TECHNICAL DATA SHEE T
VAC-PAK
HS6262
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS6262_02.21_Issue1
VAC-PAK
HS6262
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
Blue heat stabilized, blown nylon 6/6 film.
Predominantly used in high temperature and
pressure autoclave cures, and in the manufacture of
thermoplastics.
Excellent elongation and heat ageing characteristics,
when used at pressures of 100PSI (6.9bar) and
temperatures of up to 232 C (450 F) for several hours.
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 232 C 450 F
Color Blue
Tensile strength at break (ASTM D882) 85MPa 12300PSI
Elongation at break (ASTM D882) 350%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 3.4m (open) Up to 122in (open)
Formats available Tube, sheet and V sheet
STORAGE
Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.