SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Product name: CAB-O-SIL TS-720 Fumed Silica
Product code: TS720
Synonyms: Silicon Dioxide, Synthetic Amorphous Silica, Pyrogenic (Fumed) Amorphous Silica
This SDS is valid for
the following grades:
TS720, TS720D.
Recommended use: Various, Rheological control, Flow agent, Thickening agent, Glossing or matting agent,
Reinforcing agent in: Coatings, Adhesives and/or sealants, Inks, Silicone Elastomer,
Rubber products, Dispersion, Suspension, Cosmetics, Paints, Hygiene and sanitary
products, Other
Restrictions on use: Not Applicable
Supplier:
Emergency Telephone Number: 24H/7d service
Canada: CANUTEC 1-613-996-6666
GERMANY: CHEMTREC 0800-181-7059
US: CHEMTREC: 1-800-424-9300 or 1-703-527-3887
UK: CHEMTREC: (+44)-870-8200418
International CHEMTREC: +1 703-741-5970 or +1-703-527-3887
2. HAZARDS IDENTIFICATION
Classification
OSHA Regulatory Status: This chemical is considered hazardous by the United States 2012 OSHA Hazard
Communication Standard (29 CFR 1910.1200).
Label Elements:
United States Hazard Communication Standard 29 CFR 1910.1200 (2012)
Canada Hazardous Products Regulations (SOR/2015-17)
Revision date:28-Nov-2019
Cabot Corporation
4400 North Point Parkway
Suite 200
Alpharetta, Georgia 30022
United States
Tel: +1 678 297 1300
Cabot Corporation
157 Concord Road
Billerica, MA 01821
UNITED STATES
Tel: 1-978-663-3455
Fax: 1-978-670-6955
Combustible dust
___________________________________________________________________________________________
Page 1 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
Pictogram: None
Signal Word: WARNING
Hazard statements: May form combustible dust concentrations in air
Precautionary Statements –
Prevention
Keep away from all ignition sources including heat, sparks and flame
Prevent dust accumulations to minimize explosion hazard
Hazards not otherwise classified (HNOC)
Do not expose to temperatures above 150 C. Hazardous products of combustion can include carbon monoxide, carbon
dioxide and formaldehyde.
Potential health effects
Principle Routes of Exposure:Inhalation, Skin Contact, Eye contact
Eye Contact: May cause mechanical irritation. Avoid contact with eyes.
Skin Contact: May cause mechanical irritation and skin drying. Avoid contact with skin. No cases of
sensitization in humans have been reported.
Inhalation: Dust may be irritating to respiratory tract. Provide appropriate exhaust ventilation at
machinery and at places where dust can be generated. See also Section 8.
Ingestion: Adverse health effects are not expected. See Section 11.
Carcinogenicity: Does not contain any substances greater than 0.1% listed by IARC (International Agency
for Research on Cancer), NTP (National Toxicology Program), OSHA (Occupational Safety
and Health Administration), ACGIH (American Conference for Governmental Industrial
Hygienists) or EU (European Union). See also Section 11.
Target Organ Effects: Lungs, See Section 11
Medical Conditions Aggravated by
Exposure:
Asthma, Respiratory disorder
Potential Environmental Effects:None known. See Section 12.
___________________________________________________________________________________________
Page 2 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
3. COMPOSITION/INFORMATION ON INGREDIENTS
Synonyms: Silicon Dioxide, Synthetic Amorphous Silica, Pyrogenic (Fumed) Amorphous Silica.
Chemical name CAS No weight-% Trade secret
Siloxanes and Silicones, di-Me, reaction products
with silica
67762-90-7 100 –
Other Information:
The hyphen (-) means “not applicable”
4. FIRST AID MEASURES
FIRST AID MEASURES
Skin Contact Wash thoroughly with soap and water. Seek medical attention if symptoms develop.
Eye contact Flush eyes immediately with large amounts of water for 15 minutes. Seek medical
attention if symptoms develop.
