Page 1/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
47.0.18
1 Identification
Product identifier
Trade name:EA604 Resin
Article number:I604088
Application of the substance / the mixtureEpoxy resin
Details of the supplier of the safety data sheetSikaAxson US – EHS Department
Manufacturer/Supplier:
Supplier’s Name: Axson Technologies US, Inc.-SikaAxson
Headquarters:
31200 Stephenson Hwy
Madison Heights, MI 48071
USA
Manufacturing Site:
1611 Hults Drive
Eaton Rapids, MI 48827
USA
ehs-us@axson.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
2 Hazard(s) identification
Classification of the substance or mixture
GHS09 Environment
Aquatic Chronic 2H411Toxic to aquatic life with long lasting effects.
GHS07
Skin Irrit. 2 H315Causes skin irritation.
Eye Irrit. 2A H319Causes serious eye irritation.
Skin Sens. 1 H317May cause an allergic skin reaction.
Label elements
GHS label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2)
US
Page 2/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 1)
47.0.18
Hazard pictograms
GHS07
GHS09
Signal wordWarning
Hazard-determining components of labeling:
Reaction Product of Bisphenol A and Epichlorohydrin
Hazard statements
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
Toxic to aquatic life with long lasting effects.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid release to the environment.
Wear protective gloves / eye protection / face protection.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Take off contaminated clothing and wash it before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
Specific treatment (see on this label).
If eye irritation persists: Get medical advice/attention.
Wash contaminated clothing before reuse.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
2
1
0
Health = 2
Fire = 1
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
2
1
0
Health = 2
Fire = 1
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
US
(Contd. on page 3)
Page 3/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 2)
47.0.18
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
CAS: 25068-38-6
NLP: 500-033-5
Reaction Product of Bisphenol A and Epichlorohydrin 50-100%
4 First-aid measures
Description of first aid measures
General information:Immediately remove any clothing soiled by the product.
After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixtureNo further relevant information available.
Advice for firefighters
Protective equipment:Wear self-contained respiratory protective device.
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
6 Accidental release measures
Personal precautions, protective equipment and emergency proceduresNot required.
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
(Contd. on page 4)
US
Page 4/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 3)
47.0.18
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
25068-38-6Reaction Product of Bisphenol A and Epichlorohydrin 90 mg/m
25068-38-6reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average
molecular weight 700)
90 mg/m
PAC-2:
25068-38-6Reaction Product of Bisphenol A and Epichlorohydrin 990 mg/m
25068-38-6reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average
molecular weight 700)
990 mg/m
PAC-3:
25068-38-6Reaction Product of Bisphenol A and Epichlorohydrin 5,900 mg/m
25068-38-6reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average
molecular weight 700)
5,900 mg/m
7 Handling and storage
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Information about protection against explosions and fires:No special measures required.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
Further information about storage conditions:Keep receptacle tightly sealed.
Specific end use(s)No further relevant information available.
8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be
monitored at the workplace.
Additional information:The lists that were valid during the creation were used as basis.
(Contd. on page 5)
US
Page 5/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 4)
47.0.18
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer
exposure use respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:
Tightly sealed goggles
9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Viscous
Color: Light blue
Odor: Characteristic
Odor threshold: Not determined.
pH-value: Not determined.
(Contd. on page 6)
US
Page 6/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 5)
47.0.18
Change in condition
Melting point/Melting range: Undetermined.
Boiling point/Boiling range: Undetermined.
Flash point: 251 C (483.8 F)
Flammability (solid, gaseous): Not applicable.
Decomposition temperature: Not determined.
Auto igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: Not determined.
Density at 20 C (68 F): 1.17 g/cm (9.76 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
VOC content: 0.00 %
0.0 g/l / 0.00 lb/gal
Solids content: 0.0 %
Other information No further relevant information available.
10Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
US
(Contd. on page 7)
Page 7/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 6)
47.0.18
11Toxicological information
Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin:Irritant to skin and mucous membranes.
on the eye:Irritating effect.
Sensitization:Sensitization possible through skin contact.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for
preparations:
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
NTP (National Toxicology Program)
None of the ingredients is listed.
