SAFETY DATA SHEET
Date issued : 10/15/2015
SDS number : M-3170 REV 1 PART A
Date revised : 02/18/2022
Revision number : 2
M-3170 REV 1 PART A
1. Identification
Product identifier: M-3170 REV 1 PART A
Relevant identified uses: Polyurethane resin
Manufacturer / Supplier Emergency telephone number (24 hour)
BJB Enterprises, Inc.
14791 Franklin Avenue
Tustin, CA 92780
Emergency Phone: (714) 734-8450
CHEMTREC (USA & Canada): (800) 424-9300
or (703) 527-3887 CCN# 2820
2. Hazard identification
Classification of the substance or mixture
This product does not meet the criteria for classification.
Label elements
Not Applicable
3. Composition/information on ingredients
Chemical name % w/w CAS No.
Polyurethane prepolymer 60 – 100Proprietary
1,2-Cyclohexanedicarboxylic acid, 1,2-dinonyl ester, branched and linear 10 – 30474919-59-0
Toluene diisocyanate < 0.126471-62-5
4. First-aid measures
Eye: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Get
medical advice/attention if irritation develops.
Skin: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical advice/attention if irritation or rash
develops. Wash clothing before reuse.
Ingestion: If swallowed, call a physician immediately. Do not induce vomiting unless directed to do so by medical personnel. Provided the patient
is conscious, wash out mouth with water. Never give anything by mouth to an unconscious person.
Inhalation: Remove to fresh air. Seek medical advice/attention if breathing becomes difficult or if respiratory irritation develops.
Indication of immediate medical attention and special treatment needed, if necessary: Symptomatic and supportive therapy as needed.
Following severe exposure medical follow-up should be monitored for at least 48 hours.
5. Fire-fighting measures
Suitable extinguishing media: Water spray, carbon dioxide, dry chemical, or foam.
Hazardous combustion products: Carbon monoxide, carbon dioxide, nitrogen oxides, and hydrogen cyanide.
Fire fighting procedures: Cool fire exposed containers with water spray. Remove containers from the fire area if possible. Do not release runoff
from fire control methods to sewers or waterways.
Fire fighting equipment: Firefighters should wear positive pressure self-contained breathing apparatus (SCBA) and consider use of unmanned
hose holders or monitor nozzles for fighting large fires.
Page 1 of 5
6. Accidental release measures
Small spill: Evacuate unnecessary personnel from the spill area. Wear necessary personal protective equipment (PPE) as specified in the SDS or
the site emergency response plan. Eliminate all sources of ignition. Ensure adequate ventilation. Dike and contain spill. Prevent product from
entering drains or waterways. Absorb with non-combustible material (such as sand, earth, diatomaceous earth, or vermiculite) and transfer to a
container for disposal according to local/national regulations.
Environmental precautions
Water spill: Do not discharge into drains, surface waters, or groundwater.
General procedures: Refer to section 8 of SDS for personal protection details.
Release notes: Composition and extent of any spill should be evaluated against local regulations and reported to the proper agencies, if necessary.
7. Handling and storage
General procedures: Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Avoid breathing vapor over open containers.
Avoid open container exposure to damp air. Avoid breathing aerosols, mists, and vapors.
Precautions for safe handling: Use appropriate personal protective equipment as specified in Section 8. Handle in a well-ventilated area. Handle
and use in a manner consistent with good industrial/manufacturing techniques and practices.
Conditions for safe storage: Store in a dry and well-ventilated place, away from excessive heat, in original or similar container. Avoid
unnecessary contact. Protect from freezing. Containers should be tightly sealed to prevent contamination with foreign materials.
Storage temperature: 65-80 F (18-27 C)
Shelf life: 6 months from date of shipment under manufacturers recommended storage conditions.
8. Exposure controls/personal protection
Exposure controls
Control parameters
Occupational exposure limit values
Chemical name Type ppm mg/m
3
Toluene diisocyanate ACGIH TLV STEL 0.005 -
Appropriate engineering controls: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels
below recommended exposure limits.
Individual protection measures, such as personal protective equipment
Eye / face protection: Safety goggles or glasses are recommended. Plastic face shields should be used for complete face protection to protect
against possible splashing or spraying of material. ANSI Z87.1 or approved equivalent.
Skin protection - hand protection: Chemical-resistant gloves and chemical goggles, face-shield, and synthetic apron or coveralls should be
used to prevent contact with eyes, skin, or clothing. Wear nitrile or neoprene gloves. Chemical resistant gloves lined with polyethylene offer
maximum protection.
Respiratory protection: Exhaust ventilation recommended. An organic vapor cartridge or fresh air supplied respirator (NIOSH approved) may
be necessary for certain applications. Consider the type of application, environmental concentrations, and other materials being used
concurrently when determining respirator use and selection. Observe OSHA regulations for respirator use (29 CFR 1910.134).
Skin protection - other: Protective clothing should be selected and used in accordance with "Guidelines for the Selection of Chemical
Protective Clothing" published by ACGIH.
Occupational hygiene practices: Contaminated clothing should be changed and washed before reuse. Eating, drinking and smoking in immediate
work area should be prohibited. Wash hands before eating.
Other use precautions: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Training is
important. Follow all label precautions.