Inhalation If cough, shortness of breath or other breathing problems occur, move to fresh air. Seek
medical attention if symptoms persist. If necessary, restore normal breathing through
standard first aid measures.
Ingestion Do not induce vomiting. If conscious, give several glasses of water. Never give anything
by mouth to an unconscious person.
Most important symptoms and effects, both acute and delayed
Symptoms: The most important known symptoms and effects are described in Section 2 and/or in
Section 11.
Indication of any immediate medical attention and special treatment needed
Note to physicians: Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment. Use foam, carbon dioxide (CO2), dry chemical or water spray.
A fog is recommended if water is used.
Unsuitable Extinguishing Media:DO NOT USE high pressure media which could cause formation of a potentially explosible
dust-air mixture.
Specific hazards arising from the
chemical:
May release formaldehyde when heated to high temperatures in the presence of air.
Formaldehyde is a known skin and lung sensitizer and is regulated as a carcinogen.
Hazardous combustion products:Carbon monoxide (CO). Carbon dioxide (CO2). Formaldehyde.
Protective equipment and
precautions for firefighters:
Wear suitable protective equipment. In the event of fire, wear self-contained breathing
apparatus.
Risk of Dust Explosion: Dust may form explosive mixture in air. See also Section 9.
___________________________________________________________________________________________
Page 3 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions: Avoid dust formation. Remove all sources of ignition. Ensure adequate ventilation. Use
personal protective equipment. See also Section 8.
For emergency responders: Use personal protection recommended in Section 8.
Environmental Precautions:
Environmental Precautions: Contain spilled product on land, if possible. Local authorities should be advised if
significant spillages cannot be contained.
Methods and material for containment and cleaning up
Methods for containment: Prevent further leakage or spillage if safe to do so.
Methods for cleaning up: If the spilled material contains dust or has the potential to create dust, use
explosion-proof vacuums and/or cleaning systems suitable for combustible dusts. Use of
a vacuum with high efficiency particulate air (HEPA) filtration is recommended. Do not
create a dust cloud by using a brush or compressed air. Dry sweeping is not
recommended. Pick up and transfer to properly labelled containers. See Section 13.
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling: Avoid contact with skin and eyes. Avoid dust formation. Do not breathe dust. Provide
appropriate exhaust ventilation at machinery and at places where dust can be generated.
Do not create a dust cloud by using a brush or compressed air. Dust may form explosible
mixture in air.
Take precautionary measures against static discharges. All metal parts of the mixing and
processing equipment must be earthed/grounded. Ensure all equipment is electrically
earthed/grounded before beginning transfer operations. Fine dust is capable of
penetrating electrical equipment and may cause electrical shorts.
Conditions for safe storage, including any incompatibilities
Storage Conditions: Keep containers tightly closed in a dry and well-ventilated place. Do not store together
with volatile chemicals as they may be adsorbed onto product. Store at ambient
conditions. Keep away from heat and sources of ignition. Keep in properly labeled
containers.
Dust deposits should not be allowed to accumulate on surfaces, as these may form an
explosible mixture if they are released in the atmosphere in sufficient concentrations.
Incompatible materials: None known.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure guidelines: There are no exposure limits identified for this product. Exposure limits for components
are stated below.
