by | Sep 27, 2025
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy
themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or
fitness, nor is protection from any law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of
our materials and in no event shall we be liable for special, incidental or consequential damages
5/17/2018 ISO 9001:2015 Registered Company
DURA-KOTE GEL COATS
406-007
LIME GREEN TOOLING GEL COAT
World Class Coatings
Technology
____________________________________________________________________________________________
Dura-kote 406-007 Tooling Gel Coat is designed for fiber glass mold manufacturing. Easy application
and good surface properties make these products suitable for a wide range of tooling applications. The
standard colors are orange, black and green. Custom colors are available and all colors are heavy
metal free.
PERFORMANCE BENEFITS
High Gloss
Good Hardness
Excellent chemical and abrasion resistance
Minimum distortion
TYPICAL LIQUID GEL COAT PROPERTIES
Gel time @77F, 2% MEKP: 7 -10 mins
Viscosity @ 77F, 20RPM # spindle: 3200 250cps
Thixotropic Index: 5 plus
Weight per gallon: 8.8 lbs.
Maximum VOC < 46 weight %
Maximum HAPs < 41 weight %
Maximum monomer content < 41weight %
(Local regulations vary. Consult your local AQMD to determine actual VOC in use)
CURED FILM PROPERTIES
Barcol Hardness: 34 +
HDT 200 F +
USAGE GUIDELINES
Mix this product for at least 5 minutes at low speed prior to use
MEKP levels should be kept at 2%
Do not apply gel coats below 64F
Apply using airless spray at a the minimum pressure required to achieve atomization
Film thickness must be between 15 mils and 25 mils in 2-3 passes with a short flash off time
between passes
SHELF LIFE
This product is stable for six months from date of production when stored away from sunlight at no more
than 77F. Extended storage beyond three months will result in some drift in gel times and viscosity.
Elevated temperatures will reduce shelf life further
by | Sep 27, 2025
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy
themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or
fitness, nor is protection from any law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of
our materials and in no event shall we be liable for special, incidental or consequential damages
5/17/2018 ISO 9001:2015 Registered Company
DURA-KOTE GEL COATS
406-007
LIME GREEN TOOLING GEL COAT
World Class Coatings
Technology
____________________________________________________________________________________________
Dura-kote 406-007 Tooling Gel Coat is designed for fiber glass mold manufacturing. Easy application
and good surface properties make these products suitable for a wide range of tooling applications. The
standard colors are orange, black and green. Custom colors are available and all colors are heavy
metal free.
PERFORMANCE BENEFITS
High Gloss
Good Hardness
Excellent chemical and abrasion resistance
Minimum distortion
TYPICAL LIQUID GEL COAT PROPERTIES
Gel time @77F, 2% MEKP: 7 -10 mins
Viscosity @ 77F, 20RPM # spindle: 3200 250cps
Thixotropic Index: 5 plus
Weight per gallon: 8.8 lbs.
Maximum VOC < 46 weight %
Maximum HAPs < 41 weight %
Maximum monomer content < 41weight %
(Local regulations vary. Consult your local AQMD to determine actual VOC in use)
CURED FILM PROPERTIES
Barcol Hardness: 34 +
HDT 200 F +
USAGE GUIDELINES
Mix this product for at least 5 minutes at low speed prior to use
MEKP levels should be kept at 2%
Do not apply gel coats below 64F
Apply using airless spray at a the minimum pressure required to achieve atomization
Film thickness must be between 15 mils and 25 mils in 2-3 passes with a short flash off time
between passes
SHELF LIFE
This product is stable for six months from date of production when stored away from sunlight at no more
than 77F. Extended storage beyond three months will result in some drift in gel times and viscosity.
Elevated temperatures will reduce shelf life further
by | Sep 27, 2025
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy
themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or
fitness, nor is protection from any law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of
our materials and in no event shall we be liable for special, incidental or consequential damages
5/17/2018 ISO 9001:2015 Registered Company
DURA-KOTE GEL COATS
406-007
LIME GREEN TOOLING GEL COAT
World Class Coatings
Technology
____________________________________________________________________________________________
Dura-kote 406-007 Tooling Gel Coat is designed for fiber glass mold manufacturing. Easy application
and good surface properties make these products suitable for a wide range of tooling applications. The
standard colors are orange, black and green. Custom colors are available and all colors are heavy
metal free.
PERFORMANCE BENEFITS
High Gloss
Good Hardness
Excellent chemical and abrasion resistance
Minimum distortion
TYPICAL LIQUID GEL COAT PROPERTIES
Gel time @77F, 2% MEKP: 7 -10 mins
Viscosity @ 77F, 20RPM # spindle: 3200 250cps
Thixotropic Index: 5 plus
Weight per gallon: 8.8 lbs.
