TECHNICAL DATA SHEE T
VAC-PAK
HS800
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS800_02.21_Issue1
VAC-PAK
HS800
Vacuum bagging film
Ideally suited to high temperature and pressure applications
Features and Benefits
Heat stabilised co-extruded film produced from
modified nylon resin.
Ideal for advanced composite fabrication and
adhesive bonding as well as other high
temperature/pressure applications where softness
and workability are essential.
The co-extrusion process combines multiple layers of
resin flow into film prior to exiting the extrusion die.
This process represents the most advanced state of
the art technology in blown film production.
Can be heat seamed to meet any custom shape
requirements.
PROPERTIES
Maximum use temperature 191 C 375 F
Color Gold tinted
Tensile strength at break (ASTM D882) 83MPa 12000PSI
Elongation at break (ASTM D882) 300%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 4m (open) Up to 180in (open)
Formats available Sheet, V sheet, lay flat tube
STORAGE
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.