CLEAR URETHANE SEALER PART A
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/13/2018EN (English US)Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixturesTrade name :CLEAR URETHANE SEALER PART ACAS-No. :mixtureProduct code :5604-002AFormula :na
1.2. Recommended use and restrictions on use
Use of the substance/mixture :COATING
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids
Category 3
H226 Flammable liquid and vaporCarcinogenicity Category 2H351 Suspected of causing cancerReproductive toxicity
Category 2
H361 Suspected of damaging fertility or the unborn childSpecific target organ
toxicity (single exposure)
Category 3
H336 May cause drowsiness or dizzinessSpecific target organ
toxicity (repeated exposure)
Category 1
H372 Causes damage to organs through prolonged or repeated exposure
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02GHS07GHS08
Signal word (GHS-US) :DangerHazard statements (GHS-US) :H226 – Flammable liquid and vapor
H336 – May cause drowsiness or dizziness
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) :P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
CLEAR URETHANE SEALER PART A
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/13/2018EN (English US)2/11 P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust, fume, mist, spray, vapors
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P280 – Wear eye protection, protective clothing, protective gloves
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P308+P313 – If exposed or concerned: Get medical advice/attention
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to in accordance with local, state, and federal regulations.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%GHS-US classificationn-butyl acetate(CAS-No.) 123-86-4<= 38Flam. Liq. 3, H226
STOT SE 3, H336
Saturated Polyester Resin(CAS-No.) TRADE SECRET<= 25Not classified2-methoxy-1-methylethyl acetate(CAS-No.) 108-65-6<= 23Not classifiedProprietary Resin(CAS-No.) TRADE SECRET<= 15Not classifiedacetone(CAS-No.) 67-64-1<= 12Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H336
styrene, inhibited(CAS-No.) 100-42-5<= 3Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF
exposed or concerned: Get medical advice/attention.
First-aid measures after inhalation :Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a
POISON CENTER or doctor/physician if you feel unwell.
First-aid measures after skin contact :Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention.
Specific treatment (see seek medical attention. on this label). Remove/Take off immediately all
contaminated clothing. Rinse skin with water/shower.
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention. Rinse immediately with plenty of water. Obtain medical attention if
pain, blinking or redness persists.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
CLEAR URETHANE SEALER PART A
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/13/2018EN (English US)3/11
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects :May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to
organs through prolonged or repeated exposure.
Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause drowsiness or dizziness.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
No additional information available
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Foam. Dry powder. Carbon dioxide. Water spray. Sand.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard :Highly flammable liquid and vapor. Flammable liquid and vapor.Explosion hazard :May form flammable/explosive vapor-air mixture.Reactivity :No reactivity hazard other than the effects described in sub-sections below.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures :Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1.For non-emergency personnel
Protective equipment :Gloves. Protective goggles. Protective clothing.Emergency procedures :Evacuate unnecessary personnel.
6.1.2.For emergency responders
Protective equipment :Equip cleanup crew with proper protection. Avoid breathing dust/fume/gas/mist/vapors/spray.Emergency procedures :Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Dam up the liquid spill. Contain released product, pump into suitable containers.Methods for cleaning up :Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed :Handle empty containers with care because residual vapors are flammable.Precautions for safe handling :Eliminate all ignition sources if safe to do so. Wash hands and other exposed areas with mild
soap and water before eating, drinking or smoking and when leaving work. Provide good
ventilation in process area to prevent formation of vapor. No open flames. No smoking. Take
precautionary measures against static discharge. Use only non-sparking tools. Obtain special
instructions before use. Do not handle until all safety precautions have been read and
understood. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-
ventilated area. Do not breathe dust/fume/gas/mist/vapors/spray.
Hygiene measures :Do not eat, drink or smoke when using this product. Wash hands, forearms and face thoroughly
after handling.
CLEAR URETHANE SEALER PART A
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/13/2018EN (English US)4/11
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/
equipment.
Storage conditions :Keep in fireproof place. Keep only in the original container in a cool, well ventilated place away
from : Keep container tightly closed.
Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)ACGIHACGIH TWA (ppm)20 ppm (Styrene, monomer; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIHACGIH STEL (ppm)40 ppm (Styrene, monomer; USA; Short time value;
TLV - Adopted Value)
Proprietary Resin (TRADE SECRET)Not applicablen-butyl acetate (123-86-4)ACGIHACGIH TWA (ppm)150 ppm (n-Butyl acetate; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIHACGIH STEL (ppm)200 ppm (n-Butyl acetate; USA; Short time value; TLV
- Adopted Value)
Saturated Polyester Resin (TRADE SECRET)Not applicableacetone (67-64-1)ACGIHACGIH TWA (ppm)500 ppm (Acetone; USA; Time-weighted average
exposure limit 8 h; TLV - Adopted Value)
ACGIHACGIH STEL (ppm)750 ppm (Acetone; USA; Short time value; TLV -
Adopted Value)
2-methoxy-1-methylethyl acetate (108-65-6)Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available).
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Avoid all unnecessary exposure.
Hand protection:Wear protective glovesEye protection:Chemical goggles or safety glassesSkin and body protection:Wear suitable protective clothing
Respiratory protection:Where exposure through inhalation may occur
from use, respiratory protection equipment is
recommended
CLEAR URETHANE SEALER PART A
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/13/2018EN (English US)5/11
Other information:Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Color :clear
Odor :characteristic
Odor threshold :No data available
pH :No data available
Melting point :No data available
Freezing point :No data available
Boiling point :>= 56.1 C
Flash point :>= -20 C
Relative evaporation rate (butyl acetate=1) :No data available
Flammability (solid, gas) :Highly flammable liquid and vapor. Flammable liquid and vapor.
Vapor pressure :No data available
Relative vapor density at 20 C :No data available
Relative density :No data available
Specific gravity / density :1Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :No data available
Viscosity, dynamic :No data available
Explosion limits :No data available
Explosive properties :No data available
Oxidizing properties :No data available
9.2. Other information
VOC content :<= 572 g/l
SECTION 10: Stability and reactivity
10.1.Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2.Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Highly flammable liquid and vapor. Not established. Flammable liquid and
vapor. May form flammable/explosive vapor-air mixture.
10.3.Possibility of hazardous reactions
Not established.
10.4.Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks.
10.5.Incompatible materials
Strong acids. Strong bases.
10.6.Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity :Not classified
CLEAR URETHANE SEALER PART A
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/13/2018EN (English US)6/11styrene, inhibited (100-42-5)LD50 oral rat5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)LD50 dermal rat2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit5010 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)12 mg/l/4h (Rat; Literature study)LC50 inhalation rat (ppm)2770 ppm/4h (Rat; Literature study)ATE US (oral)5000.000 mg/kg body weightATE US (dermal)2820.000 mg/kg body weightATE US (gases)2770.000 ppmV/4hATE US (vapors)12.000 mg/l/4hATE US (dust, mist)1.500 mg/l/4hn-butyl acetate (123-86-4)LD50 oral rat10770 mg/kg (Rat; Equivalent or similar to OECD 423; Experimental value; 12789 mg/kg; Rat;
Equivalent or similar to OECD 423; Experimental value; 10760 mg/kg bodyweight; Rat)
LD50 dermal rabbit> 17600 mg/kg (Rabbit; Experimental value; Equivalent or similar to OECD 402; >14112
mg/kg bodyweight; Rabbit)
ATE US (oral)10770.000 mg/kg body weightacetone (67-64-1)LD50 oral rat5800 mg/kg (Rat; Equivalent or similar to OECD 401; Experimental value)LD50 dermal rabbit20000 mg/kg (Rabbit; Experimental value; Equivalent or similar to OECD 402; >7426 mg/kg
