Safety Data Sheet
HSF 118-N-2-30S-NAT RESIN
Revision date : 2014/07/25 Page: 1/9
Version: 3.0 (30576836/SDS_GEN_US/EN)
1. Identification
Product identifier used on the label
HSF 118-N-2-30S-NAT RESIN
Recommended use of the chemical and restriction on use
Recommended use*: polyurethane component; industrial chemicals
Suitable for use in industrial sector: Polymers industry; chemical industry
* The Recommended use identified for this product is provided solely to comply with a US Federal requirement and is not
part of the seller’s published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty,
express or implied, including by incorporation into or reference in the seller’s sales agreement.
Details of the supplier of the safety data sheet
Company:
BASF CORPORATION
100 Park Avenue
Florham Park, NJ 07932, USA
Telephone: +1 973 245-6000
Emergency telephone number
CHEMTREC: 1-800-424-9300
BASF HOTLINE: 1-800-832-HELP (4357)
Other means of identification
Chemical family: resin
Synonyms: Urethane System Resin Component
2. Hazards Identification
According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200
Classification of the product
STOT RE 2 Specific target organ toxicity repeated
exposure
Label elements
Pictogram:
Safety Data Sheet
HSF 118-N-2-30S-NAT RESIN
Revision date : 2014/07/25 Page: 2/9
Version: 3.0 (30576836/SDS_GEN_US/EN)
Signal Word:
Warning
Hazard Statement:
H373 May cause damage to organs (Kidney) through prolonged or repeated
exposure.
Precautionary Statements (Prevention):
P260 Do not breathe dust/gas/mist/vapours.
Precautionary Statements (Response):
P311 Call a POISON CENTER or doctor/physician.
Precautionary Statements (Disposal):
P501 Dispose of contents/container to hazardous or special waste collection
point.
Hazards not otherwise classified
No specific dangers known, if the regulations/notes for storage and handling are considered.
According to Regulation 1994 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200
Emergency overview
CAUTION:
CAN CAUSE KIDNEY DAMAGE.
3. Composition / Information on Ingredients
According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200
CAS Number Content (W/W) Chemical name
111-46-6 >= 1.0 – < 5.0 % diethylene glycol
According to Regulation 1994 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200
CAS Number Content (W/W) Chemical name
< 85.0 % Polyol
460-73-1 < 15.0 % Propane, 1,1,1,3,3-pentafluoro-
13674-84-5 < 10.0 % tris(2-chloro-1-methylethyl)phosphate
The product contains:
CAS Number
Content (W/W) Chemical name
460-73-1 < 15.0 % Propane, 1,1,1,3,3-pentafluoro-
13674-84-5 < 10.0 % tris(2-chloro-1-methylethyl)phosphate
Safety Data Sheet
HSF 118-N-2-30S-NAT RESIN
Revision date : 2014/07/25 Page: 3/9
Version: 3.0 (30576836/SDS_GEN_US/EN)
4. First-Aid Measures
Description of first aid measures
General advice:
Remove contaminated clothing.
If inhaled:
Remove the affected individual into fresh air and keep the person calm. Assist in breathing if
necessary. Immediate medical attention required.
If on skin:
Wash affected areas thoroughly with soap and water. If irritation develops, seek medical attention.
If in eyes:
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water.
Immediate medical attention required.
If swallowed:
Rinse mouth and then drink plenty of water. Do not induce vomiting. Never induce vomiting or give
anything by mouth if the victim is unconscious or having convulsions. Immediate medical attention
required.
Most important symptoms and effects, both acute and delayed
Information on: diethylene glycol
Symptoms: Overexposure may cause:, vomiting, coma, abdominal cramps, lethargy, nausea,
diarrhea, headache
----------------------------------
Indication of any immediate medical attention and special treatment needed
Note to physician
Treatment: Treat according to symptoms (decontamination, vital functions), no
known specific antidote.
