eye protection: Wear side shield safety glasses.
(b) Hand protection: Rubber gloves are recommended for prolonged exposure.
(c) Respiratory protection: If a respirator is required, use of a MSHA/NIOSH or OSHA/NIOSH
approved respirator is recommended.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
9.1 Appearance: White or off white to light grey
9.2 Odor: Odorless
Safety Data Sheet
p 4 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
9.3 pH: 9 9.5 (suspension of 10% talc in water)
9.4 Melting point: >1300 C
9.5 Flammability (solid, gas): Not flammable
9.6 Upper/lower flammability or explosive limits: Not explosive. Limits do not apply.
9.7 Relative density: 2.58 2.83 g/cm
3
9.8 Solubility (ies):
Solubility in water: Negligible
Solubility in hydrofluoric acid: Yes
9.9 Decomposition temperature: >1000 C
9.10 Explosive properties: Not explosive
9.11 Oxidizing properties: Non-oxidizing
SECTION 10. STABILITY AND REACTIVITY
10.1 Reactivity: Inert, not reactive
10.2 Chemical stability: Chemically stable
10.3 Possibility of hazardous reactions: No hazardous reaction
10.4 Conditions to avoid: None
10.5 Incompatible materials: None known
10.6 Hazardous decomposition products: None
SECTION 11. TOXICOLOGICAL INFORMATION
Carcinogenic Status:
IARC: In 2006, IARC concluded that inhaled talc not containing asbestos or asbestiform fibers is not
classifiable as a human carcinogen (Group 3). IARC ruled that there is limited evidence that the use of
talc-based body powder for perineal dusting is a possible risk factor for ovarian cancer (Group 2B).
This is not a route of exposure relevant to workers and applies only to one specific use of talc.
OSHA: Not listed
ACGIH: A4 not classified as a human carcinogen
WHMIS 2015 Classification: Specific Target Organ Toxicity Repeated Exposure Category 1 (STOT
RE1)
NTP: Not listed
SECTION 12. ECOLOGICAL INFORMATION
12.1 Aquatic Toxicity: No known effects
12.2 Persistence and degradability: This product is an inorganic substance and therefore is not
considered biodegradable.
12.3 Bioaccumulative potential: Not relevant
12.4 Mobility in soil: Negligible
Safety Data Sheet
p 5 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
12.5 Other adverse effects: No specific adverse effects known
SECTION 13. DISPOSAL CONSIDERATIONS
13.1 Waste disposal information: Talc is not considered a hazardous waste as defined by the US EPA
RCRA (40 CFR 261) regulations. Observe all applicable federal, state and local regulations when
handling, storing or disposing of this substance.
13.2 Disposal of packaging: Where possible, recycling is preferable to disposal. Recycling and disposal
of packaging should be carried out by an authorized waste management company in compliance with
local regulations. Responsibility for proper waste disposal lies with the owner of the waste.
SECTION 14. TRANSPORT INFORMATION
14.1 US Department of Transportation (DOT): No classification assigned
14.2 Canadian Transportation of Dangerous Goods: No classification assigned
14.3 Land Transport ADR/RID: No classification assigned
14.4 Air Transport IATA/ICAO: No classification assigned
14.5 Maritime Transport IMDG: No classification assigned
14.6 Harmonized Tariff Code: Talc crushed or powdered. 2526.20.00 (stat suffix 00). Talc –
compacted. 6815.99.20 (stat suffix 00).
14.7 EPA TSCA 12(B) Export Notification: Not listed
SECTION 15. REGULATORY INFORMATION
15.1 International regulations:
Industrial Safety and Health Law: This product does not contain harmful or controlled hazardous
substances under ISHL. It contains <1% crystalline silica.
Toxic Chemical Control Act: This product does not contain chemical substances regulated as toxic,
observational, restricted or banned under TCCA.
Dangerous Substance Management Law: This product does not contain chemical substances
regulated under DSML.
Waste Management Law: Dispose of this product in accordance with the waste treatment
standards prescribed in Waste Management Law.
15.2 Other regulations based on domestic or foreign laws: The following inventories have been
investigated as to the publicly available portion of the lists:
MINERAL CAS No.
EINECS
(EU)
AIIC
(Australia)
CEPA
(DSL/NDSL)
(Canada)
KECI
Korean Gazette No.
(Korea)
ENCS/ISHL
(Japan)
Talc 14807-96-6 238-877-9 Yes Yes (DSL) KE-32773 (1)-468
MINERAL
IECSC
(China)
PICCS
(Philippines)
TSCA
(USA)
Swiss ID No.
(Switzerland)
NZIoC
(New Zealand)
CSNN
(Taiwan)
Safety Data Sheet
p 6 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
Talc Yes Yes Yes G-6939 Yes Yes
Regarding regulatory inventories, talc is considered to be a "naturally occurring substance with variable
composition". Talc ore contains variable amounts of associated minerals, such as magnesite, dolomite, and chlorite.
In the interest of full disclosure, we list these associated minerals on our SDSs, however from a regulatory
perspective, the product supplied is considered to be "talc" (CAS # 14807-96-6). Specifically, according to the Toxic
Substances Control Act (TSCA), talc meets the definition of a Naturally Occurring Substance , with unknown or
variable composition, complex reaction product or biological material (UVCB Substance).
15.3 Chemical safety assessment: Exempted from REACH registration in accordance with Annex V.7
15.4 Other pertinent classifications/regulations:
California Safe Drinking Water and Toxic Enforcement Act (California PROP 65) Status:
CALIFORNIA REQUIRED STATEMENT
WARNING: Talc is not listed, however the product supplied can expose you to chemicals
including crystalline silica (airborne particles of respirable size) which has been identified by
the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov .
State Right-To-Know: Talc is listed in Illinois, Massachusetts, New Jersey, Pennsylvania and Florida.
Clean Air Act Ozone depleting chemicals (ODC): None
CONEG Approved Packaging: Yes
National Fire Protection Association (NFPA) Ratings (0-4 scale):
Health = 0
Fire = 0
Reactivity = 0
National Paint and Coating Association (NPCA) Hazardous Material Identification System (HMIS)
Health: 1* (chronic potential)
Flammability: 0
Physical: 0
Personal protection: dust respirator, safety glasses or goggles, gloves
SECTION 16. OTHER INFORMATION
16.1 Date of last revision: May 20, 2025
Revision comments: Added Mistron Monomix PCB
Date of previous revision: December 4, 2024
16.2 References and sources:
1. Baan, R, Straif K, Secretan B, Ghissassi FE and Cogliano V. (2006), On behalf of the WHO
International Agency for Research on cancer Monograph Working Group. Carcinogenicity of
carbon black, titanium dioxide and talc. The Lancet Oncology. 7:295-296.
2. Wild, P.; Lung cancer risk and talc not containing asbestiform fibers: a review of the
epidemiological evidence . Occup. Environ. Med. 2006; 63, 4-9.
3. Cohrssen, B. and Powell C.H. (2001). Talc. In Patty s Toxicology, 5th ed., Bingham, E., Cohrssen, B.,
and Powell, C.H., eds., John Wiley & Sons, Inc. NY. pp. 519-538.
4. IARC Monographs on the Evaluation of Carcinogenic Risks to Humans Volume 93 (2010)
Carbon Black, Titanium Dioxide, and Talc.
Safety Data Sheet
p 7 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
5. Wild, P. and coll; Effects of talc dust on respiratory health: results of a longitudinal survey of 378
French and Austrian talc workers , Occup. Environ. Med. 2008; 65, 261-267.
6. USEPA 1992. Health Assessment Document for Talc, Environmental Criteria and Assessment
Office, Office of Health and Environmental Assessment, U.S. Environmental Protection Agency,
Research Triangle Park, NC. EPA 600/8-91/217, March 1992.
7. P. Leophonte and coll. La pathologie respiratoire chronique des travailleurs du talc , Rev. Fr. Mal.
Resp., 1980, 8, 43-45
8. S. Endo-Capron and coll. In vitro response of rat pleural mesothelial cells to talc samples in
genotoxicity assays (sister chromatid exchanges and DNA repair) Toxic in vitro, 1993, 7, 7-14.
9. P. Wild, M. Refregier, G. Auburtin, B. Carton, JJ. Moulin Survey of the respiratory health of the
workers of a talc producing factory , Occup. Environ. Med. 1995, 52, 470-477.
10. P. Wild and coll. A cohort mortality and nested case-control study of French and Austrian talc
workers Occup. Environ. Med 2002, 59, 98-105.
11. M. Coggiola and coll. An Update of a Mortality Study of Talc Miners and Millers in Italy , Am. J
Indust. Med. 2003, 44, 63-69
Notice to reader:
This safety data sheet complements the technical data sheets but does not replace them. The information
it contains is based on our present knowledge of the product on the date indicated. It is given in good
faith. Users should be warned about the risks associated with using the product for a different purpose
than that for which it was developed, and particularly for uses for which we are not qualified to give
advice.
These regulatory prescriptions are provided with a view to helping users meet their obligations when
using this product. This list should not be considered exhaustive and does not exempt users from ensuring
that they are not required to comply with any further prescriptions other than those mentioned above
concerning product possession and handling for which they are solely responsible.
Only the original English version is authoritative.
by | Sep 27, 2025
Version: 1.7
Revision Date: 01/19/2024
Product name: AEROSIL 200
1/11
000005044737 US 2025-01-10 00000000000005210637
SAFETY DATA SHEET
Classified in accordance with 29 CFR 1910.1200
1. Identification
Product identifier: AEROSIL 200
Other means of identification
CAS Number: 112945-52-5, 7631-86-9
Recommended restrictions
Recommended use: Sealant Coloured printing inks Paints and varnishes. Adhesive Silicone rubber
Cosmetic ingredient Cosmetics Agrochemicals Antiblocking agents Anticaking agent Coating agent
Dispersant Flow-promoting agent. Reinforcing agent. Carrier
Restrictions on use: Not determined.
