25CG46-F_TDS.pdf

Product Information
Units Test Method Results
Shore D ASTM D-2240 60 – 65
psi ASTM D-412 –
psi ASTM D-412 –
% ASTM D-412 –
pli ASTM D-624 –
– Visual Natural/Pigmented
Units Component A Component B
(A/B) 50 50
(A/B) 52 48
g/mL 1.19 – 1.21 1.03 – 1.05
cPs 900 – 1300 700 – 900
Visual Pale Yellow Opaque/White
Seconds
Minutes
Minutes
Hours
Storage and Shelf Life
Packaging
Component A: 500 lbNet Weight
2500 lbNet Weight
Component B: 450 lbNet Weight
2250 lbNet Weight
Physical Properties (Final Product)
CG 46
TECHNICAL DATA SHEET
Cast Elastomer Polyurethane System
CG 46 is a low viscocity elastomer designed for processing through plural component, low-pressure
dispensing equipment or mixing by hand. Once fully cured, this material is tough and has high impact
resistance. CG 46 exhibits very good surface characteristics and excellent moldability. CG 46 can be
used as an adhesive and is a good patch material for spray urethanes. Once mixed, this material is
thixotropic, allowing for easy brushing or spreading on vertical walls.
Shore Hardness
Tensile Strength
Tensile Modulus
Elongation
Tear Strength
Gel Time @ 75 F 300 – 400
Handling Characteristics
Mix Ratio by Volume
Mix Ratio by Weight
Specific Gravity @ 75 F
Viscocity @ 75 F
55 gallon steel drum (open top)
275 gallon plastic totes
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc.
The data on thes e s heets rel ates onl y to the s pec i fi c materi al des i gnated herei n. Etec o, Inc . as s umes no l egal res pons i bi l i ty for us e or rel i anc e
upon this data. The user should conduct sufficient investigation to establish the suitability of any product for its intended use.
Color
*Final properties will be reached in a course of several days. Properties are typical and not for specifications*
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
55 gallon steel drum (closed top)
275 gallon plastic totes
Tack Free Time 20
Demold Time 40
90% Cure Time* 24
Color