80F026011_SDS.pdf

Page 1/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 08/19/2016
47.0
1 Identification
Product identifier
Trade name:TCC-6072 PART A ISO
Article number:I024707-2
Application of the substance / the mixturePolyurethane resin
Details of the supplier of the safety data sheetSikaAxson US – EHS Department
Manufacturer/Supplier:
Company Name: Axson Technologies US, Inc.-SikaAxson
Headquarters:
31200 Stephenson Hwy
Madison Heights, MI 48071
USA
Manufacturing Site:
1611 Hults Drive
Eaton Rapids, MI 48827
USA
ehs-us@axson.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
2 Hazard(s) identification
Classification of the substance or mixture

GHS08 Health hazard
Resp. Sens. 1H334May cause allergy or asthma symptoms or breathing difficulties if inhaled.
STOT RE 2H373May cause damage to organs through prolonged or repeated exposure.

GHS07
Acute Tox. 4H332Harmful if inhaled.
Skin Irrit. 2H315Causes skin irritation.
Eye Irrit. 2AH319Causes serious eye irritation.
Skin Sens. 1H317May cause an allergic skin reaction.
STOT SE 3H335May cause respiratory irritation.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2)
US

Page 2/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 08/19/2016
Trade name:TCC-6072 PART A ISO
(Contd. of page 1)
47.0
Hazard pictograms

GHS07

GHS08
Signal wordDanger
Hazard-determining components of labeling:
4,4′-methylenediphenyl diisocyanate
methylenediphenyl diisocyanate
Homopolymer of methylenediphenyl diisocyanate
Hazard statements
Harmful if inhaled.
Causes skin irritation.
Causes serious eye irritation.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
May cause an allergic skin reaction.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves / eye protection / face protection.
[In case of inadequate ventilation] wear respiratory protection.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Call a poison center/doctor if you feel unwell.
If experiencing respiratory symptoms: Call a poison center/doctor.
Wash contaminated clothing before reuse.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
2
0
0
Health = 2
Fire = 0
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
*2
0
0
Health = *2
Fire = 0
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
(Contd. on page 3)
US

