Able Industrial Products, Inc.
SAF,ETY DATA SHEET
1. PRODUCT IDENTIFICATION
TRADE NAME:
OTHER MEANS OF
IDENTIFICATTON:
RECOMMENDED USE OF
PRODUCT:
SUPPLIERS DETAILS:
EMERGENCY CONTACT:
AMTCAT.44OP
Curing Agent for Mold-making Rubber
Able Industrial Products
2006 S Baker Ave
Onatrio, Calif. 91761
909-930-1585
Fax 909-930-1587
CHEMTREC (24 Hours): 1-800-424-9300
2, HAZARDS IDENTIFICATION
GHS CLASSIFTCATION
PHYSICAL HAZARDS
HEALTH HAZARDS
ENVIRONMENTAL HAZARDS
GHS LABEL ELEMENTS
PICTOGRAMS
SIGNAL WORDS
HAZARD STATEMENTS
P R EA UNO NA R Y STA TE M E N TS
IPREVENTTONJ
IRESPONSEJ
[SToRAGE]
Not Classified
Skin Irritation/Corrosion – Category 3
Reproductive Toxicity – Category 2
Not Classified
Warning
H316: Causes mild skin irritation
H361: Suspected of damaging fertility or the unborn child
P201: Obtain special instructions before use
P202: Do not handle until all safety precautions have been read
and understood
P2B1: Use personal protective equipment as required
P30B+313: IF exposed or concerned: Get medical advice/attention
P332+P313-If skin irritation occursr Get medical advice/attention.
P405: Store locked up
AMTCAT440P Data Sheet (003) printed: 04108122 page 1 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
IDISPOSALJ P501-Dispose of contents/container through a waste management
company authorized by the local government.
3. COMPOSITION AND INFORMATION ON INGREDIENTS
Substance or Mixture
Hazardous
3-[(dimethylsilyl)oxy]- 1, 1,5,5-
tetramethyl-3-phenyltrisiloxa ne
Octa methylcyclotetrasiloxa ne
Mixture
CAS# (7e)
rgo27-45-7
556-67-2
5-10
0.1-1
4. FIRST AID MEASURES
INGESTION:
SKIN CONTACT:
TNHALATION:
EYE CONTACN
Never give anything by mouth to an unconscious person. Rinse
mouth out with water. Seek medical attention; Do NOT induce
vomiting.
Remove contaminated clothing immediately and dispose of safely.
When in contact with the skin, clean with soap and water.
Remove to fresh air. Oxygen or artificial respiration if needed. Do
not use mouth-to-mouth method if victim inhaled the substance.
Induce artificial respiration with the aid of a pocket mask equipped
with a one-way valve or other proper respiratory medical device.
Call a physician if symptoms develop or persist.
Immediately flush with COOL water for 15 minutes. Remove
contact lenses. Call a physician if irritation persists.
A rescuer should wear personal protective equipment, such asPROTECTION FOR FIRST-
ATDERS: rubber and air-tioht ooooles
5. FIRE-FIGHTING MEASURES
S UTTA B L E EXTIN G UISHIN G
MEDTA:
SPECIFIC FIRE HAARDS:
Foam, Carbon Dioxide, Dry Chemical
Fire will form hazardous combustion gases of Carbon dioxide(COz)
and Carbon Monoxide(CO)
Product contains silicone, which is known to produce formaldehyde
when temperatures reach in excess of 150oC. Formaldehyde is a
known skin, eye, and throat irritant as well as a potential cancer
hazard
FIREFIGHTER EQUIPMENT: Wear respirator and all orotective coverinqs
6. ACCIDENTAL RELEASE MEASURES
AMTCAT44OP Data Sheet (003) printed: 04108122 page 2 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
PERSONAL PRECATIONS,
PROTECTIVE EQUIPMENT AND
EMERGENCY:
ENVIRONMENTAL
PRECAUTIONS:
CLEAN UP:
Safety glasses and gloves are suggested to prevent eye and skin
contact. Provide sufficient ventilation.
Prevent product from entering drains
Disposeof in accordance with appropriate laws and requlations.
