Safety Data Sheet
ELASTOCAST R7-2.5-35S NAT
Revision date : 2018/06/28 Page: 1/9
Version: 2.0 (30576825/SDS_GEN_US/EN)
1. Identification
Product identifier used on the label
ELASTOCAST R7-2.5-35S NAT
Recommended use of the chemical and restriction on use
Recommended use*: polyurethane component; industrial chemicals
Suitable for use in industrial sector: Polymers industry; chemical industry
* The Recommended use identified for this product is provided solely to comply with a Federal requirement and is not part of
the seller’s published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or
implied, including by incorporation into or reference in the seller’s sales agreement.
Details of the supplier of the safety data sheet
Company:
BASF CORPORATION
100 Park Avenue
Florham Park, NJ 07932, USA
Telephone: +1 973 245-6000
Emergency telephone number
CHEMTREC: 1-800-424-9300
BASF HOTLINE: 1-800-832-HELP (4357)
Other means of identification
Chemical family: resin
Synonyms: Urethane System Resin Component
2. Hazards Identification
According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200
Classification of the product
Skin Sens. 1B Skin sensitization
Label elements
Pictogram:
Safety Data Sheet
ELASTOCAST R7-2.5-35S NAT
Revision date : 2018/06/28 Page: 2/9
Version: 2.0 (30576825/SDS_GEN_US/EN)
Signal Word:
Warning
Hazard Statement:
H317 May cause an allergic skin reaction.
Precautionary Statements (Prevention):
P280 Wear protective gloves.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
Precautionary Statements (Response):
P333 + P311 If skin irritation or rash occurs: Call a POISON CENTER or
doctor/physician.
P303 + P352 IF ON SKIN (or hair): Wash with plenty of soap and water.
P362 + P364 Take off contaminated clothing and wash it before reuse.
Precautionary Statements (Disposal):
P501 Dispose of contents/container to hazardous or special waste collection
point.
Hazards not otherwise classified
No specific dangers known, if the regulations/notes for storage and handling are considered.
3. Composition / Information on Ingredients
According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200
CAS Number Weight % Chemical name
13674-84-5 >= 10.0 – < 15.0% tris(2-chloro-1-methylethyl)phosphate
26316-40-5 >= 10.0 – < 15.0% Ethylenediamine, ethoxylated and propoxylated
May contain substance of animal origin., May contain substance of plant origin.
4. First-Aid Measures
Description of first aid measures
General advice:
Remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention.
If on skin:
Wash thoroughly with soap and water.
Safety Data Sheet
ELASTOCAST R7-2.5-35S NAT
Revision date : 2018/06/28 Page: 3/9
Version: 2.0 (30576825/SDS_GEN_US/EN)
If in eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
If swallowed:
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Most important symptoms and effects, both acute and delayed
Symptoms: The most important known symptoms and effects are described in the labelling (see
section 2) and/or in section 11.
Hazards: No hazards anticipated.
Indication of any immediate medical attention and special treatment needed
Note to physician
Treatment: Treat according to symptoms (decontamination, vital functions), no
known specific antidote.
5. Fire-Fighting Measures
Extinguishing media
Suitable extinguishing media:
water spray, dry powder, carbon dioxide, foam
Special hazards arising from the substance or mixture
Hazards during fire-fighting:
No particular hazards known.
Advice for fire-fighters
Protective equipment for fire-fighting:
Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
6. Accidental release measures
Further accidental release measures:
High risk of slipping due to leakage/spillage of product.
Personal precautions, protective equipment and emergency procedures
Use personal protective clothing.
Environmental precautions
Do not empty into drains. Do not discharge into the subsoil/soil.
Methods and material for containment and cleaning up
Spills should be contained, solidified, and placed in suitable containers for disposal.
Safety Data Sheet
ELASTOCAST R7-2.5-35S NAT
Revision date : 2018/06/28 Page: 4/9
Version: 2.0 (30576825/SDS_GEN_US/EN)
7. Handling and Storage
Precautions for safe handling
Ensure thorough ventilation of stores and work areas. Protect against moisture. Product should not
be mixed with air above atmospheric pressure for leak testing or any other purpose. Use dry nitrogen
to transfer or leak test equipment pressurized with product.
Protection against fire and explosion:
No special precautions necessary.
Conditions for safe storage, including any incompatibilities
Segregate from foods and animal feeds. Segregate from acids. Segregate from oxidants.
Suitable materials for containers: Carbon steel (Iron), High density polyethylene (HDPE), Low
density polyethylene (LDPE), Stainless steel 1.4301 (V2)
Further information on storage conditions: Containers should be stored tightly sealed in a dry place.
Storage stability:
Storage temperature: 16 - 27 C
8. Exposure Controls/Personal Protection
No occupational exposure limits known.
Advice on system design:
Provide local exhaust ventilation to control vapours/mists.
Personal protective equipment
Respiratory protection:
Wear a NIOSH-certified (or equivalent) organic vapour/particulate respirator as needed.