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Ecotoxical effects:
Remark:Toxic for fish
Additional ecological information:
General notes:
Water hazard class 2 (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
US
(Contd. on page 8)
Page 8/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 7)
47.0.18
13Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
14Transport information
UN-Number
DOT not regulated
IMDG, IATA UN3082
UN proper shipping name
DOT not regulated
IMDG ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Epoxy Resin), MARINE POLLUTANT
IATA ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Epoxy Resin)
Transport hazard class(es)
DOT
Class not regulated
IMDG, IATA
Class 9 Miscellaneous dangerous substances and articles
Label 9
Packing group
DOT not regulated
IMDG, IATA III
Environmental hazards: Product contains environmentally hazardous substances:
Epoxy Resin
Marine pollutant: Yes
Symbol (fish and tree)
Special marking (IATA): Symbol (fish and tree)
Special precautions for user Warning: Miscellaneous dangerous substances and articles
Danger code (Kemler): 90
EMS Number: F-A,S-F
Stowage Category A
(Contd. on page 9)
US
Page 9/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 8)
47.0.18
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
Transport/Additional information:
IMDG
Limited quantities (LQ) 5L
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 1000 ml
UN “Model Regulation”: UN 3082 ENVIRONMENTALLY HAZARDOUS
SUBSTANCES, LIQUID, N.O.S. (EPOXY RESIN), 9, III
15Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
TSCA (Toxic Substances Control Act) (Substances not listed):
All ingredients are listed.
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
Proposition 65
Chemicals known to cause cancer:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
None of the ingredients is listed.
(Contd. on page 10)
US
Page 10/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 9)
47.0.18
TLV (Threshold Limit Value established by ACGIH)
None of the ingredients is listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS07
GHS09
Signal wordWarning
Hazard-determining components of labeling:
Reaction Product of Bisphenol A and Epichlorohydrin
Hazard statements
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
Toxic to aquatic life with long lasting effects.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid release to the environment.
Wear protective gloves / eye protection / face protection.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Take off contaminated clothing and wash it before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
Specific treatment (see on this label).
If eye irritation persists: Get medical advice/attention.
Wash contaminated clothing before reuse.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision07/23/2015 / 3
Abbreviations and acronyms:
ADR: Accord europ en sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
(Contd. on page 11)
US
Page 11/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 10)
47.0.18
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Skin Irrit. 2: Skin corrosion/irritation Category 2
Eye Irrit. 2A: Serious eye damage/eye irritation Category 2A
Skin Sens. 1: Skin sensitisation Category 1
Aquatic Chronic 2: Hazardous to the aquatic environment – long-term aquatic hazard Category 2
US
Page 1/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
46. 0
1 Identification
Product identifier
Trade name: EA604 Hardener
Article number:I604089
Application of the substance / the mixtureEpoxy curing agent
Details of the supplier of the safety data sheetSikaAxson US – EHS Department
Manufacturer/Supplier:
Company Name: Axson Technologies US, Inc.-SikaAxson
Headquarters:
31200 Stephenson Hwy
Madison Heights, MI 48071
USA
Manufacturing Site:
1611 Hults Drive
Eaton Rapids, MI 48827
USA
ehs-us@axson.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
2 Hazard(s) identification
Classification of the substance or mixture
d~
GHS07
Skin Sens. 1 H317 May cause an allergic skin reaction.
Aquatic Chronic 3 H412 Harmful to aquatic life with long lasting effects.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
d~
GHS07
Signal wordWarning
Hazard-determining components of labeling:
Polymercaptan
Hazard statements
May cause an allergic skin reaction.
Harmful to aquatic life with long lasting effects.
(Contd. on page 2)
US
Page 2/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 1)
46. 0
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid breathing dust/fume/gas/mist/vapors/spray
Contaminated work clothing must not be allowed out of the workplace.
Avoid release to the environment.
Wear protective gloves.
If on skin: Wash with plenty of water.
Specific treatment (see on this label).
If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
0
1
0
Health = 0
Fire = 1
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
0
1
0
Health = 0
Fire = 1
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
Polymercaptan 50-100%
CAS: 90-72-2
EINECS: 202-013-9
2,4,6-tris(dimethylaminomethyl)phenol 5-10%
4 First-aid measures
Description of first aid measures
After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:Rinse opened eye for several minutes under running water.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
(Contd. on page 3)
US
Page 3/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 2)
46. 0
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixtureNo further relevant information available.