Manufacturer/Importer/Distributor Information
Company Name : Evonik Corporation
2 Turner Place
Piscataway, NJ 08854
USA
Telephone : +1 732 981 5000
E-mail : product-regulatory-services@evonik.com
Emergency telephone number:
24-Hour Health
Emergency
: +1 800 424 9300 (CHEMTREC – US & CANADA)
800 681 9531 (CHEMTREC MEXICO)
+1 703 527 3887 (CHEMTREC WORLD)
2. Hazard(s) identification
Hazard Classification
Not classified
Label Elements
Hazard Symbol: No symbol
Signal Word: No signal word.
Hazard Statement: Not applicable
Precautionary
Statements
Hazard(s) not otherwise
classified (HNOC):
None.
Version: 1.7
Revision Date: 01/19/2024
Product name: AEROSIL 200
2/11
000005044737 US 2025-01-10 00000000000005210637
3. Composition/information on ingredients
Substances
Chemical Identity
Common
name and
synonyms
CAS number
Content in percent
(%)*
Silicon dioxide, chemically prepared
(CAS 112945-52-5 resp. 7631-86-9)
112945-52-5
100%
* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
Composition Comments: The components are not hazardous or are below required
disclosure limits.
The exact concentration has been withheld as a trade secret.
4. First-aid measures
Description of first aid measures
Inhalation: In case product dust is released: Possible discomfort:
cough, sneezing Move to fresh air.
Skin Contact: Wash off with plenty of water and soap.
Eye contact: In case of contact, immediately flush eyes with plenty of
water for at least 15 minutes or until all material has been
removed. Obtain medical attention. No information available.
Ingestion: Clean mouth with water and drink afterwards plenty of water.
After absorbing large amounts of substance / In case of
discomfort: Supply with medical care.
Personal Protection for First-aid
Responders:
No data available.
Most important symptoms and effects, both acute and delayed
Symptoms: None known.
Hazards: No data available.
Indication of immediate medical attention and special treatment needed
Treatment: No hazards which require special first aid measures.
5. Fire-fighting measures
Suitable (and unsuitable) extinguishing media
Suitable extinguishing media: Water spray, foam, CO2, dry powder. Adapt fire-
extinguishing measures to surroundings
Version: 1.7
Revision Date: 01/19/2024
Product name: AEROSIL 200
3/11
000005044737 US 2025-01-10 00000000000005210637
Unsuitable extinguishing media: Do not use full-force water jet in order to avoid dispersal and
spread of the fire.
Special hazards arising from the
substance or mixture:
None known.
Special protective equipment and precautions for firefighters
Special fire fighting procedures: As in any fire, wear self-contained positive-pressure
breathing apparatus, (MSHA/NIOSH approved or
equivalent) and full protective gear.
Special protective equipment for fire-
fighters:
In the event of fire, wear self-contained breathing apparatus.
6. Accidental release measures
Personal precautions, protective
equipment and emergency procedures:
Use personal protective equipment.
Accidental release measures: No data available.
Methods and material for containment
and cleaning up:
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
Environmental Precautions: Obey relevant local, state, provincial and federal laws and
regulations. Do not contaminate any lakes, streams, ponds,
groundwater or soil. Do not allow entrance in sewage water,
soil stretches of water, groundwater, drainage systems.
7. Handling and storage
Handling
Technical measures: No data available.
Local/Total ventilation: No data available.
Safe handling advice: Use with adequate ventilation.Handle in accordance with
good industrial hygiene and safety practice. If there is the
possibility of skin/eye contact, the indicated hand/eye/body
protection should be used. If the workplace threshold limit
value is exceeded and/or the substance is released, use
appropriate respiratory protection.
Contact avoidance measures: No data available.
Storage
Safe storage conditions: Take precautionary measures against static
discharges.Keep containers tightly sealed and store in a dry,
cool place
Safe packaging materials: No data available.
Version: 1.7
Revision Date: 01/19/2024
Product name: AEROSIL 200
4/11
000005044737 US 2025-01-10 00000000000005210637
8. Exposure controls/personal protection
Control Parameters
Occupational Exposure Limits
Chemical Identity Type Exposure Limit Values Source
Silicon dioxide, chemically
prepared (CAS 112945-52-5
resp. 7631-86-9)
PEL 6 mg/m3
PEL 20 millions
of particles
per cubic
foot of air
Please refer to the latest edition of the appropriate source text and consult an industrial hygienist or similar
professional, or local agencies, for further information.
Biological Limit Values
No biological exposure limits noted for the ingredient(s).
Appropriate Engineering Controls No data available.
Individual protection measures, such as personal protective equipment
Eye/face protection: Wear safety glasses with side shields. In case dusts are
formed, wear close fitting protective goggles.
Skin Protection
Hand Protection: Additional Information: Use impermeable gloves.
Skin and Body Protection: Safety showers and eye showers should be easily
accessible. In order to determine further specifications
applicable to the personal protection equipment, a hazard
assessment according to the OSHA standards (29 CFR
1910.132) for personal protection equipment (PPE) is
recommended before the product is used.
Respiratory Protection: A respiratory protection program that meets OSHA 1910.134
and ANSI Z88.2 or applicable federal/provincial
requirements must be followed whenever workplace
conditions warrant respirator use. NIOSH’s “Respirator
Decision Logic” may be useful in determining the suitability
of various types of respirators.
Hygiene measures: When using, do not eat, drink or smoke. Wash face and/or
hands before break and end of work. To ensure ideal skin
protection: use super fatted soaps and skin cream for skin
care. Wash contaminated clothing before reuse.
Version: 1.7
Revision Date: 01/19/2024
Product name: AEROSIL 200
5/11
000005044737 US 2025-01-10 00000000000005210637
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance
Physical state: solid
Form: Powder
Color: White
Odor: Odorless
Odor Threshold: Not applicable
Melting Point: Approximate
3,092 F/ 1,700 C
Boiling Point: No data available.
Flammability: Not applicable
Upper/lower limit on flammability or explosive limits
Explosive limit – upper: Not applicable
Explosive limit – lower: Not applicable
Flash Point: Not applicable (solid)
Auto-ignition temperature: Not applicable
Decomposition Temperature: > 3,632 F/> 2,000 C
pH: 3.7 – 4.5 at 68 F/20 C
Concentration: 40 g/l
Suspension
Viscosity
Dynamic viscosity: Not applicable (solid)
Kinematic viscosity: Not applicable (solid)
Flow Time: No data available.
Solubility(ies)
Solubility in Water: >
1 mg/l
Solubility (other): No data available.
Partition coefficient (n-octanol/water): Not applicable
Vapor pressure: Not applicable
Relative density: No data available.
Density: Approximate
2.2 g/cm3 at 68 F/20 C
Bulk density: No data available.
Vapor density (air=1): Not applicable
Other information
Explosive properties: Not to be expected in view of the structure
Oxidizing properties: Not to be expected in view of the structure
Self-ignition: Not applicable
Peroxides: Not applicable
Version: 1.7
Revision Date: 01/19/2024
Product name: AEROSIL 200
6/11
000005044737 US 2025-01-10 00000000000005210637
Dust explosion properties: Not dust explosive
Evaporation Rate: Not applicable
Minimum ignition energy: Not applicable
10. Stability and reactivity
Reactivity: No dangerous reaction known under conditions of normal
use.
Chemical Stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: No hazardous reactions are known if properly handled
and stored.
Conditions to avoid: No dangerous reaction known under conditions of normal
use. Operations that create dust.
Incompatible Materials: None known.
Hazardous Decomposition
Products:
None known.
11. Toxicological information
Information on likely routes of exposure
Inhalation: Information on effects are given below.
Skin Contact: Information on effects are given below.
Eye contact: Information on effects are given below.
Ingestion: Information on effects are given below.
Acute toxicity (list all possible routes of exposure)
Oral
Product: LD 50, Rat, Female, Male, > 5,000 mg/kg, OECD 401, Based on
available data, the classification criteria are not met.
Dermal
Product: LD 50, Rabbit, > 5,000 mg/kg, Based on available data, the classification
criteria are not met.
Inhalation
Product: LC 50, Rat, Female, Male, 4 h, > 5.01 mg/l, OECD 436, Dust and mist,
Based on available data, the classification criteria are not met.
Repeated dose toxicity
Product: NOAEL Rat, Male, Oral, 28 day, 7 days a week, >= 1,000 mg/kg, No
negative effects.
Skin Corrosion/Irritation
Product: OECD 404, (Rabbit), Not irritating, Based on available data, the
classification criteria are not met.
Serious Eye Damage/Eye Irritation
Product: analogous OECD method, Rabbit, Not irritating, Based on available data,
the classification criteria are not met.
Version: 1.7
Revision Date: 01/19/2024
Product name: AEROSIL 200
7/11
000005044737 US 2025-01-10 00000000000005210637
Respiratory or Skin Sensitization
Product: Local Lymph Node Assay (LLNA), OECD 429, Mouse, Not a skin
sensitizer.
Maximization Test, OECD 406, Guinea Pig, Not a skin sensitizer.
Carcinogenicity
Product: No evidence that cancer may be caused. Contains no carcinogenic
substances as defined by NTP, IARC and/or OSHA.
IARC Monographs on the Evaluation of Carcinogenic Risks to Humans:
No carcinogens present or none present in regulated quantities
ACGIH: US.ACGIH Threshold Limit Values:
No carcinogens present or none present in regulated quantities
US. National Toxicology Program (NTP) Report on Carcinogens:
No carcinogens present or none present in regulated quantities
US. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053), as amended:
No carcinogens present or none present in regulated quantities
Germ Cell Mutagenicity
no evidence of mutagenic effects
No evidence of mutagenic effects reported in literature.
