SAFETY DATA SHEET
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE
AND OF THE COMPANY/UNDERTAKING
1.1 Product identifier
Product Name Q-Cel Inorganic microspheres
5000, 6000, 7000, 9000 series
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified use(s) Specialty engineering additive in plastics. E.g. it is added to
modify the density, impact resistance, wear resistance, provide
thermal or acoustic insulation in plastics and thermoset systems.
1.3 Details of the supplier of the safety data sheet
Company Identification Potters Industries LLC
P. O. Box 841
Valley Forge, PA 19482 USA
Telephone +1 610-651-4700
E-Mail (competent person) sds.uk@pqcorp.com
1.4 Emergency telephone number
Emergency Phone No. Potters Industries LLC +1 610-651-4200
ChemTrec (800) 424-9300
SECTION 2: HAZARDS IDENTIFICATION
2.1 Classification of the substance or mixture
GHS Classification Not classified as dangerous for supply/use.
2.2 Label elements
Hazard pictogram(s)
Signal word(s) Not applicable.
Hazard statement(s) Not applicable
Precautionary statement(s) Not applicable
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient(s) %W/W CAS No. EINECS No. /
REACH Registration
Hazard symbol(s) and
hazard statement(s)
Amorphous Sodium
Borosilicate
>99.9 50815-87-7 Exempt
Proprietary anticake
coating
<1
SECTION 4: FIRST AID MEASURES
4.1 Description of first aid measures
Eye Contact Irrigate with eyewash solution or clean water, holding the eyelids
apart, for at least 15 minutes. If symptoms persist, obtain
medical attention.
Q-Cel Hollow microspheres 5000, 6000, 7000, 9000 series
Revision: v2.1
Date of Issue : 10/2019
Date Previous Issue : 11/2017 - en -
Ref: 0440001
Potters LLC - GHS - 3
Page: 1 of 5
Skin Contact Wash affected skin with plenty of water. If symptoms occur
obtain medical attention.
Inhalation In case of accident by inhalation: remove casualty to fresh air
and keep at rest. If symptoms develop, obtain medical attention.
Ingestion Get medical advice/attention.
4.2 Most important symptoms
and effects, both acute and
delayed
Dust may cause irritation.
4.3 Indication of any immediate
medical attention and special
treatment needed
Flush the contaminated area of body with large amounts of water.
SECTION 5: FIRE-FIGHTING MEASURES
5.1 Extinguishing media
Suitable Extinguishing Media As appropriate for surrounding fire.
Unsuitable extinguishing MediaNone known.
5.2 Special hazards arising from
the substance or mixture
Non-combustible.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions,
protective equipment and
emergency procedures
Wear suitable protective clothing. Wear eye/face protection.
An approved dust mask should be worn if dust is generated
during handling.
See Also Section 8.
6.2 Environmental precautions Floats on water.
6.3 Methods and materials for
containment and cleaning up
Caution - spillages may be slippery. Avoid generation of dust.
Use vacuum equipment for collecting spilt materials, where
practicable. Transfer to a container for disposal or recovery.
6.4 Reference to other sectionsNot applicable.
SECTION 7: HANDLING AND STORAGE
7.1 Precautions for safe handlingAvoid contact with skin, eyes or clothing. Avoid generation of
dust. Wash thoroughly after handling.
Wear protective equipment to comply with good occupational
hygiene practice.
Do not eat, drink or smoke at the work place.
7.2 Conditions for safe storage,
including any incompatibilities
Keep container tightly closed and dry. In case of high humidity or
storage for extended periods of time, use plastic bags to enclose
product containers to avoid caking.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Control parameters
SUBSTANCE. Occupational Exposure Limits
UK EH40: Dust
Total inhalable: WEL 10mg/m3 8h TWA. Respirable: WEL 4mg/m3 8h
TWA. ACGIH: Particulates not otherwise classified
Inhalable TLV 10mg/m3 8h TWA. Respirable: TLV 3mg/m3 8h TWA.
OSHA: Inert or Nuisance Dust
Total dust : PEL 15mg/m3 8h TWA. Respirable fraction : PEL 5mg/m3 8h
TWA.
8.2 Exposure controls
Q-Cel Hollow microspheres 5000, 6000, 7000, 9000 series
Revision: v2.1
Date of Issue : 10/2019
Date Previous Issue : 11/2017 - en -
Ref: 0440001
Potters LLC - GHS - 3
Page: 2 of 5
8.2.1 Appropriate engineering
controls
Use only with adequate ventilation to keep exposures (airborne
levels of dust, fume, vapour etc) below recommended exposure
limits.
8.2.2 Personal Protection
Respiratory protection Avoid inhalation of dusts. Wear suitable respiratory protective
equipment if exposure to levels above the occupational exposure
limit is likely.
Eye/face protection Chemical goggles (EN 166).
Skin protection Wear suitable protective clothing and gloves. For example PVC
or rubber gloves.
8.2.3 Environmental Exposure
Controls
Local exhaust recommended.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical properties
Appearance Powder. White.
Odour Odourless.
pH (Value) Not applicable.
Freezing Point ( C) Not applicable.
Melting Point ( C) Not applicable.
Boiling Point ( C) Not applicable.