___________________________________________________________________________________________
Page 4 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
Amorphous Silica, The regulatory
exposure limits are found under the
general silica, CAS RN 7631-86-9:
Australia: 2 mg/m , TWA, Respirable
Austria MAK 4 mg/m , TWA, Inhalable fraction
Finland: 5 mg/m
Germany TRGS 900: 4 mg/m , TWA, Inhalable fraction
India: 10 mg/m , TWA
Ireland: 2.4 mg/m , TWA, Respirable dust
Norway: 1.5 mg/m , TWA, Respirable dust
Switzerland: 4 mg/m , TWA
UK WEL: 6 mg/m , TWA, Inhalable fraction
2.4 mg/m , TWA, Respirable fraction
US OSHA PEL: 6mg/m (54 FR2701)
Dust, or Particulates Not Otherwise
Specified:
Belgium: 10 mg/m , TWA, Inhalable
3 mg/m TWA, Respirable
China: 8 mg/m , TWA
10 mg/m , STEL
France: 10 mg/m , TWA Inhalable dust
5 mg/m , TWA Respirable dust
Italy: 10 mg/m , TWA, Inhalable
3 mg/m , TWA, Respirable
Malaysia: 10 mg/m , TWA, Inhalable
3 mg/m , TWA, Respirable
Spain: 10 mg/m , VLA, Inhalable
3 mg/m , VLA, Respirable
US ACGIH – PNOS: 10 mg/m , TWA, Inhalable
3 mg/m , TWA, Respirable
US OSHA – PEL: 15 mg/m , TWA, Total dust
5 mg/m , TWA, Respirable
NOTE:
In its facilities globally, Cabot Corporation manages silica to the Germany TRGS 900 occupational exposure limit of 4 mg/m ,
TWA, Inhalable fraction
MAK: Maximale Arbeitsplatzkonzentration (Maximum Workplace Concentration)
PEL: Permissible Exposure Limit
PNOS: Particulate Not Otherwise Specified
STEL: Short Term Exposure Limit
TRGS: Technische Regeln f r Gefahrstoffe (Technical Rule for Hazardous Materials)
TWA: Time Weighted Average
US ACGIH: United States American Conference of Governmental Industrial Hygienists
US OSHA: United States Occupational Safety and Health Administration
VLA: Valore L mite Ambientales (Environmental Limit Value)
WEL: Workplace Exposure Limit
Engineering Controls: Ensure adequate ventilation to maintain exposures below occupational limits. Provide
appropriate local exhaust ventilation at machinery and at places where dust can be
___________________________________________________________________________________________
Page 5 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
generated.
Personal protective equipment [PPE]
Respiratory Protection: Approved respirator may be necessary if local exhaust ventilation is not adequate.
Hand Protection: Wear protective gloves to prevent skin drying. Use protective barrier cream before
handling the product. Wash hands and other exposed skin with mild soap and water.
Eye/face Protection: Wear eye/face protection. Wear safety glasses with side shields (or goggles).
Skin and Body Protection: Wear suitable protective clothing. Wash clothing daily. Work clothing should not be
allowed out of the workplace.
Other: Handle in accordance with good industrial hygiene and safety practice. Emergency
eyewash and safety shower should be located nearby.
Environmental exposure controls:In accordance with all local legislation and permit requirements as applicable for dusts.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid Odor: None under normal use. May
exhibit odor at high
temperature.
Appearance: Powder Odor threshold: 0.05 ppm
Color: White
Property Values Remarks Method
pH: No information available
Melting point/freezing point:1700 C NIOSH Pocket Guide to Chemical Hazards
Boiling point / boiling range:2230 C NIOSH Pocket Guide to Chemical Hazards
Evaporation Rate: Not Applicable
Vapor pressure: Not Applicable
Vapor Density: Not Applicable
Density: 2.2-2.3 g/cm3 @ 20 C
Bulk Density: No information available
Specific Gravity at 20 C: 2.2-2.3
Water solubility: Slightly soluble According to OECD 105
Solubility(ies): No information available
Partition Coefficient
(n-octanol/water):
Not Applicable
Decomposition temperature:> 400 C Bulk Powder test- Diffusion cell
Viscosity: Not Applicable
Kinematic viscosity: Not Applicable
Dynamic viscosity: Not Applicable
Oxidizing Properties: No oxidizing properties
Softening point: Not Applicable
VOC content (%): Not Applicable
% Volatile (by Volume): Not Applicable
% Volatile (by Weight): Not Applicable
Surface Tension: Not Applicable
___________________________________________________________________________________________
Page 6 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
End point is listed “not applicable” due to the inherent properties of the substance
“No information available” indicates testing has not been performed
10. STABILITY AND REACTIVITY
Reactivity: Not reactive.
