TECHNICAL DATA SHEE T
VACFILM 200G
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VF200G_02.21_Issue1
VACFILM 200G
Vacuum bagging film
Ideally suited to wind energy applications
Features and Benefits
Co-extruded vacuum bagging film which is less
sensitive to moisture than mono- nylon films.
Suitable for use in extremely low and extremely high
humidity.
Ideal for wet lay-up and infusion processes.
Compatible with most commercially available resin
systems, including phenolic resins.
Not suitable for autoclave use.
PROPERTIES
Maximum use
temperature
120 C (248 F)
Color Green
Tensile strength at break
(ASTM D882)
Transverse direction Machine
direction
25MPa
35MPa
3626PSI
5076PSI
Elongation at break
(ASTM D882)
Transverse direction Machine
direction
350%
300%
Yield 12.76m /kg 6.92yd /lb
AVAILABILITY
Thickness 80 m 0.003in
Roll weight Up to 45kg Up to 99lbs
Widths Up to 12m (open) Up to 472in (open)
Formats available V sheet, sheet, gusset centre slit and C-fold (tube available to order)
STORAGE
Vacfilm 200G is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of use is
therefore an important factor for successful performance. The higher the moisture content the more flexible they become.
Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
TECHNICAL DATA SHEE T
VACFILM 200G
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VF200G_02.21_Issue1
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.