SC-125 Page 1 of 2 Date: 12/14/2021
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
PIGMENT, RELEASE & MISCELLANEOUS PRODUCT
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
SC-125
ALUMINUM GRANULES
TEARDROP SHAPE
SC-125 Aluminum Granules are typically used in epoxy casting resin systems to reduce shrinkage and enhance heat conductivity.
Generally, the most frequent use is with TC-1650 A/B and TC-1651 A/B hi-temperature aluminum powder filled epoxy casting system.
Note: Be sure to pre-mix resin and hardener prior to adding SC-125 Aluminum Granules. SC-125 also provides a cost reduction when
displacing resins in various casting applications.
Uniform sized aluminum granule Teardrop shape
Free of metallic dust Free of any other contaminants
Does not oxidize No moisture
Excellent product distribution and blending properties Density-average: 19 cu. in. per lb.
APPLICATION:
SC-125 will allow a wide latitude of loading for different types of usage. Generally, the most frequent use is for casting an epoxy tooling
backup, and the typical loading is 100 parts epoxy with 100 parts SC-125. Various tool configurations may require less SC-125 as the
100 to 100 mix may not flow well enough without use of vibration. Compression values at this loading level have been found to be close
to the same compression value of the epoxy used.
PACKAGING
Available in 25 lb. boxes and 50 lb. bags.
Refer to the Material Safety Data Sheet before using this product.
An ISO-9001 Certified company