SAFETY DATA SHEET
1. Identification
TR-110 Seal Wax /TR-111 Slurry Wax (TR-111CS & WRW)Product identifier
Other means of identification
MR110, MR111, MR111-CS & MR-WRWProduct code
Release agent.Recommended use
None known.Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
TR Industries a Division of Granitize Products Inc.Company name
11022 Vulcan StreetAddress
South Gate, CA 90280-0893
United States
(562) 923-5438Telephone
CHEMTREC: (800) 424-9300Emergency telephone
CHEMTREC International: 00 1-703-527-3887
2. Hazard(s) identification
Category 2Flammable solidsPhysical hazards
Category 3 narcotic effectsSpecific target organ toxicity, single exposureHealth hazards
Not classified.OSHA defined hazards
Label elements
Signal word Warning
Hazard statement Flammable solid. May cause drowsiness or dizziness.
Precautionary statement
Prevention Keep away from heat/sparks/open flames/hot surfaces. – No smoking. Ground/bond container and
receiving equipment. Use explosion-proof electrical/ventilating/lighting// equipment. Avoid
breathing vapors. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective
clothing/eye protection/face protection.
Response If inhaled: Remove person to fresh air and keep comfortable for breathing. In case of fire: Use
water fog, alcohol resistant foam, dry chemical powder, carbon dioxide (CO2) to extinguish. Call a
poison center/doctor if you feel unwell.
Storage Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information None.
3. Composition/information on ingredients
Mixtures
CAS numbe
r %Chemical name
64742-48-9Naphtha (petroleum), hydrotreated
heavy
70 – 90
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in
percent by volume. Components not listed are either non-hazardous or are below reportable limits.
Composition comments
TR-110 Seal Wax /TR-111 Slurry Wax (TR-111CS & WRW) SDS US
959665 Version #: 02 Revision date: 20-September-2021 Issue date: 20-September-2021
1 / 7
4. First-aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If breathing is
difficult, give oxygen. Call a poison center or doctor/physician if you feel unwell.
Inhalation
Immediately flush with plenty of water for at least 15 minutes while removing contaminated clothing
and shoes. Destroy or thoroughly clean contaminated shoes.
Skin contact
Do not rub eyes. Immediately flush eyes with plenty of water for at least 15 minutes. Continue
rinsing. Get medical attention if irritation develops and persists.
Eye contact
If vomiting occurs, keep head low so that stomach content does not get into the lungs. Get medical
attention immediately. Never give anything by mouth to a victim who is unconscious or is having
convulsions.
Ingestion
May cause drowsiness and dizziness. Narcosis. Headache. Nausea, vomiting. May cause redness
and pain.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Thermal burns: Flush with water
immediately. While flushing, remove clothes which do not adhere to affected area. Call an
ambulance. Continue flushing during transport to hospital. Keep victim warm. Keep victim under
observation. Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
Take off contaminated clothing and shoes immediately. Ensure that medical personnel are aware
of the material(s) involved, and take precautions to protect themselves. Show this safety data
sheet to the doctor in attendance. Wash contaminated clothing before re-use.
General information
5. Fire-fighting measures
Water fog. Alcohol resistant foam. Carbon dioxide (CO2). Dry chemical powder, carbon dioxide,
sand or earth may be used for small fires only.
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipment
and precautions for firefighters
In case of fire and/or explosion do not breathe fumes. Move containers from fire area if you can do
so without risk.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.Specific methods
Flammable solid.General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Remove all
possible sources of ignition in the surrounding area. Wear appropriate protective equipment and
clothing during clean-up. Ensure adequate ventilation. Use appropriate containment to avoid
environmental contamination. Transfer by mechanical means such as vacuum truck to a salvage
tank or other suitable container for recovery or safe disposal. Local authorities should be advised if
significant spillages cannot be contained. For personal protection, see section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Take
precautionary measures against static discharge. Use only non-sparking tools. This product is
miscible in water. Stop the flow of material, if this is without risk.