In vitro
Product: gene mutation test, OECD 471: , negative
gene mutation test, OECD 490: , negative
Chromosomal aberration, OECD 473: , negative
In vivo
Product: Chromosomal aberration, OECD 475, Oral, Rat, Male, negative
Reproductive toxicity
Product: no evidence of reproductiontoxic properties
Specific Target Organ Toxicity – Single Exposure
Product: no evidence for hazardous properties
Specific Target Organ Toxicity – Repeated Exposure
Product: no evidence for hazardous properties
Aspiration Hazard
Product: Not applicable
Information on health hazards
Other hazards
Product: Based on available data, the classification criteria are not met.;
Version: 1.7
Revision Date: 01/19/2024
Product name: AEROSIL 200
8/11
000005044737 US 2025-01-10 00000000000005210637
12. Ecological information
Ecotoxicity:
Acute hazards to the aquatic environment:
Fish
Product: LC 50, (Brachydanio rerio), 96 h, > 10,000 mg/lOECD 203, The reported
toxic effects relate to the nominal concentration.
Aquatic Invertebrates
Product: EC 50, Daphnia magna, 24 h, > 1,000 mg/lOECD 202, The reported toxic
effects relate to the nominal concentration.
Toxicity to Aquatic Plants
Product: EC 50, Desmodesmus subspicatus (green algae), 72 h, > 173 mg/l,
OECD 201
Toxicity to microorganisms
Product: EC 50, local activated sludge, 3 h, > 2,500 mg/l, OECD 209
Chronic hazards to the aquatic environment:
Fish
Product: No data available.
Aquatic Invertebrates
Product: No data available.
Toxicity to microorganisms
Product: EC 50, local activated sludge, 3 h, > 2,500 mg/l, OECD 209
Persistence and Degradability
Biodegradation
Product: The methods for determining biodegradability are not applicable to
inorganic substances.
BOD/COD Ratio
Product: No data available.
Bioaccumulative potential
Bioconcentration Factor (BCF)
Product: Not to be expected.
Partition Coefficient n-octanol / water (log Kow)
Product: , Not applicable
Mobility in soil:
Product: No remarkable mobility in soil is to be expected.
Results of PBT and vPvB assessment:
Product: No data available.
Version: 1.7
Revision Date: 01/19/2024
Product name: AEROSIL 200
9/11
000005044737 US 2025-01-10 00000000000005210637
Other adverse effects:
Other hazards
Product: The data we have at our disposal do not necessitate identification
concerning environmental hazard.
13. Disposal considerations
Disposal methods: Waste must be disposed of in accordance with federal, state, provincial
and local regulations.
Contaminated Packaging: Packaging material should be recycled or disposed of in accordance
with federal, state and local regulations.
14. Transport information
Domestic regulation
49 CFR
Not regulated as a dangerous good
Remarks : Not dangerous according to transport regulations.
International Regulations
UNRTDG
Not regulated as a dangerous good
IATA-DGR
Not regulated as a dangerous good
IMDG-Code
Not regulated as a dangerous good
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.
15. Regulatory information
US Federal Regulations
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
None present or none present in regulated quantities.
US. Toxic Substances Control Act (TSCA) Section 5(a)(2) Proposed Significant New Use Rules
(SNURs) (40 CFR 721, Subpt E)
None present or none present in regulated quantities.
US. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053), as amended
None present or none present in regulated quantities.
CERCLA Hazardous Substance List (40 CFR 302.4):
None present or none present in regulated quantities.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories
Version: 1.7
Revision Date: 01/19/2024
Product name: AEROSIL 200
10/11
000005044737 US 2025-01-10 00000000000005210637
Not classified
US. EPCRA (SARA Title III) Section 304 Extremely Hazardous Substances Reporting Quantities and
the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Hazardous
Substances
None present or none present in regulated quantities.
US. EPCRA (SARA Title III Section 313 Toxic Chemical Release Inventory (TRI) Reporting
None present or none present in regulated quantities.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130):
None present or none present in regulated quantities.
Clean Water Act Section 311 Hazardous Substances (40 CFR 117.3)
None present or none present in regulated quantities.
US State Regulations
US. California Proposition 65
No ingredient requiring a warning under CA Prop 65.
16.Other information, including date of preparation or last revision
NFPA Hazard ID
Flammability
Health
Reactivity
Special hazard.
Hazard rating: 0 – Minimal; 1 – Slight; 2 – Moderate; 3 – Serious; 4 – Severe; RNP – Rating not possible
Version #: 1.7
Generation date: 01/19/2024
Date of first report version: 03/27/2019
Abbreviations and acronyms:
: Source: 54 FR 2701
/ PEL: Permissible exposure limit:
AIIC – Australian Inventory of Industrial Chemicals; ASTM – American Society for the Testing of Materials;
bw – Body weight; CERCLA – Comprehensive Environmental Response, Compensation, and Liability Act;
CMR – Carcinogen, Mutagen or Reproductive Toxicant; DIN – Standard of the German Institute for
Standardisation; DOT – Department of Transportation; DSL – Domestic Substances List (Canada); ECx –
Concentration associated with x% response; EHS – Extremely Hazardous Substance; ELx – Loading rate
associated with x% response; EmS – Emergency Schedule; ENCS – Existing and New Chemical
Substances (Japan); ErCx – Concentration associated with x% growth rate response; ERG – Emergency
Response Guide; GHS – Globally Harmonized System; GLP – Good Laboratory Practice; HMIS –
Hazardous Materials Identification System; IARC – International Agency for Research on Cancer; IATA –
International Air Transport Association; IBC – International Code for the Construction and Equipment of
Ships carrying Dangerous Chemicals in Bulk; IC50 – Half maximal inhibitory concentration; ICAO –
International Civil Aviation Organization; IECSC – Inventory of Existing Chemical Substances in China;
IMDG – International Maritime Dangerous Goods; IMO – International Maritime Organization; ISHL –
0
0
1
Version: 1.7
Revision Date: 01/19/2024
Product name: AEROSIL 200
11/11
000005044737 US 2025-01-10 00000000000005210637
Industrial Safety and Health Law (Japan); ISO – International Organisation for Standardization; KECI –
Korea Existing Chemicals Inventory; LC50 – Lethal Concentration to 50 % of a test population; LD50 –
Lethal Dose to 50% of a test population (Median Lethal Dose); MARPOL – International Convention for the
Prevention of Pollution from Ships; MSHA – Mine Safety and Health Administration; n.o.s. – Not Otherwise
Specified; NFPA – National Fire Protection Association; NO(A)EC – No Observed (Adverse) Effect
Concentration; NO(A)EL – No Observed (Adverse) Effect Level; NOELR – No Observable Effect Loading
Rate; NTP – National Toxicology Program; NZIoC – New Zealand Inventory of Chemicals; OECD –
Organization for Economic Co-operation and Development; OPPTS – Office of Chemical Safety and
Pollution Prevention; PBT – Persistent, Bioaccumulative and Toxic substance; PICCS – Philippines
Inventory of Chemicals and Chemical Substances; (Q)SAR – (Quantitative) Structure Activity Relationship;
RCRA – Resource Conservation and Recovery Act; REACH – Regulation (EC) No 1907/2006 of the
European Parliament and of the Council concerning the Registration, Evaluation, Authorisation and
Restriction of Chemicals; RQ – Reportable Quantity; SADT – Self-Accelerating Decomposition
Temperature; SARA – Superfund Amendments and Reauthorization Act; SDS – Safety Data Sheet; TCSI –
Taiwan Chemical Substance Inventory; TECI – Thailand Existing Chemicals Inventory; TSCA – Toxic
Substances Control Act (United States); UN – United Nations; UNRTDG – United Nations
Recommendations on the Transport of Dangerous Goods; vPvB – Very Persistent and Very
Bioaccumulative
Further Information: No data available.
Revision Information Changes since the last version are highlighted in the margin. This version
replaces all previous versions.
Disclaimer: This information and any recommendations, technical or otherwise, are
presented in good faith and believed to be correct as of the date
prepared. Recipients of this information and recommendations must
make their own determination as to its suitability for their purposes. In no
event shall Evonik assume liability for damages or losses of any kind or
nature that result from the use of or reliance upon this information and
recommendations. EVONIK EXPRESSLY DISCLAIMS ANY
REPRESENTATIONS AND WARRANTIES OF ANY KIND, WHET HER
EXPRESS OR IMPLIED, AS TO THE ACCURACY, COMPLETENESS,
NON-INFRINGEMENT, MERCHANTABILITY AND/OR FITNESS FOR A
PARTICULAR PURPOSE (EVEN IF EVONIK IS AWARE OF SUCH
PURPOSE) WITH RESPECT TO ANY INFORMATION AND
RECOMMENDATIONS PROVIDED. Reference to any tra de names used
by other companies is neither a recommendation nor an endorsement of
the corresponding product, and does not imply that similar products
could not be used. Evonik reserves the right to make any changes to the
information and/or recommendations at any time, without prior or
subsequent notice.
by | Sep 27, 2025
Page 1 of 9
MALAYAN ADHESIVES AND CHEMICALS SDN BHD (6336X)
No. 9 Jalan Utas 15/7, 40200 Shah Alam Selangor Darul Ehsan, Malaysia
Tel: (603) 5566 1188 Fax: (603) 5566 1122 Website: www.mac-resins.com
SAFETY DATA SHEET
Document ID : MS-001 Issue Date : 28 June 2024
Revision : 3 Supersedes date : 24 May 2024
1. IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY
(PENGENALPASTIAN PRODUK KIMIA DAN SYARIKAT)
1.1
Product Form (Bentuk Produk)
Product Name (Nama Produk)
Trade Name (Nama Dagangan)
Chemical Name (Nama Kimia)
Chemical Family (Kumpulan Bahan Kimia)
CAS Number (Nombor CAS)
Manufacturer s Code (Kod Pengeluar)
: Powder (Serbuk)
: Phenolic microspheres (Mikrosfera finolik)
: PHENOSET microspheres (Mikrosfera PHENOSET)
: Phenol formaldehyde polymer, cured (thermoset) (Polimer
Fenol Formaldehid, termoset)
: Phenol-Aldehyde (Fenol-Aldehid)
: –
: BJO-0930, BJO-0840, EPO-0360, SPO-0620
BPO-0110
1.2
1.3
Use of product (Kegunaan)
Functional filler for composites. (Pengisi berfungsi untuk komposit.)
