Able Industrial Products, Inc.
SAFETY DATA SHEET
1. PRODUCT IDENTIFICATION
TRADE NAME:
OTHER MEANS OF
IDENTIFICATION:
RECOMMENDED USE OF
PRODUCT:
SUPPLIER’S DETAILS:
EMERGENCY CONTACT:
AMT135P
Mold-making Rubber
Able Industrial Products Inc.
2006 S Baker Ave, Onatrio Ca.9I76L
Telephone: (800) 423-7008
(909)930-1s85 Fax: (909) 930-1s87
CHEMTREC (24 Hours): 1-800-424-9300
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATTON
PHYSICAL HAZARDS
HEALTH HAZARDS
ENVIRONMENTAL HAZARDS
GHS LABEL ELEMENTS
PICTOGRAMS
SIGNAL WORDS
HAZARD STATEMENTS
PR ECA UTIONA R Y STATEM EN TS
IPREVENTIONJ
IRESPONSEJ
[sroRAGEJ
[DISPOSALJ
Not Classified
Not Classified
Not Classified
one
one
one
one
one
one
N
N
N
N
N
N
None
3. COMPOSTTION AND INFORMATION ON INGREDIENTS
Substance or Mixture
Hazardous
Mixture
CAS#
None
GHS GT2135 printed: 0I11712020 page 1 of 5
Able IndustrialProducts , Inc.
SAFETY DATA SHEET
4. FIRST AID MEASURES
INGESTTON:
SKIN CONTACT:
INHALATION:
EYE CONTACT:
PROTECTION FOR FIRST-
AIDERS:
Seek medical attention; Do NOT induce vomiting.
Remove contaminated clothing immediately and dispose of safely.
When in contact with the skin, clean with soap and water.
No first aid should be needed. Remove to fresh air.
Immediately flush with COOL water for 15 minutes; Call a physician
if irritation persists.
A rescuer should wear personal protective equipment, such as
rubber gloves and air-tight goggles
5. FIRE-FIGHTING MEASURES
SUITA B L E EXTIN G UISHIN G
MEDIA:
SPECIFIC FIRE HAZARDS:
FIREFIGHTER EQUIPMENT:
Foam, Carbon Dioxide, Dry Chemical
Fire will form hazardous combustion gases of Carbon dioxide(COz)
and Carbon Monoxide(CO)
Product contains silicone, which is known to produce formaldehyde
when temperatures reach in excess of 150oC. Formaldehyde is a
known skin, eye, and throat irritant as well as a potential cancer
hazard
Wear respirator and all protective coverinqs.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECATTONS,
PROTECTIVE EQ UIPMENT AN D
EMERGENCY:
ENVIRONMENTAL
PRECAUTIONS:
CLEAN UP:
Safety glasses and gloves are suggested to prevent eye and skin
contact. Provide sufficient ventilation.
Prevent product from entering drains.
Absorb spilled material with suitable absorbent (e,9.
clay absorbent) and disposed of, in accordance with
laws and regulations.
rag, dry sand,
appropriate
7. HANDLING AND STORAGE
HANDLING:
STORAGE:
Wear protective equipment; Avoid contact with skin and eyes.
Keep container tightly closed. Store in a cool, dry place, Keep away
from oxidizinq material.
B. EXPOSURE CONTROLS AND PERSONAL PROTECTION
EXPOSURE LIMITS:
Hazardous CAS#
inlt/. e! U(
L
None
GHS GT2135 printed: 0t1I712020 page 2 of 5
Able Industrial Products, Inc.
SAFETY DATA SHEET
ENGINEERING CONTROLS:
PERSONAL PROTECTIVE
EQUIPMENT:
R ES PI RATO R Y PR OTECTIO N :
HAND PROTECTION
EYE PROTECTION
SKIN AND BODY PROTECNON
None Available
No required under normal use
Protective gloves
Wear safety glasses or goggles. Face shield if situation requires
Protective clothinq if situation requires
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE:
ODOR:
ODOR THRESHOLD:
pH:
MELTING POTNT:
BOILING POINT RANGE:
FLASH POINT:
EVAPORATTON RATE:
FLA M MA B I L I TY(so I i d /
g a s) :
EXPLOSION LIMITS:
UPPER
LOWER
VAPOR PRESSURE:
UAPOR DENSTTY:
RELATIVE DENSITY:
SOLUBILITM
PA RTITIO N CO E FFICI E N T: N –
ocTANOL/WATER:
A UTO-IGNITIO N TEM PE RATU R E :
DECOMPO$TION
TEMPERATURE:
VTSCOSITY:
Flowable Paste
No Odor
Not Available
Not Available
Not Available
Not Applicable, will decompose before it will boil
>205oF (Setaflash)
Not Available
Not Available
Not Available
Not Available
<0.1mbar @ 6BoF
All vapors are denser than air
1.0 g/ml
Not soluble in water
Not Available
Not Available
>1500c
Not Available
10. STABILITY AND REACTIVITY
REACTTVITY:
CHEMICAL STABILITY:
HAZARDOUS REACTTONS:
CONDITIONS TO AVOID:
HAZA RDOUS D ECO M POSITION
PRODUCTS:
Product is designed to react with a silicone hydride curing agent in
the presence of a platinum catalyst.