Maximum VOC < 46 weight %
Maximum HAPs < 41 weight %
Maximum monomer content < 41weight %
(Local regulations vary. Consult your local AQMD to determine actual VOC in use)
CURED FILM PROPERTIES
Barcol Hardness: 34 +
HDT 200 F +
USAGE GUIDELINES
Mix this product for at least 5 minutes at low speed prior to use
MEKP levels should be kept at 2%
Do not apply gel coats below 64F
Apply using airless spray at a the minimum pressure required to achieve atomization
Film thickness must be between 15 mils and 25 mils in 2-3 passes with a short flash off time
between passes
SHELF LIFE
This product is stable for six months from date of production when stored away from sunlight at no more
than 77F. Extended storage beyond three months will result in some drift in gel times and viscosity.
Elevated temperatures will reduce shelf life further
by | Sep 27, 2025
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy
themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or
fitness, nor is protection from any law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of
our materials and in no event shall we be liable for special, incidental or consequential damages
5/17/2018 ISO 9001:2015 Registered Company
DURA-KOTE GEL COATS
406-007
LIME GREEN TOOLING GEL COAT
World Class Coatings
Technology
____________________________________________________________________________________________
Dura-kote 406-007 Tooling Gel Coat is designed for fiber glass mold manufacturing. Easy application
and good surface properties make these products suitable for a wide range of tooling applications. The
standard colors are orange, black and green. Custom colors are available and all colors are heavy
metal free.
PERFORMANCE BENEFITS
High Gloss
Good Hardness
Excellent chemical and abrasion resistance
Minimum distortion
TYPICAL LIQUID GEL COAT PROPERTIES
Gel time @77F, 2% MEKP: 7 -10 mins
Viscosity @ 77F, 20RPM # spindle: 3200 250cps
Thixotropic Index: 5 plus
Weight per gallon: 8.8 lbs.
Maximum VOC < 46 weight %
Maximum HAPs < 41 weight %
Maximum monomer content < 41weight %
(Local regulations vary. Consult your local AQMD to determine actual VOC in use)
CURED FILM PROPERTIES
Barcol Hardness: 34 +
HDT 200 F +
USAGE GUIDELINES
Mix this product for at least 5 minutes at low speed prior to use
MEKP levels should be kept at 2%
Do not apply gel coats below 64F
Apply using airless spray at a the minimum pressure required to achieve atomization
Film thickness must be between 15 mils and 25 mils in 2-3 passes with a short flash off time
between passes
SHELF LIFE
This product is stable for six months from date of production when stored away from sunlight at no more
than 77F. Extended storage beyond three months will result in some drift in gel times and viscosity.
Elevated temperatures will reduce shelf life further
by | Sep 27, 2025
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy
themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or
fitness, nor is protection from any law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of
our materials and in no event shall we be liable for special, incidental or consequential damages
5/17/2018 ISO 9001:2015 Registered Company
DURA-KOTE GEL COATS
406-007
LIME GREEN TOOLING GEL COAT
World Class Coatings
Technology
____________________________________________________________________________________________
Dura-kote 406-007 Tooling Gel Coat is designed for fiber glass mold manufacturing. Easy application
and good surface properties make these products suitable for a wide range of tooling applications. The
standard colors are orange, black and green. Custom colors are available and all colors are heavy
metal free.
PERFORMANCE BENEFITS
High Gloss
Good Hardness
Excellent chemical and abrasion resistance
Minimum distortion
TYPICAL LIQUID GEL COAT PROPERTIES
Gel time @77F, 2% MEKP: 7 -10 mins
Viscosity @ 77F, 20RPM # spindle: 3200 250cps
Thixotropic Index: 5 plus
Weight per gallon: 8.8 lbs.
Maximum VOC < 46 weight %
Maximum HAPs < 41 weight %
Maximum monomer content < 41weight %
(Local regulations vary. Consult your local AQMD to determine actual VOC in use)
CURED FILM PROPERTIES
Barcol Hardness: 34 +
HDT 200 F +
USAGE GUIDELINES
Mix this product for at least 5 minutes at low speed prior to use
MEKP levels should be kept at 2%
Do not apply gel coats below 64F
Apply using airless spray at a the minimum pressure required to achieve atomization
Film thickness must be between 15 mils and 25 mils in 2-3 passes with a short flash off time
between passes
SHELF LIFE
This product is stable for six months from date of production when stored away from sunlight at no more
than 77F. Extended storage beyond three months will result in some drift in gel times and viscosity.