Company Identification (Pengenalpastian Syarikat)
MALAYAN ADHESIVES AND
CHEMICALS SDN. BHD.
No. 9, Jalan Utas 15/7, 40200 Shah Alam,
Selangor Darul Ehsan, MALAYSIA
Tel: +603-5566 1188 Fax:+603-5566 1122
Importer/Distributor (Pengimport/Pengedar):
1.4
Emergency telephone (Nombor telefon kecemasan):
+603-5566 1188
2. HAZARDS IDENTIFICATION (PENGENALPASTIAN BAHAYA)
Product is classified as non-hazardous for use/supply.
(Produk diklasifikasikan sebagai tidak berbahaya untuk kegunaan/bekalan.)
Dust may cause irritation, experienced as stinging with excessive blinking and tear production.
(Habuk boleh menyebabkan kerengsaan, dialami sebagai rasa pedih dengan berlebihan kerdipan dan pengeluaran air mata. )
Material may contain a trace amount (<0.1%) of free formaldehyde. There should be minimal risk when
adequate ventilation is used due to the very low formaldehyde concentration.
Page 2 of 9
(Bahan boleh mengandungi jumlah surih (<0.1%) formaldehid bebas. Risiko adalah minimum apabila pengudaraan
mencukupi digunakan kerana kepekatan formaldehid ditahap rendah.)
3. COMPOSITION / INFORMATION ON INGREDIENTS (KOMPOSISI / MAKLUMAT BAHAN)
Chemical Identity : Phenol formaldehyde polymer, cured (thermoset).
(Identiti kimia) (Polimer Fenol Formaldehid, termoset.)
Synonyms : Phenolic microsphere.
(Sinonim) : (Mikrosfera fenolik.)
Ingredient CAS No. EC No. Classification Code H-code Weight, % (Bahan)
(No.CAS) (No.EC) (Kod Klasifikasi) (Kod H) (Kadaran%)
Phenolic - - None None >96
Microspheres*(Inert) (Tiada) (Tiada)
(Mikrosfera finolik *(Lengai))
Formaldehyde** 50-00-0 200-001-8 Carc. 2 H351 <0.1
(Formaldehid**) (Kars. 2) H331
Acute Tox. 3 (inh) H311
(Toks. Akut 3 (sedut)) H301
Acute Tox. 3 (dermal) H314
(Toks. Akut 3 (kulit)) H318
Acute Tox. 3 (oral) H317
(Toks. Akut 3 (oral))
Skin Corr. 1B
(Kks. Kulit 1B)
Eye Dam. 1
(Kros. Mata 1)
Skin Sens. 1
(Pem. Kulit 1)
Phenol** 108-95-2 203-632-7 Muta. 2 H341 Not detected
(Fenol**) (Muta. 2) H331 (<0.001)
Acute Tox. 3 (inh) H311
(Toks. Akut 3 (sedut)) H301
Acute Tox. 3 (dermal) H373
(Toks. Akut 3 (kulit)) H314
Acute Tox. 3 (oral) H318
(Toks. Akut 3 (oral))
STOT RE 2
(STOT RE 2)
Skin Corr. 1B
(Kks. Kulit 1B)
Eye Dam. 1
(Kros. Mata 1)
Note (Nota):
*The product is made from phenol-formaldehyde (phenolic) resin having CAS No. 9003-35-4.
Phenoset microspheres is an article fulfilling the exemption of substance registration requirements under
REACH article 7(1) and has no CAS Number.
(* Produk ini diperbuat daripada fenol-formaldehid (fenolik) resin mempunyai CAS No. 9003-35-4.)
(Mikrosfera Phenoset adalah 'artikel' yang memenuhi pengecualian keperluan pendaftaran bahan di bawah REACH Artikel 7
(1) dan tidak mempunyai Nombor CAS.)
**Material is not considered hazardous in the classification of product as its concentration is below
concentration cut-off point.
(** Bahan ini adalah tidak dianggap berbahaya dalam klasifikasi produk kerana kepekatannya adalah di bawah kepekatan
titik potong.)
4. FIRST AID MEASURES (LANGKAH-LANGKAH PERTOLONGAN CEMAS)
Page 3 of 9
Skin contact (Sentuhan kulit)
Remove contaminated clothing. Wash skin with soap and water. Obtain medical attention if irritation
persists. Wash clothing before reuse.
(Tanggalkan pakaian yang tercemar. Basuh kulit dengan sabun dan air. Dapatkan rawatan doktor jika kerengsaan
berterusan. Pastikan pakaian dibasuh dengan bersih sebelum dipakai semula.)
Eye contact (Sentuhan mata)
Immediately flush eyes with water and continue for several minutes. Obtain medical attention if discomfort
persists.
(Segera basuh mata dengan air yang banyak selama beberapa minit. Dapatkan rawatan perubatan jika ketidakselesaan
berterusan.)
Inhalation(Penyedutan)
If signs and symptoms develop, remove person to fresh air. If symptoms persist, obtain medical attention.
(Jika terdapat tanda-tanda dan simptom-simptom, alihkan mangsa ke kawasan udara segar. Jika berterusan, dapatkan
rawatan perubatan.)
Ingestion (Ketelanan)
Do not induce vomiting unless instructed to do so by medical personnel. Unless unconscious, give victim
lots of water. Obtain medical attention.
(Jangan paksa mangsa muntah tanpa arahan pegawai perubatan. Melainkan jika tidak sedarkan diri, beri mangsa air yang
banyak. Dapatkan rawatan perubatan.)
Notes to physician (Nota kepada pegawai perubatan):
There is no specific antidote. Treatment or overexposure should be directed at the control of the
symptoms and the clinical condition of the patient.
(Tiada penawar khusus. Rawatan atau pendedahan berlebihan harus diarahkan pada kawalan gejala dan keadaan klinikal
pesakit.)
5. FIRE-FIGHTING MEASURES (LANGKAH-LANGKAH PEMADAMAN KEBAKARAN)
Suitable Extinguishing media (Media pemadam yang sesuai):
Apply alcohol type or all-purpose type foams by manufacturers recommended techniques for large fires.
Use carbon monoxide or dry chemical media for small fires. Do not direct a solid stream of water or foam
into burning molten material; this may cause spattering and spread of fire.
(Gunakan jenis alkohol atau buih pelbagai guna oleh pengeluar yang mengesyorkan teknik bagi nyalaan api yang besar.
Gunakan karbon monoksida atau bahan kimia kering bagi kebakaran kecil. Jangan mengarahkan aliran air deras atau busa ke
dalam pembakaran bahan lebur; ini boleh menyebabkan percikan dan penyebaran api.)
Extinguishing media to be avoided (Media pemadam yang perlu dielakkan)
None. (Tiada.)
Unusual fire and explosion hazards (Kebakaran dan letupan luar biasa bahaya)
Avoid dispersion of dust in air to reduce potential of dust ignition / explosion.
(Elakkan penyebaran debu dalam udara untuk mengurangkan potensi penyalaan / letupan debu.)
Special protective equipment for fire fighters (Peralatan pelindung khas untuk ahli bomba)
Use self-contained breathing apparatus and protective coating.
(Gunakan alat pernafasan serba lengkap dan lapisan pelindung.)
6. ACCIDENTAL RELEASE MEASURES (LANGKAH-LANGKAH PENGAWALAN PELEPASAN TIDAK SENGAJA)
Personal precautions (Langkah perlindungan diri):
Wear suitable protective clothing. (Pakai pakaian pelindung yang sesuai.)
Methods for cleaning up (Kaedah pembersihan):
Ventilate with fresh air. Collect as much of the spilled material as possible. Use wet sweeping or water to
avoid dusting. Collect and place in a closed container. Dispose as approved by your State Regulations.
(Pengudaraan dengan udara segar. Mengumpul seberapa banyak bahan yang tertumpah yang mungkin. Gunakan penyapu
basah atau air untuk mengelakkan debu. Kumpul dan letakkan dalam bekas yang tertutup. Lupuskan sebagaimana yang
diluluskan oleh Peraturan-Peraturan Negeri anda.)
7. HANDLING AND STORAGE (PENGENDALIAN DAN PENYIMPANAN)
Page 4 of 9
7.1 Handling (Pengendalian)
General precaution (Langkah berjaga-jaga umum)
For industrial and professional use only. (Untuk kegunaan industri dan profesional sahaja.)
Avoid dispersion of dust in air. (Elakkan penyebaran debu di udara.)
Electrically bond and ground equipment. (Pembumian alatan secara elektrik.)
Avoid sparks and flame under dust conditions. (Elakkan percikan dan nyalaan api di bawah keadaan berdebu.)
Use with adequate ventilation. (Gunakan pengudaraan yang mencukupi.).
Ventilation (Pengudaraan)
Special local ventilation is recommended in areas where containers are opened and their containers are
discharged or in any areas where dusting conditions may occur.
