SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
Date of issue: 23/06/2015 Revision date: 22/06/2018 Supersedes: 15/05/2018 Version: 2.7
EN (English) 1/6
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form
:Article
Name
:SA 80 Adhesive Film
Type of product
:Substance/preparation on or in a carrier material
1.2. Relevant identified uses of the substance or mixture and uses advised against
1.2.1. Relevant identified uses
Main use category
:Industrial use
Industrial/Professional use spec
:For professional use only
1.2.2. Uses advised against
No additional information available
1.3. Details of the supplier of the safety data sheet
Supplier
Gurit (UK) Ltd
St Cross Business Park
Newport
PO30 5WU Isle of Wight – United Kingdom
T +44 (0) 1983 828 000
regulatory@gurit.com – www.gurit.com
Manufacturer
Gurit (Spain) Ltd
Pol gono Industrial Romica C/K
Parcela 11C, APDO.447
02080 Albacete – Spain
T +34 967 254 507 – F +34 967 254 005
info-es@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number
:Carechem 24: +44 (0) 1273 289451
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Skin corrosion/irritation, Category 2
H315
Skin sensitisation, Category 1
H317
Hazardous to the aquatic environment Chronic Hazard, Category 3
H412
Full text of H statements : see section 16
Adverse physicochemical, human health and environmental effects
Causes skin irritation. May cause an allergic skin reaction. Harmful to aquatic life with long lasting effects.
2.2. Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]Extra labelling to displayExtra classification(s) to display
Hazard pictograms (CLP)
:GHS07
Signal word (CLP)
:Warning
Hazardous ingredients
:Formaldehyde, polymer with (chloromethyl)oxirane and phenol; reaction product:
bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700)
Hazard statements (CLP)
:H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H412 – Harmful to aquatic life with long lasting effects.
Precautionary statements (CLP)
:P261 – Avoid breathing vapours.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing should not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear protective gloves, protective clothing, eye protection.
P302+P352 – IF ON SKIN: Wash with plenty of water.
EUH-statements
:EUH205 – Contains epoxy constituents. May produce an allergic reaction.
2.3. Other hazards
No additional information available
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
23/06/2015 (Version: 1.0)EN (English) 2/6
22/06/2018 (Version: 2.7)
3.2. Mixtures
NameProduct identifier%Classification according to
Regulation (EC) No.
1272/2008 [CLP]
Formaldehyde, polymer with (chloromethyl)oxirane
and phenol
(CAS-No.) 9003-36-5
(EC-No.) 500-006-8
(REACH-no) 01-2119454393-40
25 – 50Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Acute Not classified
Aquatic Chronic 2, H411
Bisphenol A diglycidyl ether – bisphenol A copolymer(CAS-No.) 25036-25-3
(EC-No.) 607-500-3
25 – 50Skin Irrit. 2, H315reaction product: bisphenol-A-(epichlorhydrin); epoxy
resin (number average molecular weight 700)
(CAS-No.) 25068-38-6
(EC-No.) 500-033-5
(EC Index-No.) 603-074-00-8
(REACH-no) 01-2119456619-26
3 – 5Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Specific concentration limits:NameProduct identifierSpecific concentration limitsreaction product: bisphenol-A-(epichlorhydrin); epoxy
resin (number average molecular weight 700)
(CAS-No.) 25068-38-6
(EC-No.) 500-033-5
(EC Index-No.) 603-074-00-8
(REACH-no) 01-2119456619-26
(C >= 5) Skin Irrit. 2, H315
(C >= 5) Eye Irrit. 2, H319
Full text of H-statements: see section 16
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
:Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
:Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash
occurs: Get medical advice/attention.
First-aid measures after eye contact
:Rinse eyes with water as a precaution.
First-aid measures after ingestion
:Call a poison center or a doctor if you feel unwell.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/effects after skin contact
:Irritation. May cause an allergic skin reaction.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media
:Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media
:Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Hazardous decomposition products in case of fire
:Toxic fumes may be released.
5.3. Advice for firefighters
Precautionary measures fire
:Evacuate area.
Firefighting instructions
:Exercise caution when fighting any chemical fire.
Protection during firefighting
:Do not attempt to take action without suitable protective equipment. Self-contained
breathing apparatus. Complete protective clothing.
Other information
:Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
:Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapours.
6.1.2. For emergency responders
Protective equipment
:Do not attempt to take action without suitable protective equipment. For further information
refer to section 8: “Exposure controls/personal protection”.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
:Collect spillage.
Methods for cleaning up
:Mechanically recover the product.
SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
23/06/2015 (Version: 1.0)EN (English) 3/6
22/06/2018 (Version: 2.7)
Other information
:Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear
personal protective equipment. Avoid breathing vapours. Handle in accordance with good
industrial hygiene and safety practice.
Handling temperature
:<= 35 ( 0) C
Hygiene measures
:Wash contaminated clothing before reuse. Contaminated work clothing should not be
allowed out of the workplace. Do not eat, drink or smoke when using this product. Always
wash hands after handling the product. Separate working clothes from town clothes.
Launder separately. Wash hands and other exposed areas with mild soap and water
before eating, drinking or smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:Store in a well-ventilated place. Keep cool.
Maximum storage period
:2 year
Storage temperature
:-23 - 13 C
Storage area
:Store away from heat. Store in a well-ventilated place.
Special rules on packaging
:Keep only in original container.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No additional information available
8.2. Exposure controls
Appropriate engineering controls:
Ensure good ventilation of the work station.