Elevated temperatures will reduce shelf life further
by | Sep 27, 2025
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy themselves as to
contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or fitness, nor is protection from any
law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of our materials and in no event shall we be liable for
special , incidental or consequential damages
7/24/2023 ISO 9001:2015 Registered Company
DURA-KOTE GEL COATS
3XX-XXX
World Class Coatings
Technology
ADVANTAGE LOW VOC COLOR GEL COAT
____________________________________________________________________________________________
Dura-kote Advantage gel coat all colors is an ISO/NPG polyester gel coat. Dura-kote Advantage gel coats
offer excellent UV stability and chemical resistance and are suitable for a wide range of applications including
boats, recreational vehicles and a variety of industrial applications.
PERFORMANCE BENEFITS
Good sag resistance
Excellent flow and leveling
Resistance to pinholing
Superior air release
Excellent UV stability
Good impact resistance
TYPICAL LIQUID GEL COAT PROPERTIES
Gel time @77 F, 2% MEKP . 7-11 minutes
Viscosity @ 77 F, 20RPM #4 spindle … 5,200-5800 cps
Thixotropic Index .5.5 minimum
Weight per gallon ..10 -11lbs/gal (color dependent)
Maximum VOC …<33 % by weight volatile for colors
<30% by weight for whites and off whites
(Local regulations vary. Consult your local AQMD to determine actual VOC in use)
USAGE GUIDELINES
Mix this product for at least 5 minutes at low speed prior to use
MEKP levels should be kept at 2%
Do not apply gel coats below 64 F
Apply using airless spray at a the lowest possible pressure
Film thickness must be between 15mils and 25mils in 2-3 passes with a short flash off time between passes
SHELF LIFE
This product is stable for six months from date of production when stored away from sunlight at no more than 77F.
Extended storage will result in some drift in gel times and viscosity. Elevated temperatures will reduce shelf life
further
by | Sep 27, 2025
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy themselves as to
contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or fitness, nor is protection from any
law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of our materials and in no event shall we be liable for
special, incidental or consequential damages
7/28/2023 ISO 9001:2015 Registered Company
DURA-KOTE GEL COATS
23XX-XXX
World Class Coatings
Technology
ELITE LOW VOC COLOR GEL COAT
____________________________________________________________________________________________
Dura-kote Elite gel coat all colors is a low VOC, acrylic modified ISO/NPG polyester gel coat. Dura-Kote
Elite gel coats offer a further improvement in UV stability compared to the Advantage line without compromising
other properties. Elite gel coats should be used where color stability is a primary concern and are suitable for a
wide range of applications including boats, recreational vehicles and a variety of industrial applications.
PERFORMANCE BENEFITS
Good sag resistance
Excellent flow and leveling
Resistance to pinholing
Superior air release
Excellent UV stability
Good impact resistance
TYPICAL LIQUID GEL COAT PROPERTIES
Gel time @77F, 2% MEKP . 7-11 minutes
Viscosity @ 77F, 20RPM #4 spindle … 5,200-5,800cps
Thixotropic Index . 5.5 minimum
Weight per gallon .. 10+1 lbs/gal (color dependent)
Maximum VOC … <33% by weight volatile
<30% by weight for whites and off whites
(Local regulations vary. Consult your local AQMD to determine actual VOC in use)
USAGE GUIDELINES
Mix this product for at least 5 minutes at low speed prior to use
MEKP levels should be kept at 2%
Do not apply gel coats below 64F
Apply using airless spray at a the lowest possible pressure
Film thickness must be between 15mils and 25mils in 2-3 passes with a short flash off time between passes
SHELF LIFE
This product is stable for six months from date of production when stored away from sunlight at no more than 77F.
Extended storage will result in some drift in gel times and viscosity. Elevated temperatures will reduce shelf life
further
by | Sep 27, 2025
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy themselves as to
contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or fitness, nor is protection from any
law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of our materials and in no event shall we be liable for
special , incidental or consequential damages
7/24/2023 ISO 9001:2015 Registered Company
DURA-KOTE GEL COATS
3XX-XXX
World Class Coatings
Technology
ADVANTAGE LOW VOC COLOR GEL COAT
____________________________________________________________________________________________
Dura-kote Advantage gel coat all colors is an ISO/NPG polyester gel coat. Dura-kote Advantage gel coats
offer excellent UV stability and chemical resistance and are suitable for a wide range of applications including
boats, recreational vehicles and a variety of industrial applications.
