A Quality Product from Hawkeye Industries, Inc.
Duratec
Polyester EZ Sanding Primer
An exceptionally easy-
to-sand primer, that can
be polished to a smooth,
porosity-free surface.
Uses: for surfacing patterns for
composite molds, and where an
easy sanding, high build primer
is required.. Apply over tooling
board, MDF, brick, concrete,
plaster and clay.
Features:
Builds rapidly and provides a
surface that sands quickly.
Use less sandpaper
Reduce sanding labor
Easy to spray from HVLP guns.
Low porosity, fine smooth
surface.
.Start sanding with a fine grit,
reduce dust and film loss.
Build up to 30 mils.
Adhesion to most epoxies. Heat distortion temperature of 83 C, 180 F
Not recommended for use on CNC patterns over a low (less than 120 F) HDT tooling putty.
Use Instructions – Page 2
714-061 White
Limited/ warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any
warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special, incidental or consequential damages.
P. O. Box 415, Bloomington, CA 92316
(USA) 800-977-0060 (Outside USA) 909-546-1160 Fax 909-546-1161
Email: hawkeyesales@hawkeyeind.com www.duratec1.com
714-061 White
Duratec
Polyester EZ Sanding Primer
Product Properties: All time calculations are based on temperatures of 77 F, 25 C
As measured on a Brookfield Viscometer Model RVF, Spindle #2 at 20 rpm……………………………………2900 cps +/- 150 cps
Thixotropic……………………………………………………………………………………………………………………………………………………….6.5
Gel Time: Sample based on a 100 g mass catalyzed at 2 percent with mekP…………………………………………22 min +/- 2 min
Weight per Gallon…………………………………………………………………………………………………………………………..11.8 lb., 5.36 kg
Coverage per Gallon:
10 mil thickness (wet-dry) ……………………………………………………………………………………………………………………….110-115 ft
2
250 micron thickness (wet-dry) ……………………………………………………………………………………………………………10.2-10.7 m
2
Revised 06-23-16
Limited/ warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any
warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special, incidental or consequential damages.
P. O. Box 415, Bloomington, CA 92316
(USA) 800-977-0060 (Outside USA) 909-546-1160 Fax 909-546-1161
Email: hawkeyesales@hawkeyeind.com www.duratec1.com
Data Sheet
Continued
Page: 2