3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003 09/26/19
__________________________________________________________________________________________
Page 1 of 11
Safety Data Sheet
Copyright,2019,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from
3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
Document Group:32-6438-9Version Number:2.01Issue Date:09/26/19Supercedes Date:01/28/16
SECTION 1: Identification
1.1. Product identifier
3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003
Product Identification Numbers
ID NumberUPCID NumberUPC60-4550-8216-860-4550-8217-660-4550-8218-460-4550-8222-6
7010363192, 7100061951, 7100152680, 7010363190
1.2. Recommended use and restrictions on use
Recommended use
Automotive, Removal of Imperfections from Painted Surfaces
1.3. Supplier s details
MANUFACTURER:3MDIVISION:Automotive AftermarketADDRESS:3M Center, St. Paul, MN 55144-1000, USATelephone:1-888-3M HELPS (1-888-364-3577)
1.4. Emergency telephone number
1-800-364-3577 or (651) 737-6501 (24 hours)
SECTION 2: Hazard identification
The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200.
This information may be different from the actual product label information for labels regulated by other agencies.
2.1. Hazard classification
Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200.
2.2. Label elements
Signal word
Not applicable.
3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003 09/26/19
__________________________________________________________________________________________
Page 2 of 11
Symbols
Not applicable.
Pictograms
Not applicable.
22% of the mixture consists of ingredients of unknown acute inhalation toxicity.
SECTION 3: Composition/information on ingredients
IngredientC.A.S. No.% by WtWater7732-18-5 45 – 70 Trade Secret *Aluminum Oxide1344-28-1 5 – 10 Trade Secret *DISTILLATES (PETROLEUM), ACID TREATED,
LIGHT
64742-14-9 5 – 10 Trade Secret *HYDROTREATED HEAVY NAPHTHA
(PETROLEUM)
64742-48-9 5 – 10 Trade Secret *Decamethylcyclopentasiloxane541-02-6 3 – 7 Trade Secret *Glycerin56-81-5 3 – 7 Trade Secret *Dodecamethylcyclohexasiloxane540-97-6 1 – 5 Trade Secret *White Mineral Oil (Petroleum)8042-47-5<= 0.5 Trade Secret *
*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade
secret.
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation:
No need for first aid is anticipated.
Skin Contact:
No need for first aid is anticipated.
Eye Contact:
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.
If Swallowed:
Rinse mouth. If you feel unwell, get medical attention.
4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1. Information on toxicological effects.
4.3. Indication of any immediate medical attention and special treatment required
Not applicable
SECTION 5: Fire-fighting measures
5.1. Suitable extinguishing media
In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.
3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003 09/26/19
__________________________________________________________________________________________
Page 3 of 11
5.2. Special hazards arising from the substance or mixture
Closed containers exposed to heat from fire may build pressure and explode.
Hazardous Decomposition or By-Products
Substance ConditionCarbon monoxideDuring CombustionCarbon dioxideDuring Combustion
5.3. Special protective actions for fire-fighters
Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and
prevent explosive rupture. Wear full protective clothing, including helmet, self-contained, positive pressure or pressure
demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering
for exposed areas of the head.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or
exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and
could cause flammable gases or vapors in the spill area to burn or explode. Refer to other sections of this SDS for
information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.
6.2. Environmental precautions
Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or
bodies of water.
6.3. Methods and material for containment and cleaning up
Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially
available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent
material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible.
Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate
solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions
on the solvent label and SDS. Seal the container. Dispose of collected material as soon as possible in accordance with
applicable local/regional/national/international regulations.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Keep out of reach of children. Do not eat, drink or smoke when using this product. Wash thoroughly after handling.
Avoid release to the environment.
7.2. Conditions for safe storage including any incompatibilities
No special storage requirements.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational exposure limits
If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available
for the component.
