TECHNICAL DATA SHEE T
60001
PEEL PLY
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS 60001_02 .21_Issue1
60001
Peel ply
Ideally suited to aerospace applications
Features and Benefits
Porous, polyester peel ply.
Heat set and scoured, for use directly against
laminates or bond lines.
Available coated and non- coated, depending on user
requirement.
Approved on a range of OEM specifications for
composite manufacture and metal bonding.
This product is particularly recommended for use with
phenolic resin systems.
Also recommended for composite manufacture and
metal bonding applications.
Manufactured by Precision Fabrics Group (PFG).
PRODUCT VARIANTS
NAT Scoured and heat set finish
IO International Orange for easy identification
VLP Very Low Porosity finish
SRB Super Release Blue (inert, heat stabilised, cross-linked polymer finish)
PROPERTIES
Maximum use temperature 204 C 400 F
Color Natural, blue and orange
Fabric type Polyester
Fabric weight 85g/m 2.5oz/yd
AVAILABILITY
Standard width 1.52m 60in
Standard length 274m 300yd
Slit widths available
STORAGE
No special storage conditions required.
TECHNICAL DATA SHEE T
60001
PEEL PLY
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS 60001_02 .21_Issue1
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.