Page 3/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 08/19/2016
Trade name:TCC-6072 PART A ISO
(Contd. of page 2)
47.0
vPvB:Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
CAS: 101-68-8
EINECS: 202-966-0
4,4′-methylenediphenyl diisocyanate 20-50%
CAS: 26447-40-5
EINECS: 247-714-0
methylenediphenyl diisocyanate 5-<10% CAS: 25686-28-6Homopolymer of methylenediphenyl diisocyanate 0.1-<1% 4 First-aid measures Description of first aid measures General information: Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. After inhalation: Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation. After skin contact:Immediately wash with water and soap and rinse thoroughly. After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. After swallowing:If symptoms persist consult doctor. Information for doctor: Most important symptoms and effects, both acute and delayedNo further relevant information available. Indication of any immediate medical attention and special treatment needed No further relevant information available. 5 Fire-fighting measures Extinguishing media Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray. Use fire fighting measures that suit the environment. Special hazards arising from the substance or mixture Nitrogen oxides (NOx) Hydrogen cyanide (HCN) Advice for firefighters Protective equipment: Mouth respiratory protective device. Wear self-contained respiratory protective device. (Contd. on page 4) US Page 4/11 Safety Data Sheet acc. to OSHA HCS Printing date 05/23/2018 Reviewed on 08/19/2016 Trade name:TCC-6072 PART A ISO (Contd. of page 3) 47.0 Additional information Dispose of fire debris and contaminated fire fighting water in accordance with official regulations. 6 Accidental release measures Personal precautions, protective equipment and emergency proceduresNot required. Environmental precautions:Do not allow to enter sewers/ surface or ground water. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation. Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. Protective Action Criteria for Chemicals PAC-1: 101-68-84,4'-methylenediphenyl diisocyanate 0.45 mg/m 26447-40-5methylenediphenyl diisocyanate 29 mg/m 78-83-1butanol 150 ppm 98-88-4benzoyl chloride 0.3 ppm 98-82-8cumene 50 ppm 1330-20-7xylene 130 ppm 100-41-4ethylbenzene 33 ppm PAC-2: 101-68-84,4'-methylenediphenyl diisocyanate 5 mg/m 26447-40-5methylenediphenyl diisocyanate 40 mg/m 78-83-1butanol 1,300 ppm 98-88-4benzoyl chloride 5 ppm 98-82-8cumene 300 ppm 1330-20-7xylene 920* ppm 100-41-4ethylbenzene 1100* ppm PAC-3: 101-68-84,4'-methylenediphenyl diisocyanate 55 mg/m 26447-40-5methylenediphenyl diisocyanate 240 mg/m 78-83-1butanol 8000* ppm 98-88-4benzoyl chloride 20 ppm 98-82-8cumene 730 ppm 1330-20-7xylene 2500* ppm 100-41-4ethylbenzene 1800* ppm US (Contd. on page 5) Page 5/11 Safety Data Sheet acc. to OSHA HCS Printing date 05/23/2018 Reviewed on 08/19/2016 Trade name:TCC-6072 PART A ISO (Contd. of page 4) 47.0 7 Handling and storage Handling: Precautions for safe handlingEnsure good ventilation/exhaustion at the workplace. Information about protection against explosions and fires:No special measures required. Conditions for safe storage, including any incompatibilities Storage: Requirements to be met by storerooms and receptacles:No special requirements. Information about storage in one common storage facility:Not required. Further information about storage conditions:Keep receptacle tightly sealed. Specific end use(s)No further relevant information available. 8 Exposure controls/personal protection Additional information about design of technical systems:No further data; see item 7. Control parameters Components with limit values that require monitoring at the workplace: The following constituent is the only constituent of the product which has a PEL, TLV or other recommended exposure limit. At this time, the other constituents have no known exposure limits. 101-68-84,4'-methylenediphenyl diisocyanate PELCeiling limit value: 0.2 mg/m , 0.02 ppm RELLong-term value: 0.05 mg/m , 0.005 ppm Ceiling limit value: 0.2* mg/m , 0.02* ppm *10-min TLVLong-term value: 0.051 mg/m , 0.005 ppm Additional information:The lists that were valid during the creation were used as basis. Exposure controls Personal protective equipment: General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work. Store protective clothing separately. Avoid contact with the eyes and skin. Breathing equipment: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air. Protection of hands: Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation (Contd. on page 6) US Page 6/11 Safety Data Sheet acc. to OSHA HCS Printing date 05/23/2018 Reviewed on 08/19/2016 Trade name:TCC-6072 PART A ISO (Contd. of page 5) 47.0 Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Eye protection: Tightly sealed goggles 9 Physical and chemical properties Information on basic physical and chemical properties General Information Appearance: Form: Liquid Color: Amber colored Odor: Characteristic Odor threshold: Not determined. pH-value: Not determined. Change in condition Melting point/Melting range: Undetermined. Boiling point/Boiling range: 208 C (406.4 F) Flash point: Not applicable. Flammability (solid, gaseous): Not applicable. Ignition temperature: 520 C (968 F) Decomposition temperature: Not determined. Auto igniting: Product is not selfigniting. Danger of explosion: Product does not present an explosion hazard. Explosion limits: Lower: 0.4 Vol % Upper: 0.0 Vol % Vapor pressure at 20 C (68 F): 0.1 hPa (0.1 mm Hg) Density at 20 C (68 F): 1.17 g/cm (9.76 lbs/gal) Relative density Not determined. Vapor density Not determined. Evaporation rate Not determined. Solubility in / Miscibility with Water: Not miscible or difficult to mix. (Contd. on page 7) US Page 7/11 Safety Data Sheet acc. to OSHA HCS Printing date 05/23/2018 Reviewed on 08/19/2016 Trade name:TCC-6072 PART A ISO (Contd. of page 6) 47.0 Partition coefficient (n-octanol/water):Not determined. Viscosity: Dynamic: Not determined. Kinematic: Not determined. Solvent content: Organic solvents: 0.4 % VOC content: 0.40 % 4.7 g/l / 0.04 lb/gl Solids content: 27.1 % Other information No further relevant information available. 10Stability and reactivity ReactivityNo further relevant information available. Chemical stability Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications. Possibility of hazardous reactions Violent reactions with -NHx, -OH and -SH- groups. In the presence of water or humidity gas (CO2) is porduced and/or uncontrolled polymerization, possibly leading to internal pressure rises and consequent risk of container breach. Conditions to avoidNo further relevant information available. Incompatible materials:No further relevant information available. Hazardous decomposition products: ? Nitrogen oxides Carbon monoxide and carbon dioxide (possible HCN) 11Toxicological information Information on toxicological effects Acute toxicity: LD/LC50 values that are relevant for classification: 101-68-84,4'-methylenediphenyl diisocyanate Oral LD502,200 mg/kg (mouse) DermalLD50>9,400 mg/kg (rabbit)
InhalativeLC50/4 h2 mg/l (rat)
Primary irritant effect:
on the skin:Irritant to skin and mucous membranes.
on the eye:Irritating effect.
Sensitization:
Sensitization possible through inhalation.
Sensitization possible through skin contact.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
(Contd. on page 8)
US

