804-038-UN-1866mixture_SDS.pdf

NPG Fast Putty
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
03/24/2021EN (English)Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixtureTrade name :NPG Fast PuttyCAS-No. :mixtureProduct code :804-038Formula :na
1.2. Recommended use and restrictions on use
Use of the substance/mixture :BONDING PUTTY
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids,
Category 3
H226 Flammable liquid and vapour.Skin corrosion/irritation,
Category 2
H315 Causes skin irritation.Serious eye damage/eye
irritation, Category 2
H319 Causes serious eye irritation.Skin sensitisation,
Category 1
H317 May cause an allergic skin reaction.Reproductive toxicity,
Category 2
H361 Suspected of damaging fertility or the unborn child.Specific target organ
toxicity Single exposure,
Category 3, Respiratory
tract irritation
H335 May cause respiratory irritation.Specific target organ
toxicity Repeated
exposure, Category 1
H372 Causes damage to organs through prolonged or repeated exposure.Hazardous to the aquatic
environment Acute
Hazard, Category 2
H401 Toxic to aquatic life
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labelling
Hazard pictograms (GHS US) :Signal word (GHS US) :DangerHazard statements (GHS US) :H226 – Flammable liquid and vapour.
H315 – Causes skin irritation.

NPG Fast Putty
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
03/24/2021EN (English)2/11 H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H335 – May cause respiratory irritation.
H361 – Suspected of damaging fertility or the unborn child.
H372 – Causes damage to organs through prolonged or repeated exposure.
H401 – Toxic to aquatic life
Precautionary statements (GHS US) :P201 – Obtain special instructions before use.
P202 – Do not handle until all safety precautions have been read and understood.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P233 – Keep container tightly closed.
P240 – Ground/Bond container and receiving equipment.
P241 – Use explosion-proof electrical, lighting, ventilating equipment.
P242 – Use only non-sparking tools.
P243 – Take precautionary measures against static discharge.
P260 – Do not breathe dust, fume, mist, spray, vapours.
P261 – Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 – Wash EXPOSED AREA. thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water.
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower.
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P308+P313 – If exposed or concerned: Get medical advice/attention.
P312 – Call a poison center or doctor if you feel unwell.
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see SEEK MEDICAL AID. on this label).
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish.
P403+P233 – Store in a well-ventilated place. Keep container tightly closed.
P403+P235 – Store in a well-ventilated place. Keep cool.
P405 – Store locked up.
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS..
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%GHS-US classificationUnsaturated Polyester Resin(CAS-No.) TRADE SECRET<= 60Not classifiedstyrene, inhibited(CAS-No.) 100-42-5<= 32Flam. Liq. 3, H226 Acute Tox. 4 (Inhalation), H332 Acute Tox. 4 (Inhalation:vapour), H332 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Carc. 2, H351 Repr. 2, H361 STOT SE 3, H335 STOT RE 1, H372 Aquatic Acute 2, H401 silicon dioxide, amorphous(CAS-No.) 7631-86-9<= 10Not classified NPG Fast Putty Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 03/24/2021EN (English)3/11 Name Product identifier % GHS-US classificationcobalt(II) 2-ethylhexanoate(CAS-No.) 136-52-7<= 0.5Eye Irrit. 2, H319 Skin Sens. 1, H317 Carc. 2, H351 Aquatic Acute 1, H400 Aquatic Chronic 2, H411 Full text of hazard classes and H-statements : see section 16 SECTION 4: First-aid measures 4.1. Description of first aid measures First-aid measures general :Never give anything by mouth to an unconscious person. IF exposed or concerned: Get medical advice/attention. First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing. Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. First-aid measures after skin contact :Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash with plenty of water/ . Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention. Specific treatment (see supplemental first aid instruction on this label). First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison center or a doctor if you feel unwell. 4.2. Most important symptoms and effects (acute and delayed) Potential adverse human health effects and symptoms :Harmful if inhaled. Based on available data, the classification criteria are not met.Symptoms/effects :May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to organs through prolonged or repeated exposure. Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if inhaled. May cause respiratory irritation. Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation. 