CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 08/18/2020
08/18/2020EN (English)Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixtureTrade name :CLEAR HI-GLOSS ADDITIVECAS-No. :mixtureProduct code :904-001Formula :na
1.2. Recommended use and restrictions on use
Use of the substance/mixture :COATING
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids,
Category 2
H225 Highly flammable liquid and vapour.Skin corrosion/irritation,
Category 2
H315 Causes skin irritation.Serious eye damage/eye
irritation, Category 2
H319 Causes serious eye irritation.Skin sensitisation,
Category 1
H317 May cause an allergic skin reaction.Carcinogenicity, Category
2
H351 Suspected of causing cancer.Reproductive toxicity,
Category 2
H361 Suspected of damaging fertility or the unborn child.Specific target organ
toxicity Single exposure,
Category 3, Respiratory
tract irritation
H335 May cause respiratory irritation.Specific target organ
toxicity Repeated
exposure, Category 1
H372 Causes damage to organs through prolonged or repeated exposure.Hazardous to the aquatic
environment Acute
Hazard, Category 2
H401 Toxic to aquatic life
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labelling
Hazard pictograms (GHS US) :Signal word (GHS US) :Danger
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)2/12Hazard statements (GHS US) :H225 – Highly flammable liquid and vapour.
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H335 – May cause respiratory irritation.
H351 – Suspected of causing cancer.
H361 – Suspected of damaging fertility or the unborn child.
H372 – Causes damage to organs through prolonged or repeated exposure.
H401 – Toxic to aquatic life
Precautionary statements (GHS US) :P201 – Obtain special instructions before use.
P202 – Do not handle until all safety precautions have been read and understood.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P233 – Keep container tightly closed.
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment.
P242 – Use only non-sparking tools.
P243 – Take precautionary measures against static discharge.
P260 – Do not breathe vapours, mist, dust.
P261 – Avoid breathing spray.
P264 – Wash exposed area. thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P308+P313 – If exposed or concerned: Get medical advice/attention.
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see none listed. on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish.
P403+P233 – Store in a well-ventilated place. Keep container tightly closed.
P403+P235 – Store in a well-ventilated place. Keep cool.
P405 – Store locked up.
P501 – Dispose of contents/container to in accordance with local, state, and federal regulations.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%GHS-US classificationstyrene, inhibited(CAS-No.) 100-42-5<= 36Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Aquatic Acute 2, H401
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)3/12
Name
Product identifier % GHS-US classificationmethyl ethyl ketone(CAS-No.) 78-93-3<= 18Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H336
cobalt(II) 2-ethylhexanoate(CAS-No.) 136-52-7<= 0.9Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF
exposed or concerned: Get medical advice/attention.
First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing. Remove person to fresh air
and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. Allow
affected person to breathe fresh air. Allow the victim to rest.
First-aid measures after skin contact :Wash with plenty of water/ . Wash contaminated clothing before reuse. If skin irritation occurs:
wash throughly for five minutes. seek medical attention. Get medical advice/attention. Specific
treatment (see seek medical attention. on this label). Rinse skin with water/shower. Take off
immediately all contaminated clothing.
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Potential adverse human health effects and
symptoms
:Harmful if inhaled.Symptoms/effects :Suspected of damaging fertility or the unborn child. Causes damage to organs through
prolonged or repeated exposure. May cause genetic defects. Causes damage to organs.
Symptoms/effects after inhalation :May cause respiratory irritation. Danger of serious damage to health by prolonged exposure
through inhalation. Harmful if inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Sand. Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard :Highly flammable liquid and vapour.Explosion hazard :May form flammable/explosive vapour-air mixture.Reactivity in case of fire :No reactivity hazard other than the effects described in sub-sections below.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire fighting water from entering the environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures :Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)4/12
6.1.1.For non-emergency personnel
Protective equipment :Gloves. Protective goggles. Protective clothing.Emergency procedures :Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no
smoking.
6.1.2.For emergency responders
Protective equipment :Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures :Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Dam up the liquid spill. Contain released product, pump into suitable containers.Methods for cleaning up :Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Notify authorities if product enters sewers or public waters.
