25E5070Y-D_TDS.pdf

Product Information
Units Test Method Results
Shore D ASTM D-2240 70
psi ASTM D-412 3500 – 4000
psi ASTM D-412 TBD
% ASTM D-412 65
pli ASTM D-624 TBD
– Visual Natural/Pigmented
Units Component A Component B
(A/B) 1 2
(A/B) 35 65
g/mL 1.16 – 1.18 1.06 – 1.08
cPs 50-100 500-700
Visual Pale Yellow Yellow
Seconds
Hours
Storage and Shelf Life
Packaging
Component A: 490Net Weight
Component B: 455Net Weight
Physical Properties (Final Product)
SPL-H 5070 Yellow
TECHNICAL DATA SHEET
Polyurethane Polyurea Spray Elastomer System
SPL-H 5070 is a high-performance, multi-purpose 100% solid polyurethane coating designed to
provide structural support. SPL-H 5070 contains no styrene or HCFC s.
SPL-H 5070 is an excellent replacement for polyester resin and fiberglass. SPL-H 5070 is designed to be
sprayed through most (1:2) plural component high pressure dispensing equipment such as Gusmer, Graco,
PMC and Glasscraft. SPL-H 5070 is tough, flexible with high impact and tear resistance.
Viscocity @ 75 F
Shore Hardness
Tensile Strength
Flexural Modulus
Elongation
Tear Strength
55 gallon steel drum (open top)
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The data on
these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this data. The user
should conduct sufficient investigation to establish the suitability of any product for its intended use.
Color
*Final properties will be reached in a course of several days. Properties are typical and not for specifications*
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened containers is six
(6) months from manufacturing date. Mix Component B well prior to each use. Purge opened containers with
dry nitrogen before resealing. Refer to product SDS for more information.
55 gallon steel drum (closed top)
90% Cure Time* 24
Color
Gel Time @ 75 F 25 – 40
Handling Characteristics
Mix Ratio by Volume
Mix Ratio by Weight
Specific Gravity @ 75 F