(Pengudaraan setempat khas adalah disyorkan di kawasan di mana bekas dibuka dan bekas mereka dilepaskan atau di
mana-mana kawasan di mana keadaan debu mungkin berlaku.)
Other precaution (Langkah berjaga-jaga lain):
[Caution] May undergo spontaneous smouldering if stored or heated in bulk above 35
o
C under conditions
allowing air ingress to the product. Store package material in a cool, well-ventilated area.
([Awas] Boleh membara secara tiba-tiba jika disimpan atau dipanaskan secara pukal pada suhu lebih 35
o
C di bawah
keadaan yang membenarkan udara masuk ke dalam produk. Simpan bahan pakej di tempat yang dingin dengan
pengudaraan yang baik.)
Do not store under the sun. (Jangan simpan di bawah sinaran matahari.)
Do not dry in package use special drying instructions as below.
(Jangan keringkan di dalam pakej sila guna arahan pengeringan khas seperti di bawah.)
Microspheres will undergo oxidation at elevated temperatures. Due to the microspheres excellent insulating
characteristics, the internal temperature of the mass can increase to the point where spontaneous ignition
and smouldering can occur. The temperature at which this occurs is a function of the geometry, amount of
material being heated and available oxygen. Smouldering appears as a soft glow similar to burning charcoal.
(Mikrosfera akan menjalani pengoksidaan pada suhu tinggi. Disebabkan ciri-ciri penebat mikrosfera yang unggul, suhu
dalaman jisim boleh meningkat kepada titik di mana nyalaan dan bara api secara tiba-tiba boleh berlaku. Suhu yang
menyebabkan perkara ini berlaku berkaitan dengan geometri, jumlah bahan yang dipanaskan dan oksigen yang tersedia. Bara
api muncul sebagai cahaya lembut, sama seperti arang yang terbakar.)
Drying instructions for the Phenoset microspheres (Arahan pengeringan untuk mikrosfera Phenoset)
To reduce the moisture content of this product to less than 4%, dry a two-inch layer of the product at a
maximum temperature of 75
o
C for 24 hours. To prevent oven or product contamination, the metal drying
tray should be covered with a cloth that will allow the product moisture to evaporate.
(Untuk mengurangkan kandungan kelembapan produk ini kepada kurang daripada 4%, keringkan lapisan dua inci produk
pada suhu maksimum 75
o
C selama 24 jam. Untuk mengelakkan pencemaran ketuhar atau produk, dulang logam
pengeringan hendaklah ditutup dengan kain yang akan membolehkan kelembapan produk tersejat.)
7.2 Storage (Penyimpanan)
Keep container closed. (Pastikan bekas sentiasa ditutup.)
7.3
Specific use (s) (Kegunaan khusus)
For industrial and professional use only. (Untuk kegunaan industri dan profesional sahaja.)
8. EXPOSURE CONTROLS/PERSONAL PROTECTION (KAWALAN PENDEDAHAN / PERLINDUNGAN DIRI)
Page 5 of 9
8.1 Exposure limit values (Had pendedahan)
Formaldehyde (Formaldehid)
Classified to carcinogenic Category 1B (presumed human carcinogen) by European Composites
Industry Association (EuCIA)
(Dikelaskan kepada karsinogen Kategori 1B (dianggap karsinogenik bagi manusia) oleh Persatuan Industri
Komposit Eropah (EuCIA))
OSHA* - 8 hours Time Weighted Average (TWA) 0.75 ppm
(OSHA* - 8 jam Purata Wajaran Masa (TWA) 0.75 ppm)
OSHA* - 15 minutes Short Term Exposure Limit (STEL) 2 ppm
(OSHA* - 15 minit Had Pendedahan Jangka-Pendek (STEL) 2 ppm)
USECHH Regulations 2000 & ACGIH Ceiling limit 0.3 ppm (formaldehyde)
(USECHH Peraturan 2000 & ACGIH had maksimum 0.3 ppm (formaldehid)
Phenol (Fenol)
OSHA* & ACGIH - 8 hours Time Weighted Average (TWA) 5 ppm
(OSHA* & ACGIH - 8 jam Purata Wajaran Masa (TWA) 5 ppm)
8.2 Exposure controls (Kawalan pendedahan)
8.2.1 Occupational exposure controls (Kawalan pendedahan pekerjaan)
Respiratory protection : Dust respirator, if dusting occurs.
(Perlindungan pernafasan) (Alat pernafasan debu, jika terdapat debu.)
Hand protection : General working gloves are acceptable.
(Perlindungan tangan) (Sarung tangan kerja biasa boleh diterima.)
Eye protection : Safety glasses.
(Perlindungan mata) (Cermin mata keselamatan.)
Other protective equipment : Eye bath and safety shower. Adequate ventilation.
(Peralatan perlindungan lain) (Mandian mata dan pancuran air keselamatan. Pengudaraan yang mencukupi)
8.2.2
Environmental exposure controls (Kawalan pendedahan alam sekitar)
None established. (Tidak ditubuhkan.)
9. PHYSICAL AND CHEMICAL PROPERTIES (SIFAT-SIFAT FIZIKAL DAN KIMIA)
Appearance (Rupa bentuk) : Red brown, fine powder. (Coklat kemerahan, serbuk halus.)
Odour (Bau) : Odourless. (Tidak berbau.)
Molecular weight (Berat molekul) : >10,000, Fully cured C-stage.
(> 10,000, pempolimeran sepenuhnya peringkat C.)
Relative density (Ketumpatan relatif) : 0.10 0.80.
Self-ignition temperature (Suhu swapencucuhan) : 500
o
C (ASTM D1929).
Boiling point (Takat didih) : Does not boil. (Tidak mendidih.)
Melting point (Takat lebur) : Does not melt. (Tidak melebur.)
Solubility (Kebolehlarutan) : Not soluble in water. (Tidak larut air.)
10. STABILITY AND REACTIVITY (KESTABILAN DAN KEREAKTIFAN)
Page 6 of 9
General (Umum) : Stable. (Stabil.)
Conditions to avoid : None known.
(Keadaan untuk dielakkan) (Tidak diketahui.)
Materials to avoid : Strong acids and base, halogens, acyl halides.
(Bahan untuk dielak) (Asid dan alkali kuat, halogen, halida asil.)
Hazardous decomposition products : Carbon monoxide, carbon dioxide, formaldehyde and phenol
(Produk penguraian berbahaya) derivatives upon decomposition.
(Karbon monoksida, karbon dioksida, formaldehid dan fenol derivatif jika
terurai.)
Hazardous polymerisation : Will not occur.
(Pempolimeran berbahaya) : (Tidak akan berlaku.)
11. TOXICOLOGICAL INFORMATION (MAKLUMAT TOKSIKOLOGI)
Skin corrosion/irritation (Kakisan atau kerengsaan kulit)
Not classified. (Tidak diklasifikasikan.)
Serious eye damage/irritation (Kerosakan mata atau yang serius/kerengsaan)
Not classified. (Tidak diklasifikasikan.)
Skin sensitization (Pemekaan kulit)
Not classified. (Tidak diklasifikasikan.)
Germ cell mutagenicity (Kemutagenan sel germa)
Not classified. (Tidak diklasifikasikan.)
Chronic toxicity (Ketoksikan kronik)
Not classified. (Tidak diklasifikasikan.)
Reproductive toxicity (Ketoksikan pembiakan)
Not classified. (Tidak diklasifikasikan.)
Specific target organ toxicity single exposure (Ketoksikan organ sasaran khusus – pendedahan tunggal)
Not classified. (Tidak diklasifikasikan.)
Specific target organ toxicity repeated exposure (Ketoksikan organ sasaran khusus – pendedahan berulang)
Not classified. (Tidak diklasifikasikan.)
Aspiration hazard (Bahaya aspirasi)
Not classified. (Tidak diklasifikasikan.)
Potential adverse human health effects and symptoms
(Kesan kesihatan manusia yang berpotensi buruk dan gejala)
Harmful if swallowed. (Berbahaya jika ditelan.)
Symptoms/injuries after inhalation (Gejala/kecederaan selepas penyedutan)
Not classified. (Tidak diklasifikasikan.)
12. ECOLOGICAL INFORMATION (MAKLUMAT EKOLOGI)
Page 7 of 9
Ecotoxicity : None known.
(Ketoksikan) (Tidak diketahui.)
Mobility : Does not dissolve in water.
(Kebolehgerakan) (Tidak larut dalam air.)
Persistence and degradability : Not determined.
(Ketahanan dan penguraian) (Tidak ditentukan.)
Bioaccumulative potential : Unknown.
(Potensi bioakumulatif) (Tidak diketahui.)
13. DISPOSAL CONSIDERATIONS (MAKLUMAT PEMBUANGAN)
Dispose off in accordance with appropriate National and local regulations.
(Melupuskan mengikut peraturan-peraturan yang ditetapkan oleh kebangsaan dan setempat.)
14. TRANSPORT INFORMATION (MAKLUMAT PENGANGKUTAN)
UN NUMBER:
(Nombor UN)
UN PROPER SHIPPING NAME: Non Regulated
(Nama UN penghantaran yang betul) (Tidak dikawal selia)
TRANSPORT HAZARD CLASS:
(Kelas bahaya pengangkutan)
U.S. DOT HAZARD CLASS: Not restricted for transportation.
(Kelas bahaya DOT U.S.) (Tidak dihadkan untuk pengangkutan)
CANADA TDG HAZARD CLASS: Not restricted for transportation.
(Kelas bahaya TDG Kanada) (Tidak dihadkan untuk pengangkutan)
EUROPE ADR/RID HAZARD CLASS: Not restricted for transportation.
(Kelas bahaya Eropah ADR/RID) (Tidak dihadkan untuk pengangkutan)
IMDG CODE (OCEAN) HAZARD CLASS: Not restricted for transportation.