Other information :Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed :Handle empty containers with care because residual vapours are flammable.Precautions for safe handling :Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapour. No open flames. No smoking. Use only outdoors or in a well-ventilated area. Avoid
breathing DUST, FUMES, MIST, OR VAPORS. Obtain special instructions before use. Do not
handle until all safety precautions have been read and understood. Do not breathe
dust/fume/gas/mist/vapours/spray. Eliminate all ignition sources if safe to do so. Keep away
from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Ground/bond container and receiving equipment. Use only non-sparking tools. Take
precautionary measures against static discharge. Flammable vapours may accumulate in the
container. Use explosion-proof equipment. Wear personal protective equipment.
Hygiene measures :Wash HANDS thoroughly after handling. Do not eat, drink or smoke when using this product.
Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :Proper grounding procedures to avoid static electricity should be followed. Use explosion-proof
electrical, ventilating and lighting equipment. equipment. Ground/bond container and receiving
equipment.
Storage conditions :Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Store in a well-ventilated place. Keep cool. Keep
container tightly closed.
Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)ACGIHACGIH TWA (ppm)20 ppmACGIHACGIH STEL (ppm)40 ppmcobalt(II) 2-ethylhexanoate (136-52-7)Not applicable methyl ethyl ketone (78-93-3)ACGIHACGIH TWA (ppm)200 ppmACGIHACGIH STEL (ppm)300 ppm
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)5/12
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls :Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Avoid all unnecessary exposure.
Hand protection:Wear protective gloves.Eye protection:Chemical goggles or safety glasses. Safety glassesSkin and body protection:Wear suitable protective clothing
Respiratory protection:Wear appropriate mask
Other information:Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Colour :clear
Odour :characteristic
Odour threshold :No data available
pH :No data available
Melting point :>= C
Freezing point :No data available
Boiling point :>= 79.4 C
Flash point :>= 7 – 10 C
Relative evaporation rate (butylacetate=1) :No data available
Flammability (solid, gas) :Highly flammable liquid and vapour.
Vapour pressure :No data available
Relative vapour density at 20 C :No data available
Relative density :<=
Density :<= 1.05Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :No data availableViscosity, dynamic :No data available
Explosive limits :No data available
Explosive properties :No data available
Oxidising properties :No data available
9.2. Other information
No additional information available
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)6/12
SECTION 10: Stability and reactivity
10.1.Reactivity
No reactivity hazard other than the effects described in sub-sections below. Highly flammable liquid and vapour.
10.2.Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Highly flammable liquid and vapour. May form flammable/explosive
vapour-air mixture.
10.3.Possibility of hazardous reactions
Not established.
10.4.Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of
ignition.
10.5.Incompatible materials
Strong acids. Strong bases.
10.6.Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity (oral) :Not classifiedAcute toxicity (dermal) :Not classifiedAcute toxicity (inhalation) :Not classifiedstyrene, inhibited (100-42-5)LD50 oral rat5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)LD50 dermal rat> 2000 mg/kg bodyweight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal)
LD50 dermal rabbit5010 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)11.8 mg/l air (4 h, Rat, Inconclusive, insufficient data, Inhalation (vapours))LC50 inhalation rat (ppm)2770 ppm/4h (Rat; Literature study)ATE US (oral)5000 mg/kg bodyweightATE US (dermal)5010 mg/kg bodyweightATE US (gases)2770 ppmv/4hATE US (vapours)11 mg/l/4hATE US (dust,mist)1.5 mg/l/4hcobalt(II) 2-ethylhexanoate (136-52-7)LD50 oral rat3129 mg/kg bodyweight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat> 2000 mg/kg bodyweight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)ATE US (oral)3129 mg/kg bodyweightmethyl ethyl ketone (78-93-3)LD50 oral rat2193 mg/kg bodyweight (Equivalent or similar to OECD 423, Rat, Male / female, Read-across,
Oral)
LD50 dermal rabbit> 10 ml/kg (Equivalent or similar to OECD 402, 24 h, Rabbit, Male, Experimental value,
Dermal)
ATE US (oral)2193 mg/kg bodyweightSkin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Causes serious eye irritation.Respiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Suspected of causing cancer.styrene, inhibited (100-42-5)IARC group2B – Possibly carcinogenic to humansNational Toxicology Program (NTP) StatusReasonably anticipated to be Human Carcinogen
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)7/12cobalt(II) 2-ethylhexanoate (136-52-7)IARC group2B – Possibly carcinogenic to humansReproductive toxicity :Suspected of damaging fertility or the unborn child.STOT-single exposure :May cause respiratory irritation.styrene, inhibited (100-42-5)STOT-single exposureMay cause respiratory irritation.methyl ethyl ketone (78-93-3)STOT-single exposureMay cause drowsiness or dizziness.STOT-repeated exposure :Causes damage to organs through prolonged or repeated exposure.styrene, inhibited (100-42-5)STOT-repeated exposureCauses damage to organs through prolonged or repeated exposure.Aspiration hazard :Not classifiedViscosity, kinematic :No data availablePotential adverse human health effects and
symptoms
:Harmful if inhaled.Symptoms/effects :Suspected of damaging fertility or the unborn child. Causes damage to organs through
prolonged or repeated exposure. May cause genetic defects. Causes damage to organs.