bodyweight; Rabbit; Weight of evidence)
LC50 inhalation rat (mg/l)71 mg/l/4h (Rat; Experimental value; 76 mg/l/4h; Rat; Experimental value)LC50 inhalation rat (ppm)30000 ppm/4h (Rat; Experimental value)ATE US (oral)5800.000 mg/kg body weightATE US (dermal)20000.000 mg/kg body weightATE US (gases)30000.000 ppmV/4hATE US (vapors)71.000 mg/l/4hATE US (dust, mist)71.000 mg/l/4h2-methoxy-1-methylethyl acetate (108-65-6)LD50 oral rat6190 mg/kg body weight (Rat; Equivalent or similar to OECD 401; Experimental value)LD50 dermal rat> 2000 mg/kg (Rat; Experimental value; Equivalent or similar to OECD 402)LD50 dermal rabbit> 2000 mg/kg body weight (Rabbit; Experimental value; Equivalent or similar to OECD 402)Skin corrosion/irritation :Not classifiedSerious eye damage/irritation :Not classifiedRespiratory or skin sensitization :Not classifiedGerm cell mutagenicity :Not classifiedCarcinogenicity :Suspected of causing cancer.styrene, inhibited (100-42-5)IARC group2B – Possibly carcinogenic to humansReproductive toxicity :Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity single exposure:May cause drowsiness or dizziness.Specific target organ toxicity repeated
exposure
:Causes damage to organs through prolonged or repeated exposure.Aspiration hazard :Not classifiedPotential Adverse human health effects and
symptoms
:Harmful if inhaled. Based on available data, the classification criteria are not met.Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause drowsiness or dizziness.
CLEAR URETHANE SEALER PART A
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/13/2018EN (English US)7/11Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
n-butyl acetate (123-86-4)LC50 fish 118 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Flow-
through system; Fresh water; Experimental value)
acetone (67-64-1)LC50 fish 25540 mg/l (LC50; EU Method C.1; 96 h; Salmo gairdneri; Static system; Fresh water;
Experimental value)
EC50 Daphnia 212600 mg/l (LC50; Other; 48 h; Daphnia magna; Static system; Fresh water; Experimental
value)
2-methoxy-1-methylethyl acetate (108-65-6)EC50 Daphnia 1380 mg/l (EC50; Equivalent or similar to OECD 202; 48 h; Daphnia magna; Static system;
Fresh water; Experimental value)
LC50 fish 2100 – 180 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Oncorhynchus mykiss;
Static system; Fresh water; Experimental value)
Threshold limit algae 1>= 1000 mg/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 96 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
Threshold limit algae 2> 1000 mg/l (EC50; OECD 201: Alga, Growth Inhibition Test; 96 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
12.2.Persistence and degradability
CLEAR URETHANE SEALER PART A (mixture)Persistence and degradabilityNot established.styrene, inhibited (100-42-5)Persistence and degradabilityReadily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD)0.42Proprietary Resin (TRADE SECRET)Persistence and degradabilityNot established.n-butyl acetate (123-86-4)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Not established.Biochemical oxygen demand (BOD)
0.15 – 0.5 g O /g substance
Chemical oxygen demand (COD)
2.32 g O /g substance
ThOD
2.21 g O /g substance
Saturated Polyester Resin (TRADE SECRET)Persistence and degradabilityNot established.acetone (67-64-1)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. No (test)data on mobility of the substance available.
Biochemical oxygen demand (BOD)
1.43 g O /g substance
Chemical oxygen demand (COD)
1.92 g O /g substance
ThOD
2.2 g O /g substance
BOD (% of ThOD)0.872 (20 days; Literature study)2-methoxy-1-methylethyl acetate (108-65-6)Persistence and degradabilityReadily biodegradable in water. Readily biodegradable in the soil. Low potential for adsorption
in soil.