(Kelas bahaya Kod IMDG (Lautan) (Tidak dihadkan untuk pengangkutan)
ICAO/IATA (AIR) HAZARD CLASS: Not restricted for transportation.
(Kelas bahaya ICAO/IATA (Udara) (Tidak dihadkan untuk pengangkutan)
PACKING GROUP :
(Kumpulan Pembungkusan)
ENVIRONMENTAL HAZARD S:
(Bahaya alam sekitar)
MARINE POLLUTANT : No
(Bahaya pencemaran marin) (Tidak)
HAZARDOUS SUBSTANCE (USA) : No
(Bahan Berbahaya (USA)) (Tidak)
SPECIAL PRECAUTIONS FOR USER : Information is not available
(Langkah berjaga jaga khas untuk pengguna) (Maklumat tidak tersedia)
TRANSPORTING IN BULK ACCORDING TO ANNEX II OF MARPOL 73/78 AND THE IBC CODE :
(Mengangkut secara pukal mengikut lampiran II MARPOL 73/78 dan Kod IBC)
Information is not available
(Maklumat tidak tersedia)
LABEL FOR CONVEYANCE:
(Label untuk pengangkutan)
OTHER INFORMATION:
(Maklumat lain)
Page 8 of 9
15. REGULATORY INFORMATION (MAKLUMAT PENGAWALAN)
Label Elements [Regulations (EC) No. 1272/2008]
(Unsur Label [Peraturan (EC) No 1272/2008])
None Not classified as hazardous.
(Tiada – Tidak dikelaskan sebagai berbahaya.)
Inventory Listed In:
(Inventori Disenaraikan Dalam:)
China IECSC, EU EINECS, US TSCA, Canada DSL, Japan ENCS, Korea KECL, Taiwan NECI,
Philippine PICCS, Australia AICS, New Zealand NZIoC.
(China IECSC, EU EINECS, US TSCA, Kanada DSL, Jepun ENCS, Korea KECL, Taiwan Neci,
Filipina PICCS, Australia AICS, New Zealand NZIoC.)
16. OTHER INFORMATION (MAKLUMAT LAIN)
Product category (Kategori produk):
Phenoset microspheres is an article fulfilling the exemption of substance registration requirements under
REACH article 7(1).
(Mikrosfera Phenoset adalah ‘artikel’ yang memenuhi pengecualian keperluan pendaftaran bahan di bawah
REACH Artikel 7 (1).)
Text on Label (Teks pada Label):
CAUTION! May undergo spontaneous smouldering if stored or heated in bulk above 35 C under
conditions allowing air ingress to the product.
(AWAS! Boleh membara secara tiba-tiba jika disimpan atau dipanaskan secara pukal pada suhu lebih 35
o
C di bawah
keadaan yang membenarkan udara masuk ke dalam produk.)
Store in cool, well-ventilated area.
Page 9 of 9
(Simpan dalam kawasan sejuk dan ventilasi baik.)
Do not store under the sun.
(Jangan simpan di bawah sinaran matahari.)
Do not dry in package refer special drying instructions.
(Jangan keringkan di dalam pakej sila rujuk arahan pengeringan yang ditetapkan.)
FOR INDUSTRIAL USE ONLY
(UNTUK KEGUNAAN INDUSTRI SAHAJA)
Recommended usage and restrictions:
(Cadangan penggunaan dan sekatan:)
Please consult the product and/or applications information bulletins for this product.
(Sila rujuk produk dan / atau aplikasi buletin maklumat untuk produk ini.)
Disclaimer (Penafian)
The information contains herein is correct to the best of our knowledge. We disclaim any liability as to the recommendations or
completeness of the information. The final evaluation on the fitness of use lies on the users digression. All material has hidden hazards
and should be used with extreme care. Even though various hazards had been listed herein, we do not warranty that those are the only
existing hazards.
(Maklumat yang terkandung di sini adalah betul sepanjang pengetahuan kami. Kami menafikan sebarang liabiliti bagi cadangan atau kelengkapan
maklumat tersebut. Penilaian akhir mengenai kesesuaian penggunaan terletak pada penyimpangan pengguna. Semua bahan mempunyai bahaya
tersembunyi dan harus digunakan dengan berhati-hati. Walaupun pelbagai bahaya telah disenaraikan di sini, kami tidak memberi jaminan jika terdapat
bahaya yang lain.)
Revision Date : 28 June 2024
(Tarikh Semakan) (28 June 2024)
Revision Summary : Changes made on transport information
(Ringkasan Semakan) Perubahan yang dibuat pada maklumat pengangkutan
by | Sep 27, 2025
Safety Data Sheet
In compliance with 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
p 1 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
Revision Date: May 20, 2025
SECTION 1. IDENTIFICATION
1.1 Product identifier:
Aquatal 303
Aquatal 303 Compacted
Beaverwhite 325
Cimpact 699
EZ Flow 40
EZ Flow MT
Grade 25 Y
Grade 25 YG
Heliocote MT
Heliocote MT Compacted
HAR-002
HON-MT
JetFil M200
JetFil M300
JetFil M353/JetFil M353C
JetFil M400/JetFil M400C
JetFil M450/JetFil M450C
JetFil M500/JetFil M500C
JetFil M550
JetFil M600/JetFil M600C
JetFil M700/JetFil M700C
JetFil M700DT2
Mistrofil CP3 Compacted
Mistrofil CP5 Compacted
Mistrofil MT Compacted
MistrOliva M10DT2
MistrOliva TF
Mistron 002
Mistron 003 Ca
Mistron 100
Mistron 100 Compacted
Mistron 100DT2
Mistron 102 Compacted
Mistron 105 Compacted
Mistron 201
Mistron 303
Mistron 353
Mistron 400C
Mistron 600C
Mistron 403
Mistron 403 Ca
Mistron 403DT2
Mistron 554
Mistron 604
Mistron AB
Mistron CF5A-M
Mistron EG
Mistron FC 002
Mistron Frost
Mistron HYPERPLATE D
Mistron Monomix
Mistron Monomix PCB
Mistron Monomix TS-M
Mistron PCR
Mistron PCR DT2
Mistron RCS
Mistron RCS AC
Mistron RCS C
Mistron Superfrost
Mistron Ultramix
Mistron Vapor
Mistron Vapor 6
Mistron Vapor Compacted
Mistron Vapor R
Mistron Vapor R Compacted
Mistron Vapor R Densified
Mistron Vapor RE
Mistron Vapor RE Compacted
Mistron Vapor Ultra
Nicron 002
Nicron 302
Nicron 303
Nicron 353
Nicron 402
Nicron 403
Nicron 503
Nicron 504
Nicron 554
Nicron 604
Nicron 660
Nicron 665
Nicron 674
Nicron 674C (Compacted)
Nicron 674DT
Nicron 674DT2
Silverline 000
Silverline 001
Silverline 002
Silverline 202
Silverline 002E
Silverline 202 GE
Silverline 303
Silverline 403
Silverline 403 Compacted
Silverline 503DT
Silverline 504
Silverline 604
Steasilk 5YM
Steasilk YC Compacted
Steawhite 2
Steawhite TS60
Yellowstone
Yellowstone AC
Yellowstone C
Yellowstone Ca
1.2 Synonyms: Talc, steatite, soapstone, hydrous magnesium silicate
1.3 Identified uses: Functional mineral for use in paper, paints, ceramics, plastics, etc.
Safety Data Sheet
p 2 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
1.4 Supplier:
Company name: Magris Talc USA, Inc.
Address: Montana Mills
767 Old Yellowstone Trail
Three Forks, MT 59752
USA
Tel: +1 406-285-5300
Fax: +1 406-285-3323
E-mail: regulatory@magristalc.com
Website: www.magristalc.com
1.5 Emergency telephone number:
Emergency phone number: +1 303-623-5716
Available outside office hours: Yes
SECTION 2. HAZARD IDENTIFICATION
2.1 GHS Classification: No classification
2.2 Label elements:
GHS Pictogram None
Signal word None
Hazard statement None
Precautionary statements None
Repeated and prolonged exposure to large amounts of talc dust can cause lung injury (pneumoconiosis).
Risk of injury is dependent on the duration and level of exposure.
SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS
The above-mentioned products are a natural association of talc, chlorite, magnesite and dolomite.
The specific percentages of composition of the ingredients are being withheld as a trade secret.
SECTION 4. FIRST-AID MEASURES
Description of first aid measures:
Inhalation: Remove to fresh air.
Ingestion: Drink plenty of water. Never give liquid to an unconscious person.
Eye contact: Immediately rinse with water for several minutes.
Skin contact: Wash skin thoroughly with soap and water.
Main constituents CAS Number EC Number Amount (%) Classification
Talc (hydrous magnesium silicate) 14807-96-6 238-877-9 > 96 No
Chlorite 1318-59-8 215-285-9 < 2 No
Dolomite 16389-88-1 240-440-2 < 2 No
Magnesite 546-93-0 208-915-9 < 2 No
Safety Data Sheet
p 3 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
SECTION 5. FIRE-FIGHTING MEASURES
5.1 Extinguishing media: All extinguishing media can be used.
5.2 Special hazards arising from the substance or mixture: The product is not flammable, combustible or
explosive. No hazardous thermal decomposition.
5.3 Advice for fire-fighters: No specific fire-fighting protection is required. Use an extinguishing agent
suitable for the surrounding fire.
SECTION 6. ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures: Use proper respiratory and
personal protective equipment. MSHA/NIOSH or OSHA/NIOSH approved respirator recommended.
Spilled materials may cause slippery conditions when wet. Care should be exercised when walking on
spills on floor or concrete pads.
