Able Industrial Products, Inc.
SAF,ETY DATA SHEET
1. PRODUCT IDENTIFICATION
TRADE NAME:
OTHER MEANS OF
TDENTIFICATTON:
RECOMMENDED USE OF
PRODUCT:
SUPPLIERS DETAILS:
EMERGENCY CONTACT:
AMT242-0I GT6t42
Condensation Cure Base
Able Industrial Products
2006 S Baker Ave
Ontario, Calif.91761
1-909-930-1585
Fax 1-909-930-1587
CHEMTREC (24 Hours): 1-800-424-9300
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATION
PHYSICAL HAZARDS
HEALTH HAZARDS
ENVIRONMENTAL HAZARDS
GHS LABEL ELEMENTS
PICTOGRAMS
SIGNAL WORDS
HAZARD STATEMENTS
P R ECA U NO NA R Y STA TE M E N TS
IPREVENTTONJ
IRESPONSEJ
[SToRAGEJ
Not Classified
Reproductive Toxicity – Category 2
Not Classified
Warning
H361: Suspected of damaging fertility
P201: Obtain special instructions before use
P202: Do not handle until all safety precautions have been read
and understood
P2B1 : LJse personal protective equipment as required
P30B+313: IF exposed or concerned: Get medical advice/attention
P405: Store locked up
AMr z4z AMT 242 DArA Sheet printed: I2l30l2L page 1 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
[DrsPosALl P501-Dispose of contents/container through a waste management
company authorized by the local government.
3, COMPOSITION AND INFORMATION ON INGREDIENTS
Substance or Mixture
Hazardous
Octa methylcyclotetrasi loxa ne
Mixture
CAS#
556-67-2
67923-L9-7
<2.5o/o
I-5o/oPolydimethyl( methyl vinyl)siloxane,
hydroxyl terminated
xTitanium dioxide 13463-67-7 0.1 - 1
xThis
product in the physicalstate as sold (liquid paste) should not present a dust hazard, which is the
hazardous form of titanium dioxide, under normal conditions.
4. FIRST AID MEASURES
INGESTION:
SKIN CONTACT:
INHALATION:
EYE CONTACT:
PROTECTION FOR FTRST-
ATDERS:
Rinse mouth. Never give anything by mouth to an unconscious
person. Seek medical attention; Do NOT induce vomiting.
Remove contaminated clothing immediately and dispose of safely.
When in contact with the skin, clean with soap and water.
Remove to fresh air. Oxygen or aftificial respiration if needed. Do
not use mouth-to-mouth method if victim inhaled the substance,
Induce artificial respiration with the aid of a pocket mask equipped
with a one-way valve or other proper respiratory medical device.
Call a physician if symptoms develop or persist,
Immediately flush with COOL water for 15 minutes; Call a
physician if irritation persists.
A rescuer should wear personal protective equipment, such as
rubber gloves and air-tight goggles
5. FIRE-FIGHTING MEASURES
SUTTA B L E EXTIN G UTSHTN G
MEDIA:
SPECIFIC FTRE HAZRDS:
FIREFIGHTER EQUIPMENT:
Foam, carbon dioxide, dry chemical
Fire will form hazardous combustion gases of carbon dioxide
(COz), carbon monoxide (CO), SiOz, and oxides of nitrogen (NO").
Product contains silicone, which is known to produce
formaldehyde when temperatures reach in excess of 150oC.
Formaldehyde is a known skin, eye, and throat irritant as well as a
potential cancer hazard
Wear respirator and all protective coverinqs.
6. ACCIDENTAL RELEASE MEASURES
AMr 242 AMT 242 DArA sheet printed: L2l30l2I page 2 of 6
Able Industrial Products, Inc.
SAF'ETY DATA SHEET
PERSONAL PRECATIONT
PROTECTIVE EQ UIPM ENT AN D
EMERGENCY:
ENVIRONMENTAL
PRECAUTIONS:
CLEAN UP:
Safety glasses and gloves are suggested to prevent eye and skin
contact. Provide sufficient ventilation.
Prevent product from entering drains
Scrape up and disposed of in accordance with appropriate laws
and rcqulations.
