TMES 99
PRODUCT USAGE
EverStrong ES99 is designed to be applied to the reinforcing materials or mold prior to placement. Spray a uniform coat to
the surface to be adhered. If heavy mat or pad, apply adhesive to both surfaces about to be joined. Spray an even coat of
adhesive with at least 80% to 100% coverage of each surface. Allow to briefly dry until tacky. Place the surfaces together and
apply pressure. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the adhesives
and materials are at 60 F or higher. If surfaces are porous, a heavier coat is recommended.
STORAGE
For canisters, do not close the valve after use. Leave the gun and
hose connected to the canister. Recommended to store canister off
the floor if temperatures below 60 F.
PHYSICAL PROPERTIES
Appearance: Liquid, clear or blue
Specific Gravity: .74 + .03
Spray Tip: 6501
Spray Pattern: Pebble Spray
Flammability: Flammable per ASTM E-681-04
Solvent: Hydrocarbons
Shelf Life: 15 months
Freezing: Not damaged by freezing but return to room
temp before use.
PACKAGING
ES99-0013C(B) 13 oz Aerosol Can
ES99-009C(B) 9 lbs Disposable Canister
ES99-030C(B) 30 lbs Disposable Canister
ES99-140C(B) 140 lbs Returnable Canister
ES99-270C(B) 270 lbs Returnable Canister
All available in Clear (C) or Blue (B)
Specifically Formulated
for Infusion
Vacuum Molding
Fast Tack for securing
reinforcing materials
in mold
Low Shrinkage
during Cure
NO HAPS
Compatible with
Infusion resins
EverStrong ES99 is a specialty industrial spray adhesive specifically designed for the infusion
molding process. ES99 is designed to adhere and hold reinforcing fiberglass materials (mats,
pads, strips) in place prior to and during resin infusion. Specifically formulated for the infusion
process, ES99 will not interfere with the polymer matrix integrity and will cross-link with resins
to create an integrated matrix.
KEY FEATURES
Specifically Formulated for Infusion
Vacuum Molding
Fast Tack for securing reinforcing materials
in mold
Low Shrinkage during Cure
NO HAPS
Compatible with Infusion resins
ES99-3
VACUUM INFUSION
ADHESIVE
Disclaimer of Warranty: NewStar Adhesives Inc. expressly disclaims all warranties either expressed or implied, including but not
limited to merchantability and fitness for particular purpose. User is responsible for determining this product is fit for specific
purpose and application method and assumes all risk and liability herewith. Manufacturer liability is limited to replacement of
product or reimbursement of purchase cost, at our discretion. This provision relates to all sales and cannot be modified.
Manufacturer: NewStar Adhesives Inc., gluepros@newstaradhesives.com, 855-497-0700
See MSDS Data Sheet for Proper Handling and Safety Information
NO ADHESIVE
NO ADHESIVE
FLEX STRENGTH
MODULUS OF ELASTICITY
EVERSTRONG ES99 Infusion Adhesive reinforces the matrix making it both stronger and more
flexible than all other competitive adhesives.
23.4%
0.3%
ES99
ES99
COMP N
COMP N
COMP Q
COMP Q
COMP M
COMP M
4.2%
-2.0%
0.0%
0.0%
-6.3%
-4.5%
-6.0%
-11.1%
ES 99
Specifically Formulated
for Infusion
Vacuum Molding
Fast Tack for securing
reinforcing materials
in mold
Low Shrinkage
during Cure
NO HAPS
Compatible with
Infusion resins
VACUUM INFUSION
ADHESIVE
Max Flex Test (N/m2)
MOE (N/m2)
In terms of Elasticity, ES99 improved the Modulus of Elasticity as compared to all competitive adhesives.
Indeed ES99 was the ONLY adhesive that improved the elasticity of the samples. All other adhesives
reduced the elasticity compared to the control samples made without adhesive.
* An independent 3rd party prepared 5-ply fiberglass/resin panels using ES99 and all major competitive adhesives as well as a
control panel constructed without adhesive. Five (5) samples from each panel were prepared and tested per ASTM D790
protocol by CERL/MCA laboratories. Lab report is available upon request.
In tests per ASTM D790, independ
ent laboratories* found ES99 improved the strength of samples almost 20% and 30% compared
t
o competitive adhesives. In fact, ES99 samples were found to be even stronger than samples made without adhesive.
TM