Accella Polyurethane Systems
Safety Data Sheet
1. Identification of Substance:
Telephone:
24-Hr. Emergency Phone Number:
CHEMTREC (800) 424-9300
Product Name: 3001 Series A
Supplier Identification:
Accella Polyurethane Systems
Address:
0 L O O L N H Q $ Y H
5 D Q F K R & X F D P R Q J D & $
Product Use: Polyurethane isocyanate component
2. Hazards Identification
GHS Ratings:
Inhalation Toxicity Acute Tox. 4Gases>2500+<=5000ppm, Vapors>10+<=20mg/l,
Dusts&mists>1+<=5mg/l
Skin corrosive 2 Reversible adverse effects in dermal tissue, Draize score: >=
2.3 < 4.0 or persistent inflammation
Eye corrosive 2A Eye irritant: Subcategory 2A, Reversible in 21 days
Respiratory sensitizer 1 Respiratory sensitizer
Skin sensitizer 1 Skin sensitizer
Organ toxin single
exposure
3 Transient target organ effects- Narcotic effects- Respiratory
tract irritation
Organ toxin repeated
exposure
1 Significant toxicity in humans- Reliable, good quality human
case studies or epidemiological studies Presumed significant
toxicity in humans- Animal studies with significant and/or
severe toxic effects relevant to humans at generally low
exposure (guidanc
GHS Hazards
H315 Causes skin irritation
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
H332 Harmful if inhaled
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
H335 May cause respiratory irritation
H336 May cause drowsiness or dizziness
H372 Causes damage to organs through prolonged or repeated exposure
GHS Precautions
P260 Do not breathe dust/fume/gas/mist/vapors/spray
P261 Avoid breathing dust/fume/gas/mist/vapors/spray
P264 Wash hands thoroughly after handling
P270 Do not eat, drink or smoke when using this product
P271 Use only outdoors or in a well-ventilated area
P272 Contaminated work clothing should not be allowed out of the workplace
SDS for: 3001 Series A
Page 1 of 7
Printed: 9/20/2017 at 3:05:52PM
P280 Wear protective gloves/protective clothing/eye protection/face protection
P285 In case of inadequate ventilation wear respiratory protection
P312 Call a POISON CENTER or doctor/physician if you feel unwell
P314 Get Medical advice/attention if you feel unwell
P321 Specific treatment is urgent (see Section 4 First Aid measures)
P362 Take off contaminated clothing and wash before reuse
P363 Wash contaminated clothing before reuse
P302+P352 IF ON SKIN: Wash with soap and water
P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing
P304+P341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a
position comfortable for breathing
P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact
lenses if present and easy to do continue rinsing
P332+P313 If skin irritation occurs: Get medical advice/attention
P333+P313 If skin irritation or a rash occurs: Get medical advice/attention
P337+P313 Get medical advice/attention
P342+P311 Call a POISON CENTER or doctor/physician
P405 Store locked up
P403+P233 Store in a well ventilated place. Keep container tightly closed
P501 Dispose of contents/container in accordance with existing federal, state, and local
environmental control laws.
Signal Word: Danger
Acute Health Effects:
Eyes: Severe irritation, tearing, swelling, and possible damage to cornea.
Skin:Irritation, redness, swelling, skin sensitization, rash, scaling, and blistering.
Inhalation: Mucous membrane and respiratory tract irritation, tightness of chest, isocyanate sensitization.
Ingestion: Irritating and corrosive to mouth, stomach, and digestive tract.
Conditions Aggravated by Exposure:Asthma, respiratory disorders, skin
Chronic Health Effects:Isocyanates may cause skin and respiratory sensitivity in some individuals.
Sensitized individuals may react to very low levels diisocyanates below the PEL. Sensitized people who
continue to work with diisocyanates may develop symptoms sooner after each exposure. Limited evidence of
possible carcinogenic effects.
3. Composition/Data on Components:
Chemical Name CAS number Weight Concentration %
Isocyanic acid, polymethylenepolyphenylene ester 9016-87-9 50.00% - 60.00%
4,4'-Methylenediphenyl diisocyanate 101-68-8 30.00% - 40.00%
4. First Aid Measures:
After Inhalation: May cause severe irritation to upper respiratory tract and lungs, respiratory sensitization,
decreased lung capacity.