Flash Point ( C) [Closed cup] Not applicable.
Evaporation rate Not applicable.
Flammability (solid, gas) Not applicable.
Explosive Limit Ranges Not applicable.
Vapour pressure (Pascal)
Vapour Density (Air=1) Not applicable.
Density (g/ml) Not applicable.
Solubility (Water) Soluble.
Solubility (Other) Not available.
Partition Coefficient Not available.
Auto Ignition Point ( C) Not applicable.
Decomposition Temperature ( C)Not applicable.
Viscosity (mPa. s) Not applicable.
Explosive properties Not applicable.
Oxidising Properties Not applicable.
9.2 Other information Not applicable.
SECTION 10: STABILITY AND REACTIVITY
10.1 Reactivity Avoid contact with strong acids
10.2 Chemical stability Stable.
10.3 Possibility of hazardous
reactions
None known.
10.4 Conditions to avoid None known.
10.5 Incompatible materials Strong acids
10.6 Hazardous decomposition
product(s)
None known.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1 Information on toxicological effects
Acute toxicity
Ingestion Avoid ingestion. May be harmful if swallowed.
Q-Cel Hollow microspheres 5000, 6000, 7000, 9000 series
Revision: v2.1
Date of Issue : 10/2019
Date Previous Issue : 11/2017 - en -
Ref: 0440001
Potters LLC - GHS - 3
Page: 3 of 5
Inhalation When a similar material was tested for respiratory toxicity in a 6-
month intratracheal study in rats, no mortalities, untoward
reaction, or observation correlated with exposure to the material.
Minimal multifocal inflammation of the lung occurred in 90% of
males and 80% of females. No appreciable increase in fibrous
tissue was present in these lesions.
Skin Contact When tested for primary irritation potential, this material caused
mild eye irritation and slight skin irritation.
Eye Contact When tested for primary irritation potential, this material caused
mild eye irritation and slight skin irritation.
Sensitisation It is not a skin sensitiser.
Carcinogenicity IARC, NTP, OSHA, ACGIH do not list this product or any
components thereof as known or suspected carcinogen.
SECTION 12: ECOLOGICAL INFORMATION
12.1 Toxicity No data available on mixture. The following data is reported for
sodium silicates: a 96 hour median tolerance for fish (Gambusia
affnis) of 2320 ppm; a 96 hour median tolerance for water fleas
(Daphnia magna) of 247 ppm.
12.2 Persistence and
degradability
No data available on mixture.
12.3 Bioaccumulative potentialNo data available on mixture.
12.4 Mobility in soil No data available on mixture.
12.5 Results of PBT and vPvB
assessment
Not classified as PBT or vPvB.
SECTION 13: DISPOSAL CONSIDERATIONS
13.1 Waste treatment methods The waste is considered to be non hazardous. Disposal should
be in accordance with local, state or national legislation.
SECTION 14: TRANSPORT INFORMATION
14.1 UN number Not applicable
14.2 Proper Shipping Name Not classified as dangerous for transport.
Not classified as hazardous under DOT or US Transport
Recommendations.
Goods are not regulated for transport via IATA
International Maritime Dangerous Goods (IMDG) Code: Not
classified as hazardous
ADR/RID Class : Not classified as dangerous for transport.
14.3 Transport hazard class(es)Not applicable.
14.4 Packing group Not applicable.
14.5 Environmental hazards Not applicable.
14.6 Special precautions for userNot applicable.
14.7 Transport in bulk according
to Annex II of MARPOL73/78 and
the IBC Code
Not applicable.
SECTION 15: REGULATORY INFORMATION
15.1 Safety, health and environmental regulations/legislation specific for the substance or
mixture
TSCA Inventory Status: Reported/Included.
AICS Inventory Status: Reported/Included.
DSL/NDSL Inventory Status: Reported/Included.
Q-Cel Hollow microspheres 5000, 6000, 7000, 9000 series
Revision: v2.1
Date of Issue : 10/2019
Date Previous Issue : 11/2017 - en -
Ref: 0440001
Potters LLC - GHS - 3
Page: 4 of 5
German Water Hazard Classification VwVwS: WGK class 1 (low hazard to water).
1,0,0
SECTION 16: OTHER INFORMATION
Reviewed and reconfirmed, no significant changes.
This SDS was last reviewed: 10/2019
The following sections contain revisions or new statements:
Information contained in this publication or as otherwise supplied to Users is believed to be accurate
and is given in good faith, but it is for the Users to satisfy themselves of the suitability of the product for
their own particular purpose. Potters Industries gives no warranty as to the fitness of the product for
any particular purpose and any implied warranty or condition (statutory or otherwise) is excluded
except to the extent that exclusion is prevented by law. Potters Industries accepts no liability for loss or
damage (other than that arising from death or personal injury caused by defective product, if proved),
resulting from reliance on this information. Freedom under Patents, Copyright and Designs cannot be
assumed.
Q-Cel Hollow microspheres 5000, 6000, 7000, 9000 series
Revision: v2.1
Date of Issue : 10/2019
Date Previous Issue : 11/2017 - en -
Ref: 0440001
Potters LLC - GHS - 3
Page: 5 of 5
(800) 281-4975
sales@revchem.com