Hand protection:
Chemical resistant protective gloves
Eye protection:
Wear face shield or tightly fitting safety goggles (chemical goggles) if splashing hazard exists.
Body protection:
Standard work clothes and shoes.
General safety and hygiene measures:
Avoid contact with skin. Handle in accordance with good industrial hygiene and safety practice. Wear
protective clothing as necessary to prevent contact. Avoid inhalation of vapours/mists. Wash soiled
clothing immediately.
9. Physical and Chemical Properties
Form: liquid
Odour: mild, amine-like
Odour threshold: No applicable information available.
Colour: amber
pH value: > 7.0
melting range: < -5.00 C
Safety Data Sheet
ELASTOCAST R7-2.5-35S NAT
Revision date : 2018/06/28 Page: 5/9
Version: 2.0 (30576825/SDS_GEN_US/EN)
Boiling point: 100.00 C
( 760.000000 mmHg)
Sublimation point: No applicable information available.
Flash point: > 94.00 C (open cup)
Flammability: not flammable
Lower explosion limit: 50.00 %(V)
Upper explosion limit: 90.00 %(V)
Autoignition: > 200.00 C
Vapour pressure: 0.10 mmHg
( 20.00 C)
Density: 8.8000 lb/USg
( 25.00 C)
Relative density: No applicable information available.
Vapour density: No applicable information available.
Partitioning coefficient n-
octanol/water (log Pow):
Unspecified
Self-ignition
temperature:
No self ignition was observed up to
the specified temperature.
Thermal decomposition: No decomposition if stored and handled as
prescribed/indicated.
Viscosity, dynamic: 800.000 mPa.s
( 23.00 C)
Viscosity, kinematic: No applicable information available.
Solubility in water: soluble
Miscibility with water: slightly soluble
Solubility (quantitative): No applicable information available.
Solubility (qualitative): No applicable information available.
Evaporation rate: Value can be approximated from
Henry’s Law Constant or vapor
pressure.
Other Information: If necessary, information on other physical and chemical
parameters is indicated in this section.
10. Stability and Reactivity
Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
Corrosion to metals:
No corrosive effect on metal.
Oxidizing properties:
Not an oxidizer.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
No hazardous reactions if stored and handled as prescribed/indicated.
Conditions to avoid
Temperature: < 0 degrees Celsius
Incompatible materials
acids, oxidizing agents, isocyanates
Safety Data Sheet
ELASTOCAST R7-2.5-35S NAT
Revision date : 2018/06/28 Page: 6/9
Version: 2.0 (30576825/SDS_GEN_US/EN)
Hazardous decomposition products
Decomposition products:
Hazardous decomposition products: carbon monoxide, carbon dioxide, nitrogen oxide, hydrogen
cyanide
Thermal decomposition:
No decomposition if stored and handled as prescribed/indicated.
11. Toxicological information
Primary routes of exposure
Routes of entry for solids and liquids are ingestion and inhalation, but may include eye or skin
contact. Routes of entry for gases include inhalation and eye contact. Skin contact may be a route
of entry for liquefied gases.
Acute Toxicity/Effects
Acute toxicity
Assessment of acute toxicity: No known acute effects.
Oral
No applicable information available.
Inhalation
No applicable information available.
Dermal
No applicable information available.
Assessment other acute effects
Assessment of STOT single:
Based on the available information there is no specific target organ toxicity to be expected after a
single exposure.
Origin of data: expert judgement
Irritation / corrosion
Assessment of irritating effects: No irritation is expected under intended use and appropriate
handling.
Sensitization
Assessment of sensitization: Sensitization after skin contact possible.
Aspiration Hazard
No aspiration hazard expected.
Chronic Toxicity/Effects
Repeated dose toxicity
Assessment of repeated dose toxicity: Repeated oral uptake of the substance did not cause
substance-related effects. Repeated inhalative uptake of the substance did not cause substance-
related effects. Repeated dermal uptake of the substance did not cause substance-related effects.
Genetic toxicity
Safety Data Sheet
ELASTOCAST R7-2.5-35S NAT
Revision date : 2018/06/28 Page: 7/9
Version: 2.0 (30576825/SDS_GEN_US/EN)
Assessment of mutagenicity: The chemical structure does not suggest a specific alert for such an
effect. No applicable information available.
Carcinogenicity
Assessment of carcinogenicity: The chemical structure does not suggest a specific alert for such an
effect. No applicable information available.
Reproductive toxicity
Assessment of reproduction toxicity: The chemical structure does not suggest a specific alert for
such an effect. No applicable information available.
Teratogenicity
Assessment of teratogenicity: The chemical structure does not suggest a specific alert for such an
effect. No applicable information available.
Other Information
The product has not been tested. The statement has been derived from the properties of the
individual components.
Symptoms of Exposure
The most important known symptoms and effects are described in the labelling (see section 2)
and/or in section 11.
Medical conditions aggravated by overexposure
Data available do not indicate that there are medical conditions that are generally recognized as
being aggravated by exposure to this substance/product.