Remove from exposure area to fresh air. Administer oxygen or artificial respiration as needed. Obtain
SDS for: 3001 Series A
Page 2 of 7
Printed: 9/20/2017 at 3:05:52PM
medical attention.
After Eye Contact: Rinse opened eye for at least 15 minutes under running water.
Remove contact lenses if present and easy to do so, and continue rinsing.If irritation persists contact
physician
After Skin Contact: Remove contaminated clothing. Clean affected area with soap and plenty of water. Call
a physician if irritation or rash develops.
After Swallowing: Do not induce vomiting. If conscious, give 1 to 2 cups of milk or water to drink. Consult a
physician at once.
Notes to Physician:Treat symptomatically. Following severe exposure the patient should be kept under
medical observation for a least 48 hours.
5. Fire Fighting Measures:
Flash Point: 230 C (446 F)
LEL: N/A UEL: N/A
Upper and Lower Explosive Limits listed if known.
Suitable Extinguishing Agents: Water spray, CO2, Foam, Dry chemical
Information about Protection against Explosions and Fires:Closed containers may rupture when
exposed to extreme heat.
Dangerous Products of Decomposition: Oxides of carbon, oxides of nitrogen, isocyanates,and traces of
HCN.
Protective Equipment:Full emergency equipment with self contained breathing apparatus and full protective
clothing should be worn by firefighters.
6. Accidental Release Measures:
Person-Related Safety Precautions: Evacuate all non-essential personnel. Avoid contact with skin. Do not
breathe aerosols or vapors.
Measures for Environmental Protection:Cover and contain spill with absorbent material. Place waste in
open container. Remove to well ventilated area and dilute with ammonia solution (water 90%, concentrated
ammonia 8%, detergent 2%). Collect for proper disposal according to local, state, and federal regulations.
7. Handling and Storage:
Information for Safe Handling:Do not breathe fumes, vapors or mists. Use only with adequate ventilation.
Avoid contact with skin or eyes.Immediately report spills or leaks.
Storage Requirements:Store in dry, well ventilated area. Keep containers tightly closed. Store between
60 F-100 F.
Regulatory Requirements: Store according to all local, state, and federal regulations.
8. Exposure Controls and Personal Protection:
Other Exposure LimitsACGIH Exposure LimitsOSHA Exposure LimitsChemical Name / CAS No.
SDS for: 3001 Series A
Page 3 of 7
Printed: 9/20/2017 at 3:05:52PM
Isocyanic acid,
polymethylenepolyphenylene
ester
9016-87-9
Not EstablishedNot Established Not Established
4,4'-Methylenediphenyl
diisocyanate
101-68-8
0.005 ppm TWA (listed under
Methylene bisphenyl
isocyanate (MDI))
0.005 ppm TWA
0.02 ppm STEL
NIOSH: 0.005 ppm TWA
(listed under Methylene
bisphenyl isocyanate);
0.05 mg/m3 TWA
0.020 ppm Ceiling (10
min); 0.2 mg/m3 Ceiling
(10 min)
Engineering Controls: Use local exhaust ventilation to maintain airborne concentrations below the TLV,
especially if heating or spraying. Use only in a well ventilated area to keep vapors below exposure limits. Use
local exhaust ventilation if necessary.
General Protective and Hygienic Measures:Usual precautionary measures should be adhered to when
handling chemicals.
Personal Protective Equipment:
Respiratory Protection:Do not inhale vapors. Use NIOSH approved respiratory protection if TLV/PEL is
exceeded. Do not enter storage area unless adequately ventilated.
Hand Protection:Protective butyl rubber or nitrile rubber gloves.
Eye Protection: Chemical safety goggles.
Body Protection: Impervious protective work clothing. Launder separately.
9. Physical and Chemical Properties:
Physical properties listed where known.
Brown liquidAppearance: MustyOdor:
N/AVapor Pressure: N/AOdor threshold:
N/AVapor Density: N/ApH:
1.20Specific Gravity N/AMelting point:
N/AFreezing point: N/ASolubility:
N/ABoiling range: 446 F,230 CFlash point:
N/AEvaporation rate: N/AFlammability:
N/AExplosive Limits: N/APartition coefficient
(n-octanol/water):
240 CAutoignition temperature: N/ADecomposition temperature:
10. Stability and Reactivity:
Chemical Incompatible Materials: Avoid contact with water, amines, strong bases, and alcohols
Hazardous Polymerization:Not expected to occur under normal conditons.
