Urethane Acrylate Adhesives
by Scott Bader
PEVE Bonding Pastes
PEVE Bonding Pastes
Primerless MMA Adhesives
Bonding Pastes
Bonding Pastes
Advantage 60
Product Overview
Crestomer Advantage 60 is a structural adhesive that bonds a wide range of substrates with minimal surface
preparation and lower odour than competitive materials. It has a white colour, with a geltime of 60 minutes and
bonded parts are workable in 3 hours. Crestomer Advantage 60 is based on Scott Bader s innovative urethane
acrylate technology and exhibits exceptional impact strength and toughness. Its excellent adhesion and gap
filling capabilities offer great flexibility in design with significant time and cost savings.
Features and Benefits
Urethane acrylate base
Excellent retention of toughness
Excellent fatigue and impact resistance
Non sag
Excellent adhesion and high elongation at break
Highly thixotropic
Perfect gap filling solution
Application on vertical surfaces
Application Properties
Working Time 60 Minutes
Fixture Time
2
3.0 hours
Gap Filling 1 15 mm/ 0.04 – 0.6 inch
Colour change (over cure)None
Recommended Application
Temperature
18
o
C – 25
o
C/ 66
o
F – 77
o
F
Crestomer
Advantage 60 TDS | Page 1 of 3 | Version: February 2018 www.scottbader.com
Tensile Strength
5
22 – 25 MPa
Tensile Modulus 400 – 600 MPa
Tensile Elongation 100 – 120%
Hardness 55 Shore D
Water Absorption 0.68%
Approvals –
Mechanical Properties
Technical Data Sheet
Crestomer
Advantage 60 TDS | Page 2 of 3 | Version: February 2018 www.scottbader.com
Recommended Substrates
Metals
Stainless Steel
Aluminium
–
Wood
Marine Ply
Balsa
–
Composites
GRP/FRP
Polyester Resin
DCPD
Vinyl Ester
Epoxy
–
Non – Recommended
Substrates
Recommended Substrates
(Lapshear Strength MPa
6
)
Product Advantage 60
Viscosity
3
280,000 – 350,000 cP
Specific Gravity 1.15
Volatile Content 40 – 45%
Mixed Ratio
4
(by Volume) 10:1
Appearance White paste
Shelf Life
5
12 months
Liquid Properties
Typical
Bonding
Paste
10
8
6
4
2
0
Laminated
joint
Typical
2-part
PU
MethacrylateCrestomer
Advantage
FRP to FRP Bond Strength
Crestomer
Advantage 60 TDS | Page 3 of 3 | Version: February 2018 www.scottbader.com
1. Geltime measured with 100g mass of adhesive at 25
o
C/ 77
o
F.
2. Time taken at 23
o
C/ 73
o
F (ambient temperature) to achieve 1.4MPa strength in
lap-shear tests according to BS ISO.
3. Measured using Brookfield Viscometer at 25
o
C/ 77
o
F.
4. Mix ratio based on cartridge dispensing, as supplied.
5. Shelf life defined from date of manufacture when stored as recommended.
2018 ScottBader Co Ltd, February 2018
Scott Bader UK
Wollaston, Wellingborough, Northants
NN29 7RL, UK
Tel: +44 (0)1933 666738
Email: enquiries@scottbader.com
All information on this data sheet is based on laboratory testing and is not intended for design purposes. Scott Bader makes no representations or warranties of any kind concerning this
data. Due to variance of storage, handling and application of these materials, Scott Bader cannot accept liability for results obtained. The manufacture of materials is the subject of granted
patents and patent applications; freedom to operate patented processes is not implied by this publication.
Urethane Acrylate Adhesives
by Scott Bader
PEVE Bonding Pastes
PEVE Bonding Pastes
Primerless MMA Adhesives
Bonding Pastes
Bonding Pastes
Surface Preparation
Crestomer Advantage 60 has excellent adhesion to FRP material provided that the surface has been maintained
free of dust and grease. This can be guaranteed by the use of propietary stripable cloths such as peel ply
(without lubricant contaminates). If the laminate surface is more than three days old it is recommended that
they are lightly abraded and wiped with acetone or styrene on a lint-free, clean cloth prior to bonding.
Application
Crestomer Advantage 60 is supplied ready to use in pre-packed 380ml co-axial cartridges with no hand
mixing required. Crestomer Advantage 60 is supplied pre-accelerated and contains advantage catalyst within
the cartridge. The mixer indicator system imparts a neutral, opaque white colour and this blends well in
cosmetically sensitive applications.
For industrial/ commercial use only. The user must determine the suitability of a selected adhesive for a given
substrate and application. Contact your local Scott Bader representative for questions or assistance with the
selection of adhesives for your use. This product is intended for use by skilled individuals at their own risk.
Recommendations contained herein are based on information we believe to be reliable. The properties and
strength values are obtained under controlled conditions at the Scott Bader laboratory.
Storage and Shelf Life
Crestomer Advantage 60 should be stored internally in its original container. It is recommended that the storage
temperature should be between 15
0
C and 20
0
C/ 60
o
F and 68
o
F. Cartridges should be opened only immediately
prior to use. Products should never be frozen.
The shelf life for Crestomer products is defined from date of manufacture if stored as recommended. The expiry
date is indicated on the product labels.
Packaging
Crestomer Advantage 60 is supplied in 380ml co-axial cartridges.
Health and Safety
See separate Material Safety Data Sheet.