SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 09/29/2015 Revision date: 07/19/2017 Supersedes: 11/23/2016 Version: 2.0
07/19/2017 USA ()Page 1
SECTION 1: Identification
1.1. Identification
Product form :ArticleName :SMARTCURE Carbon 30-50% Resin Content
1.2. Recommended use and restrictions on use
No additional information available
1.3. Supplier
Gurit (USA) Inc
Rhode Island, 2809 – USA
T 18198689182 – F 001 819 847 2572
marine-na@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number :+44 (0) 2392 242148
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Skin corrosion/irritation,
Category 2
H315 Causes skin irritationSkin sensitisation, Category
1
H317 May cause an allergic skin reactionHazardous to the aquatic
environment Chronic
Hazard, Category 3
H412 Harmful to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS-US labelling
Hazard pictograms (GHS-US) :
GHS07
Signal word (GHS-US) :WarningHazard statements (GHS-US) :H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (GHS-US) :P261 – Avoid breathing vapours, fume
P264 – Wash hands, forearms and face thoroughly after handling
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – If on skin: Wash with plenty of water
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()2/7NameProduct identifier%GHS-US classificationPhenol, polymer with formaldehyde, glycidyl ether(CAS-No.) 28064-14-425 – 50Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin
(number average molecular weight 700)
(CAS-No.) 25068-38-63 – 5Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Oxiranemethanamine, N,N’-(methylenedi-4,1-
phenylene)bis[N-(oxiranylmethyl)-
(CAS-No.) 28768-32-33 – 5Skin Sens. 1, H317
Aquatic Chronic 2, H411
Formaldehyde, polymer with (chloromethyl)oxirane and 4,4′-
(1-methylethylidene)bis[phenol]
(CAS-No.) 28906-96-93 – 5Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing.First-aid measures after skin contact :Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion :Call a poison center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact :Irritation. May cause an allergic skin reaction.Symptoms/effects after eye contact :Eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Reactivity :The product is non-reactive under normal conditions of use, storage and transport. Product is
not explosive.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting :Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information :Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1.For non-emergency personnel
Protective equipment :Protective clothing.Emergency procedures :Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapours.
6.1.2.For emergency responders
Protective equipment :Do not attempt to take action without suitable protective equipment. For further information
refer to section 8: “Exposure controls/personal protection”.
Emergency procedures :Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Collect spillage.Other information :Dispose of materials or solid residues at an authorized site.
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()3/7
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling :Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapours. Handle in accordance with good industrial
hygiene and safety practice.
Handling temperature :<= 35 CHygiene measures :Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions :Store in a well-ventilated place. Keep cool.Maximum storage period :2 yearStorage temperature :-23 - 13 CStorage area :Store away from heat. Store in a well-ventilated place.Special rules on packaging :Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Not applicableOxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Not applicableFormaldehyde, polymer with (chloromethyl)oxirane and 4,4'-(1-methylethylidene)bis[phenol] (28906-96-9)Not applicablereaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure good ventilation of the work station.Environmental exposure controls :Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Gloves. Protective clothing. Safety glasses.
Hand protection:Protective glovesTypeMaterialPermeationThickness (mm)PenetrationDisposable glovesNitrile rubber (NBR)Eye protection:Safety glassesSkin and body protection:Wear suitable protective clothing. Long sleeved protective clothingTypeTyvek Gown/Coveralls
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()4/7
Respiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection
equipment is recommended
Device Filter typeConditionDisposable half maskGas/vapour filterVapour protection
Other information:Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Solid
Appearance :Flexible Sheet.Colour :Black
Odour :odourless
Odour threshold :No data available
pH :No data available
Melting point :Not applicable.
Freezing point :Not applicable.
Boiling point :Not applicable.
Flash point :Not applicable.
Relative evaporation rate (butylacetate=1) :No data available
Flammability (solid, gas) :Not Applicable
Not flammable.
Vapour pressure :No data available
Relative vapour density at 20 C :No data available
Relative density :No data available
Density :1.54 g/cm Cured ply denistySolubility :insoluble in water.
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :Not applicable.
Viscosity, dynamic :Not applicable.
Explosive limits :No data available
Explosive properties :Product is not explosive.
Oxidising properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2.Chemical stability
Stable under normal conditions.
10.3.Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()5/7
10.4.Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5.Incompatible materials
No additional information available
10.6.Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity :Not classifiedreaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)LD50 oral rat11400 mg/kgATE US (oral)11400.000 mg/kg bodyweightSkin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Not classifiedRespiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Not classifiedReproductive toxicity :Not classifiedSpecific target organ toxicity (single exposure):Not classifiedSpecific target organ toxicity (repeated
exposure)
:Not classifiedAspiration hazard :Not classifiedSymptoms/effects after skin contact :Irritation. May cause an allergic skin reaction.Symptoms/effects after eye contact :Eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
Ecology - general :Harmful to aquatic life with long lasting effects.reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)LC50 fish 11.5 mg/lLC50 fish 22 mg/l
12.2.Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Persistence and degradabilityMay cause long-term adverse effects in the environment.
12.3.Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Bioaccumulative potentialNot established.
12.4.Mobility in soil
No additional information available
12.5.Other adverse effects
Effect on the global warming :No known effects from this product.GWPmix comment :No known effects from this product.
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()6/7
SECTION 13: Disposal considerations
13.1.Disposal methods
Regional legislation (waste) :Disposal must be done according to official regulations.Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Product/Packaging disposal recommendations :Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Not applicable
Transportation of Dangerous Goods
Not applicable
Transport by sea
Not applicable
Air transport
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Listed on the United States TSCA (Toxic Substances Control Act) inventoryOxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Listed on the United States TSCA (Toxic Substances Control Act) inventoryFormaldehyde, polymer with (chloromethyl)oxirane and 4,4'-(1-methylethylidene)bis[phenol] (28906-96-9)Listed on the United States TSCA (Toxic Substances Control Act) inventoryreaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the United States TSCA (Toxic Substances Control Act) inventory
15.2. International regulations
CANADA
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Listed on the Canadian DSL (Domestic Substances List)Oxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Listed on the Canadian DSL (Domestic Substances List)Formaldehyde, polymer with (chloromethyl)oxirane and 4,4'-(1-methylethylidene)bis[phenol] (28906-96-9)Listed on the Canadian DSL (Domestic Substances List)reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
Oxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Listed on the EEC inventory EINECS (European Inventory of Existing Commercial Chemical Substances)reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the EU NLP (No Longer Polymers) inventory
National regulations
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()7/7Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Oxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Formaldehyde, polymer with (chloromethyl)oxirane and 4,4'-(1-methylethylidene)bis[phenol] (28906-96-9)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on Turkish inventory of chemical
15.3. US State regulations
No additional information available
SECTION 16: Other information
Revision date :07/19/2017Full text of H-statements:---
---
H315Causes skin irritation---
---
H317May cause an allergic skin reaction---
---
H319Causes serious eye irritation---
---
H411Toxic to aquatic life with long lasting effects---
---
H412Harmful to aquatic life with long lasting effects
SDS US (GHS HazCom 2012)
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as
guaranteeing any specific property of the product