SDS for: 3001 Series A
Page 4 of 7
Printed: 9/20/2017 at 3:05:52PM
Dangerous Products of Decomposition: Oxides of carbon, oxides of nitrogen, hydrocarbons, isocyanates,
and traces of HCN.
11. Toxicological Information:
Mixture Toxicity
Inhalation Toxicity LC50: 2mg/L
Component Toxicity
9016-87-9 Isocyanic acid, polymethylenepolyphenylene ester
Dermal LD50: 490 mg/L (Rat) Inhalation LC50: 490 mg/m3 (Rat)
101-68-8 4,4'-Methylenediphenyl diisocyanate
Dermal LD50: 1 mg/L (Rat) Inhalation LC50: 369 mg/m3 (Rat)
Individual Toxicity Values Listed if Known
Acute Toxicity:
Eyes: Severe irritation, tearing, swelling, and possible damage to cornea.
Skin: Irritation, redness, swelling, skin sensitization, rash, scaling, and blistering.
Inhalation: Mucous membrane and respiratory tract irritation, tightness of chest, isocyanate sensitization.
Ingestion: Irritating and corrosive to mouth, stomach, and digestive tract.
Chronic Effects: Isocyanates may cause skin and respiratory sensitivity in some individuals. Sensitized
individuals may react to very low levels diisocyanates below the PEL. Sensitized people who continue to work
with diisocyanates may develop symptoms sooner after each exposure. Limited evidence of possible
carcinogenic effects.
Routes of Entry:Inhalation, Ingestion, skin contact, eye contact.
Target Organs: Respiratory tract, eyes, skin.
Chemicals with Known or Possible Carcinogenic Effects:
Carcinogen RatingCAS Number Description % Weight
NoneNone
12. Ecological Information:
General Information: Based on experience, no adverse effects are to be expected if correct disposal
procedures have been followed as indicated in section 13. Individual component ecotoxicity listed if known.
Component Ecotoxicity
4,4'-Methylenediphenyl
diisocyanate
24 Hr LC50 Brachydanio rerio: >500 mg/L
24 Hr EC50 Daphnia magna: >500 mg/L
13. Disposal Considerations:
Recommendation:Observe local requirements. Dispose of in accordance with local/state/federal regulations.
Empty Container Precautions:Empty containers retain product residue; observe all precautions for product.
Do not heat or cut empty container with electric or gas torch because highly toxic vapors and
SDS for: 3001 Series A
Page 5 of 7
Printed: 9/20/2017 at 3:05:52PM
gases are formed. Do not reuse without thorough commercial cleaning and reconditioning. If container is to be
disposed, ensure all product residues are removed and container is empty prior to disposal. Contact the
Reusable Industrial Packaging Association (RIPA) at 301-577-3786 to find a drum re-conditioner in North
America (www.reusablepackaging.org).
14. Transport Information:
DOT Regulated Components:
4,4′ Methylene Diphenyl Diisocyanate
Reportable Quantity: 5000 lbs
When in individual containers of less than the substance RQ, this material ships as non-regulated. Containers
above RQ ship as:
Hazard ClassPacking GroupUN NumberProper Shipping NameAgency
None
15. Regulatory Information:
OSHA HAZARD COMMUNICATION STANDARD: This material is classified as hazardous in accordance with
OSHA 29 CFR 1910.1200.
SARA 311/312 Hazard Categories:Acute health hazard, chronic health hazard
California Proposition 65
(Safe Drinking Water and Toxic Enforcement Act of 1986)
This product contains no substances known to the State of California to cause cancer, birth defects or other
reproductive harm, at levels which would require a warning under the statute unless otherwise listed:
Warning: This product contains chemicals known to the State of California to cause cancer and/or birth
defects or other reproductive harm:
– None
Massachusetts Right To Know List:
4,4′-Methylenediphenyl diisocyanate 101-68-8 30 to 40 %
New Jersey Right To Know List:
Isocyanic acid, polymethylenepolyphenylene ester 9016-87-9 50 to 60 %
Pennsylvania Right To Know List:
4,4′-Methylenediphenyl diisocyanate 101-68-8 30 to 40 %
SARA 302 Extremely Hazardous Substances:
– None
Chemicals subject to SARA 313 Reporting:
4,4′-Methylenediphenyl diisocyanate 101-68-8 30 to 40 % Emissions
Isocyanic acid, polymethylenepolyphenylene ester 9016-87-9 50 to 60 % Emissions
All Components ListedRegulationCountry
Canada Canada DSL Yes
US Toxic Substances Control Act Yes
SDS for: 3001 Series A
Page 6 of 7
Printed: 9/20/2017 at 3:05:52PM
16. Other Information:
Safety Data Sheet issued by Product Safety Department
This information is furnished without warranty, expressed or implied, except that it is accurate to the best
knowledge of Accella Polyurethane Systems. The data on these sheets relates only to the specific material
designated herein. Accella Polyurethane Systems assumes no legal responsibility for use or reliance upon
this data. It is the user’s responsibility to ensure that their activities comply with federal, state, or local laws.