4.3. Immediate medical attention and special treatment, if necessary Treat symptomatically. SECTION 5: Fire-fighting measures 5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media :Sand. Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream. 5.2. Specific hazards arising from the chemical Fire hazard :Highly flammable liquid and vapour. Flammable liquid and vapour.Explosion hazard :May form flammable/explosive vapour-air mixture.Reactivity in case of fire :No reactivity hazard other than the effects described in sub-sections below. 5.3. Special protective equipment and precautions for fire-fighters Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment. Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection. Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures :Remove ignition sources. Use special care to avoid static electric charges. No open flames. No smoking. 6.1.1.For non-emergency personnel Protective equipment :Gloves. Protective goggles. Protective clothing.Emergency procedures :Ventilate spillage area. Evacuate unnecessary personnel. NPG Fast Putty Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 03/24/2021EN (English)4/11 6.1.2.For emergency responders Protective equipment :Do not attempt to take action without suitable protective equipment. Equip cleanup crew with proper protection. For further information refer to section 8: "Exposure controls/personal protection". Emergency procedures :Ventilate area. 6.2. Environmental precautions Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. 6.3. Methods and material for containment and cleaning up For containment :Dam up the liquid spill. Contain released product, pump into suitable containers.Methods for cleaning up :Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. Other information :Dispose of materials or solid residues at an authorized site. 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. For further information refer to section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling Additional hazards when processed :Handle empty containers with care because residual vapours are flammable.Precautions for safe handling :Wear personal protective equipment. Use only outdoors or in a well-ventilated area. Avoid breathing DUST, FUMES, MIST, OR VAPORS. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Eliminate all ignition sources if safe to do so. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. No open flames. No smoking. Take precautionary measures against static discharge. Use only non-sparking tools. Do not breathe dust/fume/gas/mist/vapours/spray. Hygiene measures :Wash hands, forearms and face thoroughly after handling. Do not eat, drink or smoke when using this product. Always wash hands after handling the product. 7.2. Conditions for safe storage, including any incompatibilities Technical measures :Proper grounding procedures to avoid static electricity should be followed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Storage conditions :Keep in fireproof place. Keep only in the original container in a cool, well ventilated place away from : Keep container tightly closed. Store in a well-ventilated place. Keep cool. Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight. Heat sources. SECTION 8: Exposure controls/personal protection 8.1. Control parameters styrene, inhibited (100-42-5)ACGIHACGIH TWA (ppm)20 ppmACGIHACGIH STEL (ppm)40 ppmcobalt(II) 2-ethylhexanoate (136-52-7)Not applicable Unsaturated Polyester Resin (TRADE SECRET)Not applicable silicon dioxide, amorphous (7631-86-9)Not applicable 8.2. Appropriate engineering controls Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available). Ensure good ventilation of the work station. Environmental exposure controls :Avoid release to the environment. NPG Fast Putty Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 03/24/2021EN (English)5/11 8.3. Individual protection measures/Personal protective equipment Personal protective equipment:Avoid all unnecessary exposure. Hand protection:Wear protective gloves.Eye protection:Chemical goggles or safety glasses. Safety glassesSkin and body protection:Wear suitable protective clothing Respiratory protection:Wear appropriate mask Other information:Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state :Liquid Colour :Colourless to yellow Odour :characteristic Odour threshold :No data available pH :No data available Melting point :Not applicable Freezing point :No data available Boiling point : 146.1 C Flash point :32.2 - 34 C Relative evaporation rate (butylacetate=1) :No data available Flammability (solid, gas) :Highly flammable liquid and vapour. Flammable liquid and vapour. Vapour pressure :No data available Relative vapour density at 20 C :No data available Relative density : 1.43 Solubility :No data available Log Pow :No data available Auto-ignition temperature :No data available Decomposition temperature :No data available Viscosity, kinematic :No data availableViscosity, dynamic :No data available Explosive limits :No data available Explosive properties :No data available Oxidising properties :No data available 9.2. Other information VOC content :<= 317 g/l SECTION 10: Stability and reactivity 10.1.Reactivity No reactivity hazard other than the effects described in sub-sections below. 