Large Spills: Wet down with water and dike for later disposal. Shovel the material into waste
container. Following product recovery, flush area with water.
Small Spills: Sweep up or vacuum up spillage and collect in suitable container for disposal.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Methods and materials for
containment and cleaning up
Avoid discharge into drains, water courses or onto the ground. Use appropriate containment to
avoid environmental contamination.
Environmental precautions
TR-110 Seal Wax /TR-111 Slurry Wax (TR-111CS & WRW) SDS US
959665 Version #: 02 Revision date: 20-September-2021 Issue date: 20-September-2021
2 / 7
7. Handling and storage
Provide adequate precautions, such as electrical grounding and bonding, or inert atmospheres. Do
not handle, store or open near an open flame, sources of heat or sources of ignition. Protect
material from direct sunlight. When using do not smoke. Explosion-proof general and local exhaust
ventilation. Minimize fire risks from flammable and combustible materials (including combustible
dust and static accumulating liquids) or dangerous reactions with incompatible materials. Handling
operations that can promote accumulation of static charges include but are not limited to: mixing,
filtering, pumping at high flow rates, splash filling, creating mists or sprays, tank and container
filling, tank cleaning, sampling, gauging, switch loading, vacuum truck operations. Wear
appropriate personal protective equipment. Observe good industrial hygiene practices.
Precautions for safe handling
Store locked up. Keep away from heat, sparks and open flame. Eliminate sources of ignition. Avoid
spark promoters. Ground/bond container and equipment. These alone may be insufficient to
remove static electricity. Store in a cool, dry place out of direct sunlight. Store in tightly closed
container. Store in a well-ventilated place. Keep in an area equipped with sprinklers. Store away
from incompatible materials (see Section 10 of the SDS).
Conditions for safe storage,
including any incompatibilities
8. Exposure controls/personal protection
No exposure limits noted for ingredient(s).Occupational exposure limits
No biological exposure limits noted for the ingredient(s).Biological limit values
Occupational Exposure Limits are not relevant to the current physical form of the product.Exposure guidelines
Explosion-proof general and local exhaust ventilation. Good general ventilation should be used.
Ventilation rates should be matched to conditions. If applicable, use process enclosures, local
exhaust ventilation, or other engineering controls to maintain airborne levels below recommended
exposure limits. If exposure limits have not been established, maintain airborne levels to an
acceptable level.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Wear safety glasses with side shields (or goggles).Eye/face protection
Skin protection
Wear appropriate chemical resistant gloves. Rubber gloves, butyl rubber, neoprene or PVC gloves
are recommended. Other suitable gloves can be recommended by the glove supplier.
Hand protection
Skin protection
Wear appropriate chemical resistant clothing. Use of an impervious apron is recommended.Other
If engineering controls do not maintain airborne concentrations below recommended exposure
limits (where applicable) or to an acceptable level (in countries where exposure limits have not
been established), an approved respirator must be worn. Check with respiratory protective
equipment suppliers.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.Thermal hazards
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Solid.Physical state
Solid.Form
Various.Color
Characteristic.Odor
Odor threshold Not available.
pH Not available.
Melting point/freezing pointNot available.
Initial boiling point and boiling
range
309.92 – 404.6 F (154.4 – 207 C)
Flash point 120.02 F (48.9 C)
Evaporation rate 0.1 (Butyl acetate = 1)
Flammable solid.Flammability (solid, gas)
Upper/lower flammability or explosive limits
Explosive limit – lower (%)Not available.
TR-110 Seal Wax /TR-111 Slurry Wax (TR-111CS & WRW) SDS US
959665 Version #: 02 Revision date: 20-September-2021 Issue date: 20-September-2021
3 / 7
Explosive limit – upper (%)Not available.
Vapor pressure Not available.
Vapor density 1.79 (Air = 1)
Relative density 0.81 (Water = 1)
Solubility(ies)
Solubility (water) Negligible in water.
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature Not available.
Decomposition temperature Not available.
Viscosity Not available.
