08RIV58_TDS.pdf

DESCRIPTION
Various infusion tube fittings are available to connect tubes and valves to control resin flow.
TECHNICAL DATA
Nylon fittings
Material type Nylon
Maximum use temperature 356 F (180 C)
Color Translucent
Infusion valve
Material type Polypropylene
Maximum use temperature 248 F (120 C)
Color Black
SIZES
Connector Type Part Name Works with:
Nylon barb “T” fitting NTF3/8 3/8″ I.D. tubing
NTF1/2 1/2″ I.D. tubing
NTF5/8 5/8″ I.D. tubing
Nylon barb “Elbow” fittings NEF3/8 3/8″ I.D. tubing
NEF1/2 1/2″ I.D. tubing
NEF5/8 5/8″ I.D. tubing
Nylon barb “Coupling” fittings NCF3/8 3/8″ I.D. tubing
NCF1/2 1/2″ I.D. tubing
NCF5/8 5/8″ I.D. tubing
Infusion Valve Infusion Valve 1/2 3/8″ I.D. tubing
Infusion Valve 5/8 1/2″ I.D. tubing
NOTES
The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Infusion tube fittings
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone: +1 714-899-8100
Fax: + 1 714-899-8179
E-mail: airtech@airtech.com
Website: www.airtech.com
Data Sheet
INFUSION TUBING CONNECTORS & VALVES
Last updated : 2023-10-17
Catalog position : Resin infusion products
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold “as is”. Airtech International, Inc.
disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for
specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.