25HP8208-F_TDS.pdf

Date: 11/27/18
HP 8208
Product Information
Physical Properties (Components)
Component A Component B
Viscocity at 75 F (cps) 160 – 220 500 – 700
Specific Gravity (gr/ml) 1.22 – 1.23 1.07 – 1.09
Physical Properties (Final Product)
Free Rise Density (pcf) 7.7 8.3
Compressive Strength ASTM D-1621 103 psi
Shear Strength ASTM D-273 75 psi
Handling Characteristics
Mix Ratio by Weight (Component A/ Component B) 52 / 48
Mix Ratio by Volume (Component A/ Component B) 50 / 50
Cream Time (at 75
o
F), (seconds) 55 – 65
Rise Time (seconds) 150 – 170
Tack Free Time (seconds) 220 – 240
Demold Time (minutes) 15 – 30
Storage and Shelf Life
Packaging
Component A: 55 gallon steel drum (closed top) 500 lbNet Weight
275 gallons plastic totes 2500 lbNet Weight
Component B: 55 gallon steel drum (closed top) 450 lbNet Weight
275 gallons plastic totes 2250 lbNet Weight
Components A and B should be kept well sealed in a dry place at a temperature between 55 and
90 F. Shelf life of unopened containers is 6 (six) months from a manufacturing date. Purge opened
containers with dry nitrogen before resealing.
Refer to SDS of the product for more information.
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc.
assumes no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish
the suitability of any product for its intended use.
HP 8208 is Medium density rigid polyurethane molding foam system designed for processing through
plural component dispensing equipment. This material is Eco Friendly due to no HCFC`s or HFC`s.
This product is recommended for molding intricate decorative simulated wood furniture parts,
moldings, picture frames and other decorative parts. HP 8208 easily accepts paints and stains.