6.2 Methods and material for containment and cleaning up: Dry product should be cleaned with a shovel
or vacuum cleaner while wearing the personal protective equipment described above. Do not discharge
into drains, watercourses or onto the ground. Washing the floor with water is not recommended since it
may cause the floor to become slippery. However, if talc is already wet, and only in this case, the floor
should be thoroughly flushed with water to remove all slipperiness.
SECTION 7. HANDLING AND STORAGE
7.1 Precautions for safe handing: Minimize dust generation and accumulation. If excessive dust is
generated, provide adequate ventilation and use proper respiratory and personal protective equipment.
7.2 Conditions for safe storage: Keep the product dry and in closed containers. Store it in a cool and
well-ventilated space.
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
8.1 Control parameters: Follow workplace regulatory exposure limits for all types of airborne dust (e.g.
total dust, respirable dust, and respirable crystalline silica dust). In the U.S., the ACGIH OEL (Occupational
Exposure Limit) for talc containing no asbestos fibers and less than 1% crystalline silica is 2 mg/m3
respirable fraction measured as an 8-hour TWA (Time Weighted Average). The OSHA exposure limit for
talc is 20 mppcf Permissible Exposure Limit (PEL) TWA. For the equivalent limits in other countries, please
consult a competent occupational hygienist or the local regulatory authority.
8.2 Appropriate engineering controls: Use exhaust ventilation, if required, to maintain dust concentration
below recommended exposure limits.
8.3 Personal protection measures:
(a) Eye protection: Wear side shield safety glasses.
(b) Hand protection: Rubber gloves are recommended for prolonged exposure.
(c) Respiratory protection: If a respirator is required, use of a MSHA/NIOSH or OSHA/NIOSH
approved respirator is recommended.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
9.1 Appearance: White or off white to light grey
9.2 Odor: Odorless
Safety Data Sheet
p 4 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
9.3 pH: 9 9.5 (suspension of 10% talc in water)
9.4 Melting point: >1300 C
9.5 Flammability (solid, gas): Not flammable
9.6 Upper/lower flammability or explosive limits: Not explosive. Limits do not apply.
9.7 Relative density: 2.58 2.83 g/cm
3
9.8 Solubility (ies):
Solubility in water: Negligible
Solubility in hydrofluoric acid: Yes
9.9 Decomposition temperature: >1000 C
9.10 Explosive properties: Not explosive
9.11 Oxidizing properties: Non-oxidizing
SECTION 10. STABILITY AND REACTIVITY
10.1 Reactivity: Inert, not reactive
10.2 Chemical stability: Chemically stable
10.3 Possibility of hazardous reactions: No hazardous reaction
10.4 Conditions to avoid: None
10.5 Incompatible materials: None known
10.6 Hazardous decomposition products: None
SECTION 11. TOXICOLOGICAL INFORMATION
Carcinogenic Status:
IARC: In 2006, IARC concluded that inhaled talc not containing asbestos or asbestiform fibers is not
classifiable as a human carcinogen (Group 3). IARC ruled that there is limited evidence that the use of
talc-based body powder for perineal dusting is a possible risk factor for ovarian cancer (Group 2B).
This is not a route of exposure relevant to workers and applies only to one specific use of talc.
OSHA: Not listed
ACGIH: A4 not classified as a human carcinogen
WHMIS 2015 Classification: Specific Target Organ Toxicity Repeated Exposure Category 1 (STOT
RE1)
NTP: Not listed
SECTION 12. ECOLOGICAL INFORMATION
12.1 Aquatic Toxicity: No known effects
12.2 Persistence and degradability: This product is an inorganic substance and therefore is not
considered biodegradable.
12.3 Bioaccumulative potential: Not relevant
12.4 Mobility in soil: Negligible
Safety Data Sheet
p 5 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
12.5 Other adverse effects: No specific adverse effects known
SECTION 13. DISPOSAL CONSIDERATIONS
13.1 Waste disposal information: Talc is not considered a hazardous waste as defined by the US EPA
RCRA (40 CFR 261) regulations. Observe all applicable federal, state and local regulations when
handling, storing or disposing of this substance.
13.2 Disposal of packaging: Where possible, recycling is preferable to disposal. Recycling and disposal
of packaging should be carried out by an authorized waste management company in compliance with
local regulations. Responsibility for proper waste disposal lies with the owner of the waste.
SECTION 14. TRANSPORT INFORMATION
14.1 US Department of Transportation (DOT): No classification assigned
14.2 Canadian Transportation of Dangerous Goods: No classification assigned
14.3 Land Transport ADR/RID: No classification assigned
14.4 Air Transport IATA/ICAO: No classification assigned
14.5 Maritime Transport IMDG: No classification assigned
14.6 Harmonized Tariff Code: Talc crushed or powdered. 2526.20.00 (stat suffix 00). Talc –
compacted. 6815.99.20 (stat suffix 00).
14.7 EPA TSCA 12(B) Export Notification: Not listed
SECTION 15. REGULATORY INFORMATION
15.1 International regulations:
Industrial Safety and Health Law: This product does not contain harmful or controlled hazardous
substances under ISHL. It contains <1% crystalline silica.
Toxic Chemical Control Act: This product does not contain chemical substances regulated as toxic,
observational, restricted or banned under TCCA.
Dangerous Substance Management Law: This product does not contain chemical substances
regulated under DSML.
Waste Management Law: Dispose of this product in accordance with the waste treatment
standards prescribed in Waste Management Law.
15.2 Other regulations based on domestic or foreign laws: The following inventories have been
investigated as to the publicly available portion of the lists:
MINERAL CAS No.
EINECS
(EU)
AIIC
(Australia)
CEPA
(DSL/NDSL)
(Canada)
KECI
Korean Gazette No.
(Korea)
ENCS/ISHL
(Japan)
Talc 14807-96-6 238-877-9 Yes Yes (DSL) KE-32773 (1)-468
MINERAL
IECSC
(China)
PICCS
(Philippines)
TSCA
(USA)
Swiss ID No.
(Switzerland)
NZIoC
(New Zealand)
CSNN
(Taiwan)
Safety Data Sheet
p 6 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
Talc Yes Yes Yes G-6939 Yes Yes
Regarding regulatory inventories, talc is considered to be a "naturally occurring substance with variable
composition". Talc ore contains variable amounts of associated minerals, such as magnesite, dolomite, and chlorite.
In the interest of full disclosure, we list these associated minerals on our SDSs, however from a regulatory
perspective, the product supplied is considered to be "talc" (CAS # 14807-96-6). Specifically, according to the Toxic
Substances Control Act (TSCA), talc meets the definition of a Naturally Occurring Substance , with unknown or
variable composition, complex reaction product or biological material (UVCB Substance).
15.3 Chemical safety assessment: Exempted from REACH registration in accordance with Annex V.7
15.4 Other pertinent classifications/regulations:
California Safe Drinking Water and Toxic Enforcement Act (California PROP 65) Status:
CALIFORNIA REQUIRED STATEMENT
WARNING: Talc is not listed, however the product supplied can expose you to chemicals
including crystalline silica (airborne particles of respirable size) which has been identified by
the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov .
State Right-To-Know: Talc is listed in Illinois, Massachusetts, New Jersey, Pennsylvania and Florida.
Clean Air Act Ozone depleting chemicals (ODC): None
CONEG Approved Packaging: Yes
National Fire Protection Association (NFPA) Ratings (0-4 scale):
Health = 0
Fire = 0
Reactivity = 0
National Paint and Coating Association (NPCA) Hazardous Material Identification System (HMIS)
Health: 1* (chronic potential)
Flammability: 0
Physical: 0
Personal protection: dust respirator, safety glasses or goggles, gloves
SECTION 16. OTHER INFORMATION
16.1 Date of last revision: May 20, 2025
Revision comments: Added Mistron Monomix PCB
Date of previous revision: December 4, 2024
16.2 References and sources:
1. Baan, R, Straif K, Secretan B, Ghissassi FE and Cogliano V. (2006), On behalf of the WHO
International Agency for Research on cancer Monograph Working Group. Carcinogenicity of
carbon black, titanium dioxide and talc. The Lancet Oncology. 7:295-296.
2. Wild, P.; Lung cancer risk and talc not containing asbestiform fibers: a review of the
epidemiological evidence . Occup. Environ. Med. 2006; 63, 4-9.
3. Cohrssen, B. and Powell C.H. (2001). Talc. In Patty s Toxicology, 5th ed., Bingham, E., Cohrssen, B.,
and Powell, C.H., eds., John Wiley & Sons, Inc. NY. pp. 519-538.
4. IARC Monographs on the Evaluation of Carcinogenic Risks to Humans Volume 93 (2010)
Carbon Black, Titanium Dioxide, and Talc.
Safety Data Sheet
p 7 of 7
SDS_MT_Talc_MT UC Prods_en_US_2025-05-20
5. Wild, P. and coll; Effects of talc dust on respiratory health: results of a longitudinal survey of 378
French and Austrian talc workers , Occup. Environ. Med. 2008; 65, 261-267.
6. USEPA 1992. Health Assessment Document for Talc, Environmental Criteria and Assessment
Office, Office of Health and Environmental Assessment, U.S. Environmental Protection Agency,
Research Triangle Park, NC. EPA 600/8-91/217, March 1992.
7. P. Leophonte and coll. La pathologie respiratoire chronique des travailleurs du talc , Rev. Fr. Mal.
Resp., 1980, 8, 43-45
8. S. Endo-Capron and coll. In vitro response of rat pleural mesothelial cells to talc samples in
genotoxicity assays (sister chromatid exchanges and DNA repair) Toxic in vitro, 1993, 7, 7-14.
9. P. Wild, M. Refregier, G. Auburtin, B. Carton, JJ. Moulin Survey of the respiratory health of the
workers of a talc producing factory , Occup. Environ. Med. 1995, 52, 470-477.