Reviewer Revision 2 Date revised: 2017-09-20
Date Prepared: 9/20/2017
SDS for: 3001 Series A
Page 7 of 7
Printed: 9/20/2017 at 3:05:52PM
Accella Polyurethane Systems
Safety Data Sheet
1. Identification of Substance:
Product Name: 3001 Series B
Supplier Identification:
Accella Polyurethane Systems
Address:
8530 Milliken Ave. Adie
Rancho Cucamonga, CA 91730
Telephone:
(909) 941-4999
24-Hr. Emergency Phone Number:
CHEMTREC (800) 424-9300
Product Use: Polyurethane polyol component
2. Hazards Identification:
GHS Ratings:
Skin sensitizer 1 Skin sensitizer
GHS Hazards
H317 May cause an allergic skin reaction
GHS Precautions
P261 Avoid breathing dust/fume/gas/mist/vapors/spray
P272 Contaminated work clothing should not be allowed out of the workplace
P280 Wear protective gloves/protective clothing/eye protection/face protection
P321 Specific treatment is urgent (see Section 4 First Aid measures)
P363 Wash contaminated clothing before reuse
P302+P352 IF ON SKIN: Wash with soap and water
P333+P313 If skin irritation or a rash occurs: Get medical advice/attention
P501 Dispose of contents/container in accordance with existing federal, state, and local
environmental control laws.
Signal Word: Warning
Acute Toxicity:
Eyes:Liquid may cause irritation.
Skin: Minor potential for irritation.
Inhalation:Liquid may cause irritation.
Ingestion: Consult physician.
Chronic Effects:Not expected to cause any adverse chronic health effects.
SDS for: 3001 Series B
Page 1 of 5
Printed: 9/20/2017 at 1:20:13PM
3. Composition/Data on Components:
Chemical Name CAS number Weight Concentration %
1,4-Diazabicyclo[2.2.2]octane 280-57-9 0.10% – 1.00%
4. First Aid Measures:
Inhalation:Move to fresh air. If breathing is difficult, give oxygen.
After Eye Contact:Rinse opened eye for at least 15 minutes under running water.
Remove contact lenses if present and easy to do so, and continue rinsing.
After Skin Contact:Clean affected area with soap and plenty of water.
After Swallowing:Consult physician.
Notes to Physician:Treat symptomatically
5. Fire Fighting Measures:
Flash Point: 200 C (392 F)
LEL: N/A UEL: N/A
Flammable limits listed if known
Suitable Extinguishing Agents: Water spray, CO2, Foam, Dry chemical
Information about Protection against Explosions and Fires:Closed containers may
rupture when exposed to extreme heat.
Dangerous Products of Decomposition: Oxides of carbon, hydrocarbons.
Protective Equipment: Firefighters should wear a pressure demand self-contained breathing apparatus and protective
clothing.
6. Accidental Release Measures:
Person-Related Safety Precautions:Avoid contact with skin and eyes.
Measures for Environmental Protection: Cover and contain spill with absorbent material. Collect for proper disposal
according to local, state, and federal regulations.
7. Handling and Storage:
SDS for: 3001 Series B
Page 2 of 5
Printed: 9/20/2017 at 1:20:13PM
Information for Safe Handling:Avoid contact with skin or inhalation.
Storage Requirements:Store in dry, well ventilated area. Keep containers tightly closed. Store between 60 F-100 F.
Material may settle.
8. Exposure Controls and Personal Protection:
Other Exposure LimitsACGIH Exposure LimitsOSHA Exposure LimitsChemical Name / CAS No.
1,4-Diazabicyclo[2.2.2]octane
280-57-9
Not EstablishedNot Established Not Established
Engineering Controls:No specific measures required.