Other information
Not explosive.Explosive properties
Not oxidizing.Oxidizing properties
Percent volatile 82 %
10. Stability and reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity
Material is stable under normal conditions.Chemical stability
No dangerous reaction known under conditions of normal use.Possibility of hazardous
reactions
Heat, flames and sparks. Avoid temperatures exceeding the flash point. Contact with incompatible
materials.
Conditions to avoid
Strong oxidizing agents.Incompatible materials
No hazardous decomposition products are known.Hazardous decomposition
products
11. Toxicological information
Information on likely routes of exposure
Inhalation May cause drowsiness and dizziness.
Skin contact Repeated exposure may cause skin dryness or cracking.
Eye contac
t Direct contact with eyes may cause temporary irritation.
Ingestion Ingestion may cause irritation and malaise.
Symptoms related to the
physical, chemical and
toxicological characteristics
May cause drowsiness and dizziness. Narcosis. Headache. Nausea, vomiting. May cause
redness and pain.
Information on toxicological effects
Acute toxicit
y Not expected to be acutely toxic.
Repeated exposure may cause skin dryness or cracking.Skin corrosion/irritation
May cause eye irritation on direct contact.Serious eye damage/eye
irritation
Respiratory or skin sensitization
Respiratory sensitizationNot a respiratory sensitizer.
Not a skin sensitizer.Skin sensitization
No data available to indicate product or any components present at greater than 0.1% are
mutagenic or genotoxic.
Germ cell mutagenicity
Carcinogenicity Not classifiable as to carcinogenicity to humans.
IARC Monographs. Overall Evaluation of Carcinogenicity
Naphtha (petroleum), hydrotreated heavy
(CAS 64742-48-9)
3 Not classifiable as to carcinogenicity to humans.
NTP Report on Carcinogens
Not listed.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)
Not listed.
TR-110 Seal Wax /TR-111 Slurry Wax (TR-111CS & WRW) SDS US
959665 Version #: 02 Revision date: 20-September-2021 Issue date: 20-September-2021
4 / 7
This product is not expected to cause reproductive or developmental effects.Reproductive toxicity
Specific target organ toxicity –
single exposure
May cause drowsiness and dizziness.
Specific target organ toxicity –
repeated exposure
Not classified.
Aspiration hazard Not relevant, due to the form of the product.
Chronic effects Prolonged inhalation may be harmful.
Further information None known.
12. Ecological information
The product is not classified as environmentally hazardous. However, this does not exclude the
possibility that large or frequent spills can have a harmful or damaging effect on the environment.
Ecotoxicity
No data is available on the degradability of any ingredients in the mixture. Persistence and degradability
No data available.Bioaccumulative potential
The product is insoluble or slightly soluble in water. Expected to have low mobility in soil.Mobility in soil
Other adverse effects The product contains volatile organic compounds which have a photochemical ozone creation
potential.
13. Disposal considerations
Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Incinerate the
material under controlled conditions in an approved incinerator. Do not incinerate sealed
containers. If discarded, this product is considered a RCRA ignitable waste, D001. Dispose of
contents/container in accordance with local/regional/national/international regulations.
Disposal instructions
Dispose in accordance with all applicable regulations.Local disposal regulations
D001: Waste Flammable material with a flash point <140 F
The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Hazardous waste code
Dispose of in accordance with local regulations. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe manner (see:
Disposal instructions).
Waste from residues / unused
products
Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Empty containers should be taken to an approved waste handling site for recycling or
disposal.