10.2.Chemical stability Polymerization can result in formation of solid deposits, even in vapour space. Highly flammable liquid and vapour. Not established. Flammable liquid and vapour. May form flammable/explosive vapour-air mixture. NPG Fast Putty Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 03/24/2021EN (English)6/11 10.3.Possibility of hazardous reactions Not established. 10.4.Conditions to avoid Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks. 10.5.Incompatible materials Strong acids. Strong bases. 10.6.Hazardous decomposition products fume. Carbon monoxide. Carbon dioxide. May release flammable gases. SECTION 11: Toxicological information 11.1.Information on toxicological effects Acute toxicity (oral) :Not classifiedAcute toxicity (dermal) :Not classifiedAcute toxicity (inhalation) :Not classifiedstyrene, inhibited (100-42-5)LD50 oral rat5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)LD50 dermal rat> 2000 mg/kg bodyweight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal)
LD50 dermal rabbit5010 mg/kg (Rabbit; Literature study)LC50 Inhalation – Rat11.8 mg/l air (4 h, Rat, Inconclusive, insufficient data, Inhalation (vapours))LC50 Inhalation – Rat [ppm]2770 ppm/4h (Rat; Literature study)ATE US (oral)5000 mg/kg bodyweightATE US (dermal)5010 mg/kg bodyweightATE US (gases)2770 ppmv/4hATE US (vapours)11 mg/l/4hATE US (dust,mist)1.5 mg/l/4hcobalt(II) 2-ethylhexanoate (136-52-7)LD50 oral rat3129 mg/kg bodyweight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat> 2000 mg/kg bodyweight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)ATE US (oral)3129 mg/kg bodyweightsilicon dioxide, amorphous (7631-86-9)LD50 oral rat> 10000 mg/kg (Rat, Oral)LD50 dermal rabbit> 5000 mg/kg (Rabbit, Dermal)Skin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Causes serious eye irritation.Respiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Not classified.styrene, inhibited (100-42-5)IARC group2B – Possibly carcinogenic to humansNational Toxicology Program (NTP) StatusReasonably anticipated to be Human Carcinogencobalt(II) 2-ethylhexanoate (136-52-7)IARC group2B – Possibly carcinogenic to humansReproductive toxicity :Suspected of damaging fertility or the unborn child.STOT-single exposure :May cause respiratory irritation.styrene, inhibited (100-42-5)STOT-single exposureMay cause respiratory irritation.STOT-repeated exposure :Causes damage to organs through prolonged or repeated exposure.

NPG Fast Putty
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
03/24/2021EN (English)7/11styrene, inhibited (100-42-5)STOT-repeated exposureCauses damage to organs through prolonged or repeated exposure.Aspiration hazard :Not classifiedViscosity, kinematic :No data availablePotential adverse human health effects and
symptoms
:Harmful if inhaled. Based on available data, the classification criteria are not met.Symptoms/effects :May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to
organs through prolonged or repeated exposure.
Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
Ecology – general :The product is not considered harmful to aquatic organisms nor to cause long-term adverse
effects in the environment.
styrene, inhibited (100-42-5)LC50 fish 110 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Flow-through
system, Fresh water, Experimental value, GLP)
EC50 Daphnia 14.7 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Flow-
through system, Fresh water, Experimental value, GLP)
ErC50 (algae)4.9 mg/l (EPA OTS 797.1050, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, GLP)
cobalt(II) 2-ethylhexanoate (136-52-7)LC50 fish 146.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 10.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)LC50 fish 254.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 20.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)Threshold limit algae 1144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 232.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
silicon dioxide, amorphous (7631-86-9)LC50 fish 1> 10000 mg/l (96 h, Brachydanio rerio, Literature)EC50 Daphnia 1> 10000 mg/l (24 h, Daphnia magna, Literature)
12.2.Persistence and degradability
NPG Fast Putty (mixture)Persistence and degradabilityNot established.styrene, inhibited (100-42-5)Persistence and degradabilityBiodegradable in the soil. Readily biodegradable in water.Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD)0.42 (Literature study)cobalt(II) 2-ethylhexanoate (136-52-7)Persistence and degradabilityReadily biodegradable in water. No (test)data on mobility of the substance available.Unsaturated Polyester Resin (TRADE SECRET)Persistence and degradabilityNot established.silicon dioxide, amorphous (7631-86-9)Persistence and degradabilityBiodegradability in soil: not applicable. Biodegradability: not applicable.