IngredientC.A.S. No.AgencyLimit typeAdditional CommentsAluminum Oxide1344-28-1OSHATWA(as total dust):15
3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003 09/26/19
__________________________________________________________________________________________
Page 4 of 11
mg/m3;TWA(respirable
fraction):5 mg/m3
Aluminum, insoluble compounds1344-28-1ACGIHTWA(respirable fraction):1
mg/m3
A4: Not class. as human
carcin
Decamethylcyclopentasiloxane541-02-6AIHATWA:10 ppmGlycerin56-81-5OSHATWA(as total dust):15
mg/m3;TWA(respirable
fraction):5 mg/m3
MINERAL OILS, HIGHLY-
REFINED OILS
8042-47-5ACGIHTWA(inhalable fraction):5
mg/m3
A4: Not class. as human
carcin
Paraffin oil8042-47-5OSHATWA(as mist):5 mg/m3
ACGIH : American Conference of Governmental Industrial Hygienists
AIHA : American Industrial Hygiene Association
CMRG : Chemical Manufacturer's Recommended Guidelines
OSHA : United States Department of Labor - Occupational Safety and Health Administration
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
CEIL: Ceiling
8.2. Exposure controls
8.2.1. Engineering controls
No engineering controls required.
8.2.2. Personal protective equipment (PPE)
Eye/face protection
Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face
protection(s) are recommended:
Safety Glasses with side shields
Skin/hand protection
No chemical protective gloves are required.
Respiratory protection
None required.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
Physical state
Color
Liquid
White
OdorSlight SolventOdor thresholdNo Data AvailablepH8 - 8.3 Units not avail. or not appl.Melting pointNo Data AvailableBoiling Point>=95 FFlash Point>= 200 F [Test Method:Closed Cup]Evaporation rateNo Data AvailableFlammability (solid, gas)Not ApplicableFlammable Limits(LEL)No Data AvailableFlammable Limits(UEL)No Data Available
3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003 09/26/19
__________________________________________________________________________________________
Page 5 of 11
Vapor PressureNo Data AvailableVapor DensityNo Data AvailableDensity8.59 lb/galSpecific Gravity1.03 [Ref Std:WATER=1]Solubility in WaterSlight (less than 10%)Solubility- non-waterNo Data AvailablePartition coefficient: n-octanol/ waterNo Data AvailableAutoignition temperatureNo Data AvailableDecomposition temperatureNo Data AvailableViscosity12,000 – 18,000 centipoiseHazardous Air Pollutants0.00018 lb HAPS/lb solids [Test Method:Calculated]Molecular weightNot ApplicableVolatile Organic Compounds148 g/l [Test Method:calculated SCAQMD rule 443.1]Volatile Organic Compounds14.1 % weight [Test Method: calculated per CARB title 2]Percent volatile79.2 % weightVOC Less H2O & Exempt Solvents446 g/l [Test Method:calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material is considered to be non reactive under normal use conditions.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
None known.
10.5. Incompatible materials
None known.
10.6. Hazardous decomposition products
SubstanceCondition None known.
Refer to section 5.2 for hazardous decomposition products during combustion.
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.
11.1. Information on Toxicological effects
Signs and Symptoms of Exposure
3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003 09/26/19
__________________________________________________________________________________________
Page 6 of 11
Based on test data and/or information on the components, this material may produce the following health effects:
Inhalation:
No known health effects.
Skin Contact:
Contact with the skin during product use is not expected to result in significant irritation.
Eye Contact:
Contact with the eyes during product use is not expected to result in significant irritation.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.
Toxicological Data
If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or
the data are not sufficient for classification.