General Protective and Hygienic Measures: Usual precautionary measures should be adhered to when handling
chemicals.
Respiratory Protection:None required if work area is properly ventilated.
Protection of Hands: Protective chemical resistant gloves.
Eye Protection: Safety glasses.
Body Protection:Protective work clothing. Launder separately.
9. Physical and Chemical Properties:
Physical properties listed where known.
MildOdor:Appearance: & O H D U V W U D Z F R O R U O L T X L G
Vapor Pressure:N/A N/AOdor threshold:
N/ApH:
N/AMelting point:
N/ASolubility:
392 F,200 CFlash point:
N/AFlammability:
Vapor Density:N/A
Specific Gravity1
Freezing point:N/A
Boiling range:100 C
Evaporation rate:N/A
Explosive Limits:N/A N/APartition coefficient
(n-octanol/water):
N/AAutoignition temperature: N/ADecomposition temperature:
10. Stability and Reactivity:
Incompatible Materials: Avoid contact with isocyanates and strong oxidizing agents.
Hazardous Polymerization:Not expected to occur.
Dangerous Products of Decomposition:Oxides of carbon, hydrocarbons.
11. Toxicological Information:
Mixture Toxicity
Component Toxicity
280-57-9 1,4-Diazabicyclo[2.2.2]octane
Oral LD50: 1,700 mg/kg (Rat) Dermal LD50: 3,200 mg/kg (Rabbit)
SDS for: 3001 Series B
Page 3 of 5
Printed: 9/20/2017 at 1:20:13PM
Toxicity Values Listed if Known
Acute Toxicity:
Eyes:Liquid may cause irritation.
Skin: Minor potential for irritation.
Inhalation:Liquid may cause irritation.
Ingestion: Consult physician.
Chronic Effects:May cause skin sensitization.
Routes of Entry : Ingestion, inhalation, skin contact.
Target Organs: Skin.
Chemicals with Known or Possible Carcinogenic Effects:
Carcinogen RatingCAS Number Description % Weight
NoneNone
12. Ecological Information:
General Information:Based on experience, no adverse effects are to be expected if correct disposal procedures have
been followed as indicated in section 13. Individual component ecotoxicity listed if known.
Component Ecotoxicity
1,4-Diazabicyclo[2.2.2]octane 96 Hr LC50 Pimephales promelas: 1510 – 1980 mg/L [flow-through]
13. Disposal Considerations:
Recommendation: Observe local requirements. Dispose of in accordance with local/state/federal regulations.
Empty Container Precautions:Recondition or dispose of empty container in accordance with governmental regulations.
If container is to be disposed, ensure all product residues are removed and container is empty prior to disposal.
14. Transport Information:
Not considered a dangerous good according to transport regulations unless specifically cited below:
Hazard ClassPacking GroupUN NumberProper Shipping NameAgency
None
15. Regulatory Information:
OSHA HAZARD COMMUNICATION STANDARD: This material is not classified as hazardous in accordance with OSHA
29 CFR 1910.1200.
SARA 311/312 Hazard Categories:None.
California Proposition 65
(Safe Drinking Water and Toxic Enforcement Act of 1986)
SDS for: 3001 Series B
Page 4 of 5
Printed: 9/20/2017 at 1:20:13PM
This product contains no substances known to the State of California to cause cancer, birth defects or other reproductive
harm, at levels which would require a warning under the statute unless otherwise listed:
Warning: This product contains chemicals known to the State of California to cause cancer and/or birth
defects or other reproductive harm:
– None
Massachusetts Right To Know List:
– None
New Jersey Right To Know List:
– None
Pennsylvania Right To Know List:
– None
SARA 302 Extremely Hazardous Substances:
– None
Chemicals subject to SARA 313 Reporting:
– None
All Components ListedRegulationCountry
Canada Canada DSL Yes
US Toxic Substances Control Act Yes
16. Other Information:
Safety Data Sheet issued by Product Safety Department
This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of
Accella Polyurethane Systems. The data on these sheets relates only to the specific material designated herein. Accella
Polyurethane Systems assumes no legal responsibility for use or reliance upon this data. It is the user’s responsibility
to ensure that their activities comply with federal, state, or local laws.
Reviewer Revision 2 Date revised: 2017-09-20
Date Prepared: 9/20/2017
SDS for: 3001 Series B
Page 5 of 5
Printed: 9/20/2017 at 1:20:13PM