Description
InsulFoam I is an engineered insulation consisting of a superior
closed cell, lightweight and resilient expanded polystyrene (EPS).
InsulFoam I meets or exceeds the requirements of ASTM C578,
Type I, Standard Speci cation for Rigid, Cellular Polystyrene
Thermal Insulation. InsulFoam I has a nominal density of 1.0 lb/ft
3
.
In addition, InsulFoam I offers a long term, stable R Value and has
excellent dimensional stability, compressive strength and water
resistance properties. Insulfoam Insulation can contribute toward
environmental credentialing including LEED
credits.
Uses
InsulFoam I Insulation is successfully used in numerous commercial, industrial and residential applications. The following are examples of the many applications:
Interior & Exterior Wall Insulation
EIFS & Stucco Insulation
Single Ply Roof Insulation
Roof Recover Board
Continuous Below Grade Insulation
Foundation, Perimeter, Slab & Basement Insulation
Retaining Walls
Drainage Board
Waterproo ng Protection Board
Freezers & Cold Storage
Advantages
Environmentally Friendly. It does not contain any blowing
agents, may contain recycled material, and is 100% recyclable
if ever removed or replaced.
Stable R Value. The product s thermal properties will remain
stable over its entire service life. There is no thermal drift,
so the product is eligible for an Insulfoam 20 year thermal
performance warranty.
Proven Performance. EPS has been manufactured using
the same chemistry since the mid 1950s, providing proven
performance.
Water Resistance. InsulFoam I does not readily absorb moisture
from the environment.
Code Approvals. Insulfoam insulations are recognized by the
International Code Council Evaluation Service (ICC ES), and
have numerous Underwriters Laboratory and Factory Mutual
Approvals. Please contact your local Insulfoam representative
for details.
Sizes
InsulFoam I is available in 4′ x 4′ and 4′ x 8′ standard sizes with thicknesses from ” to 40″, and is readily available in custom lengths and widths with little to no impact on lead time. It is also available in tapered panels.
INSULATION ENGINEERED TO MAKE A DIFFERENCE.
Nationwide Manufacturing Toll Free: (800) 248 5995 www.Insulfoam.com
TDS# 19008 08/18
TYPE I 10 PSI
HIGH PERFORMANCE INSULATION
Typical Tested Physical Properties*
Property Test Method Value
Density (nom. pcf) ASTM C303 1.00
C-Value (Conductance) – per inch
BTU/(hrft
2
F)
@ 25 F
@ 40 F
@ 75 F
ASTM C518
or
ASTM C177
0.230
0.240
0.260
R-Value (Resistance) – per inch
(hrft
2
F)/BTU
@ 25 F
@ 40 F
@ 75 F
ASTM C518
or
ASTM C177
4.35
4.17
3.85
Compressive Strength
(psi, 10% deformation)
ASTM D1621 10
Flame Spread ASTM E84 < 20
Smoke Developed ASTM E84 150 300
*Properties are based on data provided by resin manufacturers, independent test agencies and Insulfoam.