Symptoms/effects after inhalation :May cause respiratory irritation. Danger of serious damage to health by prolonged exposure
through inhalation. Harmful if inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
Ecology – general :The product is not considered harmful to aquatic organisms nor to cause long-term adverse
effects in the environment.
styrene, inhibited (100-42-5)LC50 fish 110 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Flow-through
system, Fresh water, Experimental value, GLP)
EC50 Daphnia 14.7 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Flow-
through system, Fresh water, Experimental value, GLP)
ErC50 (algae)4.9 mg/l (EPA OTS 797.1050, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, GLP)
cobalt(II) 2-ethylhexanoate (136-52-7)LC50 fish 146.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 10.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)LC50 fish 254.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 20.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)Threshold limit algae 1144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 232.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
methyl ethyl ketone (78-93-3)LC50 fish 12993 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Static system,
Fresh water, Experimental value, GLP)
EC50 Daphnia 1308 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)
ErC50 (algae)1972 mg/l (OECD 201: Alga, Growth Inhibition Test, 72 h, Pseudokirchneriella subcapitata,
Static system, Fresh water, Experimental value, GLP)
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)8/12
12.2.Persistence and degradabilityCLEAR HI-GLOSS ADDITIVE (mixture)Persistence and degradabilityNot established.styrene, inhibited (100-42-5)Persistence and degradabilityBiodegradable in the soil. Readily biodegradable in water.Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD)0.42 (Literature study)cobalt(II) 2-ethylhexanoate (136-52-7)Persistence and degradabilityReadily biodegradable in water. No (test)data on mobility of the substance available.methyl ethyl ketone (78-93-3)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD)
2.03 g O /g substance
Chemical oxygen demand (COD)
2.31 g O /g substance
ThOD
2.44 g O /g substance
12.3.Bioaccumulative potential
CLEAR HI-GLOSS ADDITIVE (mixture)Bioaccumulative potentialNot established.styrene, inhibited (100-42-5)BCF fish 135.5 (Carassius auratus, Literature study)Log Pow2.96 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 25 C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4).cobalt(II) 2-ethylhexanoate (136-52-7)BCF fish 11.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500).methyl ethyl ketone (78-93-3)Log Pow0.3 (Experimental value, OECD 117: Partition Coefficient (n-octanol/water), HPLC method, 40
C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.
12.4.Mobility in soil
styrene, inhibited (100-42-5)Surface tension0.032 N/m (20 C)Log Koc2.55 (log Koc, Estimated value)Ecology - soilLow potential for adsorption in soil.cobalt(II) 2-ethylhexanoate (136-52-7)Surface tension0.064 N/m (20 C; 1 g/l)methyl ethyl ketone (78-93-3)Surface tension0.024 N/m (20 C)Log Koc1.53 (log Koc, Calculated value)Ecology - soilHighly mobile in soil. Slightly harmful to plants.
12.5.Other adverse effects
Other information :Avoid release to the environment.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)9/12
SECTION 13: Disposal considerations
13.1.Disposal methods
Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information :Handle empty containers with care because residual vapours are flammable. Flammable
vapours may accumulate in the container.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOTTransport document description :UN1866 Resin solution, 3, II UN-No.(DOT) :UN1866 Proper Shipping Name (DOT) :Resin solution Class (DOT) :3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120 Packing group (DOT) :II - Medium Danger Hazard labels (DOT) :3 - Flammable liquid DOT Packaging Non Bulk (49 CFR 173.xxx) :173 DOT Packaging Bulk (49 CFR 173.xxx) :242DOT Special Provisions (49 CFR 172.102) :149 - When transported as a limited quantity or a consumer commodity, the maximum net
capacity specified in 173.150(b)(2) of this subchapter for inner packagings may be increased to
