Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Release Fabrics/Peel Plies
Release Ease 234 TFP, Release Ease 234 TFP-HP, Release Ease 234 TFP-1, Release
Ease 234 TFNP, Release Ease 236 TFNP, TFG075 series, TFG125 series, TFG250 series
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Release fabrics/ Peel plies
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication Standard
(29 CFR 1910.1200).
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 2 of 8
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Inhalation of fumes
from burning or heating may cause polymer fume fever, a temporary flu-like illness with fever
and chills. Processing, e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid
inhalation of dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Article: Release fabrics/ Peel plies
Material type: PTFE coated fibreglass fabric
Release Coating: PTFE
4. First aid measures
In case of inhalation: In case of inhalation of decomposition products, affected person should be moved into fresh air
and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:Thoroughly wash skin with soap and water. In case of skin irritation, consult a physician.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of flowing
water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent symptoms,
consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of troubles.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released mist or
vapors can irritate the respiratory tracts.
Inhalation of fumes from burning or heating may cause polymer fume fever, a temporary flu-like
illness with fever and chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort, shortage
of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear after 2 hours and
decline within the next 36 to 48 hours. In case of prolonged exposure: Possible danger of
damage to liver and kidneys.
After contact with skin: itching redness of the skin and oedema (swelling).
The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical irritation.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:No data available
Auto-ignition temperature:No data available
Suitable extinguishing media:Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 3 of 8
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at elevated
temperatures.
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon monoxide
and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use water spray jet to knock down vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions: Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation
and contact with skin and eyes. Wear appropriate protective equipment. Keep unprotected
people away. Ensure adequate ventilation, especially in confined areas.
Environmental precautions:Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up: Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the formation
of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with skin and eyes.
Wear appropriate protective equipment. Keep unprotected people away. When using do not eat,
drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Do not freeze. Store at
room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 4 of 8
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection: At processing (recommended): Safety glasses in accordance with OSHA 29 CFR: 1910.133 or
ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise when
handling the product. If the concentration is exceeded, self-contained breathing apparatus must
be used.
General hygiene considerations:Handle in accordance with good industrial hygiene and safety practice. Wash hands before
breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range: No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: insoluble
Partition coefficient: n-octanol/water: No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 5 of 8
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid: Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the formation
of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon monoxide
and carbon dioxide.
Thermal decomposition: No data available
11. Toxicological information
Toxicological tests
Toxicological effects: Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting, sawing or
grinding, can produce particles and dust. Dust may irritate airways and cause bronchitis
symptoms.
Hazardous decomposition products:
Hydrogen fluoride, Hexafluoropropene, Carbonyl difluoride.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 6 of 8
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released mist or
vapors can irritate the respiratory tracts.
Inhalation of fumes from burning or heating may cause polymer fume fever, a temporary flu-like
illness with fever and chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort, shortage
of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear after 2 hours and
decline within the next 36 to 48 hours. In case of prolonged exposure: Possible danger of
damage to liver and kidneys.
After contact with skin: itching redness of the skin and oedema (swelling).
The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical irritation.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information: Avoid release to the environment.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Package
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in the
same way as the substance itself. Non-contaminated packages may be recycled. Do not
remove label until container is thoroughly cleaned.
14. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:not applicable
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 7 of 8
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA inventory
listing requirements.
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TRGS: Technical Rules for Hazardous Substances
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: General revision
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 8 of 8
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional
precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate
workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this
safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT