SAFETY DATA SHEET
Date Issued : 10/10/2017
SDS No : F-140 REV 1 PART B
Date Revised : 12/16/2020
Revision No : 1
F-140 REV 1 PART B
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: F-140 REV 1 PART B
GENERAL USE: Polyurethane curative
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
BJB Enterprises, Inc.
14791 Franklin Avenue
Tustin, CA 92780
Emergency Phone: (714) 734-8450
CHEMTREC (USA & Canada): (800) 424-9300
or (703) 527-3887 CCN# 2820
2. HAZARDS IDENTIFICATION
GHS CLASSIFICATIONS
Health:
Skin Sensitization, Category 1
Environmental:
Acute Hazards to the Aquatic Environment, Category 2
Chronic Hazards to the Aquatic Environment, Category 3
GHS LABEL
Exclamation
mark
SIGNAL WORD: WARNING
HAZARD STATEMENTS
H317: May cause an allergic skin reaction.
H401: Toxic to aquatic life.
H412: Harmful to aquatic life with long lasting effects.
PRECAUTIONARY STATEMENTS
Prevention:
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P272: Contaminated work clothing should not be allowed out of the workplace.
P280: Wear protective gloves.
P273: Avoid release to the environment.
Response:
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
P362+P364: Take off contaminated clothing and wash it before reuse.
P391: Collect spillage.
Disposal:
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Page 1 of 5
Chemical Name Wt.% CAS
Polyether polyol mixture 80 – 100Proprietary
1,3-Benzenediamine, 4-methyl-2,6-bis(methylthio)- 1 – 5102093-68-5
1,3-Benzenediamine, 2-methyl-4,6-bis(methylthio)- 0.5 – 1104983-85-9
4. FIRST AID MEASURES
EYES: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Get
medical advice/attention if irritation develops.
SKIN: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical advice/attention if irritation or rash
develops. Wash clothing before reuse.
INGESTION: If swallowed, call a physician immediately. Do not induce vomiting unless directed to do so by medical personnel. Provided the
patient is conscious, wash out mouth with water. Never give anything by mouth to an unconscious person.
INHALATION: Remove to fresh air. Seek medical advice/attention if breathing becomes difficult or if respiratory irritation develops.
NOTES TO PHYSICIAN: Symptomatic and supportive therapy as needed. Following severe exposure medical follow-up should be monitored
for at least 48 hours.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Water spray, carbon dioxide, dry chemical, or foam.
HAZARDOUS COMBUSTION PRODUCTS: Carbon monoxide, carbon dioxide, nitrogen oxides, sulfur oxides, silicon oxides, and
formaldehyde.
FIRE FIGHTING PROCEDURES: Cool fire exposed containers with water spray. Remove containers from the fire area if possible. Do not
release runoff from fire control methods to sewers or waterways.
FIRE FIGHTING EQUIPMENT: Firefighters should wear positive pressure self-contained breathing apparatus (SCBA) and consider use of
unmanned hose holders or monitor nozzles for fighting large fires.
6. ACCIDENTAL RELEASE MEASURES
SPILL AND LEAK PROCEDURES: Evacuate the area. Clean-up should only be performed by trained personnel. People dealing with a major
spill should wear full protective clothing including appropriate respiratory protection. Prevent product spill from entering sewers or waterways.
Neutralize small spills with a decontaminant.
LARGE SPILL: Contain and absorb large spills onto an inert, non-flammable adsorbent carrier (such as earth or sand). Shovel into open-top
drums or plastic bags for further decontamination, if necessary. Wash the spill area clean with a liquid decontaminant. Remove and properly
dispose of residues. Notify applicable government authorities if release is reportable. (See CERCLA in Section 15).
ENVIRONMENTAL PRECAUTIONS
WATER SPILL: Do not discharge into drains, surface waters, or groundwater.
GENERAL PROCEDURES: Refer to section 8 of SDS for personal protection details.
RELEASE NOTES: Composition and extent of any spill should be evaluated against local regulations and reported to the proper agencies, if
necessary.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Avoid breathing vapor over open
containers. Avoid open container exposure to damp air. Avoid breathing aerosols, mists, and vapors.
HANDLING: Use appropriate personal protective equipment as specified in Section 8. Handle in a well-ventilated area. Handle and use in a
manner consistent with good industrial/manufacturing techniques and practices.
STORAGE: Store in a dry and well-ventilated place, away from excessive heat, in original or similar container. Avoid unnecessary contact.
Protect from freezing. Containers should be tightly sealed to prevent contamination with foreign materials.
STORAGE TEMPERATURE: 65-80 F (18-27 C)
SHELF LIFE: 6 months from date of shipment under manufacturers recommended storage conditions.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Page 2 of 5
F-140 REV 1 PART B
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below
recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Safety goggles or glasses are recommended. Plastic face shields should be used for complete face protection to protect
against possible splashing or spraying of material. ANSI Z87.1 or approved equivalent.
SKIN: Chemical-resistant gloves and chemical goggles, face-shield, and synthetic apron or coveralls should be used to prevent contact with
eyes, skin, or clothing. Wear nitrile or neoprene gloves. Chemical resistant gloves lined with polyethylene offer maximum protection.
RESPIRATORY: Exhaust ventilation recommended. An organic vapor cartridge or fresh air supplied respirator (NIOSH approved) may be
necessary for certain applications. Consider the type of application, environmental concentrations, and other materials being used concurrently
when determining respirator use and selection. Observe OSHA regulations for respirator use (29 CFR 1910.134).
