SDS: 0059127
Date Prepared: 02/05/2017
SAFETY DATA SHEET
1. IDENTIFICATION
Product Name: ETFE Film/Fabric/Felt
Product Description: Ethylene/Tetrafluoroethylene Copolymer
Synonyms: Make sure OPN names are listed in section 1 of the MSDS
Chemical Family: Ethylene/Tetrafluoroethylene Copolymer
Molecular Weight: Not available
Intended/Recommended Use: Film
Other Product Names: A6000, A6200, A6200 BLUE, A6200 CLEAR, A6200 RED, A6200M.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.
CYTEC INDUSTRIES INC., 504 CARNEGIE CENTER, PRINCETO N, NEW JERSEY 08540, USA
For Product and all Non-Emergency Information call 1-800/652-6013. Outside the USA and Canada call 1-973/357-
3193.
EMERGENCY PHONE (24 hours/day) – For emergency only involving spill, leak, fire, exposure or accident call:
Asia Pacific:
Australia – +61 2 8014 4558 (Carechem24)
China (PRC) – +86 0532 83889090 (NRCC) +86 512 8090 3042 (Carechem24)
New Guinea – +61 2 8014 4558 (Carechem24)
New Zealand – +64 9 929 1483 (Carechem24)
India, Japan, Korea, Malaysia, Thailand – +65 3158 1074 (Carechem24 Singapore)
India (Hindi Speaking Only) – +65 3158 1198 or 000800 100 7479 (Carechem24 Singapore)
Canada: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)
Europe/Africa/Middle East (Carechem24 UK):
Europe, Middle East, Africa, Israel – +44 1235 239 670
(Arabic speaking countries) – +44 1235 239 671
Latin America:
Brazil – +55 11 3197 5891 (Carechem24)
Chile – +56 2 2582 9336 (Carechem24)
All Others – +44 1235 239 670 (Carechem24 UK)
USA: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)
2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable
Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
Not applicable
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article?Article
HAZARDOUS INGREDIENTS
No Hazardous Ingredients
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.
4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Material is not expected to be harmful if inhaled. Remove to fresh air.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet.
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus.
Special Hazards:
None known
Page 2 of 7ETFE Film/Fabric/Felt SDS: 0059127 Date Prepared: 02/05/2017
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.
7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: None
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Room temperature
Reason: Quality.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
None recommended
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed.
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.
No values have been established.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: various
Appearance: film
ETFE Film/Fabric/Felt SDS: 0059127 Date Prepared: 02/05/2017 Page 3 of 7
9. PHYSICAL AND CHEMICAL PROPERTIES
Odor: odorless
Boiling Point: Not available
Melting Point: 230 – 280 C 446 – 536 F
Vapor Pressure: Not available
Specific Gravity/Density: Not available
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not available
Saturation In Air (% By Vol.):Not available
Evaporation Rate: Not available
Solubility In Water: Insoluble
Volatile Organic Content: Not available
Flash Point: ~470 C 878 F
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:Not available
Decomposition Temperature: >270 C 518 F
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not applicable
Kst (bar-m/sec): Not applicable
Maximum Explosion Pressure (Pmax): Not applicable
Dust Class: Not applicable
Minimum Ignition Energy (MIE) (mJ): Not applicable
Minimum Ignition Temperature (MIT) ( C): Not applicable
Minimum Explosive Concentration (MEC) (g/m
3
): Not applicable
Limiting Oxygen Concentration (LOC) (%): Not applicable
10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Conditions To Avoid: Avoid exposure to heat.
Polymerization: Will not occur
Materials To Avoid: fluorine
oxidizers
Alkali metals
Hazardous Decomposition
Products:
carbonyl fluoride
perfluorolefins
Hydrogen fluoride
Carbon monoxide and carbon dioxide
11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
Page 4 of 7ETFE Film/Fabric/Felt SDS: 0059127 Date Prepared: 02/05/2017
ACUTE TOXICITY DATA
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
This product contains no OSHA regulated (hazardous) components.
California Proposition 65 Warning (applicable in California only) – This product contains (a) chemical(s) known to the State
of California to cause cancer.
12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
This material is not classified as dangerous for the environment.
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
rat
No data
Acute LC50
4 hr .Not an expected route of
exposure
ETFE Film/Fabric/Felt
rat
Acute Irritation
Acute LD50
skin Not irritating
SDS: 0059127
.Not an expected route of
exposure
Acute Irritation eye Not irritating
dermal
Date Prepared: 02/05/2017
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization respiratory
.>2000 mg/kg
No data
Page 5 of 7
inhalation
oral
Ames Salmonella Assay
No Hazardous Ingredients
13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.
14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods? Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods? Not applicable/Not regulated
ICAO / IATA
Dangerous Goods? Not applicable/Not regulated
IMO
Dangerous Goods? Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
Date Prepared: 02/05/2017 Page 6 of 7ETFE Film/Fabric/Felt SDS: 0059127
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Philippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 02/05/2017
Date of last significant revision:02/01/2017
Prepared By: Legal & Compliance Services; E-mail: custinfo@solvay.com
This information is given without any warranty or representation. We do not assume any legal responsibility for same, nor do we give permission,
inducement, or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation, and
verification. Before using any product, read its label.
Date Prepared: 02/05/2017 Page 7 of 7ETFE Film/Fabric/Felt SDS: 0059127