Safety Data Sheet
Freeman 266PSA Thermo-Stable Sheet Wax
Date of Preparation: June 20, 2022 Page 1 of 4
Section 1 Chemical Product and Company Identification
1.1 Product identifiers
Product name: Freeman 266PSA Thermo-Stable Sheet Wax
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Specialty Tooling Wax, Thermo-Stable Sheet Wax (Adhesive Back)
1.3 Details of the supplier of the safety data sheet
Freeman Manufacturing & Supply Company
1101 Moore Road, Avon, OH 44011 1.4 Emergency telephone number
Telephone (440) 934-1902 CHEMTREC (800) 424-9300
www.freemansupply.com
Section 2 Hazards Identification
2.1 Classification of the substance or mixture
Not classified according to OSHA 29 CFR 1910.1200 HCS
2.2 GHS Label elements, including precautionary statements
No label element(s) required
2.3 Hazards not otherwise classified
Molten product can cause serious burns.
Section 3 Composition/Information on Ingredients
3.1 Mixture of Substances
Proprietary mixture of synthetic waxes, resin(s), and additive(s) with a non-hazardous water-based adhesive
coating. No components need to be disclosed according to the applicable regulations.
Section 4 First Aid Measures
4.1 Description of first aid measures
Inhalation Get medical assistance if irritation develops or persists. If breathing is difficult,
move the person to fresh air. Give artificial respiration if person is not breathing.
Skin contact For thermal burns, flush or submerge effected area in cold water to dissipate heat.
Cover with clean bandage material. Do not peel material from skin. Get medical attention.
For contact at ambient temperatures, wash with soap and water.
Eye contact Immediately flush with plenty of water for at least 15 minutes.
If irritation persists, get medical attention immediately, preferably an ophthalmologist.
Ingestion If swallowed, rinse mouth with water. Never give anything by mouth to an unconscious person.
Do NOT induce vomiting. Consult a physician if necessary.
Section 5 Fire Fighting Measures
5.1 Extinguishing media
Suitable extinguishing media: Water fog, dry chemical, foam, carbon dioxide.
Unsuitable extinguishing media: Do not use a solid water stream as it may scatter and spread fire.
5.2 Special hazards arising from the substance or mixture
Unusual Fire and Explosion Hazards: Avoid generating dust; fine dust dispersed in air in sufficient
concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
See Section 10 for possible products of hazardous combustion.
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Freeman 266PSA Thermo-Stable Sheet Wax
Date of Preparation: June 20, 2022 Page 2 of 4
Section 6 Accidental Release Measures
6.1 Personal precautions, protective equipment and emergency procedures
Avoid contact with skin and eyes. Wear appropriate personal protective equipment, see Section 8.
6.2 Environmental precautions
Should not be released into the environment. Prevent product from entering drains.
6.3 Methods and materials for containment and cleaning up
Contain spillage and use clean non-sparking tools to collect material.
Shovel spillage into suitable container for disposal.
Section 7 Handling and Storage
7.1 Precautions for safe handling
Wear appropriate personal protective equipment, see Section 8. Avoid contact with skin and eyes. Wash
thoroughly with soap and water after handling. Do not use in areas without adequate ventilation. Avoid
breathing fumes. Avoid contact with molten material.
7.2 Conditions for safe storage, including any incompatibilities
Store at ambient temperatures. Keep in closed container when not in use. Keep away from ignition sources,
heat, open flames, and direct sunlight. Do not store with incompatible materials, see Section 10.
Section 8 Exposure Controls/Personal Protection
8.1 Control parameters
None established
8.2 Exposure controls
Appropriate engineering controls
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be
matched to conditions. Supplementary local exhaust ventilation may be needed in special circumstances, such
as poorly ventilated spaces, very hot processing, mechanical generation of dusts, etc.
8.3 Personal protective equipment
Eye/Face
Wear safety glasses equipped with side shields, or safety goggles.
Hands
Chemical protective gloves should not be needed when handling this material. Use gloves to protect from
mechanical injury. Use gloves with insulation for thermal protection when needed.
Skin/Body
No precautions other than clean body-covering clothing should be needed.
Respiratory
The need for respiratory protection is not anticipated under normal use conditions and with adequate
ventilation. If elevated airborne concentrations above applicable workplace exposure levels are anticipated, or
when adverse effects such as respiratory irritation has been experienced, or where indicated by your risk
assessment process, then use an approved air-purifying respirator. Use an approved air-purifying respirator
with organic vapor cartridge and particulate pre-filter when vapors are generated at increased temperatures.
Safety Stations
Make emergency eyewash stations and washing facilities available in work area.