12. Ecological Information
Toxicity
Aquatic toxicity
Assessment of aquatic toxicity:
There is a high probability that the product is not acutely harmful to aquatic organisms. The product
has not been tested. The statement has been derived from the properties of the individual
components.
Persistence and degradability
Assessment biodegradation and elimination (H2O)
Poorly biodegradable.
Elimination information
Poorly biodegradable.
Bioaccumulative potential
Assessment bioaccumulation potential
Does not significantly accumulate in organisms.
Mobility in soil
Assessment transport between environmental compartments
Adsorption to solid soil phase is not expected.
Safety Data Sheet
ELASTOCAST R7-2.5-35S NAT
Revision date : 2018/06/28 Page: 8/9
Version: 2.0 (30576825/SDS_GEN_US/EN)
Additional information
Adsorbable organically-bound halogen (AOX):
This product contains no organically-bound halogen.
Other ecotoxicological advice:
The product has not been tested. Do not discharge product into the environment without control.
13. Disposal considerations
Waste disposal of substance:
Incinerate in a licensed facility. Dispose of in a licensed facility. Do not discharge substance/product
into sewer system.
Container disposal:
Steel drums must be emptied and can be sent to a licensed drum reconditioner for reuse, a scrap
metal dealer or an approved landfill. Do not attempt to refill or clean containers since residue is
difficult to remove. Under no circumstances should empty drums be burned or cut open with gas or
electric torch as toxic decomposition products may be liberated. Do not reuse empty containers.
14. Transport Information
Land transport
USDOT
Not classified as a dangerous good under transport regulations
Sea transport
IMDG
Not classified as a dangerous good under transport regulations
Air transport
IATA/ICAO
Not classified as a dangerous good under transport regulations
15. Regulatory Information
Federal Regulations
Registration status:
Chemical TSCA, US released / listed
EPCRA 311/312 (Hazard categories): Refer to SDS section 2 for GHS hazard classes applicable
for this product.
Safe Drinking Water & Toxic Enforcement Act, CA Prop. 65:
WARNING: This product can expose you to chemicals including ETHYLENE OXIDE, which is known
to the State of California to cause cancer and birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
Safety Data Sheet
ELASTOCAST R7-2.5-35S NAT
Revision date : 2018/06/28 Page: 9/9
Version: 2.0 (30576825/SDS_GEN_US/EN)
NFPA Hazard codes:
Health: 1 Fire: 1 Reactivity: 1 Special:
HMIS III rating
Health: 1 Flammability: 1 Physical hazard: 1
16. Other Information
SDS Prepared by:
BASF NA Product Regulations
SDS Prepared on: 2018/06/28
We support worldwide Responsible Care initiatives. We value the health and safety of our
employees, customers, suppliers and neighbors, and the protection of the environment. Our
commitment to Responsible Care is integral to conducting our business and operating our facilities in
a safe and environmentally responsible fashion, supporting our customers and suppliers in ensuring
the safe and environmentally sound handling of our products, and minimizing the impact of our
operations on society and the environment during production, storage, transport, use and disposal of
our products.
ELASTOCAST is a registered trademark of BASF Corporation or BASF SE
IMPORTANT: WHILE THE DESCRIPTIONS, DESIGNS, DATA AND INFORMATION CONTAINED
HEREIN ARE PRESENTED IN GOOD FAI TH AND BELIEVED TO BE ACCURATE , IT IS
PROVIDED FOR YOUR GUIDANCE ONLY. BECAUSE MANY FACTORS MAY AFFECT
PROCESSING OR APPLICATION/USE, WE RECOMMEND THAT YOU MAKE TESTS TO
DETERMINE THE SUITABILITY OF A PRODUCT FOR YOUR PARTICULAR PURPOSE PRIOR
TO USE. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET
FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR INFORMA TION MAY BE USED
WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE
SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED
A PART OF OUR TERMS AND CONDITIONS OF SALE. FURTHER, YOU EXPRESSLY
UNDERSTAND AND AGREE T HAT THE DESCRIPTIONS, DESIGNS, DATA, AND INFORMATION
FURNISHED BY OUR COMPANY HEREUNDER ARE GIVEN GRATIS AND WE ASSUME NO
OBLIGATION OR LIABILITY FOR THE DESCRIPTION, DESIGNS, DATA AND INFORMATION
GIVEN OR RESULTS OBTAINED, ALL SUCH BEING GIVEN AND ACCEPTE D AT YOUR RISK.
BASF CORPORATION WILL NOT MAKE ITS PRODUCTS AVAILABLE TO CUSTOMERS FOR
USE IN THE MANUFACTURE OF MEDICAL DEVICES WHICH ARE INTENDED FOR
PERMANENT IMPLANTATION IN THE HUMAN BODY OR IN PERMANENT CONTACT WITH
INTERNAL BODILY TISSUES OR FLUIDS.
END OF DATA SHEET