Stability: Stable under recommended handling and storage conditions.
Stable up to >400 C. No exotherm (BulkPowder test – Diffusion cell).
Possibility of hazardous reactions:None under normal processing.
Hazardous polymerization: Hazardous polymerization does not occur.
Conditions to avoid: Do not expose to temperatures above 150 C. Keep away from heat and sources of
ignition. Avoid dust formation.
May release formaldehyde when heated to high temperatures in the presence of air.
Formaldehyde is a known skin and lung sensitizer and is regulated as a carcinogen.
Incompatible materials: None known.
Explosion data See also Section 9.
Sensitivity to Mechanical Impact:None.
Sensitivity to Static Discharge:Dust may form explosible mixture in air. Avoid dust formation. Do not create a dust cloud
by using a brush or compressed air. Take precautionary measures against static
discharges. All metal parts of the mixing and processing equipment must be
Explosive properties: Dust may form explosible mixture in air
Flash Point: Not Applicable
Flammability (solid, gas): No information available
Flammability Limit in Air: No information available
Explosion Limits in Air – Upper (g/m
3
): No information available
Explosion Limits in Air – Lower (g/m
3
): 300
temperature of 450 C (the upper limit of the apparatus) met
the criteria for ignition based on temperature rise. For this
reason, the MIT was reported as > 450 C.
Minimum Ignition Energy: >10 J ASTM E2019
Ignition Energy: No information available
Maximum Absolute Explosion Pressure:5.22 bar ASTM E-1226 (20-L Sphere Test)
Maximum Rate of Pressure Rise: 140 bar/secASTM E-1226 (20-L Sphere Test)
Burn Velocity: No information available
Kst Value: 38
bar.meter/second
ASTM E-1226 (20-L Sphere Test)
Dust Explosion Classification: ST1 Weak Explosion ASTM E-1226;
___________________________________________________________________________________________
Page 7 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
earthed/grounded. Ensure all equipment is electrically earthed/grounded before
beginning transfer operations.
Hazardous decomposition products:Carbon monoxide (CO). Carbon dioxide (CO2). Formaldehyde.
11. TOXICOLOGICAL INFORMATION
Information given is based on data obtained from this substance or from similar substances.
Acute toxicity
Oral LD50: LD50/oral/rat = > 5000 mg/kg. No deaths occurred and no signs of toxicity were seen
during the observation periods after single oral administration of the substance. (OECD
423).
Inhalation LC50: Due to the product’s physical characteristics, no suitable testing procedure is available
Dermal LD50: No data are available on the product itself.
Synthetic Amorphous Silica: LD50/dermal/rabbit = > 2000 mg/kg. Very slight transient
erythema in one animal. No signs of systemic or organ toxicity (OECD 402).
Skin corrosion/irritation: Primary irritation index = 0.0 @ 24 hr. Not classified as an irritant (OECD 404)
Serious eye damage/eye irritation:Not classified as an irritant in rabbit studies (OECD 405). High dust concentrations may
cause mechanical irritation.
Sensitization: No experimental animal data are available. No cases of sensitization in humans have been
reported. Contains no known sensitizers. May release formaldehyde when heated to high
temperatures in the presence of air. Formaldehyde is a known skin and lung sensitizer
and is regulated as a carcinogen.
Mutagenicity: Not mutagenic in Ames test. Negative in the chromosome aberration test in Chinese
hamster ovary (CHO) cells.
Carcinogenicity: No data are available on the product itself.
Synthetic Amorphous Silica: No evidence of carcinogenicity was observed in multiple
animal species following repeated oral or inhalation exposure to amorphous silica.
Similarly, epidemiology studies show no evidence of carcinogenicity in workers who
manufacture amorphous silica.
Treated Synthetic Amorphous Silica: No evidence of cancer in rats exposed for 24 months
at 100 mg/kg/d (diet). (ECETOC JACC Report 051 – Synthetic Amorphous Silica, September
2006).