7. HANDLING AND STORAGE
HANDLTNG:
STORAGE:
Wear protective equipment; Avoid contact with skin and eyes.
Keep container tightly closed. Store in a cool, dry place. Keep away
from oxidizimaterialin a well-ventilated area. Store lockedUD.
B. EXPOSURE CONTROLSAND PERSONAL PROTECTION
EXPOSURE LIMITS:
Hazardous
3-[(dimethylsilyl)oxy]- 1, 1,5,5-
tetramethyl-3-phenyltrisi loxa ne
Octa methylcyclotetrasiloxa ne
ENGINEERING CONTROLS:
PERSONAL PROTECTIVE
EQUTPMENT:
R ESPIRATOR Y PR OTECTIO N :
HAND PROTECNON
EYE PROTECNON
SKIN AND BODY PROTECNON
as# 9tt
18027-45-7Not established,
Not established,556-67-2
None Available
No required under normal use
Protective gloves
Wear safety glasses or goggles. Face shield if situation requires
Protective clothinq if situation requires
9, PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE:
ODOR:
ODOR THRESHOLD:
pH:
MELTING POINN
BOILING POTNT RANGE:
FLASH POINN
EVAPORATION R.ATE:
FLA M MA B I LITY(s o I id /
g a s) :
EXPLOSTON LTMTTS:
UPPER
LOWER
VAPOR PRESSURE:
VAPOR DENSITY:
RELATIVE DENSITY:
SOLUBTLITY:
PARTITTON COEFFICIENT: N.
Liquid
No Odor
Not Available
Not Available
Not Available
Not Applicable, will decompose before it will boil
>2050F
Not Available
Not Available
Not Available
Not Available
<0.1mbar @ 6BoF
All vapors are denser than air
1.0 g/ml
Not soluble in water
AMTCAT440P Data Sheet (003) printed: 04108122 page 3 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
OCTANOL/WATER:
A UTO - IG N ITTO N TEM P ERA TU R E :
DECOMPOSITION
TEMPERATURE:
VISCOSTTY:
Not Available
Not Available
> 1500c
12,000 cP
10. STABILITY AND REACTIVIW
REACTIVITY:
CHEMICAL STABILITY:
HAZARDOUS REACTIONS:
CONDITIONS TO AVOID:
HAZARDOUS D ECOMPO$TION
PRODUCTS:
INCOMPATIBTLITY:
Product is designed to react with its counterpart base containing
vinyl functional groups in the presence of a platinum catalyst.
Stable in the absence of contamination
None
Avoid contact with strong acid.
Hazardous combustion gases of Carbon dioxide(COz), Carbon
Monoxide(CO), SiOz, Contact with acids or bases releases
flammable hydrogen gas.
Product contains silicone, which is known to produce formaldehyde
when temperatures reach in excess of 150oC. Formaldehyde is a
known skin, eye, and throat irritant as well as a potential cancer
hazard
Acids, alkalis
1 1. TOXICOLOGICAL INFORMATION
ACUTE TOXTCITY:
sKrN coR RosroNfiRRrTATroN :
EYE DA MA G E/ IR RITATT O N :
RESPIRATORY OR SKIN
SENSITATTON:
GERM CELL MUTAGENTCITY:
CARCINOGENICITY:
REPROD UCTIVE TOXICITY:
STOST- SIN G L E EXPOS U R E :
STOST. REPEATED EXPOSURE:
ASPIRATION HAARD:
Not Available
3-[(dimethylsilyl)oxy]- 1, 1, 5, 5-tetramethyl-3-phenyltrisiloxane is
listed to cause skin irritation.
Not Available
Not Available
Not Available
Contains no known ingredients above the 0.lolowt threshold that
are listed as a carcinogen by IARC, ACGIH, NTP, or OSHA..