General Hygienic Practices
Wash thoroughly after handling, and before eating, drinking or smoking. Remove contaminated clothing
promptly and clean thoroughly before reuse. Avoid contamination of food, beverages, or smoking
Freeman 266PSA Thermo-Stable Sheet Wax
Date of Preparation: June 20, 2022 Page 3 of 4
Section 9 Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical State & Color Dark yellow/medium brown solid
Odor Mild
Odor Threshold No data available
pH No data available
Melting Point >279 F (137 C)
VOC Content 0
Boiling Point No data available
Flash Point 465 F (240 C)
Evaporation rate No data available
Flammability (solid, gas) No data available
Upper/lower flammability No data available
Vapor Pressure No data available
Vapor Density No data available
Relative Density (g/cc) 0.9 0.05
Water Solubility Negligible
Coefficient: n-octanol/ water No data available
Auto-Ignition Temperature No data available
Viscosity Solid at room temperature
Explosive Properties None
Oxidizing Properties None
Section 10 Stability and Reactivity
10.1 Reactivity: No dangerous reaction known under conditions of normal use.
10.2 Chemical stability: Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions: Hazardous polymerization does not occur.
10.4 Conditions to avoid: Heat, sparks, open flame.
10.5 Incompatible materials: Strong oxidizing agents, strong acids, strong bases.
10.6 Hazardous decomposition products Carbon monoxide, carbon dioxide, n-Butyl methacrylate.
Section 11 Toxicological Information
11.1 Information on likely routes of exposure:
Acute Oral Toxicity Expected to be a low ingestion hazard.
Acute Dermal Toxicity No adverse effects anticipated from skin absorption.
Acute Inhalation Toxicity Vapors released during thermal processing may cause
respiratory irritation.
Skin Corrosion/Irritation Classification criteria not met
Serious Eye Damage/Eye Irritation Classification criteria not met
Respiratory or Skin Sensitization Classification criteria not met
Germ Cell Mutagenicity Classification criteria not met
Carcinogenicity No component of this product present at levels greater than
or equal to 0.1% is identified as an anticipated, potential,
probable, possible, known, or confirmed carcinogen.
Reproductive Toxicity Classification criteria not met
Aspiration Hazard Not relevant
Specific Target Organ Toxicity (STOT)
Single Exposure Classification criteria not met
Repeated Exposure Classification criteria not met
Freeman 266PSA Thermo-Stable Sheet Wax
Date of Preparation: June 20, 2022 Page 4 of 4
Section 12 Ecological Information
12.1 Toxicity Not expected to be harmful to aquatic organisms
12.2 Persistence and degradability No data available
12.3 Bioaccumulative potential No data available
12.4 Mobility in soil No data available
12.5 Results of PBT & vPvB assessment No data available
Section 13 Disposal Considerations
13.1 Disposal Follow applicable Federal, State, and local regulations.
Section 14 Transport Information
14.1 DOT, TDG, IMO/IMDG, IATA/ICOA: Not regulated
Section 15 Regulatory Information
15.1 Safety, health and environmental regulations/legislation specific for the product
Inventories
DSL (Canada): All components of this product are on the Canadian DSL
ENCS (Japan): On the inventory, or in compliance with the inventory
EICSC (China): On the inventory, or in compliance with the inventory
KECI (Korea): On the inventory, or in compliance with the inventory
REACH (European Union): All chemicals in this product comply with REACH regulations.
TSCA (United States): Inventory Status: All ingredients listed on the EPA TSCA inventory
SARA 311/312 Hazards Classifications: None
SARA 313 Components: This material does not contain any chemical components with known CAS numbers
that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
RCRA: In the form delivered, this product is not considered as hazardous waste, and is not subject to
reporting under the Resource Conservation and Recovery Act.
California Proposition 65: This product is not known to contain any components for which the State of
California has found to cause cancer, birth defects or other reproductive harm.
Section 16 Other Information
16.1 Disclaimer
The following supersedes Buyer s documents. SELLER MAKES NO REPRESENTATION OR WARRANTY,
EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. No statements herein are to be construed as inducements to infringe any relevant
patent. Under no circumstances shall Seller be liable for incidental, consequential or indirect damages for
alleged negligence, breach of warranty, strict of liability arising in connection with the product(s). Buyer s
sole remedy and Seller s sole liability for any claims shall be Buyer s purchase price. Data and results are
based on controlled lab work and must be confirmed by Buyer by testing for its intended conditions of use.
The product(s) has not been tested for, and is therefore not recommended for, uses for which prolonged
contact with mucous membranes, abraded skin, or blood is intended; or for uses for which implantation
within the human body is intended.
Issue Date: June 1, 2015
Revision Date: June 20, 2022