1000 South Linwood Avenue, Santa Ana, CA 92705
Phone: (714) 480-1370, Fax: (714) 558-1990
Date: 06/1/2014
CE 0726B
Product Information
CE 726B is a High Performance, multi-purpose polyurethane designed for processing through plural
component, high pressure or low pressure dispensing equipment. Once fully cured, it is tough yet
flexible with high impact and tear resistance along with excellent chemical and water resistance.
CE 0726B performs well as Concrete Stamp pad and Concrete Form Liners.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 200 – 300 600 – 900
Specific Gravity (gr/ml) 1.01 – 1.03 1.02 – 1.05
Physical Properties (Final Product)
Hardness, Shore A, ASTM D-2240 70- 75
Tensile Strength (psi), ASTM D-412 N/A
Elongation (%), ASTM D-412 N/A
Tear Strength (pli), ASTM D-624, Die C N/A
Color Opaque
Handling Characteristics
Mix Ratio by Weight (Component A: Component B) 53a / 47b
Mix ratio by volume 50a / 50b
Gel Time (at 75 degrees F), (seconds) 160 – 200
Tack Free Time (seconds) at Gel
Demold Time (minutes) 15 25
90% Cure Time (hours)* 24
(*) Final physical properties will be reached in a course of 48 hours.
Storage and Shelf Life
Components should be kept well sealed in a dry place from 70 to 90oF. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product MSDS for more information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes
no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the
suitability of any product for its intended use.