7. HANDLING AND STORAGE
HANDLTNG:
STORAGE:
Wear protective equipment; Avoid contact with skin and eyes
Keep container tightly closed. Store in a cool, dry place. Keep
awav from oxidizinomaterial. Store locked up
B. EXPOSURE CONTROLSAND PERSONAL PROTECTION
EXPOSURE LIMITS:
Hazardous CAS#
Octamethylcyclotetrasiloxa ne
Polyd imethyl( methylvi nyl)siloxa ne,
hydroxyl terminated
Titanium dioxide
Not established
Not established.
For Respirable Dust (TWA)
TLV: 10mg/m^3 /(ACGIH),
PEL: 15mg/m^3/(OSHA)
None Available
Not required under normal use
Protective gloves
Wear safety glasses or goggles. Face shield if situation requires
556-67-2
67923-19-7
L3463-67-7
ENGINEERING CONTROLS:
PERSONAL PROTECTIVE
EQUIPMENT:
R ESPIRATOR Y PROTECTTO N :
HAND PROTECTION
EYE PROTECNON
SKIN AND BODY PROTECTION Protective clothinq if situation reouires
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE:
ODOR:
ODOR THRESHOLD:
pH:
MELTING POTNT:
BOILING POINT R.ANGE:
FLASH POINT:
EVAPORATION RATE:
FLA M MA B r LI TY(so I i d/ g a s) :
EXPLOSION LIMTTS:
UPPER
LOWER
Flowable Paste
No Odor
Not Available
Not Available
Not Available
Not Applicable, will decompose before it will boil
>2050F (Setaflash)
Not Available
Not Available
Not Available
Not Available
AMr 242 AMT 242 DArA sheet printed: I2l30l2I page 3 of 6
Able Industrial Products, Inc
SAF’ETY DATA SHEET
VAPOR PRESSURE:
VAPOR DENSITY:
RELATTVE DENSTTY:
SOLUBILITY:
PA R TTTIO N C O EFFICTE N T: N.
OCTANOL/WATER:
A UTO- I G N ITIO N TEM P E RA TU R E :
DECOMPOSTTTON
TEMPERATURE:
VISCOSITY:
Not Available
All vapors are denser than air
1.1 q/ml
Not soluble in water
Not Available
Not Available
>1500c
30,000 – cS
10. STABILIW AND REACTIVITY
REACTIVITY:
CHEMICAL STABILTW:
HAZARDOUS REACTTONS:
CONDITTONS TO AVOTD:
HAARDOUS DECOMPOSITION
PRODUCTS:
INCOMPATIBTLITY:
Product is designed to react with a catalyst to initiate
vulcanization.
Stable in the absence of contamination
None
Avoid contact with strong acids, alkalis, and oxidizing agents.
Hazardous combustion gases of carbon dioxide(COz), carbon
monoxide(CO), SiOz, and oxides of nitrogen (NO”).
Product contains silicone, which is known to produce
formaldehyde when temperatures reach in excess of 150oC,
Formaldehyde is a known skin, eye, and throat irritant as well as a
potential cancer hazard
Acids, Alkalis, Oxidizinq Aqents
1 1. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY:
sKrN coRRosroNfiRRITATrON:
E YE DA MA G E/I R RITATIO N :
RESPTRATORY OR SKTN
SENSITATTON:
GERM CELL MUTAGENICTW:
CARCTNOGENTCITY:
R EPRO D U CTTVE TOXTCTTY:
Oral- LDso(Rat): >10000m9/kg (calculated from known toxicities)
Not Available
Not Available
Not Available
Not Available
Titanium dioxide is listed by the IARC under its 28 classification. It
is also listed by the ACGIH under its 44 classification. However,
these two hazards are associated with titanium dioxide in its dust
form. As mentioned in Section 3, titanium dioxide in its current
form should not produce a dust hazard.