Page 8/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 08/19/2016
Trade name:TCC-6072 PART A ISO
(Contd. of page 7)
47.0
Harmful
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
101-68-84,4′-methylenediphenyl diisocyanate 3
98-88-4benzoyl chloride 2A
98-82-8cumene 2B
1330-20-7xylene 3
100-41-4ethylbenzene 2B
NTP (National Toxicology Program)
98-82-8cumene R
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Additional ecological information:
General notes:
Water hazard class 2 (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
13Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
US
(Contd. on page 9)

Page 9/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 08/19/2016
Trade name:TCC-6072 PART A ISO
(Contd. of page 8)
47.0
14Transport information
UN-Number
DOT, ADN, IMDG, IATA not regulated
UN proper shipping name
DOT, ADN, IMDG, IATA not regulated
Transport hazard class(es)
DOT, ADN, IMDG, IATA
Class not regulated
Packing group
DOT, IMDG, IATA not regulated
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN “Model Regulation”: not regulated
15Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
101-68-84,4′-methylenediphenyl diisocyanate
TSCA (Toxic Substances Control Act) (Substances not listed):
All ingredients are listed.
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
Proposition 65
Chemicals known to cause cancer:
98-82-8cumene
100-41-4ethylbenzene
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
(Contd. on page 10)
US

Page 10/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 08/19/2016
Trade name:TCC-6072 PART A ISO
(Contd. of page 9)
47.0
Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
101-68-84,4′-methylenediphenyl diisocyanate D, CBD
98-82-8cumene D, CBD
1330-20-7xylene I
100-41-4ethylbenzene D
TLV (Threshold Limit Value established by ACGIH)
98-88-4benzoyl chloride A4
1330-20-7xylene A4
100-41-4ethylbenzene A3
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms

GHS07

Page 11/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 08/19/2016
Trade name:TCC-6072 PART A ISO
(Contd. of page 10)
47.0
Wash contaminated clothing before reuse.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision05/23/2018 / 6
Abbreviations and acronyms:
ADR: Accord europ en sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Acute Tox. 4: Acute toxicity Category 4
Skin Irrit. 2: Skin corrosion/irritation Category 2
Eye Irrit. 2A: Serious eye damage/eye irritation Category 2A
Resp. Sens. 1: Respiratory sensitisation Category 1
Skin Sens. 1: Skin sensitisation Category 1
STOT SE 3: Specific target organ toxicity (single exposure) Category 3
STOT RE 2: Specific target organ toxicity (repeated exposure) Category 2
US

Page 1/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 07/29/2016
47.0
1 Identification
Product identifier
Trade name:TCC-6072 PART B POLYOL
Article number:I025826-1
Application of the substance / the mixturePolyurethane resin
Details of the supplier of the safety data sheetSikaAxson US – EHS Department
Manufacturer/Supplier:
Company Name: Axson Technologies US, Inc.-SikaAxson
Headquarters:
31200 Stephenson Hwy
Madison Heights, MI 48071
USA
Manufacturing Site:
1611 Hults Drive
Eaton Rapids, MI 48827
USA
ehs-us@axson.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
2 Hazard(s) identification
Classification of the substance or mixture
The product is not classified, according to the Globally Harmonized System (GHS).
Label elements
GHS label elementsVoid
Hazard pictogramsVoid
Signal wordVoid
Hazard statementsVoid
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid breathing dust/fume/gas/mist/vapors/spray
Wear protective gloves/protective clothing/eye protection/face protection.
In case of inadequate ventilation wear respiratory protection.
Classification system:
NFPA ratings (scale 0 – 4)
0
1
0
Health = 0
Fire = 1
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
1
1
0
Health = 1
Fire = 1
Reactivity = 0
(Contd. on page 2)
US

