Rev. 05/08/2018 by: DP
3001-3
(100043-000)
WATER-BLOWN RIGID POLYURETHANE FOAM
PRODUCT DESCRIPTION AND APPLICATIONS
3001-3 is a two-component, rigid, water-blown polyurethane structural foam system. This unique product
is excellent for applications requiring a low density with a strong skin. It is used widely in a variety of
industries such as taxidermy and the manufacture of mannequins. Parts can be easily molded out of
urethane foam that otherwise would require labor-intensive carving or lathing.
TYPICAL PHYSICAL PROPERTIES
(for components) TEST METHOD COMPONENT A COMPONENT B
Viscosity, cps ASTM D-2393 200 50 2200 400
Specific gravity ASTM D-1638 1.23 0.05 1.05 0.0 5
Mix ratio by weight 52 48
by volume 50 50
(for cured material)
Free Rise Density, lbs./ft. 3.2 0.2
REACTIVITY DATA (74 F)
Cream time, seconds 50 5
Rise time, seconds 180 10
Tack free time, seconds 240 20
HANDLING (STORAGE)
Component A (isocyanate) – storage area should be maintained between 65 F to 85 F. Containers must be
tightly closed as a protection from moisture and foreign material.
Component B (polyol) – storage area should be maintained between 65 F to 85 F. Containers must be
tightly closed as a protection from moisture and foreign material.
IMPORTANT NOTICE
The information contained herein is based on data believed to be accurate at the time of publication. Data
of this type should not be used for specification for fabrication and product design as it is the user s
responsibility to determine this product s fitness for a particular use.