Reproductive and Developmental
Toxicity:
No effects on reproductive organs have been reported in animal toxicity studies. No
developmental effects observed on progeny in dietary study (doses of 0 or 500 mg/kg/d).
(ECETOC JACC Report 051 – Synthetic Amorphous Silica, September 2006).
STOT – single exposure: Specific target organ toxicity is not expected after single oral, single inhalation, or single
dermal exposure.
STOT – repeated exposure: No data are available on the product itself.
Treated Synthetic Amorphous Silica: Repeated dose toxicity: oral (rat) , 5 to 8 weeks, no
___________________________________________________________________________________________
Page 8 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
significant treatment-related adverse effects at doses of up to 2000 mg/kg/d. (ECETOC
JACC Report 051 – Synthetic Amorphous Silica, September 2006).
Synthetic Amorphous Silica: Repeated dose toxicity: oral (rat), 2 weeks to 6 months, no
significant treatment-related adverse effects at doses of up to 8% silica in the diet.
Repeated dose toxicity: inhalation (rat), 13 weeks, Lowest Observed Effect Level (LOEL) =
1.3 mg/m
3
based on mild reversible effects in the lungs.
Repeated dose toxicity: inhalation (rat), 90 days, LOEL = 1 mg/m
3
based on reversible
effects in the lungs and effects in the nasal cavity.
Based on available data, a STOT-RE classification is not warranted.
Aspiration Hazard: Based on industrial experience and available data, no aspiration hazard is expected.
12. ECOLOGICAL INFORMATION
Information given is based on data obtained from this substance or from similar substances.
Aquatic Toxicity: Fish (Brachydanio rerio) LC50 (96 h): > 10,000 mg/l; (Method: OECD 203)
No acute toxicity to Daphnia with EL and EL50 ranging from >1000 to 10,000 mg/L (OECD
202)
ENVIRONMENTAL FATE
Persistence and degradabilityThe methods for determining biodegradability are not applicable to inorganic substances
Bioaccumulation Not expected due to physicochemical properties of the substance.
Mobility: Not expected to migrate.
Distribution to Environmental
Compartments:
No information available.
Other adverse effects: No information available.
13. DISPOSAL CONSIDERATIONS
Disclaimer: Information in this section pertains to the product as shipped in its intended composition as described in Section 3
of this SDS. Contamination or processing may change waste characteristics and requirements. Regulations may also apply to
empty containers, liners or rinsate. State/provincial and local regulations may be different from federal regulations. The person
generating waste must determine its proper classification
RCRA: Unused product is not a hazardous waste under U.S. RCRA, 40 CFR 261.
Unused and Uncontaminated
Product:
Product, as supplied, should be disposed of in accordance with the regulations issued by
the appropriate federal, state and local authorities. Same consideration should be given
to containers and packaging.
___________________________________________________________________________________________
Page 9 / 12
14. TRANSPORT INFORMATION
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
DOT
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
ICAO (air)
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
IATA
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
IMDG
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
RID
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
ADR
UN/ID no Not regulated
Proper Shipping Name Not regulated
Hazard Class Not regulated
Packing group Not regulated
15. REGULATORY INFORMATION
Hazard Classification
United States – OSHA (29 CFR 1910.1200): Hazardous
Canada – WHMIS Classification (HPR,
SOR/2015-17)
Hazardous. See Section 2 for Hazard Classification.
___________________________________________________________________________________________
Page 10 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
This product has been classified in accordance with the hazard criteria of the Hazardous Products Regulations (HPR) and the
M/SDS contains all the information required by the Hazardous Products Regulations
International Inventories
TSCA – United States Toxic Substances Control Act Section 8(b) InventoryComplies
DSL/NDSL – Canadian Domestic Substances List/Non-Domestic Substances ListComplies
EINECS/ELINCS – European Inventory of Existing Chemical Substances/European List of
Notified Chemical Substances
Complies
ENCS – Japan Existing and New Chemical Substances Complies
IECSC – China Inventory of Existing Chemical Substances Complies
KECL – Korean Existing and Evaluated Chemical Substances Complies
PICCS – Philippines Inventory of Chemicals and Chemical Substances Complies
AICS – Australian Inventory of Chemical Substances Complies
NZIoC – New Zealand Inventory of Chemicals Complies
TCSI – Taiwan Chemical Substance Inventory Complies
US Federal Regulations
TSCA Section 12(b) Export Regulations:
This product does not contain any components that are subject to TSCA 12(b) Export Notification.