NPG Fast Putty
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
03/24/2021EN (English)8/11
silicon dioxide, amorphous (7631-86-9)
Chemical oxygen demand (COD)
Not applicable (inorganic)
ThOD
Not applicable (inorganic)
12.3.Bioaccumulative potential
NPG Fast Putty (mixture)Bioaccumulative potentialNot established.styrene, inhibited (100-42-5)BCF fish 135.5 (Carassius auratus, Literature study)Log Pow2.96 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 25 C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4).cobalt(II) 2-ethylhexanoate (136-52-7)BCF fish 11.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500).Unsaturated Polyester Resin (TRADE SECRET)Bioaccumulative potentialNot established.silicon dioxide, amorphous (7631-86-9)Bioaccumulative potentialNot bioaccumulative. 12.4.Mobility in soil styrene, inhibited (100-42-5)Surface tension0.032 N/m (20 C)Log Koc2.55 (log Koc, Estimated value)Ecology - soilLow potential for adsorption in soil.cobalt(II) 2-ethylhexanoate (136-52-7)Surface tension0.064 N/m (20 C; 1 g/l)silicon dioxide, amorphous (7631-86-9)Ecology - soilNo (test)data on mobility of the substance available. 12.5.Other adverse effects Other information :Avoid release to the environment. SECTION 13: Disposal considerations 13.1.Disposal methods Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Additional information :Handle empty containers with care because residual vapours are flammable.Ecology - waste materials :Avoid release to the environment. SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOTProper Shipping Name (DOT) :RESIN SOLUTION Class (DOT) :3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120 Packing group (DOT) :II - Medium Danger NPG Fast Putty Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 03/24/2021EN (English)9/11Hazard labels (DOT) :3 - Flammable liquid Other information :No supplementary information available. Transportation of Dangerous GoodsTransport by sea Transport document description (IMDG) :UN 1866 RESIN SOLUTION, 3, IIIUN-No. (IMDG) :1866Proper Shipping Name (IMDG) :RESIN SOLUTIONClass (IMDG) :3 - Flammable liquidsPacking group (IMDG) :III - substances presenting low danger Air transport Transport document description (IATA) :UN 1866 RESIN SOLUTION, 3, IIIUN-No. (IATA) :1866Proper Shipping Name (IATA) :RESIN SOLUTIONClass (IATA) :3 - Flammable LiquidsPacking group (IATA) :III - Minor Danger SECTION 15: Regulatory information 15.1. US Federal regulations styrene, inhibited (100-42-5)Listed on the United States TSCA (Toxic Substances Control Act) inventory Subject to reporting requirements of United States SARA Section 313 Listed on EPA Hazardous Air Pollutant (HAPS) CERCLA RQ1000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard Reactive hazard - No Fire hazard Delayed (chronic) health hazard cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the United States TSCA (Toxic Substances Control Act) inventory 15.2. International regulations CANADA styrene, inhibited (100-42-5)Listed on the Canadian DSL (Domestic Substances List)cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the Canadian DSL (Domestic Substances List)Unsaturated Polyester Resin (TRADE SECRET)Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List) EU-Regulations No additional information available National regulations styrene, inhibited (100-42-5)Listed on IARC (International Agency for Research on Cancer) Listed as carcinogen on NTP (National Toxicology Program) NPG Fast Putty Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 03/24/2021EN (English)10/11 15.3. US State regulations styrene, inhibited (100-42-5)U.S. - California - Proposition 65 - Carcinogens List U.S. - California - Proposition 65 - Developmental Toxicity U.S. - California - Proposition 65 - Reproductive Toxicity - Female U.S. - California - Proposition 65 - Reproductive Toxicity - Male No significant risk level (NSRL) Maximum allowable dose level (MADL) YesNoNoNo27 g/dayComponentState or local regulationsstyrene, inhibited(100-42-5)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List SECTION 16: Other information according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Other information :None. Full text of H-statements:H226Flammable liquid and vapour.H315Causes skin irritation.H317May cause an allergic skin reaction.H319Causes serious eye irritation.H332Harmful if inhaled.H335May cause respiratory irritation.H351Suspected of causing cancer.H361Suspected of damaging fertility or the unborn child.H372Causes damage to organs through prolonged or repeated exposure.H400Very toxic to aquatic life.H401Toxic to aquatic lifeH411Toxic to aquatic life with long lasting effects. NFPA health hazard :2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. NFPA fire hazard :3 - Liquids and solids (including finely divided suspended solids) that can be ignited under almost all ambient temperature conditions. NFPA reactivity :2 - Materials that readily undergo violent chemical change at elevated temperatures and pressures. Hazard RatingHealth :2 Moderate Hazard - Temporary or minor injury may occurFlammability :3 Serious Hazard - Materials capable of ignition under almost all normal temperature conditions. Includes flammable liquids with flash points below 73 F and boiling points above 100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC) Physical :1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high temperatures and pressures. Materials may react non-violently with water or undergo hazardous polymerization in the absence of inhibitors. :HPersonal protection H - Splash goggles, Gloves, Synthetic apron, Vapor respirator SDS US (GHS HazCom 2012) NPG Fast Putty Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 03/24/2021EN (English)11/11 To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.