CLEAR URETHANE SEALER PART A
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/13/2018EN (English US)8/11
12.3.Bioaccumulative potentialCLEAR URETHANE SEALER PART A (mixture)Bioaccumulative potentialNot established.styrene, inhibited (100-42-5)BCF fish 135.5 (BCF)Log Pow2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.Proprietary Resin (TRADE SECRET)Bioaccumulative potentialNot established.n-butyl acetate (123-86-4)BCF fish 114 (BCF)Log Pow2.3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 25
C)
Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.Saturated Polyester Resin (TRADE SECRET)Bioaccumulative potentialNot established.acetone (67-64-1)BCF fish 10.69 (BCF)BCF other aquatic organisms 13 (BCF; BCFWIN)Log Pow-0.24 (Test data)Bioaccumulative potentialNot bioaccumulative.2-methoxy-1-methylethyl acetate (108-65-6)Log Pow1.2 (Experimental value; Equivalent or similar to OECD 117; 20 C; 0.36; Experimental value;
OECD 107: Partition Coefficient (n-octanol/water): Shake Flask Method; 25 C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4).
12.4.Mobility in soil
styrene, inhibited (100-42-5)Surface tension0.032 N/m (19 C)Log KocKoc,352; Estimated value; log Koc; 2.55; Estimated valuen-butyl acetate (123-86-4)Surface tension0.0613 N/m (20 C; 1 g/l)Log Koclog Koc,SRC PCKOCWIN v2.0; 1.268 - 1.844; QSARacetone (67-64-1)Surface tension0.0237 N/m2-methoxy-1-methylethyl acetate (108-65-6)Surface tension0.0294 N/m (20 C; 100 vol %)Log Koclog Koc,0.264; QSAR
12.5.Other adverse effects
Effect on the global warming :No known effects from this product.GWPmix comment :No known effects from this product.Other information :Avoid release to the environment.
SECTION 13: Disposal considerations
13.1.Disposal methods
Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to ...
Additional information :Handle empty containers with care because residual vapors are flammable.Ecology - waste materials :Avoid release to the environment.
CLEAR URETHANE SEALER PART A
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/13/2018EN (English US)9/11
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Proper Shipping Name (DOT) :PAINTClass (DOT) :3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120Packing group (DOT) :II - Medium DangerHazard labels (DOT) :3 - Flammable liquidOther information :No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) :UN 1263 paint, 3, IIUN-No. (IMDG) :1263Proper Shipping Name (IMDG) :paintClass (IMDG) :3 - Flammable liquidsPacking group (IMDG) :II - substances presenting medium danger
Air transport
Transport document description (IATA) :UN 1263 paint, 3, IIUN-No. (IATA) :1263Proper Shipping Name (IATA) :paintClass (IATA) :3 - Flammable LiquidsPacking group (IATA) :II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)CERCLA RQ1000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
n-butyl acetate (123-86-4)CERCLA RQ5000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Delayed (chronic) health hazard
Fire hazard
acetone (67-64-1)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Not subject to reporing requirements of the United States SARA Section 313
CERCLA RQ5000 lb
CLEAR URETHANE SEALER PART A
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/13/2018EN (English US)10/11
15.2. International regulations
CANADA
No additional information available
acetone (67-64-1)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)Listed on EPA's Hazardous Air Pollutants (HAPS)
15.3. US State regulations
styrene, inhibited (100-42-5)U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Male
No significant risk
level (NSRL)
NoNoNoNo0.1 g/daystyrene, inhibited (100-42-5)U.S. - Massachusetts - Right To Know List
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) - Environmental Hazard List
acetone (67-64-1)U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
Other information :None.Full text of H-phrases:---
---
H225Highly flammable liquid and vapor---
---
H226Flammable liquid and vapor---
---
H315Causes skin irritation---
---
H319Causes serious eye irritation---
---
H332Harmful if inhaled---
---
H335May cause respiratory irritation---
---
H336May cause drowsiness or dizziness---
---
H351Suspected of causing cancer---
---
H361Suspected of damaging fertility or the unborn child---
---
H372Causes damage to organs through prolonged or repeated exposure
CLEAR URETHANE SEALER PART A
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/13/2018EN (English US)11/11NFPA health hazard :2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard :3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity :2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard RatingHealth :2 Moderate Hazard - Temporary or minor injury may occurFlammability :3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical :1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
:HPersonal protection H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.