LR_2OO WHITE
Flevision : 06 / 2t / 201,9
lSafetv Data Sheet _.
Sectlon 1 : ldentification
Product Name: LR-200 WHITE
ldentification: Epoxy Resin Blend
Manufacturer: Resin Services lnc.
5959 18 % Mile Road
Sterling Heights Ml 483’14 USA
P h ( 5ti6
)2 54 -67 7 0 F ax(586)-254 -6947
* * :tt’250 “C)
Density: 12.3 Viscosity: medium liquid
Specific Gravity (H2O=1, at 4 “C): L.48 %Volatile O %
Evaporation Rate: N/AV
Section 1Cl – Stability and Reactivity
Stability: Stable at room temperature in clo:;ed cr:ntainers under normalstorage and handling conditions.
Polymerization: Hazardous polymerization c:anncrt occur.
Chemical Incompatibilities: STRONG LEWIS OR IVIINERAL ACIDS AND STRONG MINERAL AND ORGANTC
BASE/ESPECTALLY PRtMARy AND SECONDARy ALtpHATtC AMtNES.
Conditions to Avoid: AVOID HEAT, FLAME AND CICNTACT WITH STRONG OXIDIZING AGEN.T.
Hazardous Decomposition Products: Thermal oxidative decomposition can produce CARBON MONOXIDE,
ALDEHYDES AND ACIDS MAY BE FORMED DURING COMBUSTION.
6lPage

LR-2OO WHITE
Revision: 06/21/2019
Section 11 – Toxicological Information
Likely routes of exposure: Eye Contact, Skin contact, Ingestion
symptoms related to the physical, chemical and toxir:ological characteristics:
Ingestion: This material has a low potential for toxic efferct due to ingestion.
Skin Contact: Prolonged or widespread skin contact is not likely to cause toxic effects.
lrritation:
Skin: Skin contact has caused allergic skin reactions in certain sensitized individuals
Eyes: May cause slight temporary eye irritation with locerl redness Mechanical irritation possible due to solid filler materrars
Inhalation: May cause allergic respiratory response upon exposure to healed vapors
Delayed and immediate effects and also chronic effercts from short and long term exposure:
Carcinogen: This material contains no known or suspected carcinogens in levels above O 1%
Mutagen: This material contains no known or suspected mutagens in levels above O 1%
Reproductive Hazard: This material contains no materiills known or suspected to cause reproductive hazards rn levels above O 1%
Numerical measures of toxicity:
This finished product has not been tested to determine individual toxicological/ecological limits. Individual components of this mixture
have been independently tested by the raw material manufacturers The results for the individual components may not be
representative of the toxicity of this finished product.
Section 12 – Ecological lnformation
Ecotoxicity: Diglycidyl Ether of Bisphenol-A (DGEBA) resins (44% formula mass) are toxic to aquatic organisms (1C50/1C50
between 1 and 10 mg/L in most sensitive species) However, DGEBA is insoluble in water under most conditions Individual
components of this mixture have been independently tested by the raw material suppliers and any known information has been
presented above The results for the individual components may not be representative of the ecological toxicity of this flnished product
Caution should be taken to prevent release to the environment See Section 13 for furlher information
Persistence and degradability: This material contains components that show little or no evidence of biodegradability Caution should
be taken to prevent release to the environment. See Section 13 forfurther information
Degradation: Based on the stringent OECD test guidelinc.s, this material cannot be considered as readily biodegradable; however,
these results do not necessarily mean that he material is not biodegradable under environmental conditions,
Bioaccumulative potential: N/A
Mobility in soil: N/A
Other adverse effects: N/A
7lPage

LR-2OO WHITE
Revision: 06/27 /2019
Section 13 .- Disposat Considerations
Disposal methods:
Preferred method of disposal includes incineration under controlled conditions in accordance with all localano
national laws and regulations. The generation o1’waste should be avoided or minimized where possible, Untreated
material is not suitable for disposal. Waste, even small quantities, should never be poured down drains, sewers or
watercourses. Waste must be disposed of in accordance with federal, state and localenvironmentalcontrol
regulations, This material, when properly mixed and cured with its hardener component at the proper mix ratio,
may be safely landfilled.
Contaminated packaging: Empty containers can only be disposed of when the remaining product adhering to the
container walls has been removed. Hazard warning labels should be removed from container onlv after it ha:; oeen
properly emptied.
Section 1’4 – Transport Information
D.O.T. AIR/ROAD/RAIL ICAO/IATA I{IR TRANSPoRT IMDG SEA TRANSPoRT
TRANSPORT(49CFR)
UN NUMBER: NON-REGULATED UN NUMETER: NON’REGULATED UN NUMBER: NON-REGULATED
Proper Shipping Name: Proper Shipping Name: Proper Shipping Name:
NON-REGUTATID NON REGLILATED NON-REGULATED
Transport Hazard Class: Transport Flazard Class: Transport Hazard Class:
NON-REGULATED NON-REGULATED NON-REGULATED
Packing Group: Packing Group: Packing Group:
NON-REGULATED NON-REGLII.ATED NON-REGULATED
8lPage

LR-2OO WHITE
Revision: 06/27 /2019
$ection 15 – Regulatory Information
EPA Regulations:
RCRA Hazardous Waste Number: Not listed (40 CFR 26I.33)
RCRA Hazardous Waste Classification (a0 CFR 26L.): Not classified
CERCLA Hazardous Substance (40 CFR 302.41listed/unlisted specific per RCRA, Sec, 3OO1; CWA, Sec, 311(bXa);CWA,
Sec. 307(a), CAA, Sec. 112
CERCLA Reportable Quantity: NA
SARA 311/312 Codes:
SARA Toxic Chemical (40 CFR 372.65): Not listed
SARA EHS (Extremely Hazardous Substance)(40 CFR 355): Not listed, Threshold Planning Quantity (Tpe)
OSHA Regulations:
Air Contaminant (29 CFR 1910.1000, Table Z-1., Z-1.-A: Not listed
OSHA Specifically Regulated Substance (29CFR 1910)
Section 16 – Other information
Company policy or disclaimer- This information is furnished without warranty, representation, inducement
or license of any kind, except that it is accurate to the best of Resin Services Inc’s knowledge, or obtained from
sources believed by Resin Services Inc. to be accurate, and Resin Services Inc, does not assume any legal
responsibility for use or reliance upon same. Customers are encouraged to conduct their own tests. Before using any
product, read its label.
9lPage