Advice for firefighters
Protective equipment:Wear self-contained respiratory protective device.
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
6 Accidental release measures
Personal precautions, protective equipment and emergency proceduresNot required.
Environmental precautions:
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
90-72-2 2,4,6-tris(dimethylaminomethyl)phenol 6.5 mg/m
63148-62-9 Polymethylsiloxane 65 mg/m
PAC-2:
90-72-2 2,4,6-tris(dimethylaminomethyl)phenol 72 mg/m
63148-62-9 Polymethylsiloxane 720 mg/m
PAC-3:
90-72-2 2,4,6-tris(dimethylaminomethyl)phenol 430 mg/m
63148-62-9 Polymethylsiloxane 4,300 mg/m
7 Handling and storage
Handling:
Precautions for safe handlingNo special precautions are necessary if used correctly.
Information about protection against explosions and fires:No special measures required.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
(Contd. on page 4)
US
Page 4/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 3)
46. 0
Further information about storage conditions:None.
Specific end use(s)No further relevant information available.
8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Breathing equipment:Not required.
Protection of hands:
_S
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:Goggles recommended during refilling.
9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Liquid
Color: Amber colored
Odor: Sulphurous
Odor threshold: Not determined.
pH-value: Not determined.
(Contd. on page 5)
US
Page 5/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 4)
46. 0
Change in condition
Melting point/Melting range:Undetermined.
Boiling point/Boiling range:Undetermined.
Flash point: 149 C (300.2 F)
Flammability (solid, gaseous):Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Auto igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: Not determined.
Density at 20 C (68 F): 1.14 g/cm (9.51 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Water: 0.1 %
VOC content: 0.00 %
0.0 g/l / 0.00 lb/gl
Solids content: 0.1 %
Other information No further relevant information available.
10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
US
(Contd. on page 6)
Page 6/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 5)
46. 0
11 Toxicological information
Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin:No irritant effect.
on the eye:No irritating effect.
Sensitization:Sensitization possible through skin contact.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
NTP (National Toxicology Program)
None of the ingredients is listed.
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Ecotoxical effects:
Remark:Harmful to fish
Additional ecological information:
General notes:
Water hazard class 1 (Self-assessment): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Harmful to aquatic organisms
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
(Contd. on page 7)
US
Page 7/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 6)
46. 0
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
14 Transport information
UN-Number
DOT, IMDG, IATA UN3334
UN proper shipping name
DOT, IMDG Aviation regulated liquid, n.o.s.
IATA Aviation regulated liquid, n.o.s. (Mercaptan-Terminated polymer)
Transport hazard class(es)
DOT, IMDG, IATA
dc p `
Class 9 Miscellaneous dangerous substances and articles
Label 9 Packing group
DOT, IMDG, IATA III
Environmental hazards:
Marine pollutant: No
Special precautions for user Warning: Miscellaneous dangerous substances and articles
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN “Model Regulation”: UN 3334 AVIATION REGULATED LIQUID, N.O.S., 9, III
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
TSCA (Toxic Substances Control Act) (Substances not listed):
71074-89-0 Bis(dimethylaminomethyl)phenol
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
(Contd. on page 8)
US
Page 8/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 7)
46. 0
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
TSCA new (21st Century Act) (Substances not listed)
Polymercaptan
Proposition 65
Chemicals known to cause cancer:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
None of the ingredients is listed.
TLV (Threshold Limit Value established by ACGIH)
None of the ingredients is listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
d~
GHS07
Signal wordWarning
Hazard-determining components of labeling:
Polymercaptan
Hazard statements
May cause an allergic skin reaction.
Harmful to aquatic life with long lasting effects.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Contaminated work clothing must not be allowed out of the workplace.
Avoid release to the environment.
Wear protective gloves.
If on skin: Wash with plenty of water.
Specific treatment (see on this label).
If skin irritation or rash occurs: Get medical advice/attention.
(Contd. on page 9)
US
Page 9/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 8)
46. 0
Wash contaminated clothing before reuse.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision01/26/2018 / 4
Abbreviations and acronyms:
ADR: Accord europ en sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Skin Sens. 1: Skin sensitisation Category 1
Aquatic Chronic 3: Hazardous to the aquatic environment – long-term aquatic hazard Category 3
US