Stable in the absence of contamination
None
Avoid contact with strong acid.
Hazardous combustion gases of Carbon dioxide(COz), Carbon
Monoxide(CO), SiOz.
Product contains silicone, which is known to produce formaldehyde
when temperatures reach in excess of 150oC. Formaldehyde is a
known skin, eye, and throat irritant as well as a potential cancer
hazard
TNCOMPATIBTLITY: Acidsalkalis
1 1. TOXICOLOGICAL INFORMATION
GHS GT2135 printed: 0L1I712020 page 3 of 5
Able Industrial Products, Inc.
SAFETY DATA SHEET
ACUTE TOXICITY:
sKI N CO R R OSr O N / r R Rr TATIO N :
EYE DAMAGEfiRRITATION:
RESPIRATORY OR SKIN
SENSITATION:
GERM CELL MUTAGENICTTY:
CARCINOGENICITY:
R E P R O D U CTI VE TOXICITY:
STOST- SINGLE EXPOSURE:
STOST. REPEATED EXPOSURE:
ASPIRATION HAZARD:
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
12. ECOLOGICAL INFORMATION
ECOTOXICTTY:
P E R SISTE N C E/ D E G RA DA BI LI TY:
BIOA CC U M U LATI VE POTEN TIA L :
MOBILITY IN SOIL:
Do not allow to enter soil, waterways or waste water canal, It is
not allowed to be released into biological sewage treatment plants.
Ecological data is not available
Not Available
Not Available
Not Available
13, DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations
when disposing of the substance.
14. TRANSPORT INFORMATION
UN/NA Number:
DOTSHTPPING NAME:
DOT HAZARD CLASS:
IMDG –
P.S.N.:
LMDG –
CLASS:
hMDG –
PACKING GROUP:
IMDG –
Marine Pollutant:
IATA. P,S.N.:
IATA – CLASS:
IATA – PACKING GROUP:
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
This product and its ingredients are NOT considered dangerous goods according to the UN Model
Resulations, ADR,RID, and the ADN.
15, REGULATORY INFORMATION
GHS GT2135 printed: 0I1L712020 page 4 of 5
Able Industrial Products, Inc.
SAFETY DATA SHEET
US REGULATIONS
US SARA REPORTING REQUIREMENIS.’The components of this product are subject to the repofting
requirements of Section 302,304, and 313 of Title III of the Superfund Amendments and Reauthorization
Act, and are listed as follows:
Hazardous Ingredient
None
SARA 302
(40 cFR 355
SARA 304 SARA 313
(40 CFR Table (40 CFR 372,6s)
Jq2_.9
No NoNo
U.S, SARA THRESHOLD PLANNING QUANTITY: There are no specific Threshold Planning Quantities for
the components of this product. The default Federal MSDS submission and inventory requirement filing
threshold of 10,000 lbs(4,540 kg) therefore applies, per 40 CFR 370.20
U,s. CEROLA REPORTABLE QUANTITY
(RQ): None
SARA 311/312(40 CFR 370) HAZARDS: Acute: No, Chronic: No, Fire: No, Pressure: No
CALIFORNIA, (PROPO$TION 65,).’Neither this product nor its ingredients are listed
TSCA INVENTORY STATLIS: These materials or all of their contents are listed on the Toxic Substanc s
Control Act (TSCA),
CANADIAN DSL/NDSL INVENTORY:Te components of this product are on the DSL or NDSL
Inventories.
AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES(AICS) STATUS: The components of this
product are listed on the AICS
KOREAN INVENTORY:ThC COMoonents of this oroduct are listed or exempted
16. OTHER INFORMATION
HMIS Rating: Health-1, Fire-O, Reactive-O
Because the product is a mixture, the majority of the data used was transferred from the safety data sheets of
the product’s hazardous ingredients, whose manufacturer identity we wish to remain anonymous for
competitive reasons.
We believe the above information is correct as of the date of this MSDS. However, as this information and the
conditions under which the product are used are beyond the control of GT PRODUCTS, INC., it is the user’s
obligation to determine the conditions for the safe use of the product. No warranty, expressed or implied, is
hereby made,
Date Created/Revised: Ll L7 12020 Made By: Rick Viramontes
GHS GT2135 printed: 0UL712020 page 5 of 5