Acute Toxicity
NameRouteSpeciesValueOverall productInhalation-
Dust/Mist(4
hr)
No data available; calculated ATE >12.5 mg/lOverall productIngestionNo data available; calculated ATE >5,000 mg/kgHYDROTREATED HEAVY NAPHTHA (PETROLEUM)Inhalation-
Vapor
Professio
nal
judgeme
nt
LC50 estimated to be 20 – 50 mg/lHYDROTREATED HEAVY NAPHTHA (PETROLEUM)DermalRabbitLD50 > 5,000 mg/kgHYDROTREATED HEAVY NAPHTHA (PETROLEUM)IngestionRatLD50 > 5,000 mg/kgAluminum OxideDermalLD50 estimated to be > 5,000 mg/kgAluminum OxideInhalation-
Dust/Mist
(4 hours)
RatLC50 > 2.3 mg/lAluminum OxideIngestionRatLD50 > 5,000 mg/kgDISTILLATES (PETROLEUM), ACID TREATED, LIGHTInhalation-
Vapor
Professio
nal
judgeme
nt
LC50 estimated to be 20 – 50 mg/lDISTILLATES (PETROLEUM), ACID TREATED, LIGHTDermalRabbitLD50 > 5,000 mg/kgDISTILLATES (PETROLEUM), ACID TREATED, LIGHTIngestionRatLD50 > 5,000 mg/kgDecamethylcyclopentasiloxaneDermalRabbitLD50 > 15,000 mg/kgDecamethylcyclopentasiloxaneInhalation-
Dust/Mist
(4 hours)
RatLC50 8.7 mg/lDecamethylcyclopentasiloxaneIngestionRatLD50 > 24,134 mg/kgGlycerinDermalRabbitLD50 estimated to be > 5,000 mg/kgGlycerinIngestionRatLD50 > 5,000 mg/kgDodecamethylcyclohexasiloxaneDermalRatLD50 > 2,000 mg/kgDodecamethylcyclohexasiloxaneIngestionRatLD50 > 50,000 mg/kgWhite Mineral Oil (Petroleum)DermalRabbitLD50 > 2,000 mg/kgWhite Mineral Oil (Petroleum)IngestionRatLD50 > 5,000 mg/kg
ATE = acute toxicity estimate
Skin Corrosion/Irritation
NameSpeciesValueHYDROTREATED HEAVY NAPHTHA (PETROLEUM)RabbitMild irritantAluminum OxideRabbitNo significant irritationDISTILLATES (PETROLEUM), ACID TREATED, LIGHTRabbitMinimal irritationDecamethylcyclopentasiloxaneRabbitNo significant irritation
3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003 09/26/19
__________________________________________________________________________________________
Page 7 of 11
GlycerinRabbitNo significant irritationDodecamethylcyclohexasiloxaneRabbitNo significant irritationWhite Mineral Oil (Petroleum)RabbitNo significant irritation
Serious Eye Damage/Irritation
NameSpeciesValueHYDROTREATED HEAVY NAPHTHA (PETROLEUM)RabbitMild irritantAluminum OxideRabbitNo significant irritationDISTILLATES (PETROLEUM), ACID TREATED, LIGHTRabbitMild irritantDecamethylcyclopentasiloxaneRabbitNo significant irritationGlycerinRabbitNo significant irritationDodecamethylcyclohexasiloxaneRabbitNo significant irritationWhite Mineral Oil (Petroleum)RabbitMild irritant
Skin Sensitization
NameSpeciesValueHYDROTREATED HEAVY NAPHTHA (PETROLEUM)Guinea
pig
Not classifiedDISTILLATES (PETROLEUM), ACID TREATED, LIGHTGuinea
pig
Not classifiedDecamethylcyclopentasiloxaneMouseNot classifiedGlycerinGuinea
pig
Not classifiedWhite Mineral Oil (Petroleum)Guinea
pig
Not classified
Respiratory Sensitization
For the component/components, either no data are currently available or the data are not sufficient for classification.