Page 2/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 07/29/2016
Trade name:TCC-6072 PART B POLYOL
(Contd. of page 1)
47.0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
CAS: 25791-96-2
NLP: 500-044-5
Poly[oxy(methyl-1,2-ethanediyl)],.alpha.,.alpha.’,.alpha’-1,2,3-
propanetriyltris[.omega.-hydroxy-
20-50%
CAS: 110-63-4
EINECS: 203-786-5
butane-1,4-diol 5-<10% 4 First-aid measures Description of first aid measures General information:No special measures required. After inhalation:Supply fresh air; consult doctor in case of complaints. After skin contact:Generally the product does not irritate the skin. After eye contact:Rinse opened eye for several minutes under running water. After swallowing:If symptoms persist consult doctor. Information for doctor: Most important symptoms and effects, both acute and delayedNo further relevant information available. Indication of any immediate medical attention and special treatment needed No further relevant information available. 5 Fire-fighting measures Extinguishing media Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Special hazards arising from the substance or mixtureNo further relevant information available. Advice for firefighters Protective equipment:Wear self-contained respiratory protective device. Additional information Dispose of fire debris and contaminated fire fighting water in accordance with official regulations. 6 Accidental release measures Personal precautions, protective equipment and emergency proceduresNot required. Environmental precautions:No special measures required. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Reference to other sections See Section 7 for information on safe handling. (Contd. on page 3) US Page 3/9 Safety Data Sheet acc. to OSHA HCS Printing date 05/23/2018 Reviewed on 07/29/2016 Trade name:TCC-6072 PART B POLYOL (Contd. of page 2) 47.0 See Section 8 for information on personal protection equipment. See Section 13 for disposal information. Protective Action Criteria for Chemicals PAC-1: 9082-00-2Glycerol, propylene oxide, ethylene oxide polymer 30 mg/m 102-60-31,1',1'',1'''-ethylenedinitrilotetrapropan-2-ol 34 mg/m 110-63-4butane-1,4-diol 4.7 mg/m 78-83-1butanol 150 ppm 280-57-9triethylenediamine 5.1 mg/m 98-82-8cumene 50 ppm 100-41-4ethylbenzene 33 ppm 1330-20-7xylene 130 ppm PAC-2: 9082-00-2Glycerol, propylene oxide, ethylene oxide polymer 330 mg/m 102-60-31,1',1'',1'''-ethylenedinitrilotetrapropan-2-ol 370 mg/m 110-63-4butane-1,4-diol 52 mg/m 78-83-1butanol 1,300 ppm 280-57-9triethylenediamine 56 mg/m 98-82-8cumene 300 ppm 100-41-4ethylbenzene 1100* ppm 1330-20-7xylene 920* ppm PAC-3: 9082-00-2Glycerol, propylene oxide, ethylene oxide polymer 2,000 mg/m 102-60-31,1',1'',1'''-ethylenedinitrilotetrapropan-2-ol 2,200 mg/m 110-63-4butane-1,4-diol 640 mg/m 78-83-1butanol 8000* ppm 280-57-9triethylenediamine 340 mg/m 98-82-8cumene 730 ppm 100-41-4ethylbenzene 1800* ppm 1330-20-7xylene 2500* ppm 7 Handling and storage Handling: Precautions for safe handlingNo special measures required. Information about protection against explosions and fires:No special measures required. Conditions for safe storage, including any incompatibilities Storage: Requirements to be met by storerooms and receptacles:No special requirements. Information about storage in one common storage facility:Not required. Further information about storage conditions:None. (Contd. on page 4) US Page 4/9 Safety Data Sheet acc. to OSHA HCS Printing date 05/23/2018 Reviewed on 07/29/2016 Trade name:TCC-6072 PART B POLYOL (Contd. of page 3) 47.0 Specific end use(s)No further relevant information available. 8 Exposure controls/personal protection Additional information about design of technical systems:No further data; see item 7. Control parameters Components with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. Additional information:The lists that were valid during the creation were used as basis. Exposure controls Personal protective equipment: General protective and hygienic measures: The usual precautionary measures for handling chemicals should be followed. Breathing equipment:Not required. Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Eye protection:Goggles recommended during refilling. 9 Physical and chemical properties Information on basic physical and chemical properties General Information Appearance: Form: Liquid Color: Off-white Odor: Characteristic Odor threshold: Not determined. pH-value: Not determined. Change in condition Melting point/Melting range: Undetermined. Boiling point/Boiling range: 101 C (213.8 F) Flash point: >94 C (>201.2 F)
Flammability (solid, gaseous): Not applicable.
(Contd. on page 5)
US