10. P. Wild and coll. A cohort mortality and nested case-control study of French and Austrian talc
workers Occup. Environ. Med 2002, 59, 98-105.
11. M. Coggiola and coll. An Update of a Mortality Study of Talc Miners and Millers in Italy , Am. J
Indust. Med. 2003, 44, 63-69
Notice to reader:
This safety data sheet complements the technical data sheets but does not replace them. The information
it contains is based on our present knowledge of the product on the date indicated. It is given in good
faith. Users should be warned about the risks associated with using the product for a different purpose
than that for which it was developed, and particularly for uses for which we are not qualified to give
advice.
These regulatory prescriptions are provided with a view to helping users meet their obligations when
using this product. This list should not be considered exhaustive and does not exempt users from ensuring
that they are not required to comply with any further prescriptions other than those mentioned above
concerning product possession and handling for which they are solely responsible.
Only the original English version is authoritative.
by | Sep 27, 2025
Page 1 of 5
SAFETY DATA SHEET
Document ID : SDSCLP-03 Issue Date : 03 April 20 15
Revision : 4 Supersedes date : 26 March 2015
1. IDENTIFICATION OF THE SUBSTANCE AND OF THE COMP ANY
1.1
Identification of product
Product Name
Trade Name
Chemical name
Manufacturer product ID
: Phenolic microspheres
: PHENOSET microspheres
: Phenol formaldehyde polymer, cured
: BJO-0930, BJO-0840, EPO-0360, SPO-0620
1.2
Use of product
Functional filler for composites
1.3
Company Identification
MALAYAN ADHESIVES & CHEMICALS SDN. BHD.
No. 9, Jalan Utas 15/7, 40200 Shah Alam,
Selangor Darul Ehsan, MALAYSIA
Importer/Distributor:
Tel: +603-5566 1188
Fax:+603-5566 1122
1.4 Emergency telephone
+603-5566 1188
2. HAZARDS IDENTIFICATION
Not classified as hazardous for use/supply
Dust may cause irritation, experienced as stinging with excessive blinking and tear production.
Material may contain trace amount (<0.2%) of free formaldehyde, which is listed by IARC, NTP and OSHA
as a carcinogen. There should be minimal risk when adequate ventilation is used due to the very low
formaldehyde concentration.
Page 2 of 5
3. COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient CAS no. EC no. Weight
%
Risk phrases Hazard Statements
Fully polymerized
phenolic resin, inert
NA NA >99.8 None None
Formaldehyde* 50-00-0 200-001-8 <0.2 R45, R68,
R23/24/25, R34,
R43
H350, H341, H331,
H311, H301, H314,
H317
Note*: Material is not considered hazardous in the classification of product as its concentration is below concentration cut-off point
Phenoset microspheres is an article fulfilling the exemption of substance registration requirements under
REACH article 7(1).
4. FIRST AID MEASURES
Skin contact:
Remove contaminated clothing. Wash skin with soap and water. Obtain medical attention if irritation
persists. Wash clothing before reuse.
Eye contact:
Immediately flush eyes with water and continue for several minutes. Obtain medical attention if discomfort
persists.
Inhalation:
If signs and symptoms develop, remove person to fresh air. If signs or symptoms persist, obtain medical
attention.
Ingestion:
Do not induce vomiting unless instructed to do so by medical personnel. Unless unconscious, give victim
lots of water. Obtain medical attention.
Notes to physician:
There is no specific antidote. Treatment or overexposure should be directed at the control of the symptoms
and the clinical condition of the patient
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing media:
Apply alcohol type or all-purpose type foams by manufacturers recommended techniques for large fires.
Use carbon monoxide or dry chemical media for small fires.
Do not direct a solid stream of water or foam into burning molten material; this may cause spattering and
spread of fire.
Extinguishing media to be avoided:
None
Unusual fire and explosion hazards:
Avoid dispersion of dust in air to reduce potential of dust ignition / explosion.
Special protective equipment for fire fighters:
Use self-contained breathing apparatus and protective coating.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Wear suitable protective clothing.
Methods for cleaning up:
Ventilate with fresh air. Collect as much of the spilled material as possible. Use wet sweeping or water to
avoid dusting. Collect and place in a closed container. Dispose as approved by your State Regulations.
Page 3 of 5
7. HANDLING AND STORAGE
7.1 Handling
General precaution:
For industrial and professional use only.
Avoid dispersion of dust in air.
Electrically bond and ground equipment.
Avoid sparks and flame under dust conditions.
Use with adequate ventilation.
Ventilation:
Special, local ventilation is recommended in areas where containers are opened and their containers are
discharged or in any areas where dusting conditions may occur.
Other precaution
{Caution] May undergo spontaneous smouldering if stored or heated in bulk above 35
o
C under conditions
allowing air ingress to the product. Store package material in a cool, well-ventilated area.
Do not store in the sun.
Do not dry in package use special drying instructions as below.
Microspheres will undergo oxidation at elevated temperatures. Due to the microspheres excellent
insulating characteristics, the internal temperature of the mass can increase to the point where
spontaneous ignition and smouldering can occur. The temperature at which this occurs is a function of the
geometry, amount of material being heated and available oxygen. Smouldering appears as a soft glow
similar to burning charcoal.
Drying instructions for the Phenoset microspheres:
To reduce the moisture content of this product to less than 4%, dry a two-inch layer of the product at a
maximum temperature of 75
o
C for 24 hours. To prevent oven or product contamination, the metal drying
tray should be covered with a cloth that will allow the product moisture to evaporate. 7.2 Storage
Keep container closed.
7.3 Specific use (s)
For industrial and professional use only.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
8.1
Exposure limit values .
No exposure limit has been established.
8.2
8.2.1
Exposure controls
Occupational exposure controls
Respiratory protection:
Hand protection :
Eye protection :
Other protective equipment:
Dust respirator, if dusting occurs
General working gloves are acceptable.
Safety glasses
Eye bath and safety shower. Adequate ventilation
.
8.2.2 Environmental exposure controls
None established.
Page 4 of 5
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Red brown, fine powder
Odour: Odourless
Molecular weight: >10,000, Fully cured C-stage
Relative density: 0.20 0.80
Self-ignition temperature: 500
o
C (ASTM D1929)
Boiling point: Does not boil
Melting point: Does not melt
Solubility: Not soluble in water
10. STABILITY AND REACTIVITY
General : Stable
Conditions to avoid: None known
Materials to avoid: Strong acids and base, halogens , acyl halides
Hazardous decomposition products: Carbon monoxide, car bon dioxide, formaldehyde and phenol
derivatives upon decomposition.
Hazardous polymerisation: Will not occur.
11. TOXICOLOGICAL INFORMATION
Effects from inhalation:
Upper respiratory tract irritation signs/symptoms may include sneezing, cough, and nasal discharge.
Effects from ingestion:
Gastrointestinal irritation.
Effects from skin contact:
Mechanical skin irritation. May result in itching.
Effects from eye contact:
Mechanical eye irritation. Signs and symptoms may include pain, redness and tears.
Significant data with possible relevance to human health
Formaldehyde has been shown to cause cancer in laboratory animals and mutations in a variety of in-vitro
test systems. The relevance of these findings for human is unknown. Formaldehyde is listed as a
carcinogen by IARC, NTP and OSHA.
12. ECOLOGICAL INFORMATION
Ecotoxicity: None known.
Mobility: Does not dissolve in water.
Persistence and degradability: Not determined.
Bioaccumulative potential: Unknown.
13. DISPOSAL CONSIDERATIONS
Dispose off in accordance with appropriate National and local regulations.
Page 5 of 5
14. TRANSPORT INFORMATION
UN Number, ADR/RID:
IMDG/ICAO:
MONT-BLANC:
Not restricted for transportation.
Not restricted for transportation.
Not restricted for transportation.
15. REGULATORY INFORMATION
Label Elements [Regulations (EC) No. 1272/2008]
None Not classified as hazardous
Inventory Listed In:
China IECSC, EU EINECS, US TSCA, Canada DSL, Japan ENCS, Korea KECL, Taiwan NECI,
Philippine PICCS, Australia AICS, New Zealand NZIoC
16. OTHER INFORMATION
Text of R phrases referred to under headings 3
R45 May cause cancer
R68 Possible risk of irreversible effects
R23/24/25 Toxic by inhalation, in contact and if s wallowed
R34 Causes burns
R43 May cause sensitization by skin contact
H317 May cause an allergic skin reaction
Text of H phrases referred to under headings 3
H350 May cause cancer
H341 Suspected of causing genetic defects
H331 Toxic if inhaled
H311 Toxic in contact with skin
H301 Toxic if swallowed
H314 Causes severe skin burns and eye damage
H317 May cause an allergic skin reaction
Product category:
Phenoset microspheres is an article fulfilling the exemption of substance registration requirements under
REACH article 7(1).
Text on Label:
CAUTION! May undergo spontaneous smouldering if stored or heated in bulk above 35C under conditions
allowing air ingress to the product.
Store in cool, well-ventilated area.
Do not store in the sun
Do not dry in package refer special drying instructions.
FOR INDUSTRIAL USE ONLY
Recommended usage and restrictions:
Please consult the product and/or applications information bulletins for this product.
Disclaimer
The information contains herein is correct to the best of our knowledge. We disclaim any liability as to the
recommendations or completeness of the information. The final evaluation on the fitness of use lies on the
user digression. All material has hidden hazards and should be used with extreme care. Even though
various hazards had been listed herein, we do not warranty that those are the only existing hazards.
Revision Date: 03 April 2015
Revision Summary: Section 3 classification of formaldehyde.
Section 16 Text of R- and H-phrases