5. Fire-Fighting Measures
Extinguishing media
Suitable extinguishing media:
water spray, dry powder, carbon dioxide, foam
Special hazards arising from the substance or mixture
Hazards during fire-fighting:
No particular hazards known.
Advice for fire-fighters
Protective equipment for fire-fighting:
Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Safety Data Sheet
HSF 118-N-2-30S-NAT RESIN
Revision date : 2014/07/25 Page: 4/9
Version: 3.0 (30576836/SDS_GEN_US/EN)
6. Accidental release measures
Further accidental release measures:
High risk of slipping due to leakage/spillage of product.
Personal precautions, protective equipment and emergency procedures
Use personal protective clothing.
Environmental precautions
Do not empty into drains. Do not discharge into the subsoil/soil.
Methods and material for containment and cleaning up
Spills should be contained, solidified, and placed in suitable containers for disposal.
7. Handling and Storage
Precautions for safe handling
Ensure thorough ventilation of stores and work areas. Protect against moisture. Product should not
be mixed with air above atmospheric pressure for leak testing or any other purpose. Use dry nitrogen
to transfer or leak test equipment pressurized with product.
Protection against fire and explosion:
No explosion proofing necessary.
Conditions for safe storage, including any incompatibilities
Segregate from foods and animal feeds. Segregate from acids. Segregate from oxidants.
Suitable materials for containers: carbon steel (iron), High density polyethylene (HDPE), Low density
polyethylene (LDPE), Stainless steel 1.4301 (V2)
Further information on storage conditions: No special precautions necessary. Avoid extreme heat.
Store protected against freezing.
Storage stability:
Storage temperature: 16 - 27 C
8. Exposure Controls/Personal Protection
Advice on system design:
Provide local exhaust ventilation to control vapours/mists.
Personal protective equipment
Respiratory protection:
Wear a NIOSH-certified (or equivalent) organic vapour/particulate respirator as needed.
Hand protection:
Chemical resistant protective gloves
Eye protection:
Wear face shield or tightly fitting safety goggles (chemical goggles) if splashing hazard exists.
Safety Data Sheet
HSF 118-N-2-30S-NAT RESIN
Revision date : 2014/07/25 Page: 5/9
Version: 3.0 (30576836/SDS_GEN_US/EN)
Body protection:
Standard work clothes and shoes.
General safety and hygiene measures:
Avoid contact with skin. Handle in accordance with good industrial hygiene and safety practice. Wear
protective clothing as necessary to prevent contact. Avoid inhalation of vapours/mists. Wash soiled
clothing immediately.
9. Physical and Chemical Properties
Form: liquid
Odour: amine-like, mild
Odour threshold: not applicable
Colour: amber
pH value: > 7.0
melting range: < -5.00 C
Boiling point: 100.00 C ( 760.000000 mmHg)
Sublimation point: No applicable information available.
Flash point: > 94.00 C (open cup)
Flammability: not flammable
Lower explosion limit: For liquids not relevant for classification
and labelling. The lower explosion point
may be 5 – 15 C below the flash point.
Upper explosion limit: For liquids not relevant for classification
and labelling.
Autoignition: > 200.00 C
Vapour pressure: 0.10 mmHg ( 20.00 C)
Density: 8.8000 lb/USg ( 25.00 C)
Relative density: No applicable information available.
Vapour density: not applicable
Partitioning coefficient n-
octanol/water (log Pow):
Unspecified
Self-ignition
temperature:
No self ignition was observed up to the
specified temperature.
Thermal decomposition: No decomposition if stored and handled as
prescribed/indicated.
Viscosity, dynamic: 560.000 mPa.s ( 23.00 C)
Viscosity, kinematic: No applicable information available.
Solubility in water: soluble
Miscibility with water: slightly soluble
Solubility (quantitative): No applicable information available.
Solubility (qualitative): No applicable information available.
Evaporation rate: Value can be approximated from Henry’s
Law Constant or vapor pressure.