5 L (1.3 gallons).
383 - Packages containing toy plastic or paper caps for toy pistols described as UN0349,
Articles, explosive, n.o.s. (Toy caps), 1.4S or NA0337, Toy caps, 1.4S are not subject to the
subpart E (labeling) requirements of this part when offered for transportation by motor vehicle,
rail freight, cargo vessel, and cargo aircraft and, notwithstanding the packing method assigned
in 173.62 of this subchapter, in conformance with the following conditions:
B52 - Notwithstanding the provisions of 173.24b of this subchapter, non-reclosing pressure
relief devices are authorized on DOT 57 portable tanks.
IB2 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite
(31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110
kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55 C (1.3 bar at 131 F) are authorized.
T4 - 2.65 178.274(d)(2) Normal............. 178.275(d)(3)
TP1 - The maximum degree of filling must not exceed the degree of filling determined by the
following: Degree of filling = 97 / (1 + a (tr - tf)) Where: tr is the maximum mean bulk
temperature during transport, and tf is the temperature in degrees celsius of the liquid during
filling.
TP8 - A portable tank having a minimum test pressure of 1.5 bar (150 kPa) may be used when
the flash point of the hazardous material transported is greater than 0 C (32 F).
DOT Packaging Exceptions (49 CFR 173.xxx):150 DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
:5 L DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
:60 L DOT Vessel Stowage Location :B - (i) The material may be stowed on deck or under deck on a cargo vessel and on a
passenger vessel carrying a number of passengers limited to not more than the larger of 25
passengers, or one passenger per each 3 m of overall vessel length; and (ii) On deck only on
passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this
section is exceeded.
Emergency Response Guide (ERG) Number :127 Other information :No supplementary information available.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)10/12
Transportation of Dangerous GoodsTransport by sea
Transport document description (IMDG) :UN 1866 RESIN SOLUTION, 3, IIUN-No. (IMDG) :1866Proper Shipping Name (IMDG) :RESIN SOLUTIONClass (IMDG) :3 - Flammable liquidsPacking group (IMDG) :II - substances presenting medium danger
Air transport
Transport document description (IATA) :UN 1866 Resin solution, 3, IIUN-No. (IATA) :1866Proper Shipping Name (IATA) :Resin solutionClass (IATA) :3 - Flammable LiquidsPacking group (IATA) :II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ1000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Reactive hazard - No
Fire hazard
Delayed (chronic) health hazard
cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the United States TSCA (Toxic Substances Control Act) inventorymethyl ethyl ketone (78-93-3)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Not subject to reporting requirements of the United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ5000 lb
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)Listed on the Canadian DSL (Domestic Substances List)cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the Canadian DSL (Domestic Substances List)methyl ethyl ketone (78-93-3)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)11/12styrene, inhibited (100-42-5)U.S. -
California -
Proposition 65
- Carcinogens
List
U.S. - California -
Proposition 65 -
Developmental
Toxicity
U.S. - California -
Proposition 65 -
Reproductive
Toxicity - Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Male
No significant risk level
(NSRL)
Maximum allowable
dose level (MADL)
YesNoNoNo27 g/dayComponentState or local regulationsstyrene, inhibited(100-42-5)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
methyl ethyl ketone(78-93-3)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date :08/18/2020Data sources :REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 16 December 2008 on classification, labelling and packaging of substances and
mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending
Regulation (EC) No 1907/2006.
Other information :None.
Full text of H-statements:H225Highly flammable liquid and vapour.H226Flammable liquid and vapour.H315Causes skin irritation.H317May cause an allergic skin reaction.H319Causes serious eye irritation.H332Harmful if inhaled.H335May cause respiratory irritation.H336May cause drowsiness or dizziness.H351Suspected of causing cancer.H361Suspected of damaging fertility or the unborn child.H372Causes damage to organs through prolonged or repeated exposure.H400Very toxic to aquatic life.H401Toxic to aquatic lifeH411Toxic to aquatic life with long lasting effects.
NFPA health hazard :2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard :3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity :2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)12/12Hazard RatingHealth :2 Moderate Hazard - Temporary or minor injury may occurFlammability :3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical :1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
:HPersonal protection H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.