25RS1202B-D_TDS.pdf

Date: 8/24/18
RS 1202
Product Information
Physical Properties (Components)
Component A Component B
Viscocity at 75 F (cps) 180 – 220 600 – 800
Specific Gravity (gr/ml) 1.22 – 1.24 1.04 – 1.07
Physical Properties (Final Product)
Free Rise Density (pcf) 2.30 – 2.50
K-Factor (ASTM C-177) 0.18 – 0.20
Closed cell content (ASTM D-1940) Over 93%
Compressive Strength (psi) (ASTM D-1620) 37
Tensile Strength (psi) (ASTM D-1623) 59
Handling Characteristics
Mix Ratio by Weight (A/B) 50 / 50
Cream Time at 75 F(seconds) 3 – 4
Rise Time (seconds) 10 – 12
Tack Free Time (seconds) 10 – 12
90% Cure Time (hours) 4
Storage and Shelf Life
Packaging
Component A: 55 gallon steel drum (closed top) 500 lb Net Weight
275 gallon plastic totes 2500 lb Net Weight
Component B: 55 gallon steel drum (open top) 450 lb Net Weight
275 gallon plastic totes 2250 lb Net Weight
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc.
assumes no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish
the suitability of any product for its intended use.
RS 1202 is a two-component CFC, HCFC and HFC free polyurethane foam designed for Spray in
place applications. This formulation is recommended where thermal insulation and environmentally
friendly efficient products are required. RS 1202 Spray in place foam system shall be applied in half
inch passes or less, maximum 1 inch passes, using standard plural component polyurethane foam
high pressure, impingement mix temperature controlled equipment.