Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy themselves as to
contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or fitness, nor is protection from any
law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of our materials and in no event shall we be liable for
special, incidental or consequential damages
2/22/2019 ISO 9001:2015 Registered Company
DURAKOTE GEL COATS
LOW VOC / LOW HAPS
102-010
World Class Coatings
Technology
HIGH PERFORMANCE BLACK SANDING PRIMER
____________________________________________________________________________________________
Durakote 102-010 is a Low VOC, Low HAPs, High Performance sanding primer which is designed to be used in
spray applications for open and closed molding. After de-molding, this product is easily sanded and top-coated.
The product is fully promoted and designed to use as is . This product is not recommended for applications
where the coating will see long term continuous UV radiation. This coating is color fast and light stable for short
term exterior exposure only.
PERFORMANCE BENEFITS
Excellent sand ability and process ability
Excellent recoat ability
Fast cure
Low porosity surface
Good elongation and resistance to cracking during remolding
TYPICAL LIQUID GEL COAT PROPERTIES
Gel time @77F, 2% MEKP .. 9 minutes
Gel to Peak ..15 minutes
Viscosity @ 77F, 20RPM 5000 cps
Thyrotrophic Index 6 minimum
Weight per gallon. 11.7 lbs/gal
Weight percent monomer .27.8 %
Weight percent HAPs … 27.8 %
VOC % (by weight) 34%
Solid Content % (by weight) . 66%
(Local regulations vary. Consult your local AQMD to determine actual VOC or monomer/haps % in use)
USAGE GUIDELINES
Mix this product for at least 5 minutes at low speed prior to use
MEKP levels should be kept at 2%
Do not apply gel coats below 64F
Apply using airless spray at a the lowest possible pressure
Film thickness must be between 15mils and 25mils in 2-3 passes with a short flash off time between passes
SHELF LIFE
This product is stable for six months from date of production when stored away from sunlight at no more than 77F.
Extended storage will result in some drift in gel times and viscosity. Elevated temperatures will reduce shelf life
further