Personal protective equipment:
Safety glasses.
Hand protection:Protective glovesTypeMaterialPermeationThickness (mm)PenetrationStandardDisposable glovesNitrile rubber (NBR)EN 374Eye protection:Safety glassesSkin and body protection:Wear suitable protective clothing. Long sleeved protective clothingTypeStandardTyvek Gown/CoverallsEN 13034
Respiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory
protection equipment is recommended
Device Filter typeConditionStandardDisposable half maskGas/vapour filterVapour protectionEN 405
Personal protective equipment symbol(s):
Environmental exposure controls:
Avoid release to the environment.
SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
23/06/2015 (Version: 1.0)EN (English) 4/6
22/06/2018 (Version: 2.7)
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:Solid
Appearance
:Flexible Sheet.
Colour
:Green.
Odour
:odourless.
Odour threshold
:No data available
pH
:Not applicable
Relative evaporation rate (butylacetate=1)
:No data available
Melting point
:No data available
Freezing point
:Not applicable
Boiling point
:No data available
Flash point
:Not applicable
Auto-ignition temperature
:Not applicable
Decomposition temperature
:No data available
Flammability (solid, gas)
:> 100 C estimated
Non flammable.
Vapour pressure
:No data available
Relative vapour density at 20 C
:No data available
Relative density
:Not applicable
Solubility
:No data available
Log Pow
:No data available
Viscosity, kinematic
:No data available
Viscosity, dynamic
:No data available
Explosive properties
:No data available
Oxidising properties
:No data available
Explosive limits
:Not applicable
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2. Chemical stability
Stable under normal conditions. Stable at ambient temperature and under normal conditions of use.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
:Not classified
Acute toxicity (dermal)
:Not classified
Acute toxicity (inhalation)
:Not classified
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LD50 oral rat> 2 g/kgreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)LD50 oral rat11400 mg/kg
SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
23/06/2015 (Version: 1.0)EN (English) 5/6
22/06/2018 (Version: 2.7)
Skin corrosion/irritation :Causes skin irritation.
pH: Not applicable
Serious eye damage/irritation
:Not classified
pH: Not applicable
Respiratory or skin sensitisation
:May cause an allergic skin reaction.
Germ cell mutagenicity
:Not classified
Carcinogenicity
:Not classified
Reproductive toxicity
:Not classified
STOT-single exposure
:Not classified
STOT-repeated exposure
:Not classified
Aspiration hazard
:Not classified
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
:Harmful to aquatic life with long lasting effects.
Acute aquatic toxicity
:Not classified
Chronic aquatic toxicity
:Harmful to aquatic life with long lasting effects.
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LC50 fish 1< 1 mg/lreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)LC50 fish 11.5 mg/lLC50 fish 22 mg/l
12.2. Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Persistence and degradabilityMay cause long-term adverse effects in the environment.
12.3. Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Bioaccumulative potentialNot established.
12.4. Mobility in soil
No additional information available
12.5. Results of PBT and vPvB assessment
No additional information available
12.6. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Regional legislation (waste)
:Disposal must be done according to official regulations.
Waste treatment methods
:Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
:Avoid release to the environment. Dispose in a safe manner in accordance with
local/national regulations.
Ecology - waste materials
:Avoid release to the environment.
European List of Waste (LoW) code
:08 04 09* - waste adhesives and sealants containing organic solvents or other dangerous
substances
SECTION 14: Transport information
In accordance with ADR / IATA / IMDG
ADRIMDG IATA14.1. UN numberNot regulatedNot regulated Not regulated14.2. UN proper shipping nameNot regulatedNot regulated Not regulated
SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
23/06/2015 (Version: 1.0)EN (English) 6/6
22/06/2018 (Version: 2.7)
14.3. Transport hazard class(es)Not regulatedNot regulated Not regulated14.4. Packing groupNot regulatedNot regulated Not regulated14.5. Environmental hazardsNot regulatedNot regulated Not regulatedNo supplementary information available
14.6. Special precautions for user
Overland transport
Not regulated
Transport by sea
Not regulated
Air transport
Not regulated
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1. EU-Regulations
Contains no substance on the REACH candidate list
Directive 2012/18/EU (SEVESO III)
15.1.2. National regulations
No additional information available
15.2. Chemical safety assessment
No chemical safety assessment has been carried out
SECTION 16: Other information
Full text of H- and EUH-statements:Aquatic Acute Not classifiedHazardous to the aquatic environment - Acute Hazard Not classifiedAquatic Chronic 2Hazardous to the aquatic environment Chronic Hazard, Category 2Eye Irrit. 2Serious eye damage/eye irritation, Category 2Skin Irrit. 2Skin corrosion/irritation, Category 2Skin Sens. 1Skin sensitisation, Category 1H315Causes skin irritation.H317May cause an allergic skin reaction.H319Causes serious eye irritation.H411Toxic to aquatic life with long lasting effects.H412Harmful to aquatic life with long lasting effects.EUH205Contains epoxy constituents. May produce an allergic reaction.Classification and procedure used to derive the classification for mixtures according to Regulation (EC) 1272/2008 [CLP]:Skin Irrit. 2H315Calculation methodSkin Sens. 1H317Calculation methodAquatic Chronic 3H412Expert judgment
SDS EU (REACH Annex II)
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient's organisation is prohibited without Gurit's prior written consent.