9. Physical and chemical properties
Physical state: Viscous liquid
Color: Pale yellow
Odor: Slight
Page 2 of 5
M-3170 REV 1 PART A
pH: No data available
Initial boiling point and boiling range: No data available
Flash point: > 160 C (320 F) Pensky-Martens CC
Vapor pressure: No data available
Relative vapor density: No data available
Relative density: 1.085 (water=1) at 25 C (77 F)
Solubility: Reacts slightly with water
Dynamic viscosity: 3165 Centipoise at 25 C (77 F)
VOC content: < 2 g/l Calculated. Theoretical VOC minus water and exempt solvents.
10. Stability and reactivity
Reactivity: Hazardous reactions will not occur under normal transport or storage conditions.
Chemical stability: This product is stable under normal ambient conditions of temperature and pressure.
Conditions to avoid: High temperatures, moisture, and freezing conditions.
Possibility of hazardous reactions: No data available
Hazardous decomposition products: Carbon monoxide, carbon dioxide, nitrogen oxides, and hydrogen cyanide.
Incompatible materials: Water, alcohols, and oxidizing agents.
11. Toxicological information
Acute toxicity
Chemical name
LD50 (oral)
mg/kg(rat)
LD50 (dermal)
mg/kg(rabbit)
LC50 (inhalation)
mg/l
Polyurethane prepolymer No data available No data available No data available
1,2-Cyclohexanedicarboxylic acid, 1,2-dinonyl ester, branched
and linear
> 5000 mg/kg Rat > 2000 mg/kg Rat No data available
Toluene diisocyanate 3360 mg/kg Rat 10000 mg/kg Rabbit 0.35 mg/l Rat
Skin corrosion / irritation: No data available
Serious eye damage / irritation: No data available
Respiratory or skin sensitization: No data available
Germ cell mutagenicity: No data available
Carcinogenicity
Chemical name NTP IARC
Toluene diisocyanate 2 2B
Reproductive toxicity: No data available
Specific Target Organ Toxicity – single exposure: No data available
Specific Target Organ Toxicity – repeated exposure: No data available
Aspiration hazard: No data available
12. Ecological information
Ecotoxicological information: No specific ecological data are available for this product. Refer to Section 6 for information regarding accidental
release and Section 15 for regulatory reporting information.
Persistence and degradability: No data available
Bioaccumulative potential: No data available
Other adverse effects: No data available
Mobility in soil: No data available
Page 3 of 5
M-3170 REV 1 PART A
13. Disposal considerations
Disposal methods: The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed
waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of
environmental protections and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and
runoff and contact with soil, waterways, drains and sewers.
14. Transport information
USA Department of Transport Regulations (DOT): Not Regulated
ICAO / IATA – air: Not Regulated
IMO / IMDG – sea: Not Regulated
15. Regulatory information
UNITED STATES
SARA Section 311/312 Hazard Categories
311/312 Health hazards: None Known
313 reportable ingredients: This product does not contain any substances subject to the reporting requirements of Section 313 of Title III of
the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
CERCLA Hazardous Substances and Reportable Quantities (RQ)
CERCLA regulatory: This product contains one or more substances regulated as a hazardous substance under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302).
Chemical name % w/w CERCLA rq
Toluene diisocyanate < 0.1 100 lbs.
TSCA (The Toxic Substances Control Act)
TSCA regulatory: This product does not contain any substances subject to TSCA Section 12(b) export notification.
TSCA Status: This product or its components are listed in or exempt from the TSCA inventory requirements.
CAA 112(b) Hazardous Air Pollutants
Chemical name % w/wCAS No.
Toluene diisocyanate < 0.126471-62-5
Occupational safety and health administration (osha)
29 cfr1910.119---process safety management of highly hazardous chemicals: None of the chemicals in this product are considered highly
hazardous by OSHA.
California Proposition 65: WARNING: This product can expose you to chemicals including [see table below], which is [are] known to the
State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Chemical name % w/w Listed
Toluene diisocyanate < 0.1 Cancer
Naphthalene < 0.0001 Cancer
USA OSHA Hazard Communication Standard (29CFR 1910.1200): The contents of the SDS comply with the OSHA Hazard
Communication Standard 29 CFR 1910.1200.
CANADA
WHMIS Regulatory Status: This product has been classified according to the hazard criteria of the CPR and the SDS contains all the
information required by the CPR.
Domestic Substances List (DSL) / Non-Domestic Substances List (NDSL): All components in this product are listed in or exempted from the
Domestic Substances List (DSL) or the Non-Domestic Substances List (NDSL).
16. Other information
Page 4 of 5
M-3170 REV 1 PART A
Reason for issue: Revision
Date revised: 02/18/2022
Revision summary: This SDS replaces the 10/15/2018 SDS.
HMIS rating
Health 1
Flammability 1
Physical hazard 0
Personal protection X
NFPA codes
1
1 0
HMIS ratings notes: Personal Protection: See Section 8
Manufacturer disclaimer: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of
BJB Enterprises, Inc. The data on this sheet relates only to the specific material designated herein. BJB Enterprises, Inc. assumes no legal
responsibility for use or reliance upon this data.
Page 5 of 5
M-3170 REV 1 PART A