Other Information: If necessary, information on other physical and chemical
parameters is indicated in this section.
10. Stability and Reactivity
Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
Corrosion to metals:
No corrosive effect on metal.
Safety Data Sheet
HSF 118-N-2-30S-NAT RESIN
Revision date : 2014/07/25 Page: 6/9
Version: 3.0 (30576836/SDS_GEN_US/EN)
Oxidizing properties:
Not an oxidizer.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
No hazardous reactions if stored and handled as prescribed/indicated.
Conditions to avoid
Temperature: < 0 degrees Celsius
Incompatible materials
acids, oxidizing agents, isocyanates
Hazardous decomposition products
Decomposition products:
Hazardous decomposition products: carbon monoxide, carbon dioxide
Thermal decomposition:
No decomposition if stored and handled as prescribed/indicated.
11. Toxicological information
Primary routes of exposure
Routes of entry for solids and liquids are ingestion and inhalation, but may include eye or skin
contact. Routes of entry for gases include inhalation and eye contact. Skin contact may be a route
of entry for liquefied gases.
Acute Toxicity/Effects
Acute toxicity
Assessment of acute toxicity: No known acute effects.
Assessment other acute effects
Assessment of STOT single:
Based on the available information there is no specific target organ toxicity to be expected after a
single exposure.
Origin of data: expert judgement
Irritation / corrosion
Assessment of irritating effects: No irritation is expected under intended use and appropriate
handling.
Sensitization
Assessment of sensitization: The chemical structure does not suggest a sensitizing effect.
Aspiration Hazard
No aspiration hazard expected.
Chronic Toxicity/Effects
Repeated dose toxicity
Safety Data Sheet
HSF 118-N-2-30S-NAT RESIN
Revision date : 2014/07/25 Page: 7/9
Version: 3.0 (30576836/SDS_GEN_US/EN)
Assessment of repeated dose toxicity: Repeated oral uptake of the substance did not cause
substance-related effects. Repeated inhalative uptake of the substance did not cause substance-
related effects. Repeated dermal uptake of the substance did not cause substance-related effects.
Genetic toxicity
Assessment of mutagenicity: The chemical structure does not suggest a specific alert for such an
effect.
Carcinogenicity
Assessment of carcinogenicity: The chemical structure does not suggest a specific alert for such an
effect.
Reproductive toxicity
Assessment of reproduction toxicity: The chemical structure does not suggest a specific alert for
such an effect.
Teratogenicity
Assessment of teratogenicity: The chemical structure does not suggest a specific alert for such an
effect.
Other Information
The product has not been tested. The statement has been derived from substances/products of a
similar structure or composition.
Symptoms of Exposure
Medical conditions aggravated by overexposure
Data available do not indicate that there are medical conditions that are generally recognized as
being aggravated by exposure to this substance/product.
12. Ecological Information
Toxicity
Aquatic toxicity
Assessment of aquatic toxicity:
There is a high probability that the product is not acutely harmful to aquatic organisms.
Persistence and degradability
Assessment biodegradation and elimination (H2O)
Poorly biodegradable.
Elimination information
Poorly biodegradable.
Bioaccumulative potential
Assessment bioaccumulation potential
Does not significantly accumulate in organisms.
Mobility in soil
Assessment transport between environmental compartments
Safety Data Sheet
HSF 118-N-2-30S-NAT RESIN
Revision date : 2014/07/25 Page: 8/9
Version: 3.0 (30576836/SDS_GEN_US/EN)
Adsorption to solid soil phase is not expected.
Additional information
Adsorbable organically-bound halogen (AOX):
This product contains no organically-bound halogen.
Other ecotoxicological advice:
The product has not been tested. Do not discharge product into the environment without control.
13. Disposal considerations
Waste disposal of substance:
Incinerate in a licensed facility. Dispose of in a licensed facility. Do not discharge substance/product
into sewer system.
