SDS: 0062099
Date Prepared: 08/15/2018
SAFETY DATA SHEET
1.IDENTIFICATION
Product Name: STRETCH-VAC 250
Synonyms: None
Chemical Family: Polyurethane Film
Molecular Weight: Not applicable
Intended/Recommended Use: Film
2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable
Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
Manufacturer/Supplier product and non-emergency information:
Aerovac LLC
955-10 National Parkway, Schaumburg, Il 60173, USA
800-621-8003 (USA/Canada), +1-847-437-0200 (International)
E-mail: hse@compositesone.com
Aerovac Mondov S.r.L.
Via Vigevano 1, 12084 Mondovi, ITALY
+39 (0) 174 566200
Aerovac Toulouse SAS
1 rue de la Sausse, 31240 Saint Jean, FRANCE
+33 (0) 5 61 378989
Aerovac Keighley Ltd
500 Bradford Road, Sandbeds, Keighley, BD20 5NG, UK
+44 (0) 1274 550500
Composites One Canada ULC
1100 Rue Parent Rd, Suite 200, Saint-Bruno, QC J3V 6L8, CANADA+1-450-678-3330
EMERGENCY 24-Hour Phone Number:
CHEMTREC 800-424-9300 USA and Canada / +1-703-527-3887 International
By excessive exposure to dust, eye and respiratory tract irritation is possible.
Polymerization may occur from excessive heat, contamination or exposure to direct sunlight.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article Article
HAZARDOUS INGREDIENTS
No Hazardous Ingredients
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.
4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet
Protective Equipment:
Wear full firefighting protective clothing.
Special Hazards:
None known
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.
STRETCH-VAC 250 SDS: 0062099 Date Prepared: 08/15/2018 Page 2 of 7
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.
7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: Heating or curing of unused rolls or sheets of product prior to disposal is not
recommended. Heating a large mass of product can lead to a rapid decomposition reaction, generating heat,
smoke and possibly fire.
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Room temperature
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
None recommended
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed. Barrier creams may help to protect the exposed areas of the skin, they should however not be
applied once exposure has occurred.
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.
No values have been established.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: blue
Appearance: plastic bags
Odor: odorless
Boiling Point: Not available
Melting Point: 150 – 200 C 302 – 392 F
Page 3 of 7STRETCH-VAC 250 SDS: 0062099 Date Prepared: 08/15/2018
9. PHYSICAL AND CHEMICAL PROPERTIES
Vapor Pressure: Not applicable
Specific Gravity/Density: 1.0 – 1.3
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not available
Saturation In Air (% By Vol.):Not available
Evaporation Rate: Not available
Solubility In Water: Insoluble
Volatile Organic Content: Not available
Flash Point: >210 C 410 F
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:Not applicable
Decomposition Temperature: Not available
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not available
Kst (bar-m/sec): Not available
Maximum Explosion Pressure (Pmax): Not available
Dust Class: Not available
Minimum Ignition Energy (MIE) (mJ): Not available
Minimum Ignition Temperature (MIT) ( C): Not available
Minimum Explosive Concentration (MEC) (g/m
3
): Not available
Limiting Oxygen Concentration (LOC) (%): Not available
10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Polymerization: Will not occur
Materials To Avoid: No hazardous reactions known.
Hazardous Decomposition
Products:
aldehydes
Carbon dioxide
hydrogen cyanide (HCN)
nitrogen oxides
hydrocarbons
nitriles
Carbon monoxide
11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
ACUTE TOXICITY DATA
Page 4 of 7STRETCH-VAC 250 SDS: 0062099 Date Prepared: 08/15/2018
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
This product contains no OSHA regulated (hazardous) components.
12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
This material is not classified as dangerous for the environment.
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Ames Salmonella Assay
rat
No data
Acute LC50 4 hr .Not an expected route of
exposure
rat
Acute Irritation
Acute LD50
skin Not irritating
Page 5 of 7
.Not an expected route of
exposure
Acute Irritation eye
STRETCH-VAC 250
Not an expected route of
exposure
dermal
SDS: 0062099
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization respiratory
.>2000 mg/kg
Not an expected route of
exposure
Date Prepared: 08/15/2018
inhalation
oral
No Hazardous Ingredients
13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.
14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods Not applicable/Not regulated
ICAO / IATA
Dangerous Goods Not applicable/Not regulated
IMO
Dangerous Goods Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
European Economic Area (including EU): This product is an article that does not intentionally release substances
under normal conditions of use and is therefore exempt from the registration requirements under the REACH
Regulation (EC) No. 1907/2006.
Date Prepared: 08/15/2018 Page 6 of 7STRETCH-VAC 250 SDS: 0062099
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Ph ilippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: New Product
Date Prepared: 08/15/2018
Date of last significant revision:08/14/2018
verification. Before using any product, read its label.
Date Prepared: 08/15/2018 Page 7 of 7STRETCH-VAC 250 SDS: 0062099
Prepared By: Legal & Compliance Services; E-mail: hse@compositesone.com
Users Responsibility/Disclaimer of Liability
Information contained herein is believed to be true and accurate but all statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof.
Compliance with all applicable federal, state and local laws and local regulations remains the responsibility of the user. This safety data sheet
cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to
determine if, or where, additional precautions may be necessary. All health and safety information contained in this safety data sheet should be
provided to your employees or customers. It is your responsibility to develop appropriate work practice guidelines and employee instructional
programs for your operation.