Germ Cell Mutagenicity
NameRouteValueHYDROTREATED HEAVY NAPHTHA (PETROLEUM)In VitroNot mutagenicHYDROTREATED HEAVY NAPHTHA (PETROLEUM)In vivoNot mutagenicAluminum OxideIn VitroNot mutagenicDISTILLATES (PETROLEUM), ACID TREATED, LIGHTIn VitroNot mutagenicDISTILLATES (PETROLEUM), ACID TREATED, LIGHTIn vivoNot mutagenicDecamethylcyclopentasiloxaneIn VitroNot mutagenicDecamethylcyclopentasiloxaneIn vivoNot mutagenicWhite Mineral Oil (Petroleum)In VitroNot mutagenic
Carcinogenicity
NameRouteSpeciesValueHYDROTREATED HEAVY NAPHTHA (PETROLEUM)Not
Specified
Not
available
Not carcinogenicAluminum OxideInhalationRatNot carcinogenicDISTILLATES (PETROLEUM), ACID TREATED, LIGHTNot
Specified
Not
available
Not carcinogenicDecamethylcyclopentasiloxaneInhalationRatSome positive data exist, but the data are not
sufficient for classification
GlycerinIngestionMouseSome positive data exist, but the data are not
sufficient for classification
White Mineral Oil (Petroleum)DermalMouseNot carcinogenicWhite Mineral Oil (Petroleum)InhalationMultiple
animal
species
Not carcinogenic
Reproductive Toxicity
Reproductive and/or Developmental Effects
NameRouteValueSpeciesTest Result Exposure
3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003 09/26/19
__________________________________________________________________________________________
Page 8 of 11
DurationHYDROTREATED HEAVY NAPHTHA
(PETROLEUM)
Not
Specified
Not classified for female reproductionRatNOAEL Not
available
premating &
during
gestation
HYDROTREATED HEAVY NAPHTHA
(PETROLEUM)
Not
Specified
Not classified for male reproductionRatNOAEL Not
available
28 daysHYDROTREATED HEAVY NAPHTHA
(PETROLEUM)
Not
Specified
Not classified for developmentRatNOAEL Not
available
during
gestation
DISTILLATES (PETROLEUM), ACID
TREATED, LIGHT
Not
Specified
Not classified for female reproductionRatNOAEL Not
available
1 generationDISTILLATES (PETROLEUM), ACID
TREATED, LIGHT
Not
Specified
Not classified for male reproductionRatNOAEL Not
available
1 generationDISTILLATES (PETROLEUM), ACID
TREATED, LIGHT
Not
Specified
Not classified for developmentRatNOAEL Not
available
1 generationDecamethylcyclopentasiloxaneInhalationNot classified for female reproductionRatNOAEL 2.43
mg/l
2 generationDecamethylcyclopentasiloxaneInhalationNot classified for male reproductionRatNOAEL 2.43
mg/l
2 generationDecamethylcyclopentasiloxaneInhalationNot classified for developmentRatNOAEL 2.43
mg/l
2 generationGlycerinIngestionNot classified for female reproductionRatNOAEL 2,000
mg/kg/day
2 generationGlycerinIngestionNot classified for male reproductionRatNOAEL 2,000
mg/kg/day
2 generationGlycerinIngestionNot classified for developmentRatNOAEL 2,000
mg/kg/day
2 generationDodecamethylcyclohexasiloxaneIngestionNot classified for female reproductionRatNOAEL 1,000
mg/kg/day
premating &
during
gestation
DodecamethylcyclohexasiloxaneIngestionNot classified for male reproductionRatNOAEL 1,000
mg/kg/day
28 daysDodecamethylcyclohexasiloxaneIngestionNot classified for developmentRatNOAEL 1,000
mg/kg/day
premating &
during
gestation
White Mineral Oil (Petroleum)IngestionNot classified for female reproductionRatNOAEL 4,350
mg/kg/day
13 weeksWhite Mineral Oil (Petroleum)IngestionNot classified for male reproductionRatNOAEL 4,350
mg/kg/day
13 weeksWhite Mineral Oil (Petroleum)IngestionNot classified for developmentRatNOAEL 4,350
mg/kg/day
during
gestation
Target Organ(s)
Specific Target Organ Toxicity – single exposure
For the component/components, either no data are currently available or the data are not sufficient for classification.