Suspected of damaging fertility or the unborn child. A two year
combined chronic/carcinogenicity assay was conducted on
octamethylcyclotetrasiloxane (D4). Fischer-344 rats were exposed
by whole body vapor inhalation 6 hours/day, 5 days/week for up to
103 weeks to 0, 10, 30, 150 or 700 ppm of D4. A statistically
significant increase in incidence of uterine endometrial cell
hyperplasia and uterine adenomas (benign tumors) were observed
in female rats at 700 ppm. Since these effects only occurred at 700
ppm, a level that greatly exceeds typical workplace or consumer
exposure/ it is unlikely that industrial, commercial or consumer uses
of products containing D4 would result in a significant risk to
humans.
3-[(dimethylsilyl)oxy] – 1, 1, 5, 5-tetramethyl-3-phenyltrisi loxane is
listed to may cause respiratory irritation through inhalation
Not Available
Not Available
12. ECOLOGICAL INFORMATION
AMTCAT44OP Data Sheet (003) printed: 04108122 page 4 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
ECOTOXICITY:
P E RSISTE N CE/ D EG RA DA BI LITY:
BIOA CC U M U LA TI VE PO TENTIA L :
MOBTLTTY TN SOTL:
Components Species Test Results
Octamethylcyclotetrasiloxane (CAS 556-67-2)
Aquatic
Fish LC50 Rainbow trout,donaldson trout 0.0085 – 0.013 mg/|, 14 days
Not Available
Partition coefficient n-octanol / water (log Kow)
Octa m ethylcyclotetrasiloxa ne (CAS 556-67 -2) 6.48, (25. 1’C
)
Not Available
13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations
when disposing of the substance.
14. TRANSPORT INFORMATION
UN/NA Number: Not Regulated
DOTSHIPPING NAME:
DOT HAZARD CLASS:
IMDG –
P.S,N.:
fiMDG _
CLASS:
EMDG – PACKING GROUP:
LMDG –
Marine Pollutant:
IATA – P.S.N.:
IATA. CLASS:
IATA –
PACKING GROUP:
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
Not Regulated
This product and its ingredients are NOT considered dangerous goods according to the UN Model
Regulations, ADR, RID, and the ADN.
15. REGULATORY INFORMATION
US REGULATIONS
US SARA REPORTfiNG REQUIREMENIS.’The components of this product are subject to the repoding
requirements of Section 302, 304, and 313 of Title III of the Superfund Amendments and Reauthorization
Act, and are listed as follows:
Hazardous Ingredient SARA 302
(40 cFR 3s5
SARA 304
(40 CFR Table
SARA 313
(40 cFR 372.65)
302,
3-[(dimethylsilyl)oxy]-1,1,5,5- No No No
tetramethyl-3-phenyltrisiloxane
Octamethylcyclotetrasiloxane No No No
U.S, SARA THRESHOLD PLANNLNG QUANTITY: There are no specific Threshold Planning Quantities for
the components of this product. The default Federal MSDS submission and inventory requirement filing
threshold of 10,000 lbs(4,540 kg) therefore applies, per 40 CFR 370.20
U.S. CERCLA REPORTABLE QUANTITY (RQ): None
AMTCAT440P Data Sheet (003) printed: 04108122 page 5 of 6
Able Industrial Products, Inc.
SAFETY DATA SHEET
SARA 311/372(40 CFR 37O) HAZARDS; Acute: Yes, Chronic: Yes, Fire: No, Pressure: No
cA LLFO RNr+ (PROPOSITION 65,).. None
TSCA INVENTORY STATUS: These materials or all of their contents are listed on the Toxic Substances
Control Act (TSCA),
16, OTHER INFORMATION
HMIS Rating: Health-2, Fire-O, Reactive-O
Because the product is a mixture, the majority of the data used was transferred from the safety data sheets of
the product’s hazardous ingredients, whose manufacturer identity we wish to remain anonymous for
competitive reasons.
We believe the above information is correct as of the date of this MSDS. However, as this information and the
conditions under which the product are used are beyond the control of GT PRODUCTS, INC., it is the user’s
obligation to determine the conditions for the safe use of the product. No warranty, expressed or implied, is
hereby made.
Date Created/Revised: 2l 13l IB Made By: Daniel Shaw
AMTCAT44OP Data Sheet (003) printed: 04108122 page 6 of 6