Page 5/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 07/29/2016
Trade name:TCC-6072 PART B POLYOL
(Contd. of page 4)
47.0
Ignition temperature: 290 C (554 F)
Decomposition temperature: Not determined.
Auto igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: Not determined.
Density at 20 C (68 F): 1.06 g/cm (8.85 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 9.7 %
VOC content: 9.69 %
103.0 g/l / 0.86 lb/gl
Solids content: 3.7 %
Other information No further relevant information available.
10Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:
?
Carbon monoxide and carbon dioxide
US
(Contd. on page 6)

Page 6/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 07/29/2016
Trade name:TCC-6072 PART B POLYOL
(Contd. of page 5)
47.0
11Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values that are relevant for classification:
25791-96-2Poly[oxy(methyl-1,2-ethanediyl)],.alpha.,.alpha.’,.alpha’-1,2,3-propanetriyltris[.omega.-hydroxy-
OralLD501,002.5 mg/kg (rat)
DermalLD50>2,000 mg/kg (rat)
Primary irritant effect:
on the skin:No irritant effect.
on the eye:No irritating effect.
Sensitization:No sensitizing effects known.
Additional toxicological information:
The product is not subject to classification according to internally approved calculation methods for
preparations:
When used and handled according to specifications, the product does not have any harmful effects according to
our experience and the information provided to us.
Carcinogenic categories
IARC (International Agency for Research on Cancer)
1318-02-1zeolites 3
98-82-8cumene 2B
100-41-4ethylbenzene 2B
1330-20-7xylene 3
NTP (National Toxicology Program)
98-82-8cumene R
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Additional ecological information:
General notes:Not known to be hazardous to water.
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
US
(Contd. on page 7)

Page 7/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 07/29/2016
Trade name:TCC-6072 PART B POLYOL
(Contd. of page 6)
47.0
13Disposal considerations
Waste treatment methods
Recommendation:Smaller quantities can be disposed of with household waste.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
14Transport information
UN-Number
DOT, ADN, IMDG, IATA not regulated
UN proper shipping name
DOT, ADN, IMDG, IATA not regulated
Transport hazard class(es)
DOT, ADN, IMDG, IATA
Class not regulated
Packing group
DOT, IMDG, IATA not regulated
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN “Model Regulation”: not regulated
15Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
TSCA (Toxic Substances Control Act) (Substances not listed):
All ingredients are listed.
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
(Contd. on page 8)
US

Page 8/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 07/29/2016
Trade name:TCC-6072 PART B POLYOL
(Contd. of page 7)
47.0
Proposition 65
Chemicals known to cause cancer:
98-82-8cumene
100-41-4ethylbenzene
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
98-82-8cumene D, CBD
100-41-4ethylbenzene D
1330-20-7xylene I
TLV (Threshold Limit Value established by ACGIH)
100-41-4ethylbenzene A3
1330-20-7xylene A4
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsVoid
Hazard pictogramsVoid
Signal wordVoid
Hazard statementsVoid
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision05/23/2018 / 2
Abbreviations and acronyms:
ADR: Accord europ en sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
(Contd. on page 9)
US

Page 9/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/23/2018 Reviewed on 07/29/2016
Trade name:TCC-6072 PART B POLYOL
(Contd. of page 8)
47.0
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
US

Our Mission