PERFORMANCE BENEFITS
Good sag resistance
Excellent flow and leveling
Resistance to pinholing
Superior air release
Excellent UV stability
Good impact resistance
TYPICAL LIQUID GEL COAT PROPERTIES
Gel time @77 F, 2% MEKP . 7-11 minutes
Viscosity @ 77 F, 20RPM #4 spindle … 5,200-5800 cps
Thixotropic Index .5.5 minimum
Weight per gallon ..10 -11lbs/gal (color dependent)
Maximum VOC …<33 % by weight volatile for colors
<30% by weight for whites and off whites
(Local regulations vary. Consult your local AQMD to determine actual VOC in use)
USAGE GUIDELINES
Mix this product for at least 5 minutes at low speed prior to use
MEKP levels should be kept at 2%
Do not apply gel coats below 64 F
Apply using airless spray at a the lowest possible pressure
Film thickness must be between 15mils and 25mils in 2-3 passes with a short flash off time between passes
SHELF LIFE
This product is stable for six months from date of production when stored away from sunlight at no more than 77F.
Extended storage will result in some drift in gel times and viscosity. Elevated temperatures will reduce shelf life
further
by | Sep 27, 2025
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy themselves as to
contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or fitness, nor is protection from any
law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of our materials and in no event shall we be liable for
special , incidental or consequential damages
Last updated 16 June 2023 ISO 9001:2015 Registered Company
DURA-KOTE GEL COATS
314-006
World Class Coatings
Technology
ADVANTAGE LOW VOC WHITE GEL COAT
____________________________________________________________________________________________
Dura-kote 314-006 is a low VOC white ISO/NPG polyester gel coat. Dura-kote Advantage gel coats offer
excellent UV stability and chemical resistance and are suitable for a wide range of applications including boats,
recreational vehicles and a variety of industrial applications.
PERFORMANCE BENEFITS
Good sag resistance
Excellent flow and leveling
Resistance to pinholing
Superior air release
Outstanding whiteness
Excellent UV stability
Good impact resistance
TYPICAL LIQUID GEL COAT PROPERTIES
Gel time @77F, 2% MEKP .6.5 -10.5 minutes
Viscosity @ 77F, 20RPM #4 spindle … 4,500 -6,000 cps
Thixotropic Index .5.5 minimum
Weight per gallon ..11.3 lbs/gal
Maximum VOC …<30% by weight volatile
(Local regulations vary. Consult your local AQMD to determine actual VOC in use
USAGE GUIDELINES
Mix this product for at least 5 minutes at low speed prior to use
MEKP levels should be kept at 2%
Do not apply gel coats below 64F
Apply using airless spray at a the lowest possible pressure
Film thickness must be between 15mils and 25mils in 2-3 passes with a short flash off time between passes
SHELF LIFE
This product is stable for three months from date of production when stored away from sunlight at no more than
77F. Extended storage will result in some drift in gel times and viscosity. Elevated temperatures will reduce shelf
life further
by | Sep 27, 2025
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy themselves as to
contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or fitness, nor is protection from any
law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of our materials and in no event shall we be liable for
special , incidental or consequential damages
Last updated 16 June 2023 ISO 9001:2015 Registered Company
DURA-KOTE GEL COATS
314-006
World Class Coatings
Technology
ADVANTAGE LOW VOC WHITE GEL COAT
____________________________________________________________________________________________
Dura-kote 314-006 is a low VOC white ISO/NPG polyester gel coat. Dura-kote Advantage gel coats offer
excellent UV stability and chemical resistance and are suitable for a wide range of applications including boats,
recreational vehicles and a variety of industrial applications.
PERFORMANCE BENEFITS
Good sag resistance
Excellent flow and leveling
Resistance to pinholing
Superior air release
Outstanding whiteness
Excellent UV stability
Good impact resistance
TYPICAL LIQUID GEL COAT PROPERTIES
Gel time @77F, 2% MEKP .6.5 -10.5 minutes
Viscosity @ 77F, 20RPM #4 spindle … 4,500 -6,000 cps
Thixotropic Index .5.5 minimum
Weight per gallon ..11.3 lbs/gal
Maximum VOC …<30% by weight volatile
(Local regulations vary. Consult your local AQMD to determine actual VOC in use
USAGE GUIDELINES
Mix this product for at least 5 minutes at low speed prior to use
MEKP levels should be kept at 2%
Do not apply gel coats below 64F
Apply using airless spray at a the lowest possible pressure
Film thickness must be between 15mils and 25mils in 2-3 passes with a short flash off time between passes
SHELF LIFE
This product is stable for three months from date of production when stored away from sunlight at no more than
77F. Extended storage will result in some drift in gel times and viscosity. Elevated temperatures will reduce shelf
life further
