TECHNICAL DATA SHEE T
VACFILM 800G
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VF800G_02.21_Issue1
VACFILM 800G
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Highly conformable, transparent, co-polymer film
which will remain soft and pliable during cures up
to 177 C (351 F).
Suitable for use with complex tooling geometry.
Not recommended for use with polyester or
vinylester resin systems.
PROPERTIES
Maximum Use Temperature 204 C (400 F)
Color Green
Tensile strength at break (ASTM D882)
Transverse direction 90MPa 13053PSI
Machine direction 90MPa 13053PSI
Elongation at break (ASTM D882)
Transverse direction
Machine direction
500%
550%
Yield
17.54m /kg (50 m) 9.44yd /lb (0.001 )
11.76m /kg (75 m) 6.38yd /lb (0.002 )
8.77m /kg (100 m) 4.72yd /lb (0.004 )
AVAILABILITY
Thickness 50, 75 and 100 m 0.002, 0.003 and 0.004in
Roll weight Up to 150kg Up to 330lbs
Widths Up to 7m Up to 275in
Formats available Lay-flat tube, V sheet, sheet, gusseted, C-fold
STORAGE
Vacfilm 800G is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of use
is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture content
the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product SDS for safe handling and personal protective equipment recomendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.