PROTECTIVE CLOTHING: Protective clothing should be selected and used in accordance with “Guidelines for the Selection of Chemical
Protective Clothing” published by ACGIH.
WORK HYGIENIC PRACTICES: Contaminated clothing should be changed and washed before reuse. Eating, drinking and smoking in
immediate work area should be prohibited. Wash hands before eating.
OTHER USE PRECAUTIONS: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.
Training is important. Follow all label precautions.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
ODOR: Slight amine
COLOR: Amber
pH: No data available
PERCENT VOLATILE: 0.05
FLASH POINT AND METHOD: > 182.2 C (360 F) Pensky-Martens CC
VAPOR PRESSURE: No data available
VAPOR DENSITY: No data available
BOILING POINT: No data available
SOLUBILITY IN WATER: Slightly soluble
SPECIFIC GRAVITY: 1.018 (water=1) at 25 C (77 F)
VISCOSITY #1: 1000 Centipoise at 25 C (77 F)
(VOC): < 0.51 g/l Calculated. Theoretical VOC minus water and exempt solvents.
10. STABILITY AND REACTIVITY
REACTIVITY: Hazardous reactions will not occur under normal transport or storage conditions.
STABILITY: This product is stable under normal ambient conditions of temperature and pressure.
CONDITIONS TO AVOID: High temperatures, moisture, and freezing conditions.
POSSIBILITY OF HAZARDOUS REACTIONS: No data available
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, nitrogen oxides, sulfur oxides, silicon oxides, and
formaldehyde.
INCOMPATIBLE MATERIALS: Isocyanates, strong acids, strong bases, and strong oxidizing agents.
11. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY
Chemical Name ORAL LD50 DERMAL LD50 INHALATION LC 50
Polyether polyol mixture No data available No data available No data available
1,3-Benzenediamine, 4-methyl-2,6-bis(methylthio)- No data available No data available No data available
1,3-Benzenediamine, 2-methyl-4,6-bis(methylthio)- No data available No data available No data available
Page 3 of 5
F-140 REV 1 PART B
SKIN CORROSION/IRRITATION: No data available
SERIOUS EYE DAMAGE/IRRITATION: No data available
RESPIRATORY OR SKIN SENSITISATION: May cause sensitization by skin contact.
GERM CELL MUTAGENICITY: No data available
REPRODUCTIVE TOXICITY: No data available
STOT-SINGLE EXPOSURE: No data available
STOT-REPEATED EXPOSURE: No data available
ASPIRATION HAZARD: No data available
12. ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Avoid
release to the environment.
CHEMICAL FATE INFORMATION: No data available
BIOACCUMULATION/ACCUMULATION: No data available
ENVIRONMENTAL DATA: This product may cause risk of hazardous effects to the environment.
DISTRIBUTION: No data available
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed
waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of
environmental protections and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and
runoff and contact with soil, waterways, drains and sewers.
14. TRANSPORT INFORMATION
DOT (DEPARTMENT OF TRANSPORTATION): Not Regulated
AIR (ICAO/IATA): Not Regulated
VESSEL (IMO/IMDG): Not Regulated
15. REGULATORY INFORMATION
UNITED STATES
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZ ATION ACT)
311/312 HEALTH HAZARDS: Refer to Section 2 for hazard classification.
313 REPORTABLE INGREDIENTS: This product does not contain any substances subject to the reporting requirements of Section 313 of
Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
CERCLA (COMPREHENSIVE ENVIRONMENTAL RESPONSE, COMPE NSATION, AND LIABILITY ACT)
CERCLA REGULATORY: This product does not contain any substances regulated as a hazardous substance under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302).
TSCA (TOXIC SUBSTANCE CONTROL ACT)
TSCA REGULATORY: This product does not contain any substances subject to TSCA Section 12(b) export notification.
TSCA STATUS: This product or its components are listed in or exempt from the TSCA inventory requirements.
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA )
29 CFR1910.119---PROCESS SAFETY MANAGEMENT OF HIGHL Y HAZARDOUS CHEMICALS: None of the chemicals in this
product are considered highly hazardous by OSHA.
CALIFORNIA PROPOSITION 65: WARNING: This product can expose you to chemicals including [see table below], which is [are]
known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Chemical Name Wt.% Listed
Naphthalene < 0.001 Cancer
Page 4 of 5
F-140 REV 1 PART B
OSHA HAZARD COMM. RULE: The contents of the SDS comply with the OSHA Hazard Communication Standard 29 CFR 1910.1200.
CANADA
WHMIS (WORKPLACE HAZARDOUS MATERIALS INFORMATION SY STEM): This product has been classified according to the
hazard criteria of the CPR and the SDS contains all the information required by the CPR.
DOMESTIC SUBSTANCE LIST (INVENTORY): All components in this product are listed in or exempted from the Domestic Substances
List (DSL) or the Non-Domestic Substances List (NDSL).
16. OTHER INFORMATION
REASON FOR ISSUE: Revision
Date Revised: 12/16/2020
REVISION SUMMARY: This SDS replaces the 10/10/2017 SDS.
HMIS RATING
HEALTH 2
FLAMMABILITY 1
PHYSICAL HAZARD 0
PERSONAL PROTECTION X
NFPA CODES
1
2 0
HMIS RATINGS NOTES: Personal Protection: See Section 8
MANUFACTURER DISCLAIMER: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of BJB Enterprises, Inc. The data on this sheet relates only to the specific material designated herein. BJB Enterprises, Inc. assumes
no legal responsibility for use or reliance upon this data.
Page 5 of 5
F-140 REV 1 PART B