Revised Date: February 8, 2011 Page: 1 of 4
AXEL Plastics Research Laboratories, Inc.
P.O. Box 77 0855
58-20 Broadway
Woodside, NY 11377-0855
Phone: 1-718-672-8300
Fax: 1-718-565-7447
E-mail: info@axelplastics.com
CHEMTREC 24-HOUR EMERGENCY PHONE:
1-800-424-9300 (USA & Canada)
001-703-527-3887 (Outside of USA & Canada)
1. PRODUCT IDENTIFICATION
PRODUCT NAME: MOLD WIZ #249-B41
PRODUCT CLASS: Resin Emulsion
PRODUCT FAMILY: Water based Mold Release
PRODUCT DESCRIPTION: Proprietary resin emulsion of polyolefins and organic fatty acids in
combination with wetting agents and surfactant in a water/alcohol
vehicle.
2. COMPOSITION INFORMATION
COMPONENT Amount CAS #
**Isopropyl Alcohol 8 – 10% 67-63-0 TLV: 400 ppm
** SUBJECT TO REPORTING REQUIREMENTS OF SARA 313 TITLE III
3. HAZARD IDENTIFICATION
EMERGENCY OVERVIEW
Description: Material is low viscosity off white to light beige color aqueous emulsion.
It may cause irritation to eyes and skin. Material is a non-flammable/ self-
extinguishing liquid.
HMIS Rating
Health 1
Flammability 1
Reactivity 0
POTENTIAL HEALTH EFFECTS
EFFECTS OF OVER-EXPOSURE:
EYES: May cause temporary irritation.
SKIN: May cause irritation.
INHALATION: May cause headaches and dizziness.
INGESTION: Minimal toxicity.
MOLD RELEASES & PROCESS AID ADDITIVES
Engineering Chemistry Since 1941
ISO 9001-2000 Registered
Revised Date: February 8, 2011 Page: 2 of 4
4. FIRST AID MEASURES
EYES: Immediately flush with liberal amounts of water for at least 15 minutes.
Get prompt medical attention.
SKIN: Wash area with detergent and water.
INHALATION: Remove to fresh air. If not breathing, give mouth-to-mouth resuscitation.
If breathing difficult, give oxygen. Call a physician.
INGESTION: Do not induce vomiting. Get prompt medical attention.
5. FIRE-FIGHTING MEASURES
FLASH POINT: Non Flammable / Self-extinguishing (C.O.C)
EXTINGUISHING MEDIA: Water Fog; Foam; CO2; Dry Chemicals.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None.
FIRE FIGHTING PRECAUTIONS/INSTRU CTIONS: Wear NIOSH approved self-contained breathing
apparatus with full face piece and protective
clothing to prevent contact with skin and eyes.
6. ACCIDENTAL RELEASE MEASURES
Contain spill. If container is damaged, transfer to another closed lined metal or plastic container.
Use absorbent material to collect and contain for salvage or disposal.
7. HANDLING AND STORAGE
Do not consume food, drink or tobacco in areas where they may be contaminated by this material.
Wash hands before eating, drinking or smoking.
Indoor storage recommended. Avoid freezing. Keep container closed when not in use.
Cold temperatures will make material more viscous.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
VENTILATION: USE IN ADEQUATELY VENTILATED AREAS.
LOCAL EXHAUST: PREFERABLE
MECHANICAL: ACCEPTABLE
SPECIAL: NONE KNOWN TO AXEL PLASTICS
SKIN PROTECTION: GENERALLY NOT REQUIRED. DEPENDING UPON CONDITION OF
USE. IMPERVIOUS GLOVES AND APRON RECOMMENDED TO
PREVENT SKIN CONTACT.
EYE PROTECTION: SAFETY GLASSES WITH SIDE SHIELDS OR GOGGLES.
RESPIRATORY PROTECTION: RESPIRATORY MASK IS NOT REQUIRED FOR PROPERLY
VENTILATED AREAS. IF VAPOR OR MIST ACCUMULATES,
USE NIOSH APPROVED RESPIRATOR.
Revised Date: February 8, 2011 Page: 3 of 4
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
COLOR: Off White
ODOR: Odorless
pH VALUE: 9.0 Min: 8.0 Max: 10.0
BOILING POINT: 200 F / 93 C
FLASH POINT: Self-extinguishing (C.O.C)
MELTING POINT: Not applicable
DENSITY @ 25 C: 0.978
VISCOSITY @ 25 C: < 50 cps
SOLUBILITY IN WATER: Soluble
PERCENTAGE VOLATILE: 93%
EVAPORATION RATE: Not applicable
10. STABILITY AND REACTIVITY
STABILITY: Stable.
INCOMPATIBILITIES: Avoid freezing.
HAZARDOUS POLYMERIZATION: Will not occur.
HAZARDOUS DECOMPOSITION: Carbon dioxide and/or Carbon monoxide.
11. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY:
12. ECOLOGICAL INFORMATION
Not expected to be acutely toxic to aquatic organisms.
13. DISPOSAL CONSIDERATION
The transportation, storage, treatment and disposal of this material must be conducted in
compliance with all applicable National and Local regulations.
14. TRANSPORT INFORMATION
PROPER SHIPPING NAME: Resin Emulsion UN No : Unregulated
D.O.T. HAZARD CLASS : Unrestricted ADR/RID (ROAD/RAIL) : Unregulated
D.O.T. ID NUMBER : IMO (OCEAN) : Unregulated
D.O.T. HAZARD NAME : PACKAGING GROUP : Unregulated
IATA (AIR) : Unregulated
Revised Date: February 8, 2011 Page: 4 of 4
15. REGULATORY INFORMATION
All components in this product are on the TSCA (USA), DSL (Canada), EINECS (Europe) and
AICS (Australia) regulatory lists.
All MOLD WIZ, CLEAN WIZ & XTEND products are proprietary, complex mixtures which, according to
government regulations, are not required to be registered.
16. OTHER INFORMATION
THIS DATA IS OFFERED IN GOOD FAITH AS TYPICAL VALUES AND NOT AS A PRODUCT SPECIFICATION.
NO WARRANTY, EITHER EXPRESSED OR IMPLIED, IS H EREBY MADE. THE RECOMMENDED INDUSTRIAL
HYGIENE AND SAFE HANDLING PROCEDURES ARE BELIEVED TO BE GENERALLY APPLICABLE. HOWEVER,
EACH USER SHOULD REVIEW RECOMMENDATIONS IN THE SPECIFIC CONTEXT OF THE INTENDED USE
AND DETERMINE WHETHER THEY ARE APPROPRIAT E.
_________________________________________________________________________________________________________