Container disposal:
Steel drums must be emptied and can be sent to a licensed drum reconditioner for reuse, a scrap
metal dealer or an approved landfill. Do not attempt to refill or clean containers since residue is
difficult to remove. Under no circumstances should empty drums be burned or cut open with gas or
electric torch as toxic decomposition products may be liberated. Do not reuse empty containers.
14. Transport Information
Land transport USDOT
Classified as combustible liquid in containers greater than 119
gallons.
Sea transport
IMDG
Not classified as a dangerous good under transport regulations
Air transport
IATA/ICAO
Not classified as a dangerous good under transport regulations
15. Regulatory Information
Federal Regulations
Registration status:
Chemical TSCA, US released / listed
EPCRA 311/312 (Hazard categories): Not hazardous;
CERCLA RQ CAS Number Chemical name
1000 LBS 75-07-0 acetaldehyde
100 LBS 123-91-1 1,4-dioxane
Safety Data Sheet
HSF 118-N-2-30S-NAT RESIN
Revision date : 2014/07/25 Page: 9/9
Version: 3.0 (30576836/SDS_GEN_US/EN)
State regulations
CA Prop. 65:
THIS PRODUCT CONTAINS A CHEMICAL(S) KNOWN TO THE STATE OF CALIFORNIA TO
CAUSE CANCER.
NFPA Hazard codes:
Health : 1 Fire: 1 Reactivity: 1 Special:
HMIS III rating
Health: 1 Flammability: 1 Physical hazard: 1
16. Other Information
SDS Prepared by:
BASF NA Product Regulations
SDS Prepared on: 2014/07/25
We support worldwide Responsible Care initiatives. We value the health and safety of our
employees, customers, suppliers and neighbors, and the protection of the environment. Our
commitment to Responsible Care is integral to conducting our business and operating our facilities in
a safe and environmentally responsible fashion, supporting our customers and suppliers in ensuring
the safe and environmentally sound handling of our products, and minimizing the impact of our
operations on society and the environment during production, storage, transport, use and disposal of
our products.
IMPORTANT: WHILE THE DESCRIPTIONS, DESIGNS, DATA AND INFORMATION CONTAINED
HEREIN ARE PRESENTED IN GOOD FAITH AND BELIEVED TO BE ACCURATE , IT IS
PROVIDED FOR YOUR GUIDANCE ONLY. BECAUSE MANY FACTORS MAY AFFECT
PROCESSING OR APPLICATION/USE, WE RECOMMEND THAT YOU MAKE TESTS TO
DETERMINE THE SUITABILITY OF A PRODUCT FOR YOUR PARTICULAR PURPOSE PRIOR
TO USE. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITN ESS FOR A PARTICULAR PURPOSE, ARE
MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET
FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED
WITHOUT INFRINGING THE INTELLECTUAL PR OPERTY RIGHTS OF OTHERS. IN NO CASE
SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED
A PART OF OUR TERMS AND CONDITIONS OF SALE. FURTHER, YOU EXPRESSLY
UNDERSTAND AND AGREE THAT THE DESCRIPTIO NS, DESIGNS, DATA, AND INFORMATION
FURNISHED BY OUR COMPANY HEREUNDER AR E GIVEN GRATIS AND WE ASSUME NO
OBLIGATION OR LIABILITY FOR THE DESCRIPTION, DESIGNS, DATA AND INFORMATION
GIVEN OR RESULTS OBTAINED, ALL SUCH BEING GIVEN AND ACCEPTED AT YOUR RISK.
BASF CORPORATION WILL NOT MAKE ITS PRODUCTS AVAILABLE TO CUSTOMERS FOR
USE IN THE MANUFACTURE OF MEDICAL DEVICES WHICH ARE INTENDED FOR
PERMANENT IMPLANTATION IN THE HUMAN BODY OR IN PERMANENT CONTACT WITH
INTERNAL BODILY TISSUES OR FLUIDS.
END OF DATA SHEET