Rev. 03/01/2018 by: DP
3001-2 FR
(100042-000)
WATER-BLOWN RIGID POLYURETHANE FOAM
PRODUCT DESCRIPTION AND APPLICATIONS
3001-2 FR is a two-component, rigid, water-blown, fire-retardant, polyurethane foam system. This unique
product is excellent for applications requiring a low density with a strong skin. It is used widely in a
variety of industries such as taxidermy and the manufacture of mannequins. Parts can be easily molded
out of urethane foam that otherwise would require labor-intensive carving or lathing.
TYPICAL PHYSICAL PROPERTIES
(for components) TEST METHOD COMPONENT A COMPONENT B
Viscosity, cps ASTM D-2393 170 20 2400 200
Specific gravity ASTM D-1638 1.24 0.05 1.07 0.0 5
Weight per gallon, lbs 10.3 0.1 8.9 0.1
Mix ratio by weight 52 48
by volume 50 50
(for cured material)
Free Rise Density, lbs./ft. 2.5 0.5
REACTIVITY DATA
Cream time, seconds 60 10
Rise time, minutes 170 20
Tack free time, minutes 250 20
HANDLING (STORAGE)
Component A (isocyanate) – storage area should be maintained between 65 F to 85 F. Containers must be
tightly closed as a protection from moisture and foreign material.
Component B (polyol) – storage area should be maintained between 65 F to 85 F. Containers must be
tightly closed as a protection from moisture and foreign material.
IMPORTANT NOTICE
The information contained herein is based on data believed to be accurate at the time of publication. Data
of this type should not be used for specification for fabrication and product design as it is the user s
responsibility to determine this product s fitness for a particular use.