Contaminated packaging
14. Transport information
DOT
UN1325UN number
Flammable solids, organic, n.o.s. (Naphtha (petroleum), hydrotreated heavy)UN proper shipping name
4.1Class
Transport hazard class(es)
-Subsidiary risk
4.1Label(s)
IIIPacking group
NoMarine pollutant
Environmental hazards
Read safety instructions, SDS and emergency procedures before handling.Special precautions for user
A1, IB8, IP3, T1, TP33Special provisions
151Packaging exceptions
213Packaging non bulk
240Packaging bulk
IATA
UN1325UN number
Flammable solid, organic, n.o.s. (Naphtha (petroleum), hydrotreated heavy)UN proper shipping name
4.1Class
Transport hazard class(es)
-Subsidiary risk
4.1Label(s)
IIIPacking group
NoEnvironmental hazards
TR-110 Seal Wax /TR-111 Slurry Wax (TR-111CS & WRW) SDS US
959665 Version #: 02 Revision date: 20-September-2021 Issue date: 20-September-2021
5 / 7
3LERG Code
Read safety instructions, SDS and emergency procedures before handling.Special precautions for user
IMDG
UN1325UN number
FLAMMABLE SOLID, ORGANIC, N.O.S. (NAPHTHA (PETROLEUM), HYDROTREATED HEAVY)UN proper shipping name
4.1Class
Transport hazard class(es)
-Subsidiary risk
IIIPacking group
NoMarine pollutant
Environmental hazards
F-A, S-GEmS
Read safety instructions, SDS and emergency procedures before handling.Special precautions for user
Not applicable.Transport in bulk according to
Annex II of MARPOL 73/78 and
the IBC Code
15. Regulatory information
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
US federal regulations
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Not regulated.
CERCLA Hazardous Substance List (40 CFR 302.4)
Not listed.
SARA 304 Emergency release notification
Not regulated.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)
Not listed.
Toxic Substances Control Act (TSCA) All components of the mixture on the TSCA 8(b) inventory are designated
active .
SARA 302 Extremely hazardous substance
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Not listed.
YesSARA 311/312 Hazardous
chemical
Flammable (gases, aerosols, liquids, or solids)
Specific target organ toxicity (single or repeated exposure)
Classified hazard
categories
SARA 313 (TRI reporting)
Not regulated.
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Not regulated.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Not regulated.
Not regulated.Safe Drinking Water Act
(SDWA)
US state regulations
US. Massachusetts RTK - Substance List
Not regulated.
US. New Jersey Worker and Community Right-to-Know Act
Not listed.
US. Pennsylvania Worker and Community Right-to-Know Law
Naphtha (petroleum), hydrotreated heavy (CAS 64742-48-9)
US. Rhode Island RTK
Not regulated.
TR-110 Seal Wax /TR-111 Slurry Wax (TR-111CS & WRW) SDS US
959665 Version #: 02 Revision date: 20-September-2021 Issue date: 20-September-2021
6 / 7
California Proposition 65
California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material
is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. For
more information go to www.P65Warnings.ca.gov.
US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3,
subd. (a))
Naphtha (petroleum), hydrotreated heavy (CAS 64742-48-9)
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
YesAustralia Australian Inventory of Industrial Chemicals (AICIS)
YesCanada Domestic Substances List (DSL)
NoCanada Non-Domestic Substances List (NDSL)
YesChina Inventory of Existing Chemical Substances in China (IECSC)
YesEurope European Inventory of Existing Commercial Chemical
Substances (EINECS)
NoEurope European List of Notified Chemical Substances (ELINCS)
NoJapan Inventory of Existing and New Chemical Substances (ENCS)
YesKorea Existing Chemicals List (ECL)
YesNew Zealand New Zealand Inventory
YesPhilippines Philippine Inventory of Chemicals and Chemical Substances
(PICCS)
YesTaiwan Taiwan Chemical Substance Inventory (TCSI)
YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).
16. Other information, including date of preparation or last revision
20-September-2021Issue date
20-September-2021Revision date
Version # 02
NFPA ratings
02
2
TR Industries cannot anticipate all conditions under which this information and its product, or the
products of other manufacturers in combination with its product, may be used. It is the user s
responsibility to ensure safe conditions for handling, storage and disposal of the product, and to
assume liability for loss, injury, damage or expense due to improper use. The information in the
sheet was written based on the best knowledge and experience currently available.
Disclaimer
TR-110 Seal Wax /TR-111 Slurry Wax (TR-111CS & WRW) SDS US
959665 Version #: 02 Revision date: 20-September-2021 Issue date: 20-September-2021
7 / 7