SARA Section 302 (40 CFR 355) Extremely Hazardous Substances:
No components are listed as extremely hazardous substances under SARA Section 302.
SARA 311/312 Hazard Categories
See GHS classification in section 2 for applicable SARA 311/312 hazard categories under the revised 40 CFR 370 (June 13, 2016)
SARA Section 313 (40 CFR 372) Toxics Release Inventory
Does not contain any of the substances identified under Section 313 as toxic chemicals in excess of the de minimis
concentrations necessary to be subject to the supplier notification requirements.
Clean Air Act Amendments of 1990
(CAA, Section 112, 40 CFR 82):
This product does not contain any components listed as a Hazardous Air Pollutant, Flammable Substance, Toxic Substance, or
Class 1 or 2 Ozone Depletor
CWA (Clean Water Act)
This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40
CFR 122.42).
CERCLA
This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and
Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level
pertaining to releases of this material.
U.S. State Regulations
California Proposition 65
This product does not contain any Proposition 65 chemicals.
U.S. State Right-to-Know Regulations
___________________________________________________________________________________________
Page 11 / 12
___________________________________________________________________________________________
Product code: TS720 Product name: CAB-O-SIL TS-720 Fumed SilicaRevision date: 28-Nov-2019
This product contains a listed component(s) on the Massachusetts Right-to-Know Substances List, New Jersey Right-to-Know
List, Pennsylvania Right-to-Know List:. Silica (CAS# 7631-86-9).
16. OTHER INFORMATION
Pharmaceutical Use:
Not permitted
Food Additive Use:
Not permitted
References:
NIOSH Pocket Guide to Chemical Hazards, September 2005. “Silica, amorphous”. DHHS (NIOSH) Publication No. 2005-149.
National Technical Information Service, Springfield, VA. p. 277
Contacts:
Disclaimer:
The information set forth is based on information that Cabot Corporation believes to be accurate. No warranty, expressed or
implied, is intended. The information is provided solely for your information and consideration and Cabot assumes no legal
responsibility for use or reliance thereon. In the event of a discrepancy between the information on the non-English document
and its English counterpart, the English version shall supersede.
Prepared by: Cabot Corporation – Safety, Health and Environmental Affairs
Revision date: 28-Nov-2019
All names annotated with the or symbol are trademarks of the Cabot Corporation or its affiliates.
End of Safety Data Sheet
Cabot Corporation
700 E U.S. Highway 36
Tuscola, IL 61953-9643
UNITED STATES
Tel:1-217-253-3370
Fax: 1-217-253-5530
Cabot Corporation
157 Concord Road
Billerica, MA 01821
UNITED STATES
Tel: 1-978-663-3455
Fax: 1-978-670-6955
Cabot GmbH
Kronenstrasse 2
79618 Rheinfelden
GERMANY
Tel (+49) 7623.707.0
Fax: (+49) 7623.707.530
Cabot Carbon, Ltd.
Sully Moors Road
Sully, Glamorgan CF64 5RP
Wales, UNITED KINGDOM
Tel: (+44) 1446.736999
Fax: (+44)1446.737123
Cabot Corporation
3603 South Saginaw Road
Midland, MI 48640
UNITED STATES
Tel: 1-989-495-0030
Fax: 1-989-495-2139
Cabot Bluestar Ltd.
Xinghuo Industrial Garden
Yongxiu County, Jiujiang City 330319
Jiangxi Province, CHINA
Tel: (86-792) 3171616
Fax: (86-792) 3170320
___________________________________________________________________________________________
Page 12 / 12