Octamethylcyclotetrasiloxane is suspected of damaging fertility, A
two year combined chronic/carcinogenicity assay was conducted
on octamethylcyclotetrasiloxane (D4). Fischer-344 rats were
exposed by whole body vapor inhalation 6hrlday, 5 days/week for
up to 103 weeks to 0, 10,30, 150 or 700ppm of D4. A statistically
significant increase in incidence of uterine endometrial cell
hyperplasia and uterine adenomas (benign tumors) were observed
in female rats at 700ppm. Since these effects only occurred at
700ppm, a level that greatly exceeds typical workplace or
consumer exposure, it is unlikely that industrial, commercial or
consumer uses of products containing D4 would result in a
siqnificant risk to humans.
AMr 242 AMT 242 DArA sheet printed: t2l30l2L page 4 of 6
Able Industrial Products, Inc.
SAF’ETY DATA SHEET
STOST- SINGLE EXPOSURE:
STOST- REPEATED EXPOSURE:
ASPIRATION HAZARD:
Not Available
Not Available
Not Available
12. ECOLOGICAL INFORMATION
ECOTOXTCITY:
P E R SISTE N C E / D E G RA DA B I L TTY :
BIOA CC U M U LATIVE POTENTIA L :
MOBILITY IN SOIL:
Do not allow to enter soil, waterways or waste water canal. It is
not allowed to be released into biological sewage treatment
plants. Ecological data is not available,
Not Available
Not Available
Not Available
13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a
chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local
regulations when disposing of the substance,
14. TRANSPORT INFORMATION
UN/NA Number:
DOTSHIPPING NAME:
DOT HAARD CLASS:
IMDG – P,S.N,:
IMDG –
CLASS:
fiMDG – PACKING GROUP:
IMDG – Marine Pollutant:
IATA – P.S.N,:
IATA – CLASS:
IATA
_
PACKING GROUP:
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
This product and its ingredients are NOT considered dangerous goods according to the UN Model
Requlations, ADR, RID, and the ADN.
15. REGULATORY INFORMATION
US REGULATIONS
US SARA REPORTING REQUIREMEN?’5.’The components of this product are subject to the reporting
requirements of Section 302, 304, and 313 of Title III of the Superfund Amendments and Reauthorization
Act, and are listed as follows:
Hazardous Ingredient SARA 302
(40 cFR 355
SARA 304
(40 CFR Table
SARA 313
(40 cFR 372.6s)
4) 302.4
Octa methylcyclotetrasi loxa ne
Polydimethyl(methyl vinyl)siloxane,
hydroxyl terminated
Titanium dioxide
No No No
No
No
No
No
No
No
AMr 242 AMT 242 DArA sheet printed: I2l30l2l page 5 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
U.S. SARA THRESHOLD PLANNING QUANTITY: There are no specific Threshold Planning Quantities for
the components of this product. The default Federal MSDS submission and inventory requirement filing
threshold of 10,000 lbs(4,540 kg) therefore applies, per 40 CFR 370.20
U.S. CERCLA REPORTABLE QUANTITY (RQ): None
SARA 311/312(40 CFR 37O) IIAZARDS;Acute: No, Chronic: Yes, l-ire: No, Pressure: No
CA LIFO R N IA, ( PR O PO SI TIO N 65,f .’ Tita n i u m d ioxide
TSCA INVENTORY STAIUS,’These rrtaterials or all of their contents are lisLed on the Toxic Substances
Control Act (TSCA).
CANADfAN DSL/NDSL INVENTOR L’The components of this product are on the DSL. or NDSL
Inventories.
AUSTRALIAN TNVENTORY OF CHEMICAL SUBSTANCES(AICS) STATUS: The components of this
product are listed on the AICS
KOREAN INVENTORY: The components of this product are listed or exempted.
16.OTHER INFORMATION
Because the product is a mixture, the majority of the data used was transferred from the safety data sheets of
the product’s hazardous ingredients, whose manufacturer identity we wish to remain anonymous for
competitive reasons.
We believe the above information is correct as of the date of this MSDS. However, as this information and the
conditions under which the product are used are beyond the control of GT PRODUCTS, INC., it is the user’s
obligation to determine the conditions for the safe use of the product, No warranty, expressed or implied, is
hereby made.
Date Created/Revised: I2107 I 15 Made By: Daniel Shaw
AMr 242 AMT 242 DArA sheet printed: 1213012I page 6 of 6