Specific Target Organ Toxicity – repeated exposure
NameRouteTarget Organ(s)ValueSpeciesTest Result Exposure
Duration
Aluminum OxideInhalationpneumoconiosisSome positive data exist, but the
data are not sufficient for
classification
HumanNOAEL Not
available
occupational
exposure
Aluminum OxideInhalationpulmonary fibrosisNot classifiedHumanNOAEL Not
available
occupational
exposure
Decamethylcyclopentasilo
xane
Dermalhematopoietic
system | eyes
Not classifiedRatNOAEL
1,600
mg/kg/day
28 daysDecamethylcyclopentasilo
xane
Inhalationhematopoietic
system | respiratory
system | liver | eyes |
kidney and/or
bladder
Not classifiedRatNOAEL 2.42
mg/l
2 yearsDecamethylcyclopentasilo
xane
Ingestionliver | immune
system | respiratory
system | heart |
Not classifiedRatNOAEL
1,000
mg/kg/day
90 days
3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003 09/26/19
__________________________________________________________________________________________
Page 9 of 11
hematopoietic
system | kidney
and/or bladder
GlycerinInhalationrespiratory system |
heart | liver | kidney
and/or bladder
Not classifiedRatNOAEL 3.91
mg/l
14 daysGlycerinIngestionendocrine system |
hematopoietic
system | liver |
kidney and/or
bladder
Not classifiedRatNOAEL
10,000
mg/kg/day
2 yearsDodecamethylcyclohexasil
oxane
Ingestionendocrine system |
liver | respiratory
system | nervous
system
Not classifiedRatNOAEL
1,000
mg/kg/day
28 daysWhite Mineral Oil
(Petroleum)
Ingestionhematopoietic
system
Not classifiedRatNOAEL
1,381
mg/kg/day
90 daysWhite Mineral Oil
(Petroleum)
Ingestionliver | immune
system
Not classifiedRatNOAEL
1,336
mg/kg/day
90 days
Aspiration Hazard
NameValueHYDROTREATED HEAVY NAPHTHA (PETROLEUM)Aspiration hazardDISTILLATES (PETROLEUM), ACID TREATED, LIGHTAspiration hazardWhite Mineral Oil (Petroleum)Aspiration hazard
Please contact the address or phone number listed on the first page of the SDS for additional toxicological information
on this material and/or its components.
SECTION 12: Ecological information
Ecotoxicological information
Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material
and/or its components.
Chemical fate information
Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material
and/or its components.
SECTION 13: Disposal considerations
13.1. Disposal methods
Dispose of contents/ container in accordance with the local/regional/national/international regulations.
Incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during
incineration processes. As a disposal alternative, utilize an acceptable permitted waste disposal facility. Empty
drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations
classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes
unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the
available treatment and disposal facilities.
SECTION 14: Transport Information
For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501.
3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003 09/26/19
__________________________________________________________________________________________
Page 10 of 11
SECTION 15: Regulatory information
15.1. US Federal Regulations
Contact 3M for more information.
EPCRA 311/312 Hazard Classifications:
Physical HazardsNot applicableHealth HazardsNot applicable
Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA):
IngredientC.A.S. No% by WtAluminum Oxide 1344-28-1 Trade Secret 5 – 10Aluminum Oxide (ALUMINUM OXIDE (FIBROUS
FORMS ONLY))
1344-28-1 5 – 10
15.2. State Regulations
Contact 3M for more information.
15.3. Chemical Inventories
The components of this product are in compliance with the chemical notification requirements of TSCA. All required
components of this product are listed on the active portion of the TSCA Inventory.
Contact 3M for more information.
15.4. International Regulations
Contact 3M for more information.
This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: Other information
NFPA Hazard Classification
Health: 0 Flammability: 1 Instability: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address
the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar
emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include
the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.
Document Group:32-6438-9Version Number:2.01Issue Date:09/26/19Supercedes Date:01/28/16
DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued.3MMAKES
NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR
USAGE OF TRADE.User is responsible for determining whether the3Mproduct is fit for a particular purpose and suitable for
3M Finesse-It II Machine Polish PN 05928, 05929, 05932, 39003 09/26/19
__________________________________________________________________________________________
Page 11 of 11
user’s method of use or application.Given the variety of factors that can affect the use and application of a3Mproduct, some of
which are uniquely within the user’s knowledge and control,it is essential that the user evaluate the3Mproduct to determine
whether it is fit for a particular purpose and suitable for user’s method of use or application.
3Mprovides information in electronic form as a service to its customers. Due to the remote possibility that electronic
transfer may have resulted in errors, omissions or alterations in this information,3Mmakes no representations as to its
completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the
SDS available directly from3M
3M USA SDSs are available at www.3M.com