COMPATIBILITY
BB470 an be used for bonding of any of the
following tooling boards:
BP600
BP700
BP701
BP750
BP850
FEATURES & BENEFITS
BB470 provides a high-strength adhesion
and offers room temperature curing.
Colour and density matched to BP700 and BP701
Good adhesion to a wide range of materials
Good open life
High mechanical properties
Room temperature curing
BB
470
TOOLING BOARD ADHESIVE
BB470 tooling board adhesive is specifically compatible with our range of medium-density
polyurethane (PU) tooling boards, for bonding of boards.
P
ROPERTY
VALUE
COLOUR Brown
HARDNESS, SHORE D (+/- 3), ISO 868
7
0
RESIN DENSITY, G/CC (+/- 0.3) 0.76
GLASS TRANSITION TEMPERATURE (Tg) DSC
, POST CURED C (+/- 5)
HARDENER VISCOCITY, 50
C, CPS (+/- 60)
1
,600
GEL TIME, 25
O
C, 150G MASS, MINUTES (+/-
5)
THIN FILM GEL TIME, 25
O
C, HOURS
TECHNICAL PROPERTIES
7.5
MIX RATIO BY WEIGHT, RESIN : HARDNER
PACK SIZE, PART A, KG
5
PACK SIZE, PART B, KG
HARDNER DENSITY,
G/CC (+/- 0.3)
1
1.03
100
220
3 – 4
100
: 20
APPROX. COVERAGE PER PACK (SUBSTRATE DEPENDENT,
M
2
@ 1MM THICKNESS)
RESIN VISCOCITY, 50 C, CPS (+/- 300)
45
Base Materials is an expert in high-performance
syntactic materials for a wide range of industries
including automotive, aerospace, foundry,
manufacturing, marine, motorsport, rail and subsea.
Customers are at the heart of what we do. Our proven
high-quality solutions are engineered to meet your
challenging application requirements.
CONTACT US
+44 (0)116 286 5073
sales@base-materials.com
www.base-materials.com
Disclaimer
The test data and results set forth herein are based on laboratory work and do not necessarily
indicate the results that the buyer or user will attain. Base Materials Limited makes no warranty
expressed or implied, including warranties of merchantability or fitness for a particular use. Under
no circumstances will Base Materials Limited be liable for incidental, consequential or other
damages, alleged negligence, breach of warranty, strict liability or any other legal theory arising
out of the use or handling of this product.
PACK SIZES
BB470 is a two part adhesive, available in a pack
size of 5kg part A and 1kg part B.
STORAGE OF MATERIAL
The product must be stored indoors, on a flat
dry surface at a temperature between
+ 15
O
C to + 40
O
C. After use, tightly reseal.
The resin component may crystallize during
storage. If crystallized, vent container and heat
to + 55
O
C to + 65 C until crystals dissolve.
Stir well after product has liquefied.
SHELF LIFE
24 months from date of manufacture.
SUBSTRATE PREPERATION
All surfaces should be free of contamination. Any
cleaning solutions must be allowed to evaporate before
application of BB470.
USAGE
Always use clean dry tools for mixing and applying.
Mix according to the mix ratio stated above (100:20 by
weight).
Mix thoroughly and use immediately.
Material temperatures should not be below + 18 C
when mixing.