23BD5430-5_SDS.pdf

SDS
SAFETY DATA SHEET

SDS Number:
Page 1 of 7
BD5402, BD5405, BD5410, BD54110, BD5420,
BD54125, BD5430 FLEX, LV, MV, HV, NS, BK Part B
Hardener
Revision No.: 4
Revision Date:03/20/2020
3
Section 1 IDENTIFICATION
Product Name: BD5402, BD5405, BD5410, BD54110, BD5420, BD54125, BD5430
FLEX, LV, MV, HV, NS, BK Part B Hardener

Manufacturer: Big Dog Adhesives, LLC
615 S 4
th
Street
Elkhart, INDIANA, USA 46516-2717
Phone: 1-833-244-3644 (1-833-BIG-DOGG) Fax: 1-833-244-3649 (1-833-BIG-DOGZ)
Email: sales@bigdogadhesives.com Website: www.bigdogadhesives.com

Trade Name: BD5402, BD5405, BD5410, BD54110, BD5420, BD54125, BD5430
FLEX, LV, MV, HV, NS, BK Part B Hardener

Materials Uses: Epoxy Hardener used with an Epoxy Resin to Bond Various Substrates.
In Case of Emergency Contact CHEMTREC: 800-424-9300; USA 703-527-3887

Section 2 HAZARD IDENTIFICATION
GHS Classification:
CATEGORY
SIGNAL
WORD
HAZARD STATEMENT(S)
Health
Acute Oral Toxicity, Category 4
Acute Dermal Toxicity, Category 4
Acute Inhalation Toxicity, Category 4
Skin Irritation, Category 2
Eye Irritation, Category 2A
STOT SE, Category 3

WARNING
WARNING
WARNING
WARNING
WARNING
WARNING

H302 Harmful if swallowed
H312 Harmful in contact with skin
H332 Harmful if inhaled
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation

GHS Precaution Statements:
Prevention:
P261 Avoid breathing dust/fume/mist/vapors/spray.
P264 Wash hands (or other affected skin surfaces) thoroughly after handling.
P270 Do not eat, drink, or smoke when using this product.
P273 Avoid release to the environment
P280 Wear protective gloves/protective clothing/eye protection/face protection.
Response:

SDS
SAFETY DATA SHEET

SDS Number:
Page 2 of 7
BD5402, BD5405, BD5410, BD54110, BD5420,
BD54125, BD5430 FLEX, LV, MV, HV, NS, BK Part B
Hardener
Revision No.: 4
Revision Date:03/20/2020
3
P305/P351/P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P301/P312 IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell.
P302/P352 IF ON SKIN: Wash with plenty of soap and water.
P333/P313 If skin irritation or rash occurs get medical advice/attention.
Storage:
P403 Store in a well-ventilated place .
P410 Protect from sunlight.
P411 Store at temperatures not exceeding 25
O
C (75
O
F).
Disposal:
P501 Dispose of contents/containers in accordance with local/regional/national/international regulations.
Route of Entry: Eye contact, skin contact, inhalation, and ingestion.
Target Organs: Skin, eyes, respiratory tract, digestive tract, liver, kidney, olfactory and Central Nervous System
(CNS).
Skin Contact: May cause irritation of the skin. Prolonged exposure may cause sensitization. Preexisting skin
conditions may be aggravated by exposure to this material.
Eye Contact: May cause irritation and/or sensitization.
Respiratory Contact: Respiratory tract irritant. Prolonged exposure may result in dizziness, nausea, headache,
and anesthetic effects. May cause sensitization. Preexisting respiratory conditions may be aggravated by
exposure to this product. May cause CNS depression.
Ingestion: Call a physician or poison control center immediately. If swallowed, rinse mouth with water (only if
the person is conscious). Do not induce vomiting. If vomiting occurs, the head should be kept low so that the
stomach vomit doesn t enter the lungs.

Part B Hardener:
HMIS (United States) NFPA (United States) WHMIS (Canada): B2, C, D2B
Health 2

Flammability 1

Reactivity 0

PPE X

Section 3 COMPOSITION / INFORMATION ON INGREDIENTS
Name: Mixtures, Adhesives CAS # % by Weight
Fatty acids, C18-unsaturated, dimers, reaction 68410-23-1 > 80%
Products with polyethylenepolyamines
Triethylenetetramine < 3 % Section 4 FIRST-AID MEASURES Skin: Remove contaminated clothing. Flush skin with water, then wash affected areas with soap and water. If irritation develops, seek medical attention. Wash or dispose of clothing before reuse. SDS SAFETY DATA SHEET SDS Number: Page 3 of 7 BD5402, BD5405, BD5410, BD54110, BD5420, BD54125, BD5430 FLEX, LV, MV, HV, NS, BK Part B Hardener Revision No.: 4 Revision Date:03/20/2020 3 Eye: Flush eyes with water for 15 minutes. Remove contact lenses prior to water flush if possible. Seek immediate medical attention. Respiratory: Loosen clothing as necessary and position individual in a comfortable position. Move exposed to fresh air. Give artificial respiration if necessary. If breathing is difficult give oxygen. Immediately get medical assistance. Ingestion: Give patient water to dilute material in stomach. DO NOT induce vomiting. Seek immediate medical attention. If vomiting occurs naturally, have person lean forward to reduce risk of aspiration. DO NOT give anything by mouth to an unconscious person. Section 5 FIRE-FIGHTING MEASURES Suitable Extinguishing Media: In case of fire, water spray, fog, dry chemical or CO2, or alcohol resistant foam. Specific Hazards Arising from the Chemical: Fire may produce irritating, corrosive and/or toxic gases. Special Protective Equipment and Precautions for Firefighters: Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, and rubber boots. In enclosed spaces, use self-contained breathing apparatus (SCBA) and protective clothing. Flammability Classification: Combustible, Class IIIB estimated. Risk of Explosion due to Mechanical Impact: Not Applicable. Risk of Explosion due to Static Discharge: Not Applicable. Autoignition Temp.: 816 o F (436 o C). LEL: Not Available UEL: Not Available Section 6 ACCIDENTAL RELEASE MEASURES Personal Precautions, Protective Equipment, and Emergency Procedures: Keep unnecessary personnel away. Avoid contact with skin or inhalation of spillage, dust or vapor. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering them. Eliminate all sources of ignition. For large spill or leak wear self-contained breathing apparatus (SCBA) and appropriate PPE. Environmental Precautions: Prevent further leakage or spillage if safe to do so. Do not contaminate water. Avoid releases to the environment. Retain and dispose of contaminated was water. Keep out of sewers and drains. Contact local authorities if case of spillage to drain/aquatic environment. Clean-Up Methods and Materials: Absorb with an inert material and place in an appropriate container for disposal. Section 7 HANDLING AND STORAGE Handling Precautions: Avoid breathing vapors. Use in a well-ventilated area. Wear rubber gloves (nitrile or butyl) and chemical resistant apron. Wear chemical splash goggles. Do not reuse empty containers. Storage Precautions: Keep container closed. Handle containers with care. Open slowly in order to control possible pressure release. Store in a cool, well ventilated area. Section 8 EXPOSURE CONTROLS / PERSONAL PROTECTION Control Parameters and Exposures: Material Name: Exposure Limits: Fatty acids, C18-unsaturated, dimers, reaction SDS SAFETY DATA SHEET SDS Number: Page 4 of 7 BD5402, BD5405, BD5410, BD54110, BD5420, BD54125, BD5430 FLEX, LV, MV, HV, NS, BK Part B Hardener Revision No.: 4 Revision Date:03/20/2020 3 Products with polyethylenepolyamines (CAS No: 68410-23-1) None Triethylenetetramine AIHA WEEL (1999-01-01) TWA TLV and PEL 1 PPM Engineering Controls: Provide adequate ventilation (general or local exhaust). Ensure that a working eyewash and safety shower are in the work area. Individual Protection Measures and PPE: Eye / Face Protection: Wear safety glasses with side shields or splash goggles. Skin Protection: Chemical resistant gloves (nitrile or butyl) and chemical resistant apron are recommended. Respiratory Protection In case of insufficient ventilation, wear an approved (NIOSH) respirator with organic vapor cartridge and dust/mist pre-filter. Thermal Hazards: None. Section 9 PHYSICAL AND CHEMICAL PROPERTIES Part B Hardener Appearance: Viscous Liquid Odor: Faint Amine Odor Odor Threshold: Not Available pH: Not Available Melting Point / Freezing Point: Not Available Initial Boiling Point: Not Available Flash Point and Method: Open Cup: Greater than > 110
o
C (>230
o
F) (ASTM D 4206)
Flammability: Combustible, Class IIIB
Lower Explosion Limit: Not Available
Upper Explosion Limit: Not Available
Vapor Pressure: .09 mm Hg @ 68
o
F (20
o
C)
Vapor Density: 1 (Air = 1)
Relative Density: 7.7 9.8 lbs./gallon
Solubility in Water: Slightly
Partition Coefficient (n-Octanol in Water): Not Applicable
Auto-Ignition Temperature: 816
o
F (436
o
C)
Decomposition Temperature: Not Available
Viscosity (Dynamic CPS/mPa-s): Various
Percent Volatile: Not Available
Specific Gravity: 0.95 1.2

SDS
SAFETY DATA SHEET

SDS Number:
Page 5 of 7
BD5402, BD5405, BD5410, BD54110, BD5420,
BD54125, BD5430 FLEX, LV, MV, HV, NS, BK Part B
Hardener
Revision No.: 4
Revision Date:03/20/2020
3
Hazardous Decomposition Products: Under normal conditions of storage and use, hazardous decomposition
products should not be produced.
Other hazards: Heating this substance above 300
o
F in the presence of air may cause slow oxidative
decomposition; above 500
o
F polymerization may occur.

Section 11 TOXICOLOGICAL INFORMATION
Acute Toxicity to Animals:
Fatty acids, C18-unsaturated, dimers, reaction
Products with polyethylenepolyamines (CAS No: 68410-23-1) LD50 = > 5,000 mg/kg (oral, rat)

Triethylenetetramine LD50 = 2,500 mg/kg (oral, rat)

Eye Damage / Irritation: Causes serious eye damage.
Respiratory Sensitization: Harmful if inhaled.
Skin Sensitization: Harmful in contact with skin.
Ingestion: Harmful if swallowed.
Mutagenicity: Not Available.
Carcinogenicity: Not Available.
Reproductive Toxicity: Not Available.
Teratogenic Effects: Not Available.
STOST- Single Exposure: Not Available.
STOST Repeated Exposure: Not Available.
Aspiration Hazard: Not Available

Section 12 ECOLOGICAL INFORMATION
Ecotoxicity: This product contains components that may be toxic to aquatic organisms and may cause long term
adverse effects in an aquatic environment.
Product/ingredient name Result Species Exposure
Triethylenetetramine Acute LC50 33,900 g/l Fresh water Aquatic invertebrates, Water flea 48 hour
Acute EC50 3,700 g/l Fresh water Aquatic plants Green algae 96 hour

Persistence and Degradability: Benzyl Alcohol (CAS 100-51-6) – Biodegradability Biotic/Aerobic Result 92 to
96% – Readily Biodegradable.
Bioaccumulative Potential: This product contains components with the potential to bio-accumulate.

SDS
SAFETY DATA SHEET

SDS Number:
Page 6 of 7
BD5402, BD5405, BD5410, BD54110, BD5420,
BD54125, BD5430 FLEX, LV, MV, HV, NS, BK Part B
Hardener
Revision No.: 4
Revision Date:03/20/2020
3
Product/ingredient name LogPow BCF Potential
Triethylenetetramine -1.66 to -1.4 Low
Fatty acids, C18-unsaturated,
dimers, reaction products with
polyethylenepolyamines
(CAS 68410-23-1)
492.00 Low

Mobility in Soil: Not Available.
Other Adverse Effects: Not Available.

Section 13 DISPOSAL CONSIDERATIONS
Disposal Methods:
Part B Hardener: The generation of waste should be avoided or minimized wherever possible. Disposal of this
product, solutions and any by-products should at all times comply with the requirements of environmental
protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and
non-recycle-able products via a licensed waste disposal contractor. Waste should not be disposed of untreated
to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging
should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This
material and its container must be disposed of in a safe way. Care should be taken when handling emptied
containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and
contact with soil, waterways, drains and sewers.

Section 14 TRANSPORT INFORMATION

CFR: Not Regulated
TDG: Not Regulated
DOT Classification: Not Regulated
IATA:
IMO:
Marine Pollutant: No

Section 15 REGULATORY INFORMATION
U.S. Federal Regulations
United States TSCA 12(b) Chemical export notification: None required.
United States TSCA 5(a)2 Final significant new use rules: Not listed.
United States TSCA 5(a)2 Proposed significant new use rules: Not listed.
United States TSCA 5(e) Substances consent order: Not listed.
SARA 311/312 Chemical: Yes
Classification Hazard Categories: Immediate (acute) health hazard
Acute Toxicity (any route of exposure)
Serious eye damage or eye irritation
SARA 313 (TRI reporting) Not regulated.
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPS) List: Not regulated.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130): Not regulated.
Safe Drinking Water Act (SDWA): Not regulated.

State Regulations

SDS
SAFETY DATA SHEET

SDS Number:
Page 7 of 7
BD5402, BD5405, BD5410, BD54110, BD5420,
BD54125, BD5430 FLEX, LV, MV, HV, NS, BK Part B
Hardener
Revision No.: 4
Revision Date:03/20/2020
3
California Proposition 65: None required.

TSCA (Toxic Substances Control Act): All components of this product are on the TSCA Inventory or are
exempt from TSCA Inventory Requirements.

International Regulations:
DSL (Canada Domestic Substance List): All components of this product are on the DSL (Canada Domestic
Substance List) or are exempt from DSL.
EINECS: Not Available.
WHMIS: B2, C, D2B.

Section 16 OTHER INFORMATION
Changes to This Revision: March 20, 2020
Prepared By: Louis J. Giovannini
Telephone: USA 520-271-7313
Internet: sales@bigdogadhesives.com
Notice to Reader
To the best of our knowledge, the information contained herein is accurate. However, neither the
above-named manufacturer nor any of its subsidiaries assumes any liability whatsoever for accuracy or
completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may
present unknown hazards and should be used with caution. Although certain hazards are described
herein, we cannot guarantee that these are the only hazards that exist.
END OF SDS DOCUMENT

SDS
SAFETY DATA SHEET

SDS Number:
Page 1 of 7
BD5402, BD5405, BD5410, BD54110, BD5420,
BD54125, BD5430, FLEX, LV, MV, HV, NS, BK Part A
RESIN
Revision No.: 4
Revision Date:03/20/2020
3
Section 1 IDENTIFICATION
Product Name: BD5402, BD5405, BD5410, BD54110, BD5420, BD54125, BD5430,
FLEX, LV, MV, HV, NS, BK Part A RESIN

Trade Name: BD5402, BD5405, BD5410, BD54110, BD520, BD54125, BD5430
FLEX, LV, MV, HV, NS, BK Part A RESIN

Materials Uses: Epoxy RESIN used with an Epoxy Hardener (Part B) to Bond Various Substrates.
In Case of Emergency Contact CHEMTREC: 800-424-9300; USA 703-527-3887

Section 2 HAZARD IDENTIFICATION
GHS Classification:
CATEGORY
SIGNAL
WORD
HAZARD STATEMENT(S)
Health
Skin Corrosion/Irritation, Category 2
Eye Irritation, Category 2A
Skin Sensitization, Category 1
STOT SE, Category 3

WARNING
WARNING
WARNING
WARNING

H315 Causes skin irritation
H319 Causes serious eye irritation
H317 May cause an allergic skin reaction
H335 May cause respiratory irritation

SDS
SAFETY DATA SHEET

SDS Number:
Page 2 of 7
BD5402, BD5405, BD5410, BD54110, BD5420,
BD54125, BD5430, FLEX, LV, MV, HV, NS, BK Part A
RESIN
Revision No.: 4
Revision Date:03/20/2020
3
P301/P312 IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell.
P302/P352 IF ON SKIN: Wash with plenty of soap and water.
P333/P313 If skin irritation or rash occurs get medical advice/attention.
Storage:
P403 Store in a well-ventilated place .
P410 Protect from sunlight.
P411 Store at temperatures not exceeding 25
O
C (75
O
F).
Disposal:
P501 Dispose of contents/containers in accordance with local/regional/national/international regulations.
Route of Entry: Eye contact, skin contact, inhalation, and ingestion.
Target Organs: Skin, eyes, respiratory tract, digestive tract, liver, kidney, olfactory and Central Nervous System
(CNS).
Skin Contact: May cause irritation of the skin. Prolonged exposure may cause sensitization. Preexisting skin
conditions may be aggravated by exposure to this material.
Eye Contact: May cause irritation and/or sensitization.
Respiratory Contact: Respiratory tract irritant. Prolonged exposure may result in dizziness, nausea, headache,
and anesthetic effects. May cause sensitization. Preexisting respiratory conditions may be aggravated by
exposure to this product. May cause CNS depression.
Ingestion: Call a physician or poison control center immediately. If swallowed, rinse mouth with water (only if
the person is conscious). Do not induce vomiting. If vomiting occurs, the head should be kept low so that the
stomach vomit doesn t enter the lungs.

Part A RESIN:
HMIS (United States) NFPA (United States) WHMIS (Canada): B2, C, D2B
Health 2

Flammability 1

Reactivity 0

PPE X

Section 3 COMPOSITION / INFORMATION ON INGREDIENTS
Name: Mixtures, Adhesives CAS # % by Weight
Bisphenol A Epoxy Resin 25068-38-6 80 100%
Non-hazardous Ingredients Not Applicable < 10% Section 4 FIRST-AID MEASURES Skin: Remove contaminated clothing. Flush skin with water, then wash affected areas with soap and water. If irritation develops, seek medical attention. Wash or dispose of clothing before reuse. Eye: Flush eyes with water for 15 minutes. Remove contact lenses prior to water flush if possible. Seek immediate medical attention. SDS SAFETY DATA SHEET SDS Number: Page 3 of 7 BD5402, BD5405, BD5410, BD54110, BD5420, BD54125, BD5430, FLEX, LV, MV, HV, NS, BK Part A RESIN Revision No.: 4 Revision Date:03/20/2020 3 Respiratory: Loosen clothing as necessary and position individual in a comfortable position. Move exposed to fresh air. Give artificial respiration if necessary. If breathing is difficult give oxygen. Immediately get medical assistance. Ingestion: Give patient water to dilute material in stomach. DO NOT induce vomiting. Seek immediate medical attention. If vomiting occurs naturally, have person lean forward to reduce risk of aspiration. DO NOT give anything by mouth to an unconscious person. Section 5 FIRE-FIGHTING MEASURES Suitable Extinguishing Media: In case of fire, water spray, fog, dry chemical or CO2, or alcohol resistant foam. Specific Hazards Arising from the Chemical: Fire may produce irritating, corrosive and/or toxic gases. Hazardous Thermal: Decomposition products may include the following materials: Carbon dioxide, carbon monoxide, halogenated compounds. Special Protective Equipment and Precautions for Firefighters: Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, and rubber boots. In enclosed spaces, use self-contained breathing apparatus (SCBA) and protective clothing. Flammability Classification: Combustible, Class IIIB estimated. Risk of Explosion due to Mechanical Impact: Not Applicable. Risk of Explosion due to Static Discharge: Not Applicable. Autoignition Temp.: Not Available LEL: Not Available UEL: Not Available Section 6 ACCIDENTAL RELEASE MEASURES Personal Precautions, Protective Equipment, and Emergency Procedures: Keep unnecessary personnel away. Avoid contact with skin or inhalation of spillage, dust or vapor. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering them. Eliminate all sources of ignition. For large spill or leak wear self-contained breathing apparatus (SCBA) and appropriate PPE. Environmental Precautions: Prevent further leakage or spillage if safe to do so. Do not contaminate water. Avoid releases to the environment. Retain and dispose of contaminated was water. Keep out of sewers and drains. Contact local authorities if case of spillage to drain/aquatic environment. Clean-Up Methods and Materials: Absorb with an inert material and place in an appropriate container for disposal. Section 7 HANDLING AND STORAGE Handling Precautions: Avoid breathing vapors. Use in a well-ventilated area. Wear rubber gloves (nitrile or butyl) and chemical resistant apron. Wear chemical splash goggles. Do not reuse empty containers. Storage Precautions: Keep container closed. Handle containers with care. Open slowly in order to control possible pressure release. Store in a cool, well ventilated area. Section 8 EXPOSURE CONTROLS / PERSONAL PROTECTION Control Parameters and Exposures: Material Name: Exposure Limits: Bisphenol A Epoxy Resin (CAS: 25068-38-6) None SDS SAFETY DATA SHEET SDS Number: Page 4 of 7 BD5402, BD5405, BD5410, BD54110, BD5420, BD54125, BD5430, FLEX, LV, MV, HV, NS, BK Part A RESIN Revision No.: 4 Revision Date:03/20/2020 3 Engineering Controls: Provide adequate ventilation (general or local exhaust). Ensure that a working eyewash and safety shower are in the work area. Individual Protection Measures and PPE: Eye / Face Protection: Wear safety glasses with side shields or splash goggles. Skin Protection: Chemical resistant gloves (nitrile or butyl) and chemical resistant apron are recommended. Respiratory Protection In case of insufficient ventilation, wear an approved (NIOSH) respirator with organic vapor cartridge and dust/mist pre-filter. Thermal Hazards: None. Section 9 PHYSICAL AND CHEMICAL PROPERTIES Part A RESIN Appearance: Viscous Liquid Color: Clear Odor: Not Available Odor Threshold: Not Available pH: Not Available Melting Point / Freezing Point: Not Available Initial Boiling Point: 260 o C (500 o F) Flash Point and Method: Pensky-Martens Closed Cup: 251 o C (>484
o
F) (ASTM D 93)
Flammability: Not Available
Lower Explosion Limit: Not Available
Upper Explosion Limit: Not Available
Vapor Pressure: .03 mm Hg @ 77
o
C (171
o
F)
Vapor Density: Not Available
Relative Density: 1.17 (9.7 lbs./gallon)
Solubility in Water: Negligible
Partition Coefficient (n-Octanol in Water): Not Available
Auto-Ignition Temperature: Not Available
Decomposition Temperature: Not Available
Viscosity (Dynamic CPS/mPa-s): 8,000 to 10,000 CPS
Percent Volatile: Not Available
Specific Gravity: 1.17

Section 10 STABILITY AND REACTIVITY
Reactivity: Product is stable under normal conditions.
Chemical Stability: The product is stable.
Possibility of Hazardous Reactions: Under normal conditions of storage and use, hazardous reactions will not
occur.
Conditions to Avoid: Avoid exposure obtain special instructions before use. Avoid all possible sources of
ignition (spark or flame).
Materials to Avoid (Incompatibility): strong oxidizing materials, strong acids, strong alkalis.
Hazardous Decomposition Products: Under normal conditions of storage and use, hazardous decomposition
products should not be produced.
Other hazards: Reacts with considerable heat release with some curing agents.

SDS
SAFETY DATA SHEET

SDS Number:
Page 5 of 7
BD5402, BD5405, BD5410, BD54110, BD5420,
BD54125, BD5430, FLEX, LV, MV, HV, NS, BK Part A
RESIN
Revision No.: 4
Revision Date:03/20/2020
3

Section 11 TOXICOLOGICAL INFORMATION
Acute Toxicity to Animals:

Bisphenol A Epoxy Resin (CAS: 25068-38-6) LD50 = 11,400 mg/kg (oral, rat)
LD50 = 2,000 mg/kg (dermal, rat)
Conclusion/Summary: Not Available

Acute Toxicity to Humans: This product has not been tested for human effects. No additional information.
Chronic Toxicity to Animals: This product has not been tested for animal effects. No additional information.
Chronic Toxicity to Humans: This product has not been tested for human effects. No additional information.
Irritation/Corrosion:
Product/ingredient name Result Species Score Exposure Observation
Bisphenol A Epoxy Resin
(CAS: 25068-38-6)
Skin Erythema/Eschar 404 Acute
Dermal Irritation/Corrosion
Rabbit 1.5 2
Skin Edema 404 Acute
Dermal Irritation/Corrosion
Rabbit 1.0 1.5
Eyes 405 Acute Eye
Irritation/Corrosion
Rabbit 0
Eyes Redness of the Conjunctivae Rabbit 0.7
Skin Moderate Irritation Rabbit 24 hours
Skin Severe Irritant Rabbit 24 hours
Eyes Mild Irritant Rabbit

Eye Damage / Irritation: Not Available.
Respiratory Sensitization: Not Available.
Skin Sensitization: Not Available.
Ingestion: Not Available.
Mutagenicity: Not Available.
Carcinogenicity: Not Available.
Reproductive Toxicity: Not Available.
Teratogenic Effects: Not Available.
STOST- Single Exposure:
Product/ingredient name Category Route of Exposure Target Organ
Bisphenol A Epoxy Resin (CAS 26068-38-6) Category 3

STOST Repeated Exposure: Not Available.
Aspiration Hazard: Not Available

Section 12 ECOLOGICAL INFORMATION
Ecotoxicity: This product contains components that may be toxic to aquatic organisms and may cause long term
adverse effects in an aquatic environment.
Product/ingredient name Result Species Exposure
Bisphenol A Epoxy Resin
(CAS 25068-38-6)
Acute LC50 1.3 mg/l – 203 Fish,
Acute Toxicity Test
Fish – Fish 96 hour
Acute EC50 2.1 mg/l – 202 Daphnia sp.
Acute Immobilization Test and Reproductive
Test
Aquatic invertebrates. Water Flea 48 hour

SDS
SAFETY DATA SHEET

SDS Number:
Page 6 of 7
BD5402, BD5405, BD5410, BD54110, BD5420,
BD54125, BD5430, FLEX, LV, MV, HV, NS, BK Part A
RESIN
Revision No.: 4
Revision Date:03/20/2020
3
Acute No-observable-effect-concentration
0.3 mg/l 211 Daphnia Magna
Reproduction Test
Aquatic invertebrates. Water Flea 21 day
Acute LC50 > 11 mg/l Aquatic plants – Algae 72 hour

Persistence and Degradability: Not Available.

Bioaccumulative Potential:

Product/ingredient name LogPow BCF Potential
Bisphenol A Epoxy Resin
(CAS 26068-38-6)
2.64 3.78 3 31 31.00 Low

Mobility in Soil: Not Available.
Other Adverse Effects: No known significant effects or critical hazards.

Section 13 DISPOSAL CONSIDERATIONS
Disposal Methods:
Part A RESIN: The generation of waste should be avoided or minimized wherever possible. Disposal of this
product, solutions and any by-products should at all times comply with the requirements of environmental
protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and
non-recycle-able products via a licensed waste disposal contractor. Waste should not be disposed of untreated
to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging
should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This
material and its container must be disposed of in a safe way. Care should be taken when handling emptied
containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and
contact with soil, waterways, drains and sewers.

Section 14 TRANSPORT INFORMATION

CFR: Not Regulated
TDG: Not Regulated
DOT Classification: Not Regulated
IATA:
IMO:
Marine Pollutant: YES

SDS
SAFETY DATA SHEET

SDS Number:
Page 7 of 7
BD5402, BD5405, BD5410, BD54110, BD5420,
BD54125, BD5430, FLEX, LV, MV, HV, NS, BK Part A
RESIN
Revision No.: 4
Revision Date:03/20/2020
3
SARA 313 (TRI reporting) Not regulated.
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPS) List: Not regulated.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130): Not regulated.
Safe Drinking Water Act (SDWA): Not regulated.

State Regulations
California Proposition 65: WARNING: This product contains less than 0.1% of a chemical known to the
State of California to cause cancer. WARNING: This product contains less than
1% of a chemical known to the State of California to cause birth defects or other
reproductive harm.
Ingredient Name Cancer Reproductive No significant risk level Maximum acceptable dosage
level
Oxirane, 2-(phenoxymethyl)- Yes No 5 g/day No
Phenol, 4,4 -(1-methylethylidene)bis- No Yes No No

TSCA (Toxic Substances Control Act): All components of this product are on the TSCA Inventory or